Finder folder with question mark, now will not start at all!!!
Hey guys, I was working in Avid and i opened up Quicktime, all of a sudden i got a crash log. So i restarted, upon restart i got the finder folder with the blinking question mark. I tried restarting with the OS9 cd by holding down the C button, no luck there. So i moved onto the next step, resetting the PRAM, no luck there (just sat on black for numerous minutes until i let up, then the folder came back). Then I moved onto resetting th PMU, now it will not start up at all. I restart, and all i see is a black screen, nothing. Any help appreciated. Thanks in advance.
The machine im workin on is a Powermac G4 (quicksilver), OS9, 1.5 G Ram, machine bases around Avid Editing system
Rhyno
Ok let me clarify this.
1)system crashed restarted and got the folder with the ?
2) tried to boot from the OS 9 CD no luck? it did not boot?
3)reset pram and still the flashing ?
4) Reset the PMU chip and the mac is dead won't start up at all?
a couple of ideas too...
did you press the pmu button more than once?
Check to make sure the power cord is plugged in correctly etc.
Check the Pram battery to see if it might be dead it should read between 3.3v and 3.7v
also try to restart the computer without other devices plugged into it (USB Firewire, keyboard, even monitor.
hmm...
iBook G4 Mac OS X (10.4.3)
Similar Messages
-
My computer has a blinking folder with question mark on it at start... What is going on?
My computer has a blinking folder with question mark on it at start... What is going on?
The hatter wrote:
also that the default is no longer set asin when someone had windows as default and removed it w/o changing Startup Disk panel.
Oh yes, I forgot that people still do that -
Following an automatic update, the machine wouldn't boot. Screen came on (shows white) - then either showed a 'No-Entry' Sign and a spinning cog, or a folder with a qusetion mark. I tried to start the machine in different modes ( eg. holding shift after the tone ) but nothing worked. after leaving the machine alone for 1 hour. It worked perfectly again. I did a 'verify disk' check which found no problems. 2 hours later it then froze ( In - Photoshop). Could not force quit, so shut down, and have not been able to boot again since (white lit screen - flashing folder with question mark) . I have also taken the hard drive out and checked the connections which seem fine. Any suggestions? - Is the Hard Drive dead. : other info : It was also running parallels 8, with Windows 7. at the time of the update....
This article may help: A flashing question mark appears when you start your Mac.
-
I appears on the screen when you turn a folder with question mark that can not do
Finder with question mark
Shut down your Mac by holding down the power button until the screen goes black.
Then startup while holding down the Option key.
if the disk is ok, at some point you should see the Startup Manager window where you can select the startup disk then restart.
A flashing question mark appears when you start your Mac -
Folder with question mark - Previous posts not resolving my issue
Good evening everyone
I have a Macbook Pro, which I bought in 2009.
I have never had any problems, and I have been regularly deleting rubbish to keep the memory ok (Pictures, downloads, old text docs etc)
I went online yesterday afternoon, to check out some information - It was fine. I closed the lid, and returned last night to use it.
When I opened it up, there was a white screen with a grey folder with a question mark flashing. As there was no cursor or response from the keyboard, I kept my finger on the power off button so it shut down.
I turned it back on to see the same screen.
I then went online via my iphone to search the meaning behind this error, and read several different troubleshooting feeds. I understand the error is because my macbook cannot find the files it needs to start up, or the hard drive has failed.
I followed the different options to the letter and each have been unsuccessful, my problem is, I have found no advice for when these instructions fail to work.
I have tried:
Holding the 'c' button when hearing the chimes
Holding both shift buttons upon starting up
Holding down CMD, ALT, P,R upon start up
And I have also inserted my install disc.
All of these end in the same result - The apple logo appears on the screen, and then after a while, the loading circle appears - It then stays like this and does not give me the option to safe boot, or choose a language, or select disc utility.
Also, I can not eject my install disk.
Please can somebody help me with what I can do, or perhaps what the next step is?
Thanks very much,
LeahHello Leah.....
That usually indicates that your Hard Drive is either failing or has failed.
Best solution is to take it to the Apple Store and have them check it out for you to see if that indeed is the problem.
As to eject your disk, power up your mb while holding the eject button or right click your trackpad until the cd ejects.
Good luck.... -
Macbook just flashes question mark. Will not start.
Recently when using my macbook it froze. I was able to turn it off but then when turning it back on it made a clicking sound, which maybe I just didn't notice before but seemed too loud. Now it just flashes a question mark when I try to turn it on. It is less than 2 years old and it has been kept in good condition. Please advise if you know how to fix this problem. Thanks.
I just had to take apart my wife's iBook to fix her screen, and the tutorial spoke about the question mark being a common problem after the fix. This is basically due to the hard drive not actually being connected to the mother board. If the system restore does not work, I would make sure that the orange ribbon coming from the hard drive is properly connected to the board.
-
MacBook Pro flashes file folder with question mark and startup manager will not run
My son's MacBook Pro won't boot (gets the flashing file folder with question mark). When I try to open startup manager (holding "option" key during boot does not do it). Other posts suggest inserting the install disk, but I am pretty sure that for Lion, there was no disk, it was just off the website through the App Store. Any further suggestions?
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
Hi when I started my intel based imac this morning all I am getting is a folder with question mark in the middle flashing,I have external hard drive with backup,but when run disc utilities it does not show my mac hard drive.hope someone can help.(it's running mountain lion, well it was)
Try starting up your Mac while holding down the Option key. That should prompt the Startup Manager window where you can select the startup disk then click Restart.
The question mark folder indicates your Mac cannot find a system folder to boot from.
A flashing question mark appears when you start your Mac -
Had to reinstall lion because of my error, but now a lot of apps. are showing up on my dock as question marks and will not open.
Ive gotten the question mark icon thing, and I just took them off the dock and redragged them onto the dock from the Applications folder again and they worked fine. Mine were a couple of game type programs nothing major yet. Just wanted to throw that out there though since I had that happen with a few dock icons.
-
Folder with Question Mark on Start-up/ DOS-like screen with errors now...
Left my Mac Pro running last night, woke up to it being frozen (looked like it was
in hibernation mode and wouldn't wake up).
Forced a shut down from button on tower - on start-up, went gray screen
with blinking folder with question mark.
Inserted install disc 1 and held down 'C' - Went to choose your lang menu,
I picked English, went to choose start-up disc. Options were the install
disc and a network drive with a question mark. I picked drive with
question mark.
Computer looked like it was trying to restart, apple with loading circle
spinning, and then blinked to a black screen that looked like DOS that was
blinking error messages (one message was "diskOs2 undefined Oxe0030005")
Any suggestions?
Mac Pro Mac OS X (10.4.9)Was there a storm or outage that could have brought it down? for now it sounds like a kernel panic screen is what you are seeing. If you don't have a UPS, I wouldn't be w/o. Never know when one of those high winds will knock out power.
You could try to do an SMC Reset and see.
I assume you usually sleep the system and it doen't have trouble with wake from sleep, and you haven't altered the system (new hardware etc) in any way that would change that. -
After updating my MacBook pro it shows only a folder with question mark on it
It is not my fault, Apple updates problem
They should solve it fir me without make any payment
ThanksTry starting your computer holding down the option key as soon as you hear the startup sound, and continue holding it. Hopefully, you will see the icon for your startup disk come up on your screen within a minute. Click on that icon and press return. If your machine starts up normally from there, go to System Preferences > Startup Disk and reselect your startup volume
-
Blinking folder with question mark! Recovery mode not recognising hard drive!
So today on my MacBook Pro 13" mid 2010, for some reason a CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside. So I looked up on how to force eject it out, and I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work. After I turned on my MacBook Pro and on the startup I found the blinking folder with question mark! I went through Internet recovery mode, and I found out that it did not recognise my hard drive!
-Do I have to replace my hard drive?
Please help! I'm fairly new with computers :(Kazmunai wrote:
I saw someone wrote that you can force eject the CD by putting a paper clip inside the hole next to the CD/DVD drive. I did this, and it did not work.
That was for very old Mac's and PC's, it's been a long time since any modern Mac had that ability.
CD that I inserted inside the DVD/CD drive didn't come out, and was stuck inside.
Press and hold the power button down to force a hardware shutdown.
Hold the trackbutton down and the option/alt key at the same time, now boot the machine.
The disk should spit out and you should eventually see a row of icons appear on the screen, this is Startup Manager and you can pres the eject key here also to get the cd to spit out.
If you see MacintoshHD (or your OS X boot volume) click it and the arrow underneath and when you get into OS X, head to System Preferences > Startup Disk and set it again. Your problem should be resolved at this point.
If you don't see your OS X boot volume and it shows RecoveryHD only, or holding the option/alt goes to Internet Recovery, then your boot drive is dead or there is some sort of other issue/power /Mac related.
Try a #1 SMC Reset and a #2 PRAM reset and see if that fixes things.
..Step by Step to fix your Mac
If not, I then suspect because you couldn't eject the cd that something electrical bad happened to the Superdrive and as a result it also effected the power or something going to the boot hard drive.
The hard drive might still work just fine if it's removed from the machine and a SATA to USB adpater to another Mac.
My advice is to take the machine to Apple for a free hardware evaluation, then decide what you want to do from there.
My computer is not working, is my personal data lost? -
Have macbook mid 2009, with leopard, updated to yosemite, while erasing partition erased hd, dot have backups, powerup shows folder with question mark, inserting grey dvd shows apple and spinning wheel, please help
Clean Install of Snow Leopard
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. Be sure you configure your initial admin account with the exact same
username and password that you used on your old drive. After you finish Setup
Assistant will complete the installation after which you will be running a fresh
install of OS X. You can now begin the update process by opening Software
Update and installing all recommended updates to bring your installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. From here you can upgrade to Yosemite by re-downloading it from the Purchases page in the App Store. -
Not solved with Blinking Folder with Question Mark after Erasing Hard Drive
Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
in response to Niel
Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
Me too had tried the command+R and failed to manually connect to my network. Can anyone help?Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true. -
i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?
Assuming that you tried to install Win 7 in bootcamp.
Power on the machine and press and hold the "option" key when you hear the bong sound.
Select the Macintosh HD icon and press "return" or just click on the icon.
Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.
Maybe you are looking for
-
Is it possible ? : Webdynpro java without SAP EP
Hi, I have an unique requirement. My customer is new to SAP EP / Java Webdynpro. He requires Webdynpro components to run without SAP EP. In other words, he wants create an ALIAS for Webdynpro component URL which is displayed when we run the component
-
What are attributes for a row?
What are attributes for a row? Are these the column names associated with the row?
-
Hello, I'm new to the forums I just started learning flash a few days ago and i am LOVING it! I already started work ona a website, but I need some help. In my website I want to have a few pictures where if you move your mouse over them they show you
-
Hi I know how to change an App icon in OS X, show package content then resources, then copy the new icon and name it same as old one, after giving the old icon a different name, but although I do that icons doesn't change, or they change randomly may
-
Oracl 9.2.0.4.0 on Fedora Core1
Hi, does any body have patches (3006854, 3119415) for FC1? I don't have access to metalink. Thanks