Finder crashes while accessing an iscsi target

Hi all.
Since a few months I can't use my synology nas to backup my system.
The diskstation is a synology 209 with two iscsi targets, one for my mac and one for my wifes win laptop. I'm using 10.6.4 and san iscsi initiator.
Under windows there is no problem to access the target and to backup data.
SuperDuper only writes some files, it stops and the system hangs.
Only a few times it is possible to stop and restart the finder, often it quits with: the finder can't be opened -10810.
Already done: new installation of iscsi initiator, repair permissions and some other hints, even a complete new installation of mac os x.
I hope someone has a workaround.
Thx for reply.
Jan
Message was edited by: MacManaman

Hello sponger:
If no one posts a fix for you, I would consider an archive and install (NOT an erase and install):
http://docs.info.apple.com/article.html?artnum=107120
Be sure you have a good backup/retreat strategy before you proceed. In my case, I make bootable clones of my iMacs on an external firewire drive using a little program called SuperDuper (www.shirt-pocket.com).
Barry

Similar Messages

Finder crashes when accessing my external hard drive

I have a Seagate FreeAgent GoFlex 1TB external hard drive where I keep a lot of my extra data. Very recently, I can't pin-point exactly when, the hard drive has been causing Finder to crash, most of the time irreparably -- and by irreparably I mean it will crash and I'll try to relaunch it but it won't work, in fact it won't actually relaunch unless I then click the Finder icon (which had no dot under it), after which it will immediately launch into an "Application Not Responding" state.
The reason I believe it is the external hard drive is because I have two computers, both of which have the same problems when doing stuff with the hard drive, and neither have problems when the hard drive isn't plugged in.
Some weird things: I have been accessing an excel document on the drive and have been saving the document this entire time -- before I began to think that it was the hard drive causing these problems. It seems as though I could open that document and save it without any apparent problems. Same sort of thing when I used Ableton Live recently. I could access my sample library on the external drive through Live's browser and it would seem to work just fine. However, with Live, when I tried to save a project it would immediately crash Live (presumably because Live is trying to save via Finder or something?). I can't remember if Finder would subsequently crash or not, but I remember having terrible issues with Finder crashing around the times I would be using Live and trying to save.
I tried doing a Repair Disk on the external through Disk Utility, but after it was showing only the stripey progress bar down at the bottom and only saying "Verifying and Reparing Disk," for a little while I stopped it and tried to quit Disk Utility, only to have Disk Utility crash and now Finder crash as well.
Another couple of things to note. Finder is not able to copy something to or from the external, or move something from the external to the trash. It will be stuck at 0 percent progress and if I press the x it will say "Stopping" and never go away. However when I do that and then just unplug my external I immediatley get a "Disk removed improperly" dialog and Finder will work again right away.

Interesting. What avout your login items in your Accounts preferences?
To save everybody downloading that stuff:
~/Library/LaunchAgents
com.adobe.AAM.Updater-1.0.plist
com.adobe.ARM.df0ab5bbe6f698196fcc21e3c1e66dcb758bd911f4d637272d9d8109.plist
com.apple.AddressBook.ScheduledSync.PHXCardDAVSource.F8FFDCC1-8936-45DE-BF21-BF3 C08DF0EF9.plist
[email protected]
com.divx.agent.postinstall.plist
com.valvesoftware.steamclean.plist
/Library/LaunchAgents
com.adobe.AAM.Updater-1.0.plist
com.google.keystone.agent.plist
com.m-audio.fasttrackpro.helper.plist
com.seagate.SeagateStorageGauge.plist
/Library/LaunchDaemons
com.adobe.SwitchBoard.plist
com.google.keystone.daemon.plist
waves.SoundGrid.RawEthernetHelperTool.plist
com.apple.remotepairtool.plist
com.microsoft.office.licensing.helper.plist
/Library/StartupItems
ProTec6
kexts
com.Cycling74.driver.Soundflower(1.5.2)
com.maudio.usb.fasttrackpro.driver(1.8.1)
Is the goflex a usb-attached enclosure?
Remove maudio, specifically that com.maudio.usb.fasttrackpro.driver. If you just move that out of /System/Library/Extensions (or if there is an installer) you need to reboot after adding/deleting kext's.
If no software was installed by you then somehow that external got that com.seagate.SeagateStorageGauge.plist installed in your /Library/LaunchAgents. If the maudio removal doesn't change anything then this segat launchagent is the next to go.

Finder crashes when accessing hard drive

Everything was working fine until I installed Font Doctor and started using it to examine my fonts. It would crashed when I hit this one folder. I tried it again and identified the exact font folder that was causing the problem (or so I thought). I restarted the computer and decided to get rid of that font folder, but all my fonts are on my main hard drive, and everytime I click on the hard drive the finder crashes and comes up with a default window, so I can't access it. I can access files/programs through applications or user, and I can access specific files on the main hard drive through the programs but can't get into the hard drive directory.
I did a search on this site and found this link:
http://discussions.apple.com/thread.jspa?threadID=964617&tstart=90
I thought it was the answer, especially since I had an old version of Stuffit on my system so I deleted Stuffit using the link enclosed. But when I did a search afterwards (after emptying the trash and restarting) it still showed stuffit things on my hard drive, not in the user or library folders which I can access, but on my main hard drive which I can't access.
I looked at the code and it showed some of the same things that the previous poster mentioned.
Here is some of the latest code after I restarted yet again:
Mac OS X Version 10.4.10 (Build 8R2232)
2007-07-24 18:31:50 -0700
dyld: Library not loaded: @executable_path/../Frameworks/StuffIt.framework/Versions/A/StuffIt
Referenced from: /Library/PreferencePanes/StuffIt AVR.prefPane/Contents/Resources/StuffItAVRDaemon.app/Contents/MacOS/StuffItAVRD aemon
Reason: image not found
2007-07-24 18:31:52.143 UniversalAccess[216] * -[NSBundle load]: Error loading code /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler for bundle /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle, error code 2 (link edit error code 0, error number 0 ())
2007-07-24 18:31:52.492 SystemUIServer[203] lang is:en
2007-07-24 18:31:55.902 iCalAlarmScheduler[219] * -[NSBundle load]: Error loading code /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler for bundle /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle, error code 2 (link edit error code 0, error number 0 ())
terminate called after throwing an instance of 'IAException'
terminate called after throwing an instance of 'IAException'
terminate called after throwing an instance of 'IAException'
2007-07-24 18:33:29.150 Safari[226] * -[NSBundle load]: Error loading code /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler for bundle /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle, error code 2 (link edit error code 0, error number 0 ())
2007-07-24 18:34:32.556 Mail[228] * -[NSBundle load]: Error loading code /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler for bundle /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle, error code 2 (link edit error code 0, error number 0 ())
2007-07-24 19:05:57.994 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:57.998 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:57.999 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.000 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.001 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.001 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.002 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.003 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.004 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.005 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.006 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.006 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.007 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.008 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.009 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.010 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.011 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.011 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.012 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.013 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.014 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.015 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.015 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.016 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.017 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:05:58.018 SyndicationAgent[276] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 24 Jul 2007 17:35:46 -800'
2007-07-24 19:07:55.169 Console[281] * -[NSBundle load]: Error loading code /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle/Contents/MacOS/ MagicMenuEnabler for bundle /Library/InputManagers/MagicMenuEnabler/MagicMenuEnabler.bundle, error code 2 (link edit error code 0, error number 0 ())
Any ideas?
Thanks so much!

Hi Barry,
Thanks for the suggestion. Unfortunately I did buy diskwarrior on my way home, ran it a few times. No success. It did identify problems it couldn't fix with a lot of the files that were in my suspect folder (a font folder) but since I can't access the files directly on my hard drive I can't get rid of them.
I did follow your suggestion, but all that it did that I can see was scatter my folders on the desktop.
Yet, while typing this, I just found a creative way to solve the problem!!! I was able to access the font folder in Bridge even though I couldn't access it otherwise. I deleted it in bridge and now things are working as normal!!! Thank God for Bridge. Amazing. Especially since that font folder has been on this machine for months, and the previous machine for years without ever causing a problem...

Finder crashes when accessing network drive

We have four macs on our network. When trying to access a volume on our network drive Finder crashes. The drive is accessible via FTP as well as From Windows Machines. Its only on Finder that we are having the problem. Everything use to work.
Im on an iMac, my Finder totally spazes out. Blinking off an on. On another system it just crashes. On the other two systems it just won't access the drive & Finder closes.Just started today.
If anyone know what this is please help!

Hi Barry,
Thanks for the suggestion. Unfortunately I did buy diskwarrior on my way home, ran it a few times. No success. It did identify problems it couldn't fix with a lot of the files that were in my suspect folder (a font folder) but since I can't access the files directly on my hard drive I can't get rid of them.
I did follow your suggestion, but all that it did that I can see was scatter my folders on the desktop.
Yet, while typing this, I just found a creative way to solve the problem!!! I was able to access the font folder in Bridge even though I couldn't access it otherwise. I deleted it in bridge and now things are working as normal!!! Thank God for Bridge. Amazing. Especially since that font folder has been on this machine for months, and the previous machine for years without ever causing a problem...

ITunes crashes while accessing iTunes Store with a intel video driver

I have a DELL laptop running Windows 8.1 with i7 4500U at 1.8G, 8G ram, 1TB hard disk, NVidia GT750M, iTunes is working fine at downloading or updating apps but crashes while I trying to accessing iTunes Store, no matter I choose run with intel integrated video card or Nvidia video card.
I wonder if this is happened because of Win 8.1 incompatibility or intel video driver, the driver is up to date and if I try an older driver, iTunes won't start at all.
The same thing happens with Adobe Photoshop CC 64bit, it just get freezed but get an error message said intel driver is crashed and auto recovered.
a message is shown if I run iTunes with intel video card by default when i access itunes store, but itunes quit if I try nvidia video card, without any error message.

I'd like to add some more details to my question.
I don't know if this happens at Win8 since I updated to Win 8.1 right after I purchased my laptop, all Win patches are up to date and also iTunes, I am running Win 8.1 64bit Pro version.
I tryed to reinstall iTunes, install quicktime or reinstall quicktime, also tryed to use microsoft kb 2639417, but it does not support win 8.1.

Finder crashes while naming files

For the past several months (and only since downloading Mavericks) Finder crashes about 50% of the time I try to name a file on the Desktop. I click the file, hit 'enter', and either right away or while trying to type the first letter, the rainbow spinning wheel comes up and I have to Relaunch Finder. It's very annoying. Anyone else had this problem, and any solution known?
My computer specifications:
MacBook Pro, 13-inch, Late 2011
Processor: 2.4 GHz Intel Core i5
Graphics: Intel HD Graphics 3000 384 MB
Software: OS X 10.9.3 (13D65)
Memory: 4 GB
Storage: 415.18 GB free out of 499.25 GB; 500 GB SATA Disk
Relaunching Finder will usually cancel any changes made to the document name before it crashed, and will allow me to then name the file, but usually the next file I try to rename crashes and the process repeats.

Launch the Console application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process. For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Finder Crash when accessing SMB share

iMac 2.16 GHz Intel Core Duo.
When opening a particular share on an SMB server, the Finder crashes and relaunches. Does not happen on other shares on the same server. Happens for all users on this Mac. Does not happen on other Macs.
Have tried deleting finder.plist and windowserver.plist, and cleaning caches with Onyx and Cocktail.
Note: also crashes on some DMGs.
Mac OS X (10.4.8)

I have also tried Techtool and Repair Permissions.

External drive buggered after computer crashed while accessing

I was using my external hard drive to back up on, as usual. However, my G5 crashed while writing to the drive. And it hasn't worked ever since.
I have tried using the disk repair utility to re-partition the drive. But the progress bar goes to 2% and stays there, ie it starts trying to partition the drive and then literally sticks there.
The same thing happens on windows by the way. However, there is a utility from Maxtor which tests the drive and says it's physically fine.
Hmmm... is there anything else I can try to get the drive formatted?
Cheers
Alan

You may want to try Disk Warrior to repair the directory of the drive.

BPEL server and java crashes while accessing a deployed process in console

Hi,
I am running BPEL developer version on my local machine (win xp ). If I try to run a deployed process from my BPEL console by clicking on the process name, an Unexpected error dialog box pops up saying Java has encountered an unexpected error. After that the broser as well as the BPEL server window crashes. I have tried both IE and netscape.
Can someone help as this is completely preventing me to test my deployed processes.
Thanks

Naah, I said, that will never work. But to my shock and (pleasant) surprise, it does! Here is a snippet of a little routine I cobbled together using LabVIEW for both the Writer and the Reader.
The Writer is on top. It creates a Temp.txt file on my Temp directory, deletes it if it is already there, then opens it for writing. There's a boolean "Done" flag that tells me when the Writer finishes, so I clear it before entering the Writing Loop. Here, every half-second, I write the sequential numbers 0 .. 9, with a New Line to create a Text File of Lines. When I'm finished, I close the file.
Below this is the Reader Loop, designed to start after the Writer Loop has opened (and created) the file. Here we open the same file in Read-Only mode. The Reader Loop also goes 10 times (I could have built in a Stop condition, but this is only a Proof-of-Concept). The loop is initialized with the current File Position (0) in a Shift Register. The inner While Loop is a "Wait for Data to Appear", a loop which checks 10 times a second to see if the File Position has changed, exiting when it does (meaning the Writer has Written Something). It then reads a line from the File (the Read Text function has its "Read Lines" property set) and displays it.
When you run this, you will see the Reader's output, Line, count up, 0 .. 9, and then the program stops with no errors. What fun!
Bob Schor

Finder crashes while generating PDFs in preview

Hi guys,
i've got a little problem.
Everytime i browse with the finder to PDFs it chrashes, while generating PDFs in preview.
Also it takes ages to generate the preview for a PDFs with about 1MB.
any hints and tipps about that problem ?
thanks in advance.
cheers

Hello sponger:
If no one posts a fix for you, I would consider an archive and install (NOT an erase and install):
http://docs.info.apple.com/article.html?artnum=107120
Be sure you have a good backup/retreat strategy before you proceed. In my case, I make bootable clones of my iMacs on an external firewire drive using a little program called SuperDuper (www.shirt-pocket.com).
Barry

Weblogic Admin Server Crash while accessing sbconsole dashboard

I'm having this issue where the Admin Server crash when I try to access sbconsole Dashboard page.
There is no exception or strack trace before it crash, it just crash and admin server got restarted.
I've noticed error stack trace for the below when admin server is running. Not sure if this is related. Any advice appreciated. Thanks.
####<Feb 27, 2013 6:31:31 PM CST> <Warning> <RMI> <aussoadrapp01.us.dell.com> <svc2_osb_dr_admin> <[ACTIVE] ExecuteThread: '1' for q
ueue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <f64e2b8deea602d6:-59f22bd:13d1e08e8c0:-7fc2-0000000000001ba8> <136
2011491185> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.m
anagement.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id.
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrow(DefaultMBeanServerInterceptor.java:856)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrowMaybeMBeanException(DefaultMBeanServerInterceptor.java:869)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:670)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.IllegalArgumentException: null id
at com.bea.wli.sb.util.RouterElement.<init>(RouterElement.java:214)
at com.bea.wli.sb.util.RouterElementFactory.traverseAction(RouterElementFactory.java:168)
at com.bea.wli.sb.util.RouterElementFactory.traverseActionSequence(RouterElementFactory.java:88)
at com.bea.wli.sb.util.RouterElementFactory.traverseStage(RouterElementFactory.java:152)
at com.bea.wli.sb.util.RouterElementFactory.traversePipeline(RouterElementFactory.java:142)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineNode(RouterElementFactory.java:129)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineFlowType(RouterElementFactory.java:66)
at com.bea.wli.sb.util.RouterElementFactory.toRouterElement(RouterElementFactory.java:49)
at com.oracle.osb.emsupport.impl.ServiceHelper.getPipeline(ServiceHelper.java:228)
at com.oracle.osb.emsupport.impl.ServiceHelper.getProxyServiceConfiguration(ServiceHelper.java:109)
at com.oracle.osb.emsupport.impl.ServiceHelper.getConfiguration(ServiceHelper.java:73)
at com.oracle.osb.emsupport.api.ResourceConfiguration.getConfiguration(ResourceConfiguration.java:83)
at sun.reflect.GeneratedMethodAccessor839.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:93)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:27)
at com.sun.jmx.mbeanserver.MBeanSupport.getAttribute(MBeanSupport.java:216)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:666)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

I'm having this issue where the Admin Server crash when I try to access sbconsole Dashboard page.
There is no exception or strack trace before it crash, it just crash and admin server got restarted.
I've noticed error stack trace for the below when admin server is running. Not sure if this is related. Any advice appreciated. Thanks.
####<Feb 27, 2013 6:31:31 PM CST> <Warning> <RMI> <aussoadrapp01.us.dell.com> <svc2_osb_dr_admin> <[ACTIVE] ExecuteThread: '1' for q
ueue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <f64e2b8deea602d6:-59f22bd:13d1e08e8c0:-7fc2-0000000000001ba8> <136
2011491185> <BEA-080003> <RuntimeException thrown by rmi server: javax.management.remote.rmi.RMIConnectionImpl.getAttribute(Ljavax.m
anagement.ObjectName;Ljava.lang.String;Ljavax.security.auth.Subject;)
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id.
javax.management.RuntimeMBeanException: java.lang.IllegalArgumentException: null id
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrow(DefaultMBeanServerInterceptor.java:856)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.rethrowMaybeMBeanException(DefaultMBeanServerInterceptor.java:869)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:670)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$12.run(WLSMBeanServerInterceptorBase.java:326)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.getAttribute(WLSMBeanServerInterceptorBase.java:324)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: java.lang.IllegalArgumentException: null id
at com.bea.wli.sb.util.RouterElement.<init>(RouterElement.java:214)
at com.bea.wli.sb.util.RouterElementFactory.traverseAction(RouterElementFactory.java:168)
at com.bea.wli.sb.util.RouterElementFactory.traverseActionSequence(RouterElementFactory.java:88)
at com.bea.wli.sb.util.RouterElementFactory.traverseStage(RouterElementFactory.java:152)
at com.bea.wli.sb.util.RouterElementFactory.traversePipeline(RouterElementFactory.java:142)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineNode(RouterElementFactory.java:129)
at com.bea.wli.sb.util.RouterElementFactory.traversePipelineFlowType(RouterElementFactory.java:66)
at com.bea.wli.sb.util.RouterElementFactory.toRouterElement(RouterElementFactory.java:49)
at com.oracle.osb.emsupport.impl.ServiceHelper.getPipeline(ServiceHelper.java:228)
at com.oracle.osb.emsupport.impl.ServiceHelper.getProxyServiceConfiguration(ServiceHelper.java:109)
at com.oracle.osb.emsupport.impl.ServiceHelper.getConfiguration(ServiceHelper.java:73)
at com.oracle.osb.emsupport.api.ResourceConfiguration.getConfiguration(ResourceConfiguration.java:83)
at sun.reflect.GeneratedMethodAccessor839.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:93)
at com.sun.jmx.mbeanserver.StandardMBeanIntrospector.invokeM2(StandardMBeanIntrospector.java:27)
at com.sun.jmx.mbeanserver.MBeanSupport.getAttribute(MBeanSupport.java:216)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getAttribute(DefaultMBeanServerInterceptor.java:666)
at com.sun.jmx.mbeanserver.JmxMBeanServer.getAttribute(JmxMBeanServer.java:638)
at weblogic.management.mbeanservers.internal.JMXContextInterceptor.getAttribute(JMXContextInterceptor.java:163)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.getAttribute(SecurityInterceptor.java:299)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.getAttribute(WLSMBeanServer.java:279)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$5.run(JMXConnectorSubjectForwarder.java:324)
at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.getAttribute(JMXConnectorSubjectForwarder.java:319)
at javax.management.remote.rmi.RMIConnectionImpl.getAttribute(RMIConnectionImpl.java:600)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:590)
at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

64bit iTunes for Windows 7 constantly crashing while accessing the store

Is anyone else having problem with iTunes recently, 12.1 is constantly crashing whenever I try to visit the iTunes store , even blowing away my iTunes directory and re-installing and starting afresh iTunes crashes almost immediately. iTunes is unusable like this.
What can I do to help diagnosis these problems? minidump? log file?

So I believe the issue I see is related to the much reported JavaScriptCore.dll issues (the below is from my event viewer),,crashes with this signature are heavily reported, what I've also noted that if I am using my laptop at home rather than work iTunes doesn't crash. (I've tried all other items, reinstalling, making new iTunes folder, removing all Internet temp objects)
So clearly this is network related, obviously related to the network configuration.
However this is still the fault of "iTunes" a crash with an exception code of 0xc0000005 is an access violation, which means its most likely a NULL pointer deference or accessing corrupt memory.Surely Apple have seen this enough to warrant a fix.
I am also really surprised that Apple is not making an attempt to fix this, crashes like this which are highly reproducible are often the source for exploits
Here is hoping a future fix, for alas iTunes is currently usable.
Faulting application name: iTunes.exe, version: 12.1.0.71, time stamp: 0x54c76235
Faulting module name: JavaScriptCore.dll, version: 7600.1017.6000.1, time stamp: 0x54b5da5f
Exception code: 0xc0000005
Fault offset: 0x000000000035dee2
Faulting process id: 0x36b8
Faulting application start time: 0x01d04b7be80dad27
Faulting application path: C:\Program Files\iTunes\iTunes.exe
Faulting module path: C:\Program Files\Common Files\Apple\Apple Application Support\JavaScriptCore.dll
Report Id: db686049-b76f-11e4-a779-d067e5315560

Finder crashes while copying many files.

Upgraded to 10.7 (Lion) and trying to copy about 300 GB of files from 1 external drive to another external drive and Finder continues to crash.
I've tried copying smaller chunks and it works fine up to about 9 GB, when it seems to crash.. forcing me to restart the copy process.
Is there a limit to the amount of data that I can copy in a single batch?

I rountinely backup large chunks of data from my Mac Pro to two external OWC VoyagerQ Firewire hard drives (800). When I say large I mean anywhere from 50GBs to 500GBs at a time. Under 10.2-10.6 I could start one copy and then the second, simple Finder copies mind you, and after the interminable file counting BOTH copies would proceed SIMULTANEOUSLY. Made it as simple as pie to walk away and come back knowing my data was now in three places.
Under LION the same process has become hopeless. Following the same procedures above now results in the FIRST copy having to complete BEFORE the SECOND copy can commence. Are you kidding me? A doubling of the time I have to spend backing things up? Before Apple faults my setup or something, I have five VoyagerQs and three FireWire 800 ports, and have tried the two backup drives chained, on separate FW channels, even with one inernal and one external and the same thing happens. I suspect that this is related to Thunder^^^^ and is something APPLE has got to fix fast or a lot of folks are going back to 10.6. Be interesting to see how the Mothership responds. Kill the messenger is most likely.

Finder Crashes while trying to Open my External Hard drive

Every time I open finder to view files on my External Harddrive Finder closes. Disc Repair does nothing, it says there is nothing to repair. I know all my files are still there because they show up on another computer. Please help!

Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

Finder Crashing When Accessing Documents Folder

When trying to open my Documents folder, I click on Hard Drive, Users and then my Account folder. Finder then instantly restarts. I have run Disk Utility and verified/ repaired disk permissions. Also have Verified disk but have been unable to run the repair disk as needed. Somehow I have also misplaced my restore CD so I need options to fix this.

Tough without a Tiger Disk, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(space between fsck and -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: ** The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214

Finder crashes while accessing an iscsi target

Similar Messages

Maybe you are looking for