Finder Errors After Flash/Hard Drive

Hi there, I have a MacBook Pro Retina 13" Late 2013 model and after upgrading it to Yosemite I have errors once connecting it to a hard drive or flash drive. After some research I found that it might be a problem with the NTFS format. I use both Mac and PC's so that's why I used that. Although, when I connect a flash drive it'll not show the folders visually in the finder. The files are still there and I can select them just by estimating where they are. After removing the hard drive, if I go into my own files onto my Mac such as Documents, if the folders and files do show up it'll have a black bar around the name and won't go back to normal unless I kill and restart Finder. Any help? Thanks for anything.
Sincerely,
Thomas Brooks
If you can see the folder Lab2 is located in this folder on my hard drive

Can anyone help? My finder does the black bar thing occasionally and I can't access any of my hard drives.

Similar Messages

  • Create a restore point fails with 0x81000101 error after replacing hard drives

    I recent had a hard drive failure so, figuring that I may as well gain something for all of the work, I replaced both drives in my RAID 1 array (thereby doubling the drive space).  I then restored from back up and all has appeared well for several months
    now.  Last week I started having trouble with RDC which led me to potential issues with my Intel RAID driver which finally led me to System Restore points.  It turns out that they haven't been working for some time now and I've been unable to get
    them started using any of the advice in the other discussions on this particular topic.
    All of the necessary services should be running.  I've also tried turning system protection off/on.
    The new information that I provide is that when I first opened the System Protection tab, I found two entries for the C: drive.  The first had protection turned off.  The second, named OS, was listed as missing.  After a couple of attempts
    with the configuration, I ended up with one entry for OS (C:) with protection On.  It still didn't work which led me to the forum and many failed attempts at getting this one feature working.
    One of the other discussions mentioned the RestoreSystem log files.  They are, of course, binary files but I was able to see that I'm getting something called SxRegReadDWORD4FAILED6 fairly soon followed later by a FAILED CSpp::_CreateSnapshotSet.
    I'm hoping that somebody with the right tool and knowledge to actually read those files can help me get restore points working again.

    Hi,
    What is the full error messages? Like this?
    The shared restore point operation failed with error (0x81000101) The creation of a shadow copy has timed out. Try this operation again.
    If yes, then we might take a try with the method mentioned in the below blog:
    Windows Server Backup failed to backup with error 0x81000101
    Let us know the process.
    Best regards
    Michael Shao
    TechNet Community Support

  • How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?

    I have a seagte back up plus. I pulled my hard drive out without ejecting it and now finder dosn't find it but I see it in disk utility (although I cant repair permissions) How do I get finder to recognize my hard drive after pulling my hard drive out without eject...? Is my hard drive dead? I see it in disk utility... Can I get my info back?
    Thank you so much for any help

    In Disk Utility you need to see a volume or partition in addition to the drive.
    If all you see is the drive, then when you ejected it you proably corrupted the volume or partition on the drive.
    If that is true then your chances of getting anything back are slim at best.
    About the only thing I know that might work not is to send the disk out to a service for recovery. This is going to cost like $$$$.
    Is the data worth that much?
    Allan

  • Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    Please could somebody help me I have an iMac which came with Tiger 10.4.10 installed I have lost my disks and I need to re-install after a hard drive failure. Where can I find this? I will upgrade to Snow Leopard after but I cannot go straight to SL

    You can go strait to SL, all you need is a retail SL DVD available from Apple for $20. The US online store has them at:
    http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard

  • I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say install to Applications but it's not there. How do I find it and can I put it in my dock?

    I am getting the PowerPC applications are no longer supported error, so I downloaded Libreoffice and can not find it on my hard drive anywhere. It did say it would install to Applications, but it's not there. How do I find it and can I put it in my dock?

    In Safari's preferences:
    Look in the folder displayed where you see the arrow. The actual Downloads folder is found in your Home (user) folder.

  • After trying to install Mavericks, got an error message my hard drive was bad.

    After trying to install Mavericks, got an error message my hard drive was bad.  Took it in to the Apple Store and the 'Genius' bar guy couldn't see it as an external drive when he connected another Macbook. If I get another hard drive what's involved in getting my system operational again?

    Hi there
    Looks like I may be experiencing a similar issue to yours as having issues installing Maverick on snow leopard?
    https://discussions.apple.com/thread/6286238
    Did you manage to get your problems resolved?

  • HT201272 I am trying to redownload purchased music after a hard drive dilemma.  When I click purchased I get an error message.  Any insight?

    I am trying to redownload purchased music after a hard drive dilemma.  When I click on the 'purchased' category in the iTunes store I get an error message.  Any insight?

    Does it include "unable to download "ITEM" at this time. Please try again"? I think there is an issue with redownloading your purchases using the "purchased list" option. I suggest you contact the support team for a history regrant (your purchases will be reposted to your account", which i think is a one time exception and would only include the items which are still available in the store.

  • "F11 System Recovery" during boot does not work after Cloning hard drive.

    Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
    HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
    Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
    Startup Menu (F11 System Menu works properly) only on original hard drive.
    Following obtained from Disk Management & diskpart in Command Prompt.
                                     GPT Disk <700GB>
    Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
    Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
    Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
    Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
    Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
    Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
    Partition 7 NTFS Primary 26MB/350MB [Recovery]
    Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
    I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
    Acronis True Image 2015
    Acronis Backup for PC
    AOMEI Backupper Professional
    Macrium Reflect
    Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
    “Recovery
    Your PC needs to be repaired
    A required device isn’t connected or can’t be accessed.
    Error code: 0xc0000225
    You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
    Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
    Thank you in advanced.

    Hi,
    How did you clone the HDD ? One-for-one or different method ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Why can't I use the 16GB DDR3 System Memory (2 Dimm) with 24GB flash Hard Drive Acceleration Cache?

    I tried to customize the Envy 15t but I can't proceed on upgrading the following.
    Error
    24GB SSD Acceleration Cache requires purchase only up to 8GB System Memory. 
    Why can't I use the 16GB DDR3 System Memory (2 Dimm) with 24GB flash Hard Drive Acceleration Cache?
    Can HP explain this to me? or any one? please

    Hi,
    The 24Gb cache drive will store manything and normally it will need at least twice the size (capacity) of RAM. Double 16Gb is 32Gb therefore 24Gb is not big enough.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

    How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

    You can download the trial installer directly. Find the appropriate link below.
    You must be on a trial download page to use the links, otherwise you get an error message.
    For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
    before pasting the link into the address bar.
    http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
    http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
    You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

  • HT201250 How to restore laptop from time capsule after replacing hard drive

    How do I reload all my programs and files from a time capsule after changing hard drive?  Also Apple store reloaded with Snow Leopard and not Lion.  Will that be a problem?  Thank you

    Plug the external drive into a computer by usb or whatever box you have available..
    When you say blank, is it correctly formatted.. we recommend HFS+ which is Mac OS Extended (jorrnaled)
    Make sure you use GUID type disk setup not MBR if it came from PC world.
    Copy the files via finder from TC to the external drive.

  • How can you tell that you have the 24GB flash Hard Drive Acceleration Cache

    I bought laptop with 24GB flash Hard Drive Acceleration Cache but i don't see a ssd drive when i go to my computer.
    This question was solved.
    View Solution.

    Yes it does not mount as a lettered drive. It is combined with the main drive in a RAID array. Look in the list of programs and find Intel Rapid Storage Technology and open it up. If you have the 24 gig cache drive it will look something like this:
    See the two drives listed in the upper right corner?
    If this is "the Answer" please click "Accept as Solution" to help others find it.

  • Delete windows warnings, error messages from hard drive

    delete windows warnings, error messages from hard drive

    Hello @NeoTaino,
    I have read your post on how your desktop computer is displaying a "delete Windows warning, error messages from hard drive". Did you install any hardware or software recently? What does the full error message state as it appears on the screen? I would be happy to help you, but first I would encourage you to post your product number for your computer. Below is a is an HP Support document that will demonstrate how to find your computer's product number. In addition, it will also help if you indicate which operating system you are using; and whether your operating system is 32 or 64 bit. The more information you can provide, the better!
    How Do I Find My Model Number or Product Number?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please re-post with the necessary information, this way I will be able to research this further for you. I look forward to your reply!
    Cheers!
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • HELP"apple application support not found when installing itunes after a hard drive crash and replace

    HELP"   error "apple application support not found" when downloading itunes after a hard drive crash and replacement????

    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • I am trying to download my CS4 product after a hard drive crash

    I have been searching the site for what seems like forever. I need to download my CS4 suite after a hard drive crash. All I can find are my serial numbers. Where should I be going to find my downloads. It seems like it should be under "orders" but its not. I need to get this program going as I' losing valuable time on my projects.
    The orders page shows nothing, even when I click on orders or history:
    The products page shows my purchases, but doesn't allow for a download:
    Thanks

    Direct Downloads
    And really, do back up your installers for situations like this. That stuff may not be around much longer one day...
    Mylenium

Maybe you are looking for