Finder folders not updating in real time

OS 10.8.2 - I have a folder on my desktop that I keep pdf printouts in that i generat in a MS Remote Desktop window at work. I have the folder linked thru the RDC. Prior to 10.8.1, this folder worked fine. The file would show up at the top of the window(as I have most updated selected for sorting). Now, the only way for the file to show up is if I delete an older file, any file, from that folder. Why is this happening? Any help would be greatly appreciated. I access this folder dozens of times a day and it's getting frustrating as I don't really want to delete any files from the folder.
Thanks
Macbook 13" Unibody(late 2008) OS 10.8.2

Hi Nick,
According to your description, my understanding is that the changes in the documents cannot be synced immediately to SharePoint workspace from SharePoint Server.
All content in the SharePoint workspace and the SharePoint site is automatically synchronized as frequently as possible, at minimum every 10 minutes, depending on network traffic.
Please check the network traffic in your environment.
In addition, you didn't receive the acceptance notification when you invited new people to the workspace.
Please check if the Require acceptance confirmation is enabled when you invite new people.
More references:
http://office.microsoft.com/en-in/sharepoint-workspace-help/basic-tasks-in-sharepoint-workspace-2010-HA101830011.aspx
http://technet.microsoft.com/en-in/library/ee649102(v=office.14).aspx
http://office.microsoft.com/en-in/sharepoint-workspace-help/inviting-someone-to-a-workspace-in-sharepoint-workspace-2010-HA010283378.aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Similar Messages

Edit in datasheet field is not updated in real time

Hello,
I have SharePoint 2007, a list viewed in Edit in DataSheet and a workflow attached to the list which updates a field FirstTitle in the list when the item is created.
The problem is that, while in Edit in Datasheet view, the field FirstTitle is not updated in real time so the workflow starts again and again because the field is still viewed as empty. The users keep receiving the error message "Your changes conflict
with those made concurrently by another user" (the other user being actually themselves). So they have to exit Edit in Datasheet and enter again in order to have FirstTitle field refreshed and that is annoying and totally unproductive.
I tried from SharePoint designer different checks, I used different actions like wait until item is changed and then stop but nothing worked. Is there any workaround to this ?
Thanks in advance,
Teddy
Able was I ere I saw Elba

Thanks for sharing the answer here, it is really helpful for others with the similar issue.
Qiao Wei
TechNet Community Support

MSA 4.0 SP8 : Campaign description not updated in real time while saving?

with reference to this thread : refresh/update a list , I prefered creating my own instead of upping the older one
So the problem deals with data refreshing, or data updating into the objects :
When creating a campaign, after saving, the campaign description seems not to be updated. While we can see the right value we just entered,
- in the Campaign Search menu, the description is either empty (upon creation of a new campaign) or displays the old value if the description was modified.
- we have a Crystal report based on the campaign details (among other things), and the Description field (linked to the same datasource) is either empty or has the old value.
All is back to normal if we go to the Search menu, search the Campaign and open it.
Also, when creating a new campaign, and after saving (so there would be the Description bug), right-clicking on the tile and selecting the "Refresh All" option, it displays the campaign displayed before choosing to create a new one.
What is happening ? The controls involved are still standard, so is the "Refresh bug" a known one ? (I am comforting in this idea since i found the thread linked at the beginning)
Thanks and Regards,
François

Hi,
this is a well-known issue of 4.0 (I remember that I have read that this should be changed in 5.0 by defining a specific relation type for BO relations).
The detail tile is based on business object data but the search list is based on a record set retrieved by the search.
For all linked fields/properties there is an automatic refresh but NOT for data which is stored in a dependent object.
In your example campaigns are stored in BO BOCAMPAIGN with underlying IDES table smopccampn but the campaign short texts are stored in a separate object using table smopccamna.
Unfortunately this is a very technical explanation but at least it is one...:-))
Regards,
Wolfhard

Why is Maps not updated in real time ?

I leave in Bordeaux, France. Despite my many feedback through the Maps app either on iOS or Mac no significant changes or improvment were made by Apple. The map of Bordeaux is wrong in many points. I always have to use Goggle maps or Waze for driving. Even a big bridge accross the river is missing. Some places names ames are wrong. Many POI are missing. As maps uses mostly the Yelp date base which is not very popular here in France, many palces are missing. Could Apple take this points seriously into account ? thx for reading

http://www.apple.com/feedback/macosx.html
Regards.

PSD Bug in Motion 5 - psds not updated in real time

Hi, I've described the bug here:
http://forums.creativecow.net/readpost/296/15522?wfid=335&wpid=3877
Is anyone else seeing this? In short, if PSD is changed, the change is not reflected until you close and reopen motion file, even if reconnect media is used before you close Motion. In Motion 4, this problem does not exist. Well, thx for any advice!!!
Coocoo

So now what? ha!
I noticed that you are a long way from an apple store Anthony... how long? I am in Nepal, and before Neoteric Nepal started servicing/selling apples, I was thousands of miles. Cheers,
coocoo
BTW, have you seen this bug yet:
https://discussions.apple.com/message/15522333#15522333
This one may be a showstopper for me, as I have no clue how to fix...
Message was edited by: coocooforcocoapuffs

"Activity Monitor" utility does not update the "CPU Time" column in real ti

If I use Activity Monitor to display "All Processes", why doesn't it update the "CPU Time" column in real time? It updates the "% CPU" and others, but not the total "CPU Time". I have all columns viewed if that matters. However if you double click on a process in the Activity Monitor window, the details about the process are displayed in another window (number of threads, ports, CPU Time, Context Switches, Faults, etc), and as long as that detail window exists, the "CPU Time" column is updated in real time in the main Activity Monitor window. Is this a bug or a feature?? Does Leopard do this also? Have lots of free memory so that is not an issue. Thanks...
-Bob

I noticed the same behavior reported by Bob: Not regarding the "process filter" or the "update frequency" selected "CPU Time" column is only updated when details dialog is open. I noticed it just today (which triggered the search here), I wonder if this "feature" has been always present or maybe activity monitor is getting lazy?
Regards,
Mauro

InDesign auto-size frame feature not working in real time in InCopy why?

We have just recently migrated from InCopy CS4 to CS6 to take advantage of the new features like the auto resize frame option, however it now seems that this feature is not working in real-time.
Basically the steps are needed to be complete before it auto-resizes the frame in InCopy, we use both layout and assignment based workflows:
1. From an ID document ('doc1'), exported a 'layer' to IC, certain frames are set to auto-size in height using the text frame options. So that editorial can review and make changes to text and the frame should resize according to the specifications set. IC stories are saved to a folder located in a content folder inside the top issue working folder.
2. Editorial opens the IC software, then opens the ID 'doc1'. Check’s out correct .icml file and makes edits to frame with auto resize.
3. Frame does not resize according to text frame set options and InCopy file does not respond in same fashion as InDesign.
4. Change only occurs when InCopy file is closed and updated in InDesign, which is frustrating as this feature would save huge amounts of time serving editorial requests.
Has anybody experienced this type of workflow problem? If anyone can provide mw with some pointers as to what can I do to get this to update in real time perhaps run a script? Update file in InCopy and refresh I will very much appreciate their assistance. I have run out of ideas.
Thanks!

We've had all sorts of problems with this feature as it should've worked straight out of the box but after some testing we have found that its something to do with the way you open the actual file in InCopy. Which is far from ideal and should have been UAT by Adobe before release.
This will not work consistently work if you open the designed .indd or .icma file in InCopy using the file open command within the application.
If you need this to work, the InCopy user has to open the .indd or .icma file by dragging and droping from OS windows explorer into InCopy, we use Windows 7 acrros all the teams. Check out .icml files add text changes to the set auto resized frames, this process will expand/collapse the frames to fit the content but as you have to use the drag and drop method to open the .indd and .icma file, 2 users cannot access the same time doc at the same time (a serious flaw in the programming architecture!) which stops people working in parallel. Save changes, check in .icml content and close .indd or .icma.
However the flaw comes in if you then open the .indd and .icma file in InCopy using the file open command within the application, before an InDesign user opens and saves the file (updates the design). The corrections added in the previous stage above, will not show the frames expanded/collapsed to take in the added text and instead show over matter???? The only way around this is to ask an InDesign user to open, update and save the design that way the InCopy user will see the same result no matter what file open method they use.
Another suggestion is to design the page to have some of the auto resize frames anchored within main body of text and that way the frames will expland/collapse when checking out and editing the content. However, this does cause issues with InDesign crashing etc. so we have tried to stop this method within the working group.
Have you experienced other more serious issues with InDesign crashing consistently when re-importing .icml files? See other forums here:
http://forums.adobe.com/thread/671820?start=80&tstart=0
http://forums.adobe.com/message/5045608#5045608
As far as we can see this is a major flaw in how the application(s) work, we have an enterprise agreement with Adobe and purchase a large volume of Adobe products globally but so far the technical support team are unable to find a solution to this and I'm not hopeful of any resolution soon even with the new release of Adobe CC.

Dynamic Update in real time with slider control

We have requirements to display complex data in a graphical format. So far this has gone well by leveraging ADF and DVT components (dvt:Map, dvt:gauge, dvt:bargraph, af:tables, af:inputNumberSlider, etc.); however, we recently have been asked to add real-time animation of these controls over time. In brief, the user requires the ability to control the on-screen visualization of data by sliding the control on an af:inputNumberSlider (or equivalent) that represents a multi-month time scale. While sliding this control, the user expects to see the data visualization controls dynamically update in real time, keeping up with the rate at which the user moves the slider control. Think of this like a flip book animation where the slider controls the page the user is looking at and they can flip through the pages forwards or backwards at any desired speed. The time slider increments are one hour.
Our current application architecture:
Oracle ADF Fusion Web Application (v 11.1.1.5)
EJB 3.0
Eclipselink
Oracle 11g
Any kind of help is highly appreciated.
Thanks,
Mehabub

Hi,
the af:inputNumberSlider does not provide this functionality. Your alternative is a custom component (or any component that raises a client JS event) and call an af:serverListener in a custom event to send the notification to the server.
Frank

Getting Scopes to update in real time....

So, I know I can set the Program monitor to scopes, but then I lose the program. I know I can set the reference monitor to scopes and leave the program in the program monitor, but then the scopes don't update in real time. Arrgghh!!!!
Any way to do this, or is this yet another feature request issue.....? I used this all the time in FCP and it's kinda lame not having it.

Really? I figured it was a memory issue, and that if you have a smokin fast machine that they would update in realtime. Guess not...

Updating a Real-time Infocube

Hi All,
In one of the requirements in BPS planning.
We are using the Exit function for validating the data.
In our function module we are fetching the data and two of the fields in the cube needs to be modified in the cube after completion of the validations.
I would like to know if there is any existing functionality or Function module in BPS planning for this for updating the Real-time Info cube.
Thanks
Prathish

Try this link:
www.geocities.com/cynarad/reference_for_bps_programming.pdf
In the chapter where table xth_data is described more detailed this can be one possibility to validate your realtime IC.
Have fun,
Clemens

I can not update my Face Time 1.0.1 to Version 1.0.2

I can not update my Face Time Version 1.0.1 to 1.0.2 on my iMac. When I go to Mac Sore it states that it is installed while when I check the version it is 1.0.1 and not 1.o.2 Any hel to resove this issue is appreciated.

Run Software Update on your computer if it says your system is up-to-date then it is.

If I update firefox 7 will disable my free youtube freestudio, so I will not update at this time.

If I update firefox 7 will disable my free youtube freestudio menu1.0.4 so I will not update at this time. I get this message that some of my add ons won't work, & will be disabled with this update. Also it says my yahoo toolbar will be disabled also. Firefox 6 works perfectly for me... I don't need to fix anything with it. How do I stop getting the update msgs. I will update of course when I can keep my youtube freestudio. I don't choose to disable it. I may have to switch to Chrome or back to internet explorer then.. Let me know your thoughts. I am happy with firefox, the way it is right now. I have no problems with it :) Cyrus

Try asking the Add-ons Developers if they have an Updated version to be compatible with Firefox 7.

Smart Mailboxes: Why don't they update in real time?

I have a Smart Mailbox that shows me any Unread messages i have. As i read these messages, they become Read messages, yet they remain in the Smart Mailbox. Is there any way to initiate a real time update to these so that I am not required to switch Smart Mailboxes to initiate the update.
Not very 'smart' are they…
Any solutions are welcome.d

sphereboy wrote:
That all sounds correct on paper. But in real life it just doesn't work out that way. Let's say I have 20 Unread messages in my Unread SmartMailbox. As I read each message they become Read messages. The messages do not automatically clear this mailbox. They stay there in a Read status inside the Unread Smart Mailbox. The only way I can update the mailbox is by switching over to another mailbox, any mailbox, and back to my Unread Smart Mailbox and then it properly shows only Unread messages.
And that is the correct action...the update trigger is when you move out of one and into another (acts as a confirmation that you're done).
Seems appropriate and a small price to pay. It would seem to be a burden if otherwise as it would always be working while you were trying to read....can't have everything at once

Program object schedule success but is not executed in real time

Hi all,
I have a batch file ad following is the content
set path=C:\WINDOWS\system32
echo Copying started at %date% %time%>>_date_.txt
XCOPY "
Boxis\c$\Program Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\classes\qaawsWsdl.zip" "
Sxi31\d$\Program Files\Business Objects\Tomcat55\webapps\dswsbobje\WEB-INF\classes" /s /a /d
echo Copying finished at %date% %time%>>_date_.txt
echo Completed Successfully at %date% %time%>>_date_.txt
echo -
>>_date_.txt
pause
I have uploaded this batch file in enterprise. When I schedule it the status is shown as Success however the file qaawsWsdl.zip is not copied to the destination.
Note: When executing the batch file real time the file is getting copied
I have added the user in Replace a process level token policy
I have set program object rights to run script/binaries
SIA is running on domain account that has access to source as well as destination folders.
Am I missing something?
Environment
Business Objects XI 3.1 SP3 clustered (Also tried above in standalone, same issue)
Windows Server 2003

The program object will run with the credentials of the user you provided in the schedule panel unless you did not provide any and you have set a default user account in the CMC under Application->CmC->Program object settings. THis user has to have access on the source and target directories.
What you can do is try to login manually on the BOBJ server using the credentials of the windows user that runs the program object and try to run the script from the command line.
The domain account under which the SIA is running is not really relevant
Regards,
Stratos

Archived redolog not applied in real-time : IN-MEMORY

I created a DataGuard configuratiion in Oracle 11g so that the archived redolog are applied in real-time using the log writer.
It seems to me that the last one is not applied : when consulting the v$archived_log table the last entry have the colunm applied to "IN-MEMORY" :
select THREAD#, SEQUENCE#,APPLIED, deleted from v$archived_log;
THREAD# SEQUENCE# APPLIED DEL
1 1935 YES NO
1 1936 IN-MEMORY NO
The Oracle 11g documentation say that if "IN-MEMORY" that mean not applied in the datafile.
Could someone help me to fix it ?
Why the last archived redolog is always "IN-MEMORY" ? Is there a way to change it ?

Please check the value of the column REGISTRAR and APPLIED for the logs in the standby database.
standby database:
select sequence#,registrar,applied from v$archived_log;
If REGISTRAR = RFS and APPLIED = NO, then the log file has been received but has not yet been applied.
If REGISTRAR = RFS and APPLIED = IN-MEMORY, then the log file has been applied in memory, but the datafiles have not yet been updated.
If REGISTRAR = RFS and APPLIED = YES, then the log file has been applied and the datafiles have been updated.
Try Cancelling the Managed Recovery Process and bounce the standby database

Finder folders not updating in real time

Similar Messages

Maybe you are looking for