Finder Icon--a trivial question..

Hi All,
It may be a trivial question and more to do with cosmetic then serious software or hardware issues. Anyway, last time I attended a conference, I happen to see a guy whose finder icon in the dock was with a brown color hat. I was in a hurry so I could not ask him. I tried looking online but could not find it. Does anyone of you know where to find such an icon? Is that a different program or something? I always get my icons from: http://interfacelift.com. And I could not find it there. Your help will be appreciated!
MacBook 1.83 GHz   Mac OS X (10.4.6)  

There used to an app called "Sherlock" for OSX that had a brown hat icon.
Could be that?
http://www.apple.com/lae/macosx/jaguar/sherlock.html

Similar Messages

  • Gray screen when turning on iBook G4 with tiny file folder in center of screen blinking the finder icon and a question mark.  Have tried several things.  Any help please??

    Gray screen when turning on iBook G4 with tiny file folder in center of screen blinking finder icon and question mark.  I cannot figure this out.  Tried everything I know.  Can someone help please???

    Hello,
    Ideally you need to boot from the disk as you have no other media advisable. (e.g your hard drive)
    Without some form of system disk or restore you wont be able to diagnose the problem with your hard drive.
    By using a Mac OS X system disk you can load up the Disk Utilities and repair the hard drive if shown it's available. If it's not available you would need to replace the hard drive and reinstall Mac OS. Without any disk to support you, you are going to struggle.
    You can obtain replacement disk, both retail copies or system disk on the Internet.
    If you know what version of Mac OS X you had install (I'm guessing that it would have been 10.3, but would recommend 10.4) A retail disk is normally black with a colored 'X' on it, while system disk are always.
    Always try and obtain a copy of the system restore disks (Gray) for your iBook
    Ebay is another outlet that has genuine system disk for sell, but like any auction site, it's as and when someone is selling them.
    The only other thing you could do is take it to a Apple repair agent who could check the hard drive on your behalf. That way you can get confirmation if the problem is the drive or some other fault. They may even help restore the OS for you.
    I can't think of anything else to try without some form of disk to help you.
    There maybe just one other small thing you could try.
    When booting up, firmly rest your palm of your hand on the iBook next to the tracker pad on the left side.
    If it works then it's another fault that I'm aware of.

  • What does a flashing question mark icon mean, alternating with the finder icon, at startup?

    When I power up a small folder appears against a grey screen.  Insode the folder are alternating question mark and finder icon.

    It means that your iMac cannot find an operating system to boot from.
    What version of OS X are you running?

  • How to fix the " flashing question mark after the finder icon when starting up" withou an apple keyboard?

    Hi
    I am wondering How to fix the " flashing question mark after the finder icon when starting up" without an apple keyboard. I have 2 of those .7Ghz emacs so just wanna fix them
    Thx

    Hi,
    >I am using a wireless standard keyboard so maybe the emac doesn't regognise it
    Installation of driver software may be required. Do not expect any wireless device to automatically work with a Mac unless guaranteed to do so. In a case like this, use a wired USB keyboard (a PC keyboard should be OK) and a wired mouse to begin with.
    >I have installed Ubuntu 13.00 on the HDD from another computer.
    Is it a version for PowerPC?
    https://wiki.ubuntu.com/PowerPCFAQ
    https://wiki.ubuntu.com/PowerPCDownloads
    >a list of eMac hotkey's that can be used before OS boot from a standard Windows keyboard?
    Could the following article be of interest?
    http://support.microsoft.com/kb/970299
    If/when starting from a bootable CD, press and hold the C key.
    Jan

  • PowerBook G4 Folder With Blinking Question Mark & Finder Icon At Startup

    Hi I'm a MacBook Pro user but I just dropped my friend's PowerBook G4. It froze afterwards so I held down the power button to restart it but then everytime it starts up, a folder with a blinking question mark and finder icon shows up.
    I tried restarting with the ctrl + command + power button but it shows up with the folder everytime.
    She didn't have her installation disc 1 but right now disk 2 is in the laptop and we can't get it out.
    How can I resolve this? Thank you!

    The folder with the blinkiung ? indicates that the Mac can't find a bootable OS. Try restarting holding down the track button to get the disk out of the drive.

  • Flashing Finder Icon/ Question Mark on Boot

    Today I left my 1.33ghz G4 Mac Mini turned on whilst I went to the shop.
    When I came back i found it eith a flashing finder icon/ question mark.
    I restarted it and it booted up a grey screen, then after a while the flashing finder icon/question mark.
    I have tried putting in the OSX install disc and holding down the C key to start up using the CD and nothing happen, all I get is the same grey screen and flashing icon.
    I have also tried pressing the X key, and holding it down and restarting to get up the startup disk menu, but again nothing.
    Pressing 'option' key during start up only gets me a blue background with refresh button on the left and right arrow on the right - with no Boot Up CD or HDD Icon.
    I have also tried resetting the PRAM, it resets, but after it hasn't solved my problem, as i am back to square one with the boot screen and icon.
    Any help would be appreciated.
    Thanks,
    big.bad.ben

    I would agree with DP that using a wired keyboard will give better results when holding down the C key. The timing of holding down the C key is tricky, and you might have to experiment with it.
    The question mark means that the Mini can't find a bootable disk. Usually this is because the internal hard drive has enough directory damage that it is not bootable. Usually this can be fixed by reformatting the internal drive or replacing it.
    But if you truly can't boot from the install CD, that suggests a more serious problem with the logic board or RAM memory.
    When you power-up the mini, do you get a series of beeps or light flashes? The pattern of such beeps/flashes is a diagnostic aid to determine what might be wrong. Report back with what pattern you observe.
    Be sure to give the install CD some more tries, varying the timing of holding down the C key. Usually you want to do it right after the startup chime.

  • Unable to boot - flashing finder icon with question mark.

    Hi all,
    I just got a friends old xserv G5 to learn Mac and the server suite on. He gave me the OSX Server install disk (10.5 I believe) with the license keys.
    I get the XServe into "Target Disk Mode" by turning it on holding T and plugging my friends Intel Pro MacBook into it VIA FireWire. We install the Server 10.5 to the Server Disk fine, no issues. All options checked. Then upon reboot we shutdown everything and try to boot the server up on it's own and then this is where we get the flashing finder icon problem...
    Here's what we've tried:
    I think the Firmware is locked because when I try to power on holding power + system identifier button, both rows flash instead of the one, here's what I've done
    Tried removing a memory module, booting with command, alt, p + r, no effect.
    Clear NVRM by pressing button behind PSU on mainboard of xserve. No effect.
    Unplugging and removing battery for minute, to clear. No effect.
    I guess what I'm trying to do is clear the firmware lock so I can direct the xserve to select the startup disk by pressing F1 / D as I'm assuming that's what the issue is?
    Any thoughts?

    I'm not sure about the dl-DVD thing. I'm trying to remember how I installed 10.5 on my G5 boxes (it's been a while) and I know I used the Administrator computer as described in the Getting Started guide, but I don't remember if I imaged the DVD to a firewire drive.
    The easiest short-cut for that is to image the DVD onto a firewire drive and attach that to the Xserve and run it as the install media. It's much faster to install this way as well. Use Disk Utility to image the DVD onto an external firewire and then boot holding down the option key - choose the drive and then use the notebook as an "Administrator computer" as described in the guide. The only hold-ups are the IP space issues and make sure you know the Xserve serial number. In theory I think you can also use another computer with the DVD in the drive running in firewire mode but now you're up to three computers instead of 2 plus a firewire drive.
    I've never been a fan of the notebook>>Xserve install process even before architecture issues arose. The Xserve has special hardware monitoring capabilities that you would lose when installing booted from a non-Xserve box. I know 10.5 was supposed to install a "global" image that would run on both platforms but I wouldn't trust it even if they said you could.
    HTH,
    =Tod

  • My computer suddenly refuse to start. When I turn it on it gives the startup sound but the screen is grey and after a while a little folder icon with a question mark inside turns up. It doesn't blink. What to do? Nothing happens if I try to start up from

    As I say my computer, a mac mini refuse to start. When I turn it on it gives the startup sound and the screen turns grey and stay that way for a long time. And in the end a small folder icon with a question mark inside (it doesn't blink) turns up in the middle of the screen.
    I have tried to start up from the installation CD holding down the C key on the keyboard. Same result. I have tried different key combinations while starting up. No result or rather same result. Nothing. Is the computer suddenly dead?
    I was about to buy a new computer but I need access to my data on this one (I write this on an iPad) but hven't yet found a way.
    Anybody have any good advice?
    I thought it was a software problem, that the computer couldn't find the startup software or something and maybe it is, but I am beginning to fear that it could be a hardware problem.

    You need to re install OSX. If you have the dmg file downloaded via torrentz this is how you can create a bootable external HD or Flash drive (8 GB+)
    https://discussions.apple.com/message/23957654#23957654
    Peace
    Harry

  • What does a blinking folder icon with a question mark mean when turning on computer?

    When I turn on my Mac Book Pro all I get is a blinking forder icon with a question mark in it in the middle of the screen. What does this mean and how can I fix it?

    Your Mac is not able to find a system folder to boot from so it displays the question mark.
    Allan

  • At start up I get a white screen then eventually a blinking folder icon with a question mark in the middle

    Help!  As of today, my iMac will not boot up.  When I turn it on I get a blank white screen then, after about a minute, a blinking folder icon with a question mark in the middle.

    Find your original install disk, insert it and re-boot holding the "C" key during startup. It will take longer but should boot. Then you need to select Disk Utilityfrom the Menu Bar. Do a Repair Disk on your hard drive. When it finishes re-boot normally.

  • 15" MacbWhite screen with a blinking file folder icon with a question mark on it.

    15" Macbook. When i power on all I get is white screen with a blinking file folder icon with a question mark on it.N

    You may have a bad hard drive.  The flashing folder with the ? indicates that the system cannot find your hard drive.  Use the installation disc that came with your machine.  Insert it into the disc drive and restart the machine holding down the "C" key .  When the restart shows the Apple screen you can release the C keyWhen the installation screen appears, click on the utilities button.  Does the left side of the disc utilities screen show your HD?  If not, then your HD is bad or it could be a loose connection. ifixit.com has a good tutorial on how to replace the HF in the Macbook.  Follow the instructions to remove your HD.  Reinstall your HD and boot up your machine to see if it recognizes your HD.  If it does't, you probably will need to replace your HD>
    Is your machine still under warranty?  If so, take it to your nearest Apple Store for repairs as the repairs will be covered under your warranty.  If you bought AppleCare when you bought your computer your warranty is for three years.  If you didn't buy the Apple Care, then your warranty is only good for one year from the date of purchase.

  • I was trying to open finder with the pinwheel spinning when I accidently hit the off button. When restarting a small image of the finder icon blinked on

    I was trying to open finder while the pinwheel was spinning & I accidentally hit the off button.  When I tried to restart I get a gray screen & after about a minute in the middle of the screen appears a half inch by half inch image of the finder icon that blinks on & off with a question mark. Thats all it does, no other functions work just the icon blinking on & off with the question mark.  Please help, I really hope I didn't destroy my mac.
    Julian

    A flashing question mark appears when you start your Mac
    Question (?) Mark, Blinking Folder, or Gray Screen at Startup
    These are related but not identical issues. Their causes are outlined in Intel-based Mac- Startup sequence and error codes, symbols. Solutions may be found in:
    A flashing question mark appears when you start your Mac
    Mac OS X- Gray screen appears during startup
    In most cases the problems may be caused by one or more of these:
    Problem with the computer's PRAM - See Resetting your Mac's PRAM and NVRAM.
    Boot drive's directory has been corrupted - Repair with Disk Utility.
    Critical system files are damaged or deleted - Reinstall OS X.
    The disk drive is physically non-functional - Replace the hard drive.
    Note that the information I have provided is what Apple recommends, If other users suggest different solutions than found here, then be sure what they recommend does not impact on your warranty, if any, or ability to get continuing Apple service.
    Please don't start removing drives or changing cables unless you know what you are doing and have exhausted other non-invasive alternatives outlined here. If you perform any work yourself that is unapproved by Apple, then you will void any warranty you may have and lose all further Apple Support.
    Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    The main difference if you are using Lion or Mountain Lion is that you must first boot from the Recovery HD. Simply boot from the Recovery HD to perform the above.
    Reinstall Snow Leopard Without Erasing The drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    Reinstalling Lion/Mountain Lion Without Erasing The Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Using FIND icon in Oracle Apps 11i

    I have a custom 6i form in Orcale Apps 11i which uses a search screen to find matching records. Once I open up the main form, I want to be able to go back to the search screen using the FIND icon in the toolbar (right below the Edit button). I am not sure if I have to modify the custom.pll library to do that? How do I achieve that functionality?

    Hi,
    I would try this question on an Oracle Applications forum here on OTN.
    Frank

  • Sometimes when starting my iMac it shows a folder icon with a Question mark in it. Mac does not start up, only when shutting down and restart again solves it

    Sometimes when starting up my iMac it shows only a folder icon with a question mark in it. Nothing happened. Only when start up again it runs ok.
    What can be the cause of this.
    thanks for your help
    Hans

    That's an indication your Mac can't find a system folder to boot from.
    Open System Preferences > Startup Disk
    Select:  MacintoshHD OS X
    For OS X v10.4, v10.5, and v10.6 >    A flashing question mark appears when you start your Mac
    Helps when you ask for help to tell us which Mac OS X is installed.
    If you aren't certain, click your Apple menu icon top left in your screen. From the drop down menu click About This Mac.
    The version is noted there.

  • Folder icon with a question mark now won't boot at all help?

    I get a folder icon with a question mark now it says shut down and reboot keeps doing that over and over
    Please help!

    clifffromhomosassa,
    Your system cannot find the startup volume. This can be caused by many things including a failed HD.  Please look over and trouble shoot using the Apple Flashing question mark appears when you start your Mac letter.

Maybe you are looking for

  • Reset NVIDIA GeForce 8600M GT graphics driver

    How can I reset my NVIDIA GeForce 8600M GT graphics driver in my MBP 2.2 GHz, 2 Gb RAM, Mac OS X 10.7.2?  When I start it up, white screen appears OK, but when the login window should appear, the screen goes black, and I need to connect my external m

  • Streaming music from itunes

    can you stream music from a cd over the airport express from itunes without ripping tracks into a playlist

  • Delay in iChat notifications

    So this has been happening to me increasingly as of late, but sometimes when a buddy comes online or goes offline, or if I send or receive a message, there will be a delay between the event happening and the notification (i.e., sound effect, icon bou

  • LR 3.6 and PSE 6.0 To New Computer

    I just purchased a Windows 8 computer to replace my old Windows XP computer, on which i have Lightroom 3.6 and Photoshop Elements 6.0.  My photos are on an external drive and will remain there after I install LR and PSE on my new computer.  My questi

  • Prime NCS 1.3 - Restore from 1.1.0.58

    We are facing some issues in restoring NCS backup. We did a fresh installation to NCS 1.3 and tried to restore the backup from previous version 1.1.0.58, but getting below error immediatly after stage 2 .. RGT-DC-NCS/admin# restore 24Apr2013-130424-1