Finder doesn't work properly after waking up from sleep?

I have a brand new MacBook Pro with Lion installed on it. It travels back and forth from home to work with me, and at work I plug it in to an Apple Display. When I leave work, I put the laptop to sleep and take it home. At home, when it wakes up from sleep, the finder does not work properly. Often, I cannot see any finder windows, and mission control does not show my various desktops, and only shows open applications. I have already tried throwing away the com.apple.finder.plist file, and it did not help.
Any suggestions are appreciated.

Yes, change your display / colour profile to a different (or the default) profile. Has worked for myself, and many others on other forums.
Hope that helps...
D.

Similar Messages

The App Switcher of Mac OS X Lion doesn't display properly after waking up from sleep

Hey guys,
I have a MacBook Pro15 inch Core2Duo 2.66GHz running Mac OS X 10.7.2.
When my Mac woke up from sleep, sometime the Application Switcher doesn't show the iconc properly like this.
Other time, it shows the dark icon.
The color profile setting seems to be messed up. But it only affects certain apps.
Some of my affected apps are
Application Switcher
like attached image
Icons got darker
TweetDeckThe app becomes darker overall
Gaicho Software's XRGThe supposed-to-be orange indicater became red
Is there any solution to this?
Thanks in advanced!

Yes, change your display / colour profile to a different (or the default) profile. Has worked for myself, and many others on other forums.
Hope that helps...
D.

My palm m105's touch screen doesn't work properly after a sync.

I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
My palm m105's touch screen doesn't work properly after a sync.
I dug out my old m105, put new batteries in and start it. On first launch it auto runs the alignment tool, and after touching all the points it goes to the main screen and works fine. No problem till here.
Now, I plug it into my old computer which still has the palm software with my apps, and I run the sync operation (from the palm device sync manager, cause I lost my cradle and I'm connected via the serial cable), and it syncs fine BUT, here comes the problem, when it finishes the sync (successfully) the touch screen is all misaligned. I can't go back to the home screen or do anything useful.
Thanks in advance!
Post relates to: Palm m105
Post relates to: Palm m105

Maldoman578,
Let's help solve this mystery together! Is your screen freezing after every reboot? Is there any physical/liquid damage on the device? When did this issue begin? Did you notice this after a recent update or application download?
EfrainM_VZW
Follow us on Twitter @VZWSupport

Touchscreen stops working after waking up from sleep

Touchscreen stops working after waking up from sleep sometime it not working at all.
IT encore2 WT8-B32CNM

If you can't solve your issue and no one in the community can help, contact support to speak with a tech support agent at (800) 457-7777.
- Peter

Hello, I have a macbook pro late 2011 15 inch with 4 gb ram. My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Is there a fix?

My macbook runs extremely slow when logging in after waking up from sleep, locking up and I am unable to use the keyboard. Furthermore, when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank and I sit here frustrated. Anytime i wake up my computer, my keys don't respond and I've waited at most 3 minutes untill i can type in my password. Even sometimes when i type in my password and hit enter, it takes forever to open up my mac. I have barely used any storage in my macbook, since i only use it for college, and I have run clamscan wiht no viruses showing... Any ideas?

when just using safari to watch streaming television, my computer gets really slow, and locks up, and the dock appears blank
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Ethernet interface disappears after waking up from sleep

Hi guys,
I've been trying to debug a networking problem without any luck and I think it's about time I ask the forum for help.
My ethernet interface no longer works after I wake up my computer from sleep. I have no idea why.
Before sleep:
# ls /sys/class/net
lo wlp2s0 enp3s0f2
After waking up from sleep,
ls /sys/class/net
lo wlp2s0
Here are the list of services I have running.
UNIT LOAD ACTIVE SUB DESCRIPTION
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded failed failed dhcpcd on enp3s0f2
[email protected] loaded active running Getty on tty1
[email protected] loaded active running Daemon which acts upon network cable inse
kmod-static-nodes.service loaded active exited Create list of required static device nod
[email protected]\x2dSecure.service loaded active exited Networking for netctl profile wlp2s0-Wolf
polkit.service loaded active running Authorization Manager
systemd-backlight@acpi_video0.service loaded active exited Load/Save Screen Backlight Brightness of
systemd-fsck@...\x2d38bc68d942fc.service loaded active exited File System Check on /dev/disk/by-uuid/1c
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create static device nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Recreate Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Reboot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
upower.service loaded active running Daemon for power management
[email protected] loaded active running User Manager for 1000
Furthermore, plugging in the ethernet cord after the computer has started doesn't connect to the internet, even when I have the ifplugd service running. I am forced to run:
sudo ip link set enp3s0f2 up
sudo dhcpcd enp3s0f2
However, I can't run these commands after the laptop wakes up from sleep since it no longer sees the ethernet interface.
I am thoroughly confused. Please help me.

It seems to be fixed after the kernel update. On an related note, I've switched from using dhcpcd to netctl. I've enabled netctl to automatically connect to the network using:
# systemctl enable [email protected]
# systemctl enable [email protected]
So when I check for the status of the ethernet profile, I get told that's it's inactive.
#netctl status ethernet-dhcp
netctl@ethernet\x2ddhcp.service - Networking for netctl profile ethernet-dhcp
Loaded: loaded (/usr/lib/systemd/system/[email protected]; static)
Active: inactive (dead)
Docs: man:netctl.profile(5)
But I turned off the wireless, so I must be connected to the ethernet, So how do I know which profile I'm connected to?

Why does my Mac screen suddenly go dark? Sometimes it stays dark for an indefinite period after waking up from sleep.

Why does my Mac screen suddenly go dark? Sometimes it stays dark for an indefinite period after waking up from sleep. I have to open and shut the monitor screen to get it to light up again.

Might try posting in the MacBook Pro laptop forum. This is the Mac Pro desktop forum.
Also see:
OS X: When your Mac doesn't sleep or wake

W510 eSATA/USB2.0 combo port does not respond after waking up from sleep mode

Has anyone tried to connect external DVD/CD player or burner to the eSATA/USB combo port and experienced very slow system performance after waking up from sleep mode? It might takes minutes to launch an application program that usually takes just few seconds. My W510 can not even restart. It will just stop at the Thinkpad logo if I tried to restart after waking up from sleep.
The funny thing is if I moved the external DVD/CD player to the USB2.0 port in the back, everything went back to normal. I don't know if this has anything to do with the fact that the combo port has something to do with eSATA.
Thanks

It seems that this problem is unique to my system. I am hoping that one of the Mac Guru's will have at least a pointer in the right direction.
Thanks.

Lose connection to external USB hard drive after waking up from sleep

My Mac lost connection to the external USB hard drive after waking up from sleep. I can still see the folders in the hard drive in Finders, but when I double clip a folder no file within the folder is displayed. I have to reconnect the hard drive with iMac to read its contents.
May I ask how this happens and is there a solution?
I'm using Paragon NTFS for Mac OS X to read from and write to NTFS format of USB external hard drive.
Thanks!

... I un-ticked the "put hard disks to sleep when possible" option in the Energy Saver panel in the System Preferences, and it seems the problem is solved. will have to sleep and wake up my iMac to further verify if this is the solution ...
Alternative advices are always greatly appreciated!

Stream video doesn't work properly after update to OS Mavericks

after update to OS Mavericks stream video doesn,t work properly!!! doesn't loaded stream video and stream audio from web sites (youtube, or other with stream video).

1. System Preferences > Other/ Flash Player > Advanced > Delete All
     Press the "Delete All" button
     Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    http://get.adobe.com/flashplayer/?PID=7105813
    Follow the prompts.
    Quit Safari.
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Internet Plug-ins > "Allow plug-ins"
    Enable it.
    Press " Manage Website Settings" button for more options.

My Safari doesn't work properly after installing Lion. Don't like it, how can I uninstall? (Cloud not worth it)?

I upgraded ti Lion 10.7.2 for icloud but it's causing other problems with my mac. My Safari doesn't work properly anymore. Wishing I didn't upgrade, anyone know how to fix this or do i just have to uninstall? Thanks,

Wipe the drive clean and install Snow Leopard from your install disk.
Might be less work fixing Safari. Try Resetting Safari.

Trackpad do not work properly after migration data from old imac to new macbook pro

After migration all my Data from my old imac to my new macbook pro (both running on OS Maverick) with migration assistant, the trackpad of the new macbook pro doesn´t work properly any more.
But the trackpad had worked properly before the data migration!
But now the trackpad feature of scrolling up and down with two fingers doesn´t work. (Other features are ok.)
I have tried to change the trackpad settings, but still doesn´t work.
Can anyone help me???

You are still under warranty. Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty.
#1 - You have 14 days from the date of purchase to return your computer with no questions asked.
#2 - You have 90 days of FREE phone tech support.
#3 - You have the standard one year Apple warranty.
#4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years. You can obtain AppleCare anytime up to the first year of the purchase of your computer.
Take FULL advantage of your warranty. Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

Track pad freeezzzz after waking up from sleep mode

HI
i have OS X Ver 10.5.1
i have enough ram, disk space, and have the 2.4 GHz Core 2 Duo processor.
but when my mac wakes up from sleep the track pad is just not behaving properly, i.e it keeps jumping positions and freezes until i restart. if this continues it will be very frustration to use leopard.
also i did not get the option to archive and install at the installation so i cant even down grade, this is one of those time i trusted that everything will go right and looks like the problems just begun.
please help me !
Vinod

Hi,
I have almost the same problem with my T540p, except that there is no internet connection not only after waking up from the sleep mode, but also when starting windows and sometimes the internet connection will get suddenly lost during normal windows run.
I tried installing all kinds of drivers - latest from intel, latest from lenovo update (which is always different version from the one from intel), some older versions. Nothing helps.
Re-enabling the WiFi device like Aaziz1982 suggested, doesn't help.
Here is a more detailed description of my problem: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T540p-WiFi-Connected-no-internet/m-p/177818...
Does anyone have other suggestions?
Thank you,
Pavel

Compaq C700 - CPU fan not running after waking up from Sleep mode

Hi guys,
Waking up from Sleep mode does not start the CPU fan.
Kernel: 2.6.32-ARCH
KDE : 4.4
Let me know what other details you need.

I was having the same problem after installing mountain lion.
What i did was in Finder went to /Library/Preferences/SystemConfiguration/ and deleted all the networking plists (refer screen shot). Then restarted the Mac and in Network Preferences reconnected to my WLAN.
That solved the problem.

Gif doesn't work properly after saving to web?

I've taken a gif from the internet, cropped it, and plan to use it somewhere. The Gif works perfectly when I view it in Photoshop, but once I save it for web and view it through a browser, it doesn't work. How would I fix this? (I apologize for being rather vague)
Here is the original gif, and what I'd like the finished product to look like :
And here is what I'm getting after messing around with it :

Hi,
With iChat Quit.
GO to the Applications/Utilities folder and launch Activity Monitor.
In Here find IMAgent in the list.
Use the Quit Button top left (And confirm Force Quit.)
Launch iChat.
8:54 PM Thursday; October 27, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Finder doesn't work properly after waking up from sleep?

Similar Messages

Maybe you are looking for