FINDER in use errors and PARTIAL moves?!

I'm trying to get my hard drive cleaned up by deleting or moving stray movies or images as well as cleaning up duplicates and Finder has me really aggravated again.
Apparently this "tool" will move 300 or 400 files out of - say - 900 files ONLY UP AND UNTIL (?!) it gets some weird "in use" or "you don't have permissions" error on a file that I am not using or which is really mine??!!
Does anyone know how to fix this kind of error? Image below:
http://dl.dropbox.com/u/15285654/in_use_error.png
Does /anyone/ know how to move these 900 files without moving 50 at a time, undoing the move when you get an error because FINDER PARTIALLY MOVED the files and then doing this again in some kind of philosophical exercise?
Any experts know how to solve this once and for all?
Thanks

Can you give us the full error message you are getting?
Also, please list the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash

Similar Messages

I would like to find the object change and to move

Thank you very much, but
Sayfaları, tek tek sayfalarını bakacak bu script belgede (3, 5, 7, ...) işlem yok
I would like to object all page (height and width of the rectangle is known, the text frame) to move to find and replace
The height and width of a rectangle with known or find text frame, changing the height and width, to move to a point
I'm glad I sent you edit scprit
var findX, findY, changeX, changeY, moveX, moveY;
var diyalogWindow = app.dialogs.add({name:"RECTANGLE oR TEXT FRAME", canCancel:true});
with(diyalogWindow){
with(dialogColumns.add()){
with(borderPanels.add()){
with(dialogColumns.add()) {
staticTexts.add({staticLabel:"FİND X"});
                     findX = textEditboxes.add({editContents: "10"});
                    staticTexts.add({staticLabel:"FİND Y"});
                      findY = textEditboxes.add({editContents: "10"});
with(dialogColumns.add()) {
     staticTexts.add({staticLabel:"CHANGE X"});
                      changeX = textEditboxes.add({editContents: "50"});
                      staticTexts.add({staticLabel:"CHANGE Y"});
                      changeY = textEditboxes.add({editContents: "60"});
         with(dialogColumns.add()) {
     staticTexts.add({staticLabel:"MOVE X"});
                      moveX = textEditboxes.add({editContents: "100"});
                      staticTexts.add({staticLabel:"MOVE Y"});
                      moveY = textEditboxes.add({editContents: "10"});
if(diyalogWindow.show() == 1) {
var myDocument=app.activeDocument;
var p;
for(p=0; p < myDocument.selection.length; ++p) {
        myDocument.selection[p].move([changeX.editContents,changeY.editContents]); // ................... how contined ???

https://forums.adobe.com/message/6714843#6714843
this script
app.selection .paragraphs.everyItem (). spaceAfter = 1
its make spaceafter = 1
but how make
1
2
3
4
5
Each click, I get a continuous increase
2014-09-04 12:14 GMT+03:00 vandy88 <[email protected]>:
    I would like to find the object change and to move created by vandy88
<https://forums.adobe.com/people/vandy88> in InDesign Scripting - View
the full discussion <https://forums.adobe.com/message/6700008#6700008>

HT203167 How can I find my already bought and downloaded movies and audio book?

How can I find my lready bought and downloaded moies,music and audio books?

open itunes program, go to movies section in itunes store after logging in, on the right side there is an option for PURCHASED with a "new" in blue. select that and if they were downloaded with your apple ID, they will be there to redownload.

Photoshop CS4 Crashes when using shift and the move tool

Please help!
Everytime I click on a layer with the move tool while holding the shift button (so I can constrain the movement), photoshop crashes. I get a message that says, "Could not use the move tool because of a program error". And then photoshop just shuts down.
Now I can use the move tool without holding shift, but as soon as I hit the shift button and try them together . . . crash!
What is going on?
I'm wondering if it has something to do with an updated video driver that I installed yesterday. It wasn't doing this before that.
Suggestions anyone? Please Please Please Help!

Have you tried rolling back the driver to see if the fault disappears?
You could also try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
(A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.)

Epson R2880 - 'Communication Error' and Partial Printing

I am having trouble printing with my Epson R2880 printer on my iMac running OS X 10.6.4 with the most recent software updates.
The printer stops printing or prints about an eighth of the document and then gives a "Communication Error" message. It also gives a the error "Error: /Library/Printers/EPSON/InkjetPrinter/Filter/rastertoescpll.app/Contents/MacOS/ rastertoescpll"
This problem occurs regardless of the program I am using. I have tried printing from Adobe Photoshop CS4, Microsoft Word and Text Edit.
I have tried uninstalling and then reinstalling the printer. I have the most recent software update installed (driver 8.27).
I have uninstalled and reinstalled the driver countless times as well as unplugged the USB cables and reset the print system multiple times.
I have also "repaired disk permissions" to no avail.
I can print with no problem to my HP printer. I am most desperate for assistance.
Thanks so much to anyone with any ideas!

My name is Syd and I work for Epson America, Inc.
From your description, there appears to have been a problem while updating the printer driver. We would recommend contacting Epson technical support to determine where the issue is and hopefully resolve it. The direct number for your product is 562-276-7272.
Here to help,
Sydd

File in use error - copying from a faulty external hard drive

Hi,
I have a 750GB Western Digital external hard drive, which contains two partitions - (1) HDBACKUP - a Time Machine backup of my laptop drive, and (2) MEDIA - pictures including an Aperture library, and videos.
When I plug the drive in, only the MEDIA partition mounts. And I get an error saying Disk Utility cannot repair the drive and to backup the files as soon as I can, and reformat the drive.
When I try to copy the files onto another drive using Finder, it copies part of the file and then gives me a "File in use" error and stops. I tried copying via Terminal and its the same - this time I get a "Resource busy" error.
There are no other apps accessing the files. And this happens for every file on the drive.
So how do I go about copying the files off the drive?
I tried using DiskWarrior but it was stuck on Step 1 - Searching for Volume Information, after 3 hours.
I really need to get the Aperture Library off the drive. Any ideas on how I can copy it across?
Thanks

This did not work. I still get an error trying to repair with Disk Utility.
It gets to
Starting repair tool:
Checking file system
Checking Journaled HFS Plus volume.
Checking extents overflow file.
Checking catalog file.
Checking multi-linked files.
Checking catalog hierarchy.
Checking extended attributes file.
The volume MEDIA could not be verified completely.
Volume repair complete.
Updating boot support partitions for the volume as required.
Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
So DiskUtility tells me to backup as many files as possible. However, when I try copying these files, I get a "File in use" error.

HT201514 "sparsebundle in use" error message

I recently upgraded to Mountain Lion and ever since, have been denied access to my Time Machine/Time Capsule backup - receiving the error message: The backup disk image “/Volumes/xxxxxxxx's Time Cap/xxxxxxx MacBook Pro.sparsebundle” is already in use.
Any suggestions????

I have had the same issue.
Nothing on Pondini's C17 has worked for me.
Toggling the "enable file sharing" box and rebooting CPU & Time Capsule worked...for about 2-3 days. Then I get the same error. I gave been putting up with this for over a month. I have been to just about every forum that relates to the "sparsebundle already in use" error and no fix has worked for more than 48-72 hours.
Lion and Mt. Lion correlate with a lot of new issues for me. Getting desperate for some help.
Macbook (Late 2008 Aluminum) OSX 10.8.1
Time Capusle 2TB 7.6.1
Airport Utility 6.1

Sparsebundle in use, error codes, Mountain Lion problems!

Ok ,Apple has another bad experience on its list. So called" smooth upgrade" to Mountain Lion, clearly breaks automated back up on Time Machine. I have rebooted, and still no sustained back up. What a farce. Apple is becoming the old Microsoft.. upgrades and breaking stuff... I am VERY disappointed... what is a formal Apple answer on this. Anyone left in Cupertino , who is not working in iOs , and actually cares about Mountain Lion actually supporting stuff their store sold me ? Tim Cook, you should now be allowing this. Stock price high, customer sat with Mountain Lion- low ?

I have had the same issue.
Nothing on Pondini's C17 has worked for me.
Toggling the "enable file sharing" box and rebooting CPU & Time Capsule worked...for about 2-3 days. Then I get the same error. I gave been putting up with this for over a month. I have been to just about every forum that relates to the "sparsebundle already in use" error and no fix has worked for more than 48-72 hours.
Lion and Mt. Lion correlate with a lot of new issues for me. Getting desperate for some help.
Macbook (Late 2008 Aluminum) OSX 10.8.1
Time Capusle 2TB 7.6.1
Airport Utility 6.1

HT204053 I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing, I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose!

I had Snow Leopard and was using iWeb and Filezilla for my website (not MobileMe). Wanting to move to single-click publishing (supported by MobileMe), I now find it is not supported by iCloud and Mountain Lion. I feel cheated, having bought it mainly for this purpose! The other thing they don't tell you is that Mountain Lion disables OfficeMac, and I am considering uninstalling it for that reason - do I get my money back?!

You stated; "Mountain Lion disables OfficeMac"
That is not true.
Mountain Lion does not have Rosetta so it is not capable of executing PowerPC code. If you have MS Office 2004 that is coded in PowerPC code and will not run in Mountain Lion. What you need to do is upgrade to an Intel version of Office.
Allan

Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

Has anyone downloaded Yosemite and found that there are no ore scroll bars? I have to move the window (of any window, Skype window, browser window etc.) in order to find the scroll bar and then it disappears so fast I can't even use it.

Not sure why that was unchecked but good to know!
Apple's new default (since at least a couple of OS releases back) is to have it off so OS X matches the behavior of an iPhone or iPad.
I almost never need a scroll bar, and when I do, I just move over to the edge of the window when scrolling and a larger scroll bar appears.
Yes, for the most part, users don't really need the scroll bar. That's what the scroll wheel on almost all mice is for. Saves the trip over to bar to physically grab and move it. But, I do like it on all the time regardless. That way (especially with a long article) I can just take a quick glance over to the bar to see about where I am on the page (a third of the way down? halfway?). Otherwise, I have to move the page just to make it appear to give me the same information.

HT1498 we have rented and purchased movies to use but cannot get them to play - just says loading error try again later. Does anybody know what we are doing wrong?

we have rented and purchased movies to use but cannot get them to play - just says loading error try again later. Does anybody know what we are doing wrong? We have managed to get it to work a couple of times but that is all

Welcome to the Apple Community Tarskforce.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.
The following article(s) may help you.
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Sources of Interference
Wifi Diagnostic Software (for Mac users)

Sharepoint 2013 copy/move operation using Content and Structure fails

Hi,
We had a recent upgrade from SP2010 to SP2013 environment. After the migration, we realized that the
copy/move operations using Manage content and structure(sitemanager.aspx) is not working as expected, neither does this give any error nor is it stuck. In fact if I check the content and structure log I find the message as
succeeded but file/item is not copied to the target.
The strange thing is that if I am performing this operation with Full Control permission level it
does not work but if I do the operation as Site collection admin it works without problem. I know if sub-sites are to moved then one should be site col admin but in this case I am trying to move just documents or pages.
Any help will be greatly appreciated.
Thanks

Hi Vineet,
According to your description, my understanding is that copy/move operation using Content and Structure cannot work in SharePoint.
I recommend to check if there are any custom fields in the source list/library and target list/library. If yes, delete the custom fields to see if the issue still occurs.
Here is a similar thread for you to take a look:
http://social.technet.microsoft.com/Forums/en-US/56d803d7-8573-4c29-9f6b-c63023941f44/manage-content-and-structure-cannot-move-or-copy-items?forum=sharepointgeneralprevious
To copy or move files/items between sites, we need to have
appropriate permissions on both sites.
I recommend to check if the user has full control on both sites.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

HT201372 used this to make a bootable copy for a new hard drive installation. copied the install find but gave error code 110 when making the disk bootable.. Any help in what this code is

Used createinstallmedis to make a copy of the Mavericks app for use in a new hard drive install.. Copied find but gave error code 110 and failed to make the flash drive bootable.. Any help in what errror code means?

Did you partition and format the flash drive first? See the following:
Make Your Own Mavericks, Mountain/Lion Installer
After downloading the installer you must first save the Install Mac OS X application. After the installer downloads DO NOT click on the Install button. Go to your Applications folder and make a copy of the installer. Move the copy into your Downloads folder. Now you can click on the Install button. You must do this because the installer deletes itself automatically when it finishes installing.
2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
Open Disk Utility in your Utilities folder.
After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the leftside list. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
Select the volume you just created (this is the sub-entry under the drive entry) from the left side list.
Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
Click on the Erase button. The format process can take up to an hour depending upon the flash drive size.
Make your own Mavericks flash drive installer using the Mavericks tool:
Mavericks has its own built-in installer maker you use via the Terminal:
You will need a freshly partitioned and formatted USB flash drive with at least 8GBs. Leave the name of the flash drive at the system default, "Untitled." Do not change this name. Open the Terminal in the Utilities folder. Copy this command line after the prompt in the Terminal's window:
sudo /Applications/Install\ OS\ X\ Mavericks.app/Contents/Resources/createinstallmedia --volume /Volumes/Untitled --applicationpath /Applications/Install\ OS\ X\ Mavericks.app --nointeraction
Press RETURN. Enter your admin password when prompted. It will not be echoed to the screen so be careful to enter it correctly. Press RETURN, again.
Wait for the process to complete which will take quite some time.

My iDVD always says "it was an error during the movie encording" and it suddenly stops burning idk what to do!

Ok so i'm trying to burn a short 10-min-long film to a DVD via iDVD.... i've worked with it before and never had any trouble.
But i havent used it for 3 years now probably, and as i made the DVD menu and sub-menus for this project i worked normally
as i always did, it was easy and everything worked just fine.
The only difference this time is when i click "burn" it starts processing the menus but when it's done, instead of going to the next step which is
processing the slideshows, it automatically stops the burning and it says "there was an error during movie encording" idk why it always comes out,
what i'm doing wrongor if it just doesnt work anymore :S it also opens a new mini window that says "you have insterted a blank DVD.
Choose an action: (open finder) (open iDVD) (open iTunes) etc" so this tells me it's reading it...
i've picked all the options and it still doesnt work with any of those at this same point. I've also tried changing the preferences, the screen mode,
the video quality, EVERYTHING! nothing works! DX
anyone knows how to fix this?
it'd be truely appreciated!!!
Yours Truely, DANIELLA.

So today, I deleted that original file (this gave me the ~18.5 GB free) off my internal HD and tried to burn the project.
So the DV file iMovie is using is on the external again? If so I assume iDVD knows that...
Have you tried making a disk image?
Suggest you create a disc image and then burn the DVD. File/Save As Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may encounter. Once the disc image is created, double-click the .img and burn the virtual disc that should appear on your desktop, using Toast to burn the DVD. Disk Utility to burn the .img file. Usually, you can select a burning speed in Disk Utility.
There are variations to this process based on which OS X you are using...
Open Disk Utility (in Utilities folder in Applications folder), click on the virtual disc (maybe the .img) in the left-hand window. Click the Burn icon. A new window should drop down and your SuperDrive tray will open after clicking the Burn icon. Insert a recordable DVD. (Verbatim DVD-R preferred by me.) Click the Close button. Wait. Select a burn speed. Then click the Burn button.
-->If the virtual disk selection won't allow you to click the Burn icon, use the .img file instead. This may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk to check your iDVD project before burning to DVD. Launch DVD Player. File/Open VIDEO_TS (Open DVD Media... in Player 4.6). Find the VIDEO_TS folder and open that. (The audio folder is for DVD-Audio disks.)
http://docs.info.apple.com/article.html?artnum=93006
You could go to the iDVD 5 group and search the group for that error code. There was plenty of those there. Not much here.

When doing goods receipt and the movement from QA to unrestricted use there

Dear all,
when doing goods receipt and the movement from QA to unrestricted use there is an yellow error message
Error in EXIT_ SAPMM07_004 : Object 10462311E06/52,Char."LOBM_UDCODE,Value 01 A0,error"VALUE_NOT_FOUND"
Inspection Lot : 10000283512
System Status : UD ICCO SPRQ

Hi,
Did you use the follow up action in the UD code selection? It looks from the error that program is unable to find the UD code.
Kindly check the configurations in QM and see that everything is working fine?
Alternatively, if you are using the follow up action, then remove that first. Do the GR using MIGO -- this will create the inspection lot. Confirm the inspection using QA11 by entering the UD code for acceptance. Thereafter the the stock will rest in QI status. Use MB1B and perform the transfer posting with movement 321 to bring the stock to unrestricted use.
Regards,
Sushant

FINDER in use errors and PARTIAL moves?!

Similar Messages

Maybe you are looking for