Finder copies wrong data to DVD after 10.4.7 update.

I need to back up data from a Panasonic P2 Store external USB hard drive partitioned into 15 separate drives. The partitioning is a function of the drive that cannot be changed. OSX sees the partitions as No Name 1, 2, 3 etc.
When I copy the contents of a partition over to a blank DVD-R, finder copies the contents of No Name 1, regardless of which partition I dragged over. This behavior started with the update to 10.4.7, I have over a hundred DVD's burned in this way under 10.4.6 without a problem.
I have posted screen capture video of the problem to youtube...
http://www.youtube.com/watch?v=PThAKQcfhOI
Is there a way to revert to 10.4.6 or can the problem in 10.4.7 be addressed? I can use Toast as a work around and thankfully, the bug does not effect copying the cards to another drive, only through the Finder Burn DVD window.
Thanks,
Filmstox
Dual 2.3 G5 Mac OS X (10.4.7) Panasonic P2 Store
Dual 2.3 G5 Mac OS X (10.4.7)

Hard disks can fail at anytime. And 3 GB is really not enough. Mac OS X needs space to build its swap file. And the more widgets you add, and third party software addons you add, the more space it needs for memory. The Finder crashing is usually an indication that the cache or preference files are getting corrupt, or not visible to the system due to directory issues, or hardware related causes such as a failing hard drive, or even more finicky issues with SCSI drivers. Let me say this much, I've seen SCSI fail really badly in the past, and worst it isn't all that hot swappable as Firewire is. If the terminator is failing or it is not properly terminated SCSI can be a real pain. I've also seen external hard drives which are searchable with Spotlight cause the Finder to freeze or crash and have kernel panics. Add the non-boot drives to Apple menu -> System Preferences -> Spotlight -> Privacy to see if that makes a difference. While it won't be searchable with Find File or Spotlight, you could always use an application like Devon Technologies Easy Find (freeware) instead replace it, if that is important to you.

Similar Messages

HTC One mobile data exceeded limit after 4.4.2 update

After I did the update to go from jellybean to kitkat there is now an icon that stays at the top of my phone that is a triangle with a exclamation point in it and when I click on it is says "mobile data limit exceeded". It goes away for a couple days after the billing cycle recycles but then it comes back. I have never gone over the limit either. Is there a way to get rid of this pesky icon??!!

It isn't the same alert as the data usage alert others are referring to. I'm having the same issue right now, and I moved that alert to a level below my current usage and that alert came up in addition to this alert, and with a different icon. I increased the alert level again and that notification went away but this one stayed. Currently on hold for support for about 45 min..

Importing old pictures with wrong date stamp. After adjusting date they are landing in the correct folder of referenced masters.

I was thrilled to learn that with Aperture I could have one big library and using referenced masters, I can organize the pictures by date so I know where everything is and can backup to the cloud. I started importing really old photos that were taken with god knows what camera and the date is wrong. Since I had all these in date structured folders I could make a best guess on the date - not needing it to be exact, just so it shows up close enough in projects and the original lands in the right folder for future use & backup. I have come to learn that changing the metadata is only referring to how Aperture sees it. In other words, images that were taken on 10/31/04 are still landing in the referenced masters folder on the date the camera said. I now understand that the metadata date is not the date Aperture needs fixed. Is the best way to fix this to delete the images from Aperture, find some tool that will adjust to the approximate real date, then reimport. If so, can someone recommend a utility that does this? If I can fix this inside of Aperture, even better. I saw on one of the discussions: "it's all about the Exif and IPTC and not about the file metatata." Please feel free to learn me on that. Cheers.

That answers some of it - the relocate files. That will allow me to put the files in the right year/month folder. I imported full folders into Aperture so need to edit the metadata date for multiple pictures at the same time. I understand when you select multiple pictures and then ajust time, it adjusts in relation to the first picture. In my case these things were taken by all sorts of crappy cameras & re-edited years later (2003 data). So pictures taken on the same day have 2001, 2003 & 2007 dates. I really do just wnt to set all of them to the same (ballpark) date.
So my goals are:
1) have the pictures land in the right referenced folder - answered
2) do a mass adjust time to the same date for a folder of images
3) have the projects then land chronologically inside Aperture - not sure about this one yet
Thanks for your help, it's very much appreciated.

Some photo's have wrong date on iPhone after importing them. Messes up 'moments' in photo's

When importing photo's from my Mac using iTunes, some of them display the incorrect date in the Moments catagory on my iPhone 5S (7.0.3). For example some photo's say 8th June 2001, when they should say 8th June 2012.
In iPhoto on my Mac these photo's orignally had the incorrect date on them, but I changed them all using Photos > Adjust Time And Date and are all fine in iPhoto.
But when I try and sync them again in iTunes, they are still displaying the incorrect date in Photos on my 5S.
Any help would be appreciated

Had the same Issue and went digging a bit deeper.
It seems that the Collection Feature doesnt grab the EXIF date correctly all the time or relies on the date created of the file directly for some reasons (not sure though).
What you can do to get this fixed:
1. select all your photos in iPhoto
2. Menu: Photos -> Adjust Date and Time
Select Modify Original Files
3. Go up for 1 Second on ALL photos
4. Sync again
5. Go down for 1 SEcond on ALL photos
6. Sync again
In my case it was indeed necessary to sync in between changing the time for 1 second. might work without for you.

IMac won't read the System Install DVD after trying a Software Update (Whic

Last weekend I tried downloading the 10.4.7 update to my iMac. Towards the end of the download the iMac crashed out and said that the Software Update was unsuccessful. As this was the case I tried rerunning the 'Software Update' again but after a few seconds of the application running and the little window being on the screen, it just dropped out and exited. As this was therefore not working I tried to download the Software Update as a Stand Alone application. I found after downloading the file that mounting a disk image on my iMac no longer works. My next step was to try and reinstall OS X from the System Install DVD. I put the DVD in the DVD Drive and found that after it whirred for about 20 seconds, the disk ejected. I thought this was odd so I tried to boot the iMac , holding down the 'C' key once the DVD was in place inside the iMac. The Mac powered up and then the DVD whirred for a while and once again it ejected the DVD. I now have no way of reinstalling OS X..and am at a loss. I called up the supplier of the iMac as I only purchased it in May 2006. They advised me that the warranty only covers Hardware and not Software. They said with a problem like this it could be expensive to try and work out what is causing it as it is sort of an unknown. I would like to know if anyone else has had this problem, is there some way I can see what the iMac is doing when it is trying to read the DVD and the ejects it, and is there some way of 'resetting' the iMac so that it is in the initial state. I know the BIOS on these machines is a 'soft' BIOS so as the supplier said, it is quite possible that the Software Update has corrupted the soft BIOS on the machine. Any ideas?

Yes. It is possible that the DVD could be bad.
It is also possible that your corrupted installation is preventing the DVD from working right.
It would seem strange, except that this happened with another guy as well. But, once we disconnected his internal hard drive with the corrupted OS 10.4.7 install, the machine booted from the DVD and worked properly. We then connected a different hard drive to install to, and it worked fine. Then, we connected the drive as a secondary and formatted it and it resumed working.
But, with an iMac CoreDuo, you cannot open the machine to unplug the drive. So, you'll be a bit stuck if you require the same solution. He had a PowerMac G5.
But, basically, his corrupted OS 10.4.7 installation was preventing booting from a CD, booting into safe mode, booting from an external drive, or any other kind of booting.
So, for him, the only option was disconnecting the internal drive and installing on another one.
I hope this doesn't turn out to be necessary on your system as well. If so, you'll need to take it into the shop for servicing.
The only other option I could think of is to try and boot it into Target Disk mode, and format it's drive with another computer. Perhaps that would work.
Once your internal drive has been cleared (formatted), then it may boot from the DVD again (assuming your problem is the same as the other guys).
You can read about Target Disk Mode here:
http://docs.info.apple.com/article.html?artnum=58583
You can read about the steps we took to troubleshoot and repair the other guys machine here:
http://discussions.apple.com/message.jspa?messageID=2629919#2629919
Perhaps that will help explain what I described above.
I hope this helps.

"Could not activate cellular data network" message after ISO 4.1 update

I updated my iPhone yesterday just like millions of other people, but since the update was completed, I haven't been able to use the data network. Wi-Fi works without any problems, but when I've been out of the house yesterday and today, I haven't been able to establish any connection to the data network and have received the "Could not activate cellular data network" message each time. Is anyone else having this issue too? So much for a flawless update.

Hi,
This happens to me everytime I do a f/w update but for me its for a simple reason and is easy to fix.
I am using a non iPhone Contract SIM in my iPhone and as such is does not like the default iPhone contract APNs for cellular data, hence the message. These reset when you do a f/w upgrade.
I have to go into Settings/General/Network/Cellular Data Network and set the APNs (for data and MMS) to ones given to me by my provider, in this case O2 UK for a non iPhone SIM/Contract - all is then well.
Perhaps you are in a similar situation ?? It shuold be easy to resolve by checking the APNs for your SIM against the ones in the iPhone itself. I found mine by Googling for iPhone O2 APNs. In fact in the end O2 published the setup on their website.
Hope this helps.
Radar.

Aperture 3: GPS data gets lost after 'Update from Master'

My library contains photos in JPEG format that I geotag in Places, then I save the metadata with 'Write IPTC Metadata to Master'. The problem I have is, that the GPS data gets lost after I do an 'Update from Master', even if I saved the metadata before. I'm having this problem with referenced and managed photos and all my JPEGs from several different cameras. The only way to permanently store the GPS info into my photos seems to be to export the geotagged photos as versions.
Does anybody has the same problem or knows how to solve this?
Thanks in advance,
Michael

Use Houdah geo (http://www.houdah.com) to write location data back to the EXIF. It's interface is very similar to Places (Google maps and pins) and you can interface with the Aperture library. It's a bit of a pain, but if you need it done now rather than wait for an Aperture 3 fix, then...
Also, see here: http://www.nickrains.com/index.php?option=com_content&view=article&id=65:apertur e-3&catid=12:news&Itemid=24

How to find out Which LineItem is having the wrong data

Hi All,
This is Idoc--File scenario
Iam sending the Idoc from R/3 and it may have several Line items and related data.
If One line item data is wrong also the Idoc will be errored Out in MONI,for this i used UDF in mapping to through the Exceptions. So i have to goto WE05 in R/3 and i have to check each and every line item for wrong data and then i will repost it.
the thing is how can i find out the Particular line item is caused for this Error.
REgards

Hi Sarvesh,
No, in MONI it will not take us to the correct Lineitem which is having the wrong data.
That is only the problem here.
Any Views.........
Regards

Where to find Pick Release Date After Ship Confirm in Order to Cash cycle

Dear All,
In Order to Cash cycle how to find Pick Release Date. After performing the Ship Confirm Transaction, how to view when we have performed Pick Release Transaction?
Thanks in Advance.
Regards,
Aditya

Run the Diagnostic OM order Information report against the order. In the report you can the find the picked date.
Can I know you are using the transact move order ?
Thanks

I can't find me dvd after windows7 instaling on hp pavilion dv2700.i can't run any dvd or cd.

I can't find the dvd after windows 7 installing,onhp pavilion dv2700. can't run any dvd.

Dear Customer,
Welcome to HP Support Forum and we are glad to assist you.
It looks like you are not able to Boot into the Operating System on your Notebook.
We will surely assist you with this.
Originally the Notebook will have the Recovery Partition and that would give you an option to create a set of Recovery Disk. If you have not created those Recovery Disks when the Notebook was in working condition we cannot do that right now
As of now if you need to recover your Notebook with the new Operating System you can check if the Recovery Partition
is in a working condition or not, If yes you can easily recover/restore your Notebook
If Recovery Partition is corrupted
You need to call HP Technical Support and request for a set of Recovery Disks , So you can recover/restore your Notebook at the earliest
OR
You need call up Microsoft and purchase an Operating System with the License Key, So you can recover/restore your Notebook at the earliest
I strongly recommend you to Contact HP Technical Support over the Phone for further assistance without any delay
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

Migration from PC with MA did not end. Had to shut down MacBookPro. After restart no new user was created. Can't find the transferred data (35 GB). Would like to delete it.

iTunes is required to initially activate the phone. Back when the iPhone 3G was sold, you would take it out of the box and see a "Connect to iTunes" screen. She HAD to connect to a computer in order to begin using the phone. Does she remember what computer this was?

Wrong date after new photo

The new Photo app was installed and some photos and full folders got the wrong date. I could not find a way to edit the date as single photo or from a folder like we had before on iPhoto. Is this something the developers forgot or there is a magic key combination to make it happen?
Best Regards,
GugaRibeiro
Attached a screen shoot with a 2018 picture... the mac is now showing our future pictures...

and to make things even more strange i just logged in to Photos online through icloud and have a picture that was taken last Friday 1st May but online Photos is saying that it was taken 30 December 2014
Photos app on MAC
Photos app on Icloud.com

Is it possible to find the creation date of a CD/DVD burned on Mac OS 8.6 either on newer mac or Windows machine?

I am cataloguing lot of my old music and data cds/dvds. Some of these were created on my old Mac (OS 8.6). I was wondering if there was a way to check the metadata on these discs on my current Windows machine or on a Mac that I have at work to get this information. When I pop the CD and DVDs into the windows machine the dates that show up in the explorer window are actually older than the burn. I assume this is the CD creation date and not the burn date. It's not a huge deal, but it would help me delve deeper into nerd-dom!

One approach would be to have access to a Mac that can run the classic environment or has a pre OS X native installation. These should be able to read the files for dates of creation/modification. There is also SheepShaver that runs on OS X machines.
https://www.macupdate.com/app/mac/20615/sheepshaver
http://en.wikipedia.org/wiki/Classic_Environment
http://www.everymac.com/systems/by_capability/macs-that-support-macos-9-classic. html
https://discussions.apple.com/message/22597899#22597899

I can not find (see) the Data Control Accordion

Hello all,
I cannot find (see) the Data Control Accordion, I just installed the Jdeveloper 11g (Oracle JDeveloper 11g (11.1.1.2.0) - November 2009) from this link http://www.oracle.com/technology/software/products/jdev/htdocs/soft11.html
I started a new ADF BC application, but I cannot find the data control accordion to drag and drop the components I created in the application model. Is there anything I must do after installation (post installation), is there any libraries need to be installed? Please, I need a help to create my application, I’m totally stuck, many thanks for any help.
Kind regards,
Nabil

Shay Shmeltzer wrote:
Can you post an image of your screen so we can see how it looks like?
If you delete the JDeveloper\system11.1.1.2.36.55.36 directory - does your IDE get back to the right way of displaying the data control?Hello,
Many thanks for your reply, kindly find attached screenshots for the two installation of Jdeveloper 11g I have (release 1 & 2), it shows clearly that the “Data Control” is available for release 1, but not available for release 2, even we are talking about the same application!
Regarding the “JDeveloper\system11.1.1.2.36.55.36”, I’m not sure if I have it (attached a list of directories installed), I was not able to find it under my installation directory, therefore I can’t answer your question, but please advise if it could be the reason, how I may have it, do you think there is something wrong with the installation? I noticed that some persons having the same problem before me, so what was wrong, and how they solve it? I appreciate any help please, many thanks.
Regards,
Nabil
P.S. regarding the attached files, sorry I don't know how to attach files to my reply (you may email me at [email protected] so I can send you the screenshots through email, if you please), any help regarding that too will be appreciated.
Directory     Location
o.adf-faces-query-and-lov-dt.11.1.1.2.36.55.36     E:\Oracle11MW\Middleware\jdeveloper\jdev\unit-tests\system11.0.0.0.0
o.adfdt.swingcore.11.1.1.2.36.55.36     E:\Oracle11MW\Middleware\jdeveloper\jdev\unit-tests\system11.0.0.0.0
o.adfm.11.1.1.2.36.55.36
o.adfm.11.1.1.2.36.55.36
o.BC4J.11.1.1.2.36.55.36
o.bm.11.1.1.2.36.55.36
o.css.11.1.1.2.36.55.36
o.diagram.javadoc.11.1.1.2.36.55.36
o.dynamic.faces.11.1.1.2.36.55.36
o.ide.11.1.1.2.36.55.36
o.j2ee.11.1.1.2.36.55.36
o.jdeveloper.11.1.1.2.36.55.36
o.jdeveloper.esdk.11.1.1.2.36.55.36
o.struts.11.1.1.2.36.55.36
o.struts.adf.11.1.1.2.36.55.36
o.xsqldt-ide.11.1.1.2.36.55.36

Calendar List view shows entries under the wrong date

I just upgraded to iOS4 and finding that my calendar entries are appearing under the wrong date in the calendar list view when I am viewing two calendars.
- List view is ok when viewing 1 calendar
- Day and Month views are ok at all times (ie: viewing single or multiple calendars)
- I have 2 Exchange accounts
- Calendar entries are appearing in the correct order, but under the incorrect date heading.
- When I intially added the Exchange accounts the calendar list view was fine at first (I could see both calendars correctly in list view) but after a short time later it became screwed up.
Anyone else experience this?

Same problem here since my upgrade to iOS4 - but I only noticed today.
I have 3 calendars set up:
Gmail (Exchange)
UK Holidays (iCal)
Birthdays
The exchange calendar is always wrong but the other two are correct when my exchange calendar is switched off.
It has mucked up my scheduling a bit for the next month. I only became suspicious when I noticed the Scottish Bank Holiday Monday at the beginning of August was showing on FRIDAY, 30th of July!

Finder copies wrong data to DVD after 10.4.7 update.

Similar Messages

Maybe you are looking for