Finder. Console Message "No icon found :("

Hi all!
I have iMac11,2, Mac OS X 10.6.7
Sorry, English is not my native language, so to better understand situation, describe steps that I do.
I mount any DMG image, automatically opens a Finder window and displays contents of that image. I unmount DMG image did not close this window. Either through mouse right-click menu or drag across disk icons to Trash. Image unmounted, but a Finder window is not closed. It is empty and close it does not - the buttons in the upper left-hand side of window is not active. Saves only restart Finder.
If I unmount the DMG image from the Finder sidebar or to unmount close the window - so no problem.
Looked into the console - there's a lot of messages from Finder "No icon found: (". An experimental found that these messages are connected with the situation described above, but that was the reason that caused all this, could not find...
Was anyone has a similar problem? Are there any solutions?
Thanks!

Something has messed with the PATH envrionment variable.
You should ensure first Oracle Home works fine, next the other oracle home. This is a frequent issue when dealing with more than one oracle home, environments can be mixed without a warning. From the error message:
I get the message 850 not found; No message file for product=NETWORK, facility=NL message if I try to run lsnrctl; I see a lot of suggestion that this is a problem with the ORACLE_HOME setting - thus my question below.
It means Oracle is executing binaries at a home directory and is trying to obtain error message text from another, so it is a symptom OracleHomes are mixed.
Please check the PATH environment variable and explicitly set it before you attempt to start your listener and database.
Once you have been successful with this first oracle home, continue with the other, same issue. reset environment variables to a suitable value.
On the other hand 00850 doesn't look like an oracle kernel error message, but rather an EM error. When you attempted to start your EM it culd be trying to obtain binaries from the second Oracle Home. Same issue, verify and explicitly set PATH environment variable before attempting to start EM.
~ Madrid.

Similar Messages

Strange Console message: GetMenuRefTable not found in header

I noticed many references to "GentMenuRefTable" in console.log. I did search this string in Google, but came up empty. Has anyone else seen this? Is this a problem? I think that only Apple's applications are writing this message, so I'm afraid it could be serious.
<pre>
Mail[266]: [FC] GetMenuRefTable not found in header
Property List Ed[281]: [FC] GetMenuRefTable not found in header
Property List Ed[281]: [FC] GetMenuRefTable not found in header
Safari[301]: [FC] GetMenuRefTable not found in header
Safari[301]: [FC] GetMenuRefTable not found in header
Keynote[391]: [FC] GetMenuRefTable not found in header
Keynote[391]: [FC] GetMenuRefTable not found in header
Keynote[394]: [FC] GetMenuRefTable not found in header
Keynote[394]: [FC] GetMenuRefTable not found in header
Pages[398]: [FC] GetMenuRefTable not found in header
Pages[398]: [FC] GetMenuRefTable not found in header
Keynote[402]: [FC] GetMenuRefTable not found in header
Keynote[402]: [FC] GetMenuRefTable not found in header
System Profiler[467]: [FC] GetMenuRefTable not found in header
System Profiler[467]: [FC] GetMenuRefTable not found in header
System Profiler[494]: [FC] GetMenuRefTable not found in header
System Profiler[494]: [FC] GetMenuRefTable not found in header
iTunes[498]: [FC] GetMenuRefTable not found in header
iTunes[498]: [FC] GetMenuRefTable not found in header
iTunes[498]: [FC] GetMenuRefTable not found in header
Property List Ed[527]: [FC] GetMenuRefTable not found in header
Property List Ed[527]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Finder[731]: [FC] GetMenuRefTable not found in header
Console[1225]: [FC] GetMenuRefTable not found in header
Console[1225]: [FC] GetMenuRefTable not found in header
</pre>
Macbook Pro Mac OS X (10.4.8)

Hi, BanzaiMan. Welcome to the Discussions.
I've not seen the GetMenuRefTable message and, like you, I've been unable to find any documentation for it.
1. It's possible that the cause is related to some errant Startup or Login Item, perhaps some third-party code you've installed. My "Troubleshooting Startup and Login Items" FAQ can help you pin that down if such an item is causing the problem.
2. Check asl.log (available under the /var/log list in the Logs list in Console) to see if there are any corresponding entries containing GetMenuRefTable. If so, the Level value will tell you if this is a problem.
For example, the system.log message:
Dec 17 10:24:10 PMG5 lookupd[435]: lookupd (version 369.5) starting - Sun Dec 17 10:24:10 2006
has the following corresponding entry in asl.log:
[Time 2006.12.17 16:24:10 UTC] [Facility netinfo] [Sender lookupd] [PID 434] [Message lookupd (version 369.5) starting - Sun Dec 17 10:24:10 2006] [Level 5] [UID -2] [GID -2] [Host PMG5]
The time stamps are different as messages recorded in asl.log are posted in GMT (Zulu) time, not local time.
The [Level 5] value indicates it is a Notice type message, i.e. a normal but significant condition, sort of a "strong FYI." Generally, messages with a Level of 5 or more can be ignored. The value of Facility may also provide more info concerning what is generating the message.
Note that messages recorded in console.log may not have a corresponding entry in asl.log, but it's worth a look.
Note that some of the information above is from the "System Logging"" appendix of my book, Troubleshooting Mac® OS X, Tiger Edition.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X
Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
I may receive some form of compensation, financial or otherwise, from my recommendation or link.

IPhoto hangs, found Console message

Though I'm a Mac user for over 10 years, I'm no good when deciphering Console jargon or attempting a Terminal command. My iPhoto has (as well as most everything else with Mavericks) been unusually slow when opening, importing, changing folders, editing, tagging, opening a slideshow, etc...pretty much in every way.
I opened Console as advised and found this repeated message (happening 4-5 times per second) while I was either opening iPhoto or importing 3 photos:
11/12/13 8:47:57.000 AM kernel[0]: Sandbox: mdworker(3284) deny file-read-data /Users/jchadwickwilliams/Pictures/iPhoto Library/Contents/PkgInfo
11/12/13 8:47:57.000 AM kernel[0]: Sandbox: mdworker(3284) deny file-read-data /Users/jchadwickwilliams/Pictures/iPhoto Library/Contents/PkgInfo
the final line of text that stopped this repeated text was:
11/12/13 8:48:31.961 AM WindowServer[125]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
Any ideas what any of this means? I'm really at a loss with this data...looks like something in my iPhoto library is invalid?
I know this next question shouldn't be in the iPhoto section, but perhaps it is related somehow.
I don't recall what I was doing at the time, but one minute prior to the iPhoto messages, I noted these messages alternatiing over 60 times:
11/12/13 8:26:58.000 AM kernel[0]: Sandbox: com.apple.qtkits(3138) deny file-write-create /Users/jchadwickwilliams/Library/Frameworks/TempEWSFile
11/12/13 8:26:58.000 AM kernel[0]: Sandbox: com.apple.qtkits(3138) deny file-write-create /Library/Frameworks/TempEWSFile
11/12/13 8:26:58.000 AM kernel[0]: Sandbox: com.apple.qtkits(3138) deny file-write-create /Users/jchadwickwilliams/Library/Frameworks/TempEWSFile
11/12/13 8:26:58.000 AM kernel[0]: Sandbox: com.apple.qtkits(3138) deny file-write-create /Library/Frameworks/TempEWSFile
11/12/13 8:26:58.000 AM kernel[0]: Sandbox: com.apple.qtkits(3138) deny file-write-create /Users/jchadwickwilliams/Library/Frameworks/TempEWSFile
It seems I've got some major issues. A point in the right direction would be GREATLY appreciated.
Thanks,
C

OOOKKKAAAY, I exported a slideshow this afternoon (about 800 photos) and as has been the case for a couple years, it took forever....the second half of the exoprt had no preview screen, just a black box. It must have taken 2 hours.
I just looked at Console and found a MOUNTAIN of errors. One thing I noticed about the exported slideshow is that some of my preferences for individual slides were not maintained and the show went on as if I didn't edit/alter the overall theme of the slideshow. I went back and personalized each slide setting again to find they sometimes worked in preview mode, but then when I returned, my preference for the slides were missing. FRUSTRATING. And so are those obscenely replicating Console messges...I'll throw out a few that have taken over my screen real estate:
11/12/13 7:36:40.622 PM sandboxd[1405]: ([1151]) com.apple.qtkits(1151) deny file-read-data /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/Resources/Content/Audio/KenBurns.m4a/..namedfork/rsrc
11/12/13 7:35:41.203 PM sandboxd[1405]: ([1151]) com.apple.qtkits(1151) deny file-read-data /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/Resources/Content/Audio/KenBurns.m4a/..namedfork/rsrc
11/12/13 6:39:20.570 PM WindowServer[121]: disable_update_timeout: UI updates were forcibly disabled by application "iPhoto" for over 1.00 seconds. Server has re-enabled them.
11/12/13 7:34:44.000 PM kernel[0]: Sandbox: com.apple.qtkits(1151) deny file-issue-extension /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/Resources/Content/Audio/KenBurns.m4a
11/12/13 6:12:31.000 PM kernel[0]: Sandbox: com.apple.qtkits(1151) deny file-read-data /Users/jchadwickwilliams/Pictures/iPhoto Library/Previews/2013/10/27/20131027-175254/cL6FQkeDRLew2BPnu1NA7g/IMG_4821.MOV /..namedfork/rsrc
11/12/13 7:30:00.128 PM mdworker[1690]: (Normal) Import: Using too many resources after 2048 files (wired: 0 resident: 2609 swapped: 0 regions: 2069), hit usage threshold importing /Users/jchadwickwilliams/Pictures/iPhoto Library/Database/Faces/Detected/B3VS0xKQT+uFV1fVcuHvUw.apdetected, exiting to clean up now.
11/12/13 6:48:51.554 PM mdworker[1539]: (Normal) Import: Using too many resources after 2048 files (wired: 0 resident: 2676 swapped: 0 regions: 2073), hit usage threshold importing /Users/jchadwickwilliams/Pictures/iPhoto Library/Thumbnails/2008/Sep 15, 2008/bilde-5.jpg, exiting to clean up now.
11/12/13 7:02:50.178 PM iPhoto[1148]: *** WARNING: -[NSImage dissolveToPoint:fraction:] is deprecated in MacOSX 10.8 and later. Please use -[NSImage drawAtPoint:fromRect:operation:fraction:] instead.
11/12/13 7:25:20.851 PM sandboxd[1405]: ([1151]) com.apple.qtkits(1151) deny file-read-data /Applications/iPhoto.app/Contents/Frameworks/iLifeSlideshow.framework/Versions/ A/Resources/Content/Audio/KenBurns.m4a/..namedfork/rsrc
I'm getting denied a lot on my own system. And it seems my system doesn't have sufficient ability to handle the workload as I see I'm using, "too many resources after 2048 files".
I think I'm going to try to rebuild my entire database. What have I got to lose? iPhoto worked FAR BETTER as a guest user. Does htis mean I should toss my plist files?
And as always...computer connoisseurs, child prodigies, insightful sages, and holy healers are all encouraged to respond (as is anyone else with mindful advice, I'm not that picky).
Thanks for throwing me a life-line,
C

New Message Icon - Can't find the messages! :)

Okay so I've had my BlackBerry Curve 8310 for a week now. Just been tooling around with it to learn how it works on my own. Today I was trying to register the BIS to log into my email account to create a filter to stop sending my Gmail Sent mail back to my phone (so annoying). Anyway, Tried registering as a new user via PC. I entered my PIN and IMEI and it told me that an account already existed for that PIN. I thought that was strange, I hadn't registered before? SO just out of curiousity I clicked on the 'forgot my password' link and had it sent to my phone. I see an icon saying I have a new messge however I cannot FIND the message. Thought I did something stupid or wrong so I clicked resend for the password and again I see now I have two and then three new messages (third time is supposed to be the charm right?) on the icon but can't find these messages! I looked in SMS/MMS folder, looked in Gmail and BlackBerry mail folders but still cannot locate these messages! Where the heck did they go??
BTW I finally registered with the BIS through my phone and was able to complete it there and then logged onto my PC and created the filter I wanted. So I'm cool with that. I just need to get that stupid new message icon off my phone. Dunno if it helps but when I get new emails, the number on the message icon increases, so it must be something to do with email..?
Please Help!
ss

trinityc_0925 wrote:
i actually tried that.. and it tells me that i have NO UNREAD MESSAGES but the icon is STILL there! help please!
Hi and Welcome to the Forums!
Try this:
Homescreen > Messages > > Search
Set as follows (may vary depending on your device OS level):
Search Type: Local
Name In: Any Address Field
Subject Message: <leave blank>
Include Encrypted Messages: Yes
Service: All Services
Folder: All Folders
Show: Unopened Only
Type: All
That should return to you all unopened messages from all message conduits.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

I have a problem with my iphone,after upgrade software ios 6.0.1, is not possible to use the wi-fi, used until now, because is not possible to have the login, i find this message " the requested URL was not found

You have to go to autherized iPhone agent.

Site gives message Server not found; ;Firefox can't find the server at (site name). Address is correct, network is connected. Don't have problems with most sites. Others can access this particular site easily.

Can't open any of the National Parks Service Civil War Soldiers and Sailors Systems sites. Get the message Server not found although others are able to open it easily. Network connection is good and addresses are good.
== URL of affected sites ==
http://www.civilwar.nps.gov and all National Parks Service Civil War Soldiers and Sailors System

Such behavior can be an indication that you are infected.<br />
In such a case you can use another computer to download the program and save the file to an USB stick.<br />
Be sure to download the latest databases.
You can try an online anti-virus scanner.
* http://www.google.com/search?q=Online%20Antivirus%20Scanner
* http://housecall.trendmicro.com/ HouseCall - Free Online Virus Scan - Trend Micro USA
* http://vms.drweb.com/online/?lng=en Dr.Web - innovation IT-security solutions. Complex protection against Internet threats.
* http://www.eset.com/onlinescan/ - Free ESET Online Antivirus Scanner

Apple mail search finds the message but cannot show its content, why?

Hi
I have a MacBook Pro with Mountain Lion installed on it. All the updates are also installed.
The problem is that I can quickly find a message among 100,000 messages sorted in different folders in Apple Mail, but as I click on the message, it keeps showing "loading..." and never shows the content of that message.
When I manually go to that message, Mail shows the content properly. So it happens only when I try to see the content of the message that has been found through search function.
Any ideas?
thanks,
Farshid

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
Enter "mdworker" (without the quotes) in the Filter text field. Select the most recent 50 or so messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are long runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Some personal information, such as the names of your files, may be included — anonymize before posting.
Step 2
Do the same with the search string "mds".

Console message repeating systemuiserver invalid kmditempath

I found a similar question here:
https://discussions.apple.com/message/11514792?searchText=Console%20message%20re peating%20systemuiserver%20invalid%20kmditempath#11514792
But my problem is different.
I was writing an iPhone app for a client. One of the images the client provided strangely appeared in my finder window under favorites. I don't remember placing there, but when I saw it, I dragged it out of the finder to remove it.
After that, I remembered the project was finished, and dragged it to a 'completed projects' folder.
Now (some time later) I'm seeing this console message repeat over and over:
SystemUIServer: Invalid kMDItemPath for TheApp.app
SystemUIServer: Invalid kMDItemPath for (null)
SystemUIServer: problem with path ???
Any way to remove this?

If you've moved any of those applications out of the Applications folder, put them back. Then do as follows.
From the menu bar, select
 ▹ System Preferences ▹ Spotlight ▹ Privacy
The list of items excluded from Spotlight indexing is shown (it may be empty.) Click the plus (“+”) icon to add an item to the list. Select your volume (under DEVICES) and add it to the list. Then remove it from the list by selecting it and clicking the minus (“-“) icon.
Spotlight will rebuild the index. If you try to do a Spotlight search now from the magnifying-glass icon in the top right corner of the display, a pulsing dot will appear in the icon. When the dot disappears, the indexing is complete.

Message 2100 not found; No message file for product=RDBMS, facility=UL

Hi,
I am trying to run sqlldr. But I got this message:
Message 2100 not found; No message file for product=RDBMS, facility=UL;
I checked my ORACLE_HOME and it is set to: C:\oraclexe\app\oracle\product\10.2.0\server which includes the folders BIN,RDBMS, ....
I checked my C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS and there is no ORAUS.MSG inside the folder. If this is the solution where can I find this file? I read in the forums to copy it from the server directory to the client, but I couldn't find it anywhere on my machine.
Thanks,
M

Thansk, I really appreciate your help. This is the result:
AGSDESKTOPJAVA=C:\Program Files (x86)\ArcGIS\Desktop10.0\
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\Matt\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=Smith
ComSpec=C:\Windows\system32\cmd.exe
DEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\Matt
JAVA_HOME=C:\Program Files\Java\jdk1.6.0_23
LOCALAPPDATA=C:\Users\Matt\AppData\Local
LOGONSERVER=\\Smith
NUMBER_OF_PROCESSORS=2
ORACLE_BASE=C:\oraclexe\app\oracle
ORACLE_HOME=C:\oraclexe\app\oracle\product\10.2.0\server
ORA_NLS=C:\oraclexe\app\oracle\product\10.2.0\server\nls
OS=Windows_NT
Path=C:\XEClient\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows
\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerSh
ell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\MATLAB\R
2010a\runtime\win64;C:\MATLAB\R2010a\bin;C:\Program Files (x86)\Common Files\Rox
io Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\10.0\DLLSh
ared\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 15 Model 6 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=15
PROCESSOR_REVISION=0602
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
RoxioCentral=C:\Program Files (x86)\Common Files\Roxio Shared\10.0\Roxio Central
36\
SESSIONNAME=Console
SQLPATH=C:\XEClient\sqlplus
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\Matt\AppData\Local\Temp
TMP=C:\Users\Matt\AppData\Local\Temp
USERDOMAIN=Smith
USERNAME=Matt
USERPROFILE=C:\Users\Matt
VS100COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 10.0\Common7\Tools
VS90COMNTOOLS=C:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
VSEDEFLOGDIR=C:\ProgramData\McAfee\DesktopProtection
windir=C:\Windows

The ovmcore-console libraries were not found on the system!!

Hi all,
I need help to open serial console from Oracle VM Manager GUI.
I'm using the beta version 3.3 of Oracle VM Manager and the agent with Oracle VM Server 3.1 installed on a SPARC Enterprise T5240.
I created a virtual machine with the manager, but when i try to launch serial console i have the following message:
"Error 404: Page not found.
The ovmcore-console libraries were not found on the system.
Please install the correct ovmcore-console rpm suitable for your system on the Manager server.
See the Oracle VM Installation Guide for additional information."
any help ?

Thank you for testing Oracle VM Manager 3.3 beta.
We are still reviewing ovmcore-console package and have not made it public yet. Meanwhile, please use the following workaround to access the VM console:
You can redirect the remote port to local using the ssh(1) command.
1) From Oracle VM Manager UI, find out the UUID of the virtual machine. For example: 0004fb0000060000e98127266687b615.
2) Log into Oracle VM server (dom0), use xm list command to get the domain id. In this example, the domain id is 2. The VNC port number will be 59xx, starting with 5900.
# xm list -l 2 |grep 59
(location 127.0.0.1:5900)
3) From your own desktop, then you can execute the command in a local shell to redirect the port to your desktop:
$ ssh -L 12345:localhost:5900 -N -f root@OVS
4) The "5900" port will be redirected to "12345" of your local desktop, so that you can run the following command to connect the guest console:
$ vncviewer local:12345
5) For Windows, you can set up an ssh tunnel by using PuTTY for example.

Mac RDP Client (v8.0.10 on 10.10.1): HTTPEndPointException: 4, The non-proxy http connection failed to connect with the message: 404 Not Found

My office is setting up a new gateway server. I can connect to the old one just fine, but the new one is not allowing me to connect. I can connect from my Windows VM, but not my Mac Client.
This is the log:
2014-Nov-26 16:09:10] RDP (0): Final rdp configuration used: gatewayhostname:s:gat1.gibbscam.com
screen mode id:i:0
use multimon:i:0
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 16:09:10] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:10] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:10] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:10] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:10] RDP (0): correlation id: d8afdeb7-ce3a-ceff-a6e8-51a5d5b40000
[2014-Nov-26 16:09:10] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:15] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 16:09:15] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 16:09:15] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 16:09:15] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:65fb:7056:64eb:4363 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 16:09:15] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 16:09:15] RDP (0): correlation id: 3d81bcf6-8d0e-fba8-b75e-bd2a247c0000
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Resolved 'gat1.gibbscam.com' to '12.167.61.34' using NameResolveMethod_DNS(1)
[2014-Nov-26 16:09:15] RDP (0): Exception caught: Exception in file '../../librdp/private/httpendpoint.cpp' at line 305
    User Message : HTTPEndpointException: 4, The non-proxy http connection failed to connect with the message: 404 Not
Found
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 16:09:15] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 16:09:16] RDP (0): ------ END ACTIVE CONNECTION ------
And here's a log for server that I can connect to:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used: gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
audiomode:i:2
username:s:Gibbs\JeremyS
disable wallpaper:i:0
disable full window drag:i:0
disable menu anims:i:0
disable themes:i:0
alternate shell:s:
shell working directory:s:
authentication level:i:2
connect to console:i:0
gatewayusagemethod:i:1
disable cursor setting:i:0
allow font smoothing:i:1
allow desktop com"font-family:Helvetica;line-height:normal;" />redirectprinters:i:0
bookmarktype:i:3
use redirection server name:i:0
[2014-Nov-26 15:52:20] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:20] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:20] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:20] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:20] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:20] RDP (0): correlation id: 3bea4411-4b23-c197-9b52-63f948a10000
[2014-Nov-26 15:52:20] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:25] RDP (0): Exception caught: Exception in file '../../librdpclient/asiosocketendpoint.cpp' at line 521
    User Message : Unable to connect to remote PC. Please provide the fully-qualified name or the IP address of the remote
PC, and then try again.
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:25] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:25] RDP (0): ------ END ACTIVE CONNECTION ------
[2014-Nov-26 15:52:25] RDP (0): --- BEGIN INTERFACE LIST ---
[2014-Nov-26 15:52:25] RDP (0): lo0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=::1 netmask=ffff:ffff:ffff:ffff:ffff:ffff:ffff:ffff
[2014-Nov-26 15:52:25] RDP (0): lo0 af=2 (AF_INET)  addr=127.0.0.1 netmask=255.0.0.0
[2014-Nov-26 15:52:25] RDP (0): lo0 af=30 (AF_INET6)  addr=fe80::1%lo0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): gif0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): stf0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=fe80::1240:f3ff:fe97:e0b2%en1 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:1240:f3ff:fe97:e0b2 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=30 (AF_INET6)  addr=2605:e000:63c2:f800:d111:af1b:b193:8d4e netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): en1 af=2 (AF_INET)  addr=192.168.0.5 netmask=255.255.255.0
[2014-Nov-26 15:52:25] RDP (0): fw0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): en2 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): p2p0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): bridge0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=18  addr= netmask=
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fe80::ec38:250a:2a5d:3618%utun0 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): utun0 af=30 (AF_INET6)  addr=fd68:4c46:7658:e98e:ec38:250a:2a5d:3618 netmask=ffff:ffff:ffff:ffff::
[2014-Nov-26 15:52:25] RDP (0): --- END INTERFACE LIST ---
[2014-Nov-26 15:52:26] RDP (0): correlation id: 509122b5-d9b1-60f0-a0ac-b75a8dc20000
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolConnectingNetwork(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Resolved 'gato.gibbscam.com' to '12.167.61.35' using NameResolveMethod_DNS(1)
[2014-Nov-26 15:52:26] RDP (0): Protocol state changed to: ProtocolNegotiatingCredentials(2)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolConnectingRDP(3)
[2014-Nov-26 15:52:27] RDP (0): Protocol state changed to: ProtocolInactive(4)
[2014-Nov-26 15:52:28] RDP (0): Server supports RAIL
[2014-Nov-26 15:52:28] RDP (0): Protocol state changed to: ProtocolActive(5)
[2014-Nov-26 15:52:29] RDP (0): Server hides cursor
[2014-Nov-26 15:52:31] RDP (0): Server shows cursor
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnecting(7)
[2014-Nov-26 15:52:35] RDP (0): Protocol state changed to: ProtocolDisconnected(8)
[2014-Nov-26 15:52:35] RDP (0): ------ END ACTIVE CONNECTION ------
Any suggestions on what I can ask my IT department to change on the server so I can connect would be greatly appreciated.

Hi Jeremy,
Thank you for posting in Windows Server Forum.
From the error and other description it seems that there is some misconfiguration with setup. You need to provide the FQDN name of the server as might server name is not resolving its name properly and so facing issue. As seems from below details:
[2014-Nov-26 15:52:20] RDP (0): Final rdp configuration used:gatewayhostname:s:gato.gibbscam.com
screen mode id:i:0
use multimon:i:1
session bpp:i:24
full address:s:dev-JeremyS2.gibbs.local
Configuration used and full address name both appears different so please verify configuration accordingly.
Please check the DNS record, check certificate whether it match FQDN name of the server with certificate name, also try to check to connect with IP address and see what result you can find.
You can follow below guide to configure RD Gateway and after that verify the result.
1. Deploying Remote Desktop Gateway RDS 2012
2. How To Work with RD Gateway in Windows Server 2012
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

I keep getting this Console message, constantly repeating. What does it mean and how do I fix it?

This Console message repeates endlessly. I suspect this may be one of the reasons this machine is running slowly? In any event, doesn't seem normal to have an endlessly repeating error message.
7/21/13 3:51:38 PM com.apple.launchd[1] (scManagerD[81914]) posix_spawn("/Applications/SafeConnect.app/Contents/MacOS/scManagerD", ...): No such file or directory
Any help is appreciated.

You have something installed called "SafeConnect?" Or did you remove it but not use the uninstaller?
Uninstalling Software: The Basics
Most OS X applications are completely self-contained "packages" that can be uninstalled by simply dragging the application to the Trash. Applications may create preference files that are stored in the /Home/Library/Preferences/ folder. Although they do nothing once you delete the associated application, they do take up some disk space. If you want you can look for them in the above location and delete them, too.
Some applications may install an uninstaller program that can be used to remove the application. In some cases the uninstaller may be part of the application's installer, and is invoked by clicking on a Customize button that will appear during the install process.
Some applications may install components in the /Home/Library/Applications Support/ folder. You can also check there to see if the application has created a folder. You can also delete the folder that's in the Applications Support folder. Again, they don't do anything but take up disk space once the application is trashed.
Some applications may install a startupitem or a Log In item. Startupitems are usually installed in the /Library/StartupItems/ folder and less often in the /Home/Library/StartupItems/ folder. Log In Items are set in the Accounts preferences. Open System Preferences, click on the Accounts icon, then click on the LogIn Items tab. Locate the item in the list for the application you want to remove and click on the "-" button to delete it from the list.
Some software use startup daemons or agents that are a new feature of the OS. Look for them in /Library/LaunchAgents/ and /Library/LaunchDaemons/ or in /Home/Library/LaunchAgents/.
If an application installs any other files the best way to track them down is to do a Finder search using the application name or the developer name as the search term. Unfortunately Spotlight will not look in certain folders by default. You can modify Spotlight's behavior or use a third-party search utility, EasyFind, instead.
Some applications install a receipt in the /Library/Receipts/ folder. Usually with the same name as the program or the developer. The item generally has a ".pkg" extension. Be sure you also delete this item as some programs use it to determine if it's already installed.
There are many utilities that can uninstall applications. Here is a selection:
    1. AppZapper 2.0.1
    2. AppDelete 3.2.6
    3. Automaton 1.50
    4. Hazel
    5. AppCleaner 2.1.0
    6. CleanApp
    7. iTrash 1.8.2
    8. Amnesia
    9. Uninstaller 1.15.1
10. Spring Cleaning 11.0.1
For more information visit The XLab FAQs and read the FAQ on removing software.

Find Soap Message Output Format

Hi,
I am trying to send message with receiver soap adapter to the client but the message i have in sxmb_moni is different than the one the client receives. I found this weblog that could help finding the message that is going out of the adapter : /people/varadharajan.krishnasamy/blog/2007/01/09/troubleshooting-soap-message--xi but when i open the application enter values and click on add nothing happens.
Have someone already done this or knows how to see the output soap message?
Best regards,
Laurent.

Hi Laurent,
Use Messaging System servlet..
http://<host_XI>:<port>/MessagingSystem (case sensitive)
Find your message, click Message Details (eye icon) , then Display Message Bytes
Peter

TimeMachine Console messages lie!?

Mac OS 10.6.8 on a MacBook Pro 13"
I have just spent an incredibly frustrating week trying to solve what I now believe to be a non-problem on my machine, caused by the messages TimeMachine writes (or, perhaps, doesn't write) to the Console log. I would like to understand what was actually going on, and am hoping someone out there can help fill in the blanks.
A friend with a 15" MBP, also running 10.6.8, was having severe TimeMachine problems -- backups taking 2 hours to complete after minimal changes to the disk. We discovered how to filter Console messages so that we were only seeing TM messages (File->New Database Search then "Sender Contains backupd" in the Database Search window). Initially we found that TM was copying 165,000+ files for a total backup size in the KB or at biggest, a few MB. I started using my MBP as a temporary staging disk in extracting backups in trying to solve the problem on his machine.
In the end we reformatted his disk and reinstalled the system off his DVD. After the initial, expected long backup we did another one, just to see what was transferred that time. No more huge numbers of files...sighs of relief. One further backup, just to make sure, and...uh-oh: the numbers of files being transferred in both manual backups were identical. For a machine which contains upwards of 700,000 files, this did not seem reasonable, so we considered that the problem had only been reduced in severity.
Then I decided to run a quick pair of backups on my machine, just to check that this behaviour was not somehow being transferred to mine during the extraction of backups mentioned above. Whereas the Console messages for previous backup runs (from other days) reported different numbers of files, suddenly my machine was also exhibiting this strange behaviour of transferring the same numbers of files on every backup. The numbers of files differed depending on the machine, but the pattern was constant for a given machine. The usual pattern was that x number of files was transferred in the first backup pass (it appears that TM nearly always performs two passes, even though its window in System Prefs does not always show this) and then y number of files was transferred in the second pass. An immediate subsequent backup would again show x files in the first pass and y files in the second. And so on. Sometimes the quantity of bytes transferred also followed this pattern, but not always.
The reason that I say "usual", "sometimes" and "always" above is that at that point we discovered that one can restore a system "wholesale" from a TM
backup, via the item in the Utilities menu when the machine is started up from the system DVD. We had known clean backups to go back to, and our days then devolved into a pattern of (1) reformatting the HD, then (2) doing a wholesale restore from a clean backup, and then (3) trying to migrate files changed since that backup without triggering the strange behaviour (and failing, thus starting all over again).
After several days of this, and a migration attempt performed with pairs of backups after each change migration, and migrating the changes as "manually" as possible (i.e. not copying or moving files in the Finder, but instead opening the newer version, copying the contents, opening the older version, replacing the contents, then saving) and finding that even that did not prevent the strange behaviour, we started looking for utilities which operate on TM backups. We found TimeTracker and BackupLoupe, and finally were able to see what was actually in the backups.
Imagine our surprise to find that for a backup which produced the following Console messages:
17/08/12 11:12:22 am          com.apple.backupd[1751]          Starting standard backup
17/08/12 11:12:22 am          com.apple.backupd[1751]          Backing up to: /Volumes/Rugged/Backups.backupdb
17/08/12 11:12:23 am          com.apple.backupd[1751]          No pre-backup thinning needed: 5.06 GB requested (including padding), 495.96 GB available
17/08/12 11:12:29 am          com.apple.backupd[1751]          Copied 1160 files (3 KB) from volume Nickee's MacBook.
17/08/12 11:12:30 am          com.apple.backupd[1751]          No pre-backup thinning needed: 5.06 GB requested (including padding), 495.96 GB available
17/08/12 11:12:36 am          com.apple.backupd[1751]          Copied 1160 files (164 bytes) from volume Nickee's MacBook.
17/08/12 11:12:39 am          com.apple.backupd[1751]          Starting post-backup thinning
17/08/12 11:12:40 am          com.apple.backupd[1751]          Deleted backup /Volumes/Rugged/Backups.backupdb/Nickee’s MacBook Pro/2012-08-16-151757: 495.96 GB now available
17/08/12 11:12:40 am          com.apple.backupd[1751]          Post-back up thinning complete: 1 expired backups removed
17/08/12 11:12:40 am          com.apple.backupd[1751]          Backup completed successfully.
that the actual contents appear to be this: (both programs report the same contents, so either they are both wrong or they are both right)
If we assume that both programs are right, then one must inescapably conclude one of the following two things about the TM messages in the Console:
(1) they are lies
(2) they are not the whole truth: that TM is indeed transferring those numbers of files, and then for some reason deleting most of them (and not reporting this)!
This begs the questions:
(a) If the files really are being transferred, then why is it the same number of files every time, the same pattern to each backup, when the backups are being initiated one after the other, i.e. surely there isn't the time for such numbers of files to be changed, and surely it isn't possible that it's exactly the same numbers of files every time?
(b) If the vast majority of files transferred are being deleted, why? And why are they being transferred in the first place?
(c) If this is happening, why is the Console not advising of this? TM appears to fulsomely report its behaviour -- why would it not report this?
(d) What on earth are these files in any case?
Any help in getting closer to an understanding of this phenomenon would be gratefully received. Having just lost literally a week of our lives to it, it would be satisfying to at least know what it was!

The number of files is always somewhat high. We suspect it's counting metadata (such as permissions, extended attributes, etc.) separately. Ordinarily that doesn't indicate a problem.
And yes, Time Machine often makes a second "pass," if changes were made during the first one. Often it's so quick you won't see the messages on the preferences window, or if the sizes are about the same, you may not realize that they changed.
However, if you frequently get file counts in the area of many thousands, with only a few KB or MB, that take extremely long, you may have a problem that seems unique to some users running 10.6.8. A few of them were able to solve it by re-installing Snow Leopard, but only going back to 10.6.7, not 10.6.8, via the "combo" update. See Installing the ''combo'' update and/or Reinstalling OSX.
If you do go back to 10.6.7, be aware of the 3rd item in #D5 of Time Machine - Troubleshooting.

+3,000 Mail.app Notes Sync Console Messages

Hi!
Thanks for looking at my question!
I seem to be generating +3000 console messages every few days that almost all relate to syncing, particularly notes sync, errors from Mail.app. I do not know how to decipher these messages to find the root of the problem. I have notes sync de-selected on each Mail account as well as de-selected on MobileMe prefs.
How do I avoid Mail continuing to generate these errors?

Well, nothing helped, even with the latest 2 updates where Apple states they fixed bugs in Mail app. Thus I just bought "AirMail" it's very cheap and works awsome with full gmail support.
NB. I've used MS outlook for a while but it was awful, now totally satisfied with "Airmail" it supports notification, very light weight, etc.
cons: I found that it cached all the attachments I have on my gmail.

Finder. Console Message "No icon found :("

Similar Messages

Maybe you are looking for