Finder is out of order

My "Finder" don't reacted, i can't  make  restart or other...
Tanks for help

Does this mean you tried to Relaunch the Finder?
>ForceQuit>Finder>Relaunch

Similar Messages

  • In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order?

    In Acrobat pro 9, I can't find staple and fold options for booklets and no matter what options I choose in the print dialogue my booklet ends up with pages upside down and out of order? I am working on a Macbook pro running OS X 10.9.4.  Our printers are fully capable for booklets with staples and folds. Would love some help. Thank you!

    To: ~graffiti
    (This email is not intended to go on public forum -- but I wanted to respond
    to you)
    Thanks for your reply....FYI...I was trying to download from www.adobe.com on
    the specific page that has downloads of your products.    As far as the
    alternate source is concerned I am not totally sure what the capabilities it has as
    I am recovering from a hospital stay and had to send my wife to retailer to
    pick this up because I am accessing email from home until I return to work and
    need something to work now.  I don't yet have the SW.  (I would have had her
    buy the actual Adobe Pro 9.0 -- but it is a wapping $499 and change).
    Regards,
    Staurt Rednor ("Stu") - [email protected]
    ===========================================================
    Subj:   New message: "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader"   
    Date:   4/5/2009 7:38:17 PM Eastern Daylight Time  
    From:   [email protected]   
    Reply-to:   [email protected] 
    To: [email protected]  
    Sent from the Internet (Details)   
    SGuitar43,
    A new message was posted in the thread "No matter what I try can't download
    Adobe Pro 9.0 or free Adobe Reader":
    http://forums.adobe.com/message/1867664#1867664
    Author  : ~graffiti
    Profile : http://forums.adobe.com/people/~graffiti
    Message:

  • Finding out purchse order by referrring condition type.

    I want to find out purchase orders in the production system where condition type for example ZINT used in the conditions.

    Hi
    There is no direct list like this n SAP standart reports.
    But u can try to take it from tables.. i.e , You should develop a simple query linking EKKO/EKPO and KONV table.
    Firstly go to EKKO table. and take all PO numbers from here..
    Then give these PO numbers to EKKI table and take KNUMV fields from here.
    Then give these KNUMV numbers (Doc. condition) with
    KAPPL Application "M"
    KSCHL Condition type " XXXX " selection parameters to KONV table..
    you will have only the Doc. conditions related your condition type.
    Then again go to EKKI and give these new Doc. conditions .. Take PO numbers from here....
    Thanks...

  • Data written to socket getting lost?  or perhaps out of order?

    I'm trying to fix a bug in Flashmog. The bug is described in more detail here.
    Basically what is happening is that my Flash client claims that it is calling functions that don't arrive at the server -- or they arrive, but the socket data is out of order and therefore is garbled.  I've stared at the source code for hours and tried a lot of trial-and-error type stuff and added trace statements to see if I can find the problem and I'm not having any luck.
    In particular, there's class I have called RPCSocket that extends the AS3 Socket class so I can serialize data structures before sending them across a socket.  At one point, this RPCSocket class calls super.writeBytes and super.Flush.  It is the point at which I send all data out of my client. The data is binary data in AMF3 format.
              public function executeRPC(serviceName:String, methodName:String, methodParams:Array):void {
                   if (!this.connected) {
                        log.write('RPCSocket.executeRPC failed. ' + methodName + ' attempted on service ' + serviceName + ' while not connected', Log.HIGH);
                        throw new Error('RPCSocket.executeRPC failed. ' + methodName + ' attempted on service ' + serviceName + ' while not connected.');
                        return;
                   var rpc:Array = new Array();
                   rpc[0] = serviceName;
                   rpc[1] = methodName;
                   rpc[2] = methodParams;
                   var serializedRPC:ByteArray = serialize(rpc);
                   if (!serializedRPC) {
                        log.write('RPCSocket.executeRPC failed.  Serialization failed for method ' + methodName + ' on service ' + serviceName, Log.HIGH);
                        dispatchEvent(new IOErrorEvent(IOErrorEvent.IO_ERROR, false, false, 'RPCSocket.executeRPC failed.  Serialization failed for method ' + methodName + ' on service ' + serviceName));
                   super.writeUnsignedInt(serializedRPC.length);
                   super.writeBytes(serializedRPC);
                   super.flush();
              } // executeRPC
    Can someone recommend a way for me to store without corruption, conversion, or filtering or translation of any kind *all* of the information sent across this socket? I'd like to write it to a file.  I'm guessing that keep a global ByteArray var and storing the info there might work, but I'm wondering how I might get the contents of that ByteArray into a file so I can inspect it.
    Also, I'm wondering if I might be able to inspect what flash actually sends out on the socket?  I have a sneaking suspicion that data I supply to super.writeBytes may be sent out of order or may not actually get sent across the socket.  This bug I'm talking about only seems to happen under high-stress situations when I'm sending dozens of messages per second across this one socket.

    oops...forgot link to bug description: http://flashmog.net/community/viewtopic.php?f=5&t=549

  • Photos syncing from folder to iPhone all out of order?

    I have 2 folders synced to my iPhone 4 photo app.
    They were previous camera rolls before I set up my phone as a new device. They are all named in order and taken in order, for example IMG_001.jpg was my first picture in my old camera roll. IMG_822.jpg was the last photo taken before I did the backup, and is the last in the folder.
    The folder I am syncing from on my windows computer displays all of the pictures by filename (and because of that, by date) but when syncing with iTunes they end up on the phone ALL out of order. I can't find any rhyme or reason to how they are displaying. Most of the earlier photos show up at the beginning like they should, and the last at the bottom of the scroll appear to be mostly right, but then it's completely random from there.
    I've tried unsyncing them, removing them, and then adding them back again and nothing seems to work. I've even tried renaming the IMG_xxx numbers to different things and they still appear to sync in the same random order.
    Am I doing something wrong, or is this a huge bug for someone with OCD like me? lol

    This is highly annoying.
    I have probably 15-20 Smart Albums in iPhoto 8.1.2 in OS10.6.4 that are syncing to iOS4.0
    On the old software, my Smart Albums for photos would show up AS the smart albums I created. Now they show up in the iPhone one giant mess called "Photo Library".
    I can view photos broken up under "Events" on the iPhone by specific dates, but the dates don't tell me what the name of the event was, and some Smart Albums had multiple dates grouped together in one Smart Album and I don't really want them broken out separately by date. I want them organized how I organized them...
    In short, I want my photos grouped the way I have explicitly grouped them. It used to work, it doesn't now.
    Since iOS4.0 I am also getting sync errors all the time in iTunes. "iPhone cannot be synced because the required file cannot be found." WHICH FILE??? tell me and I will delete it...
    I've rebuilt the entire database in iPhoto (took 4 hours). I've scanned iTunes and removed all broken links and duplicate files. I've scanned the hard drive with the disk tool. I've emptied the iPhone and reinstalled iOS4 on it 5 times. I've turned syncing off for all non-essential applications and stuff I don't actually sync like voice memos. Same problem.
    I think I want my iOS 3 back. I don't really like multitasking anyway, always having to turn off applications for the one or two times in a million where task switching if helpful...
    Ugh....

  • Is there a way to reorganize out-of-order tracks in iTunes 11?

    Hello all--
    In iTunes 10, if an album appeared with the track numbers out of order, I could just click on the track number tab within each individual album and the tracks would be resorted by track number. In iTunes 11, I can't find a way to do the same thing. For example, I imported an album and now it starts out with track 4, then goes to 15, etc., but can't get them to sort sequentially. Any help would be greatly appreciated.
    I tried looking at one out-of-order album in the "songs" view, based on a similar question, but every time I try to search for the album under "songs" iTunes shows the result under "albums".

    here is a link to macosxhints.com that tells you how to output all of your feed URLs to a terminal window. from there you can cut and paste them into your new feed reader of choice...
    http://www.macosxhints.com/article.php?story=20080319094830396
    and if you are in the marked for a new reader may i suggest David Watanabe's excellent NewsFire. he had just recently made it totally free as a gift to the macintosh community.
    best of luck.

  • How to find that a sales order for which there is  delivery but no goods

    Hi
    How to find that a sales order for which there is  delivery but no goods issue has been done i.e we have an open delivery for a sales order.
    How in VBUK table can we find  out with the sales order no .
    Thanks in advance

    make use of table VBFA.
    Regards
    Peram

  • I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red-keys out of order, and --Volume corrupt, can't be repaired.  I tried

    I have an iMac mid 2010. After Disk utilities said the drive was corrupt, I ran the hardware test (extended) 3 times. No problems. I than ran Disk utility again and got 2 messages in red…keys out of order, and ……Volume corrupt, can't be repaired.
    I tried to do a system install, but message said…disk can't be changed. Will a complete erase and install fix this ?
    Everything is backed-up.

    There's hardware and software.
    Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes).  The directory that keep track of files is corrupt.  Disk Utility can help determine if that is the issue.  In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that.  You have to boot from another drive.  Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
    A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case.  Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
    In your situation it does sound serious and not just minor directory corruption.  You can try erasing (formatting) the drive,  You may need to do this if it is really corrupt, in which case there could be underlying physical issues.  I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation).  This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data.  If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format.  Then you know you need a new drive.

  • Automator - When using the Render PDF as Image action, the first file is out of order (naming).  How can I fix this?

    I am creating an Automator Action to render PDF files as Images.  When the PDF is multiple pages, the first page has no numbers, so it ends up at the end of the list.  Here's an example:
    When it is a single page, the result is:
    filename.png
    When it is multiple pages, the result is:
    filename 141.png
    filename 142.png
    filename 143.png
    filename 144.png
    filename.png
    First, it always seems to start at 141...not sure why.
    Second, I did try to add an action to rename and make sequential, however the resulting list was in the same order... except with additional numbers at the end.
    Any suggestions?

    I see. 
    This worked when I tested on 1 PDF:
    The Run Shell Script Action is:
    basename=${1##*/}
    echo ${basename%.*}
    If it's still out of order, add: Sort Finder Items [by creation date] after Render PDF Pages as Images

  • Macintosh HD can't be mounted, keys out of order and repairing can't be completed

    Hi,
    English isn't my mother tongue so I'll make my best to be understood.
    I have a Macbook Pro from 2012, running on Yosemite (latest version). I installed Onyx which told me my disk needed to be verified and repaired. Following this advice, I restarted my computer with Disk Utility and completed a verifying and repairing. Which led to a terrible outcome. Since then, everytime I boot with my user on my Mac, my computer shuts down in the middle of the progress bar. I tried to find an explanation to it and fix it, so I tried the following things:
    1) I booted with CMD + R to go into Disk Utility
    2) I runned a verify Disk on "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error
    3) I unlocked "Macintosh HD" Mounted encrypted partition and runned a verify disk, which says :
    "Keys out of order
    The volume Macintosh HD was found corrupt and needs to be repaired.
    File system check exit code is 8.
    Error : the disk needs to be repaired, Repair disk."
    4) Unfortunately, the "repair disk" button is grayed.
    5) So I runned repair Disk on  "Macintosh HD" Core Storage Logical Volume Disk, which didn't give me any error.
    6) I tried to boot my computer again but it still shuts down when trying to open my user.
    7) Did all the same process again, but now the error is "Keys length incorrect" and repairing is now always blocked in the middle of the progress bar.
    Is there any way I could extract the data I care about (photos, etc.) before erasing the disk or buying a new one?

    There's hardware and software.
    Your drive could physically be in good condition but something has caused the file structure to be messed up (it just happens sometimes).  The directory that keep track of files is corrupt.  Disk Utility can help determine if that is the issue.  In some cases it can repair the problem but it cannot do it to a drive that is being used to boot the system while you are doing that.  You have to boot from another drive.  Some things DU cannot repair and you need to try a stronger utility such as Diskwarrior.
    A failing hard drive (one with mechanical issues) can be a cause of file structure issues but this is by no means always the case.  Apart from looking at the SMART diagnosis feature of Disk Utility (and smart isn't totally reliable) there often isn't a way to tell if a drive is failing until it suddenly happens, which is why you need to maintain backups.
    In your situation it does sound serious and not just minor directory corruption.  You can try erasing (formatting) the drive,  You may need to do this if it is really corrupt, in which case there could be underlying physical issues.  I use old technology but if you have the patience you can try erasing the drive with the security option of writing zeros once (don't do more unless you are going on a 3 week vacation).  This makes the drive not simply assume everything is okay by forcing it try every part of the drive by writing data.  If something is gong wrong you may find it marks a lot of bad sectors, or flat out refuses to format.  Then you know you need a new drive.

  • Final Cut Express occasionally renders audio "out of order"

    I'm running into a very occasional problem, which is just rare and random enough to not be recreatable on demand, and so is proving difficult to troubleshoot.
    In a nutshell, sometimes - not very often - when I render an audio stream it will report an estimate of 6 hours or more for something even as small as a 1-second transition.  This is not a composite or layered video or audio by any means, just a standard cross-disolve/cross-fade (+3) between two adjacent clips.  When this type of extreme estimate occurs, I may find afterward that rendered audio in the sequence has been moved around, sort of like a shell game.  Usually this anomaly only happens over a minute or less of the project.  Trying to describe this, a portion of the rendered audio from one part of the timeline will replace a portion of rendered audio elsewhere -- as if some audio render segments have gotten linked out-of-order.  If memory serves, the displaced audio so far has always appeared earlier in the timeline than it should.  The replaced audio just doesn't seem to appear anywhere.  So far, if I remove the associated audio render files and re-render, it fixes the problem, but I'm trying to sort out what is causing the behaviour in the first place so that I can take steps to keep it from happening at all.  It raises havoc with trying to meet deadlines when I'm stuck re-rendering sometimes entire segments....
    For some details about the environment:
         System is a Mac Book Pro, 2.4GHz Intel core duo, 4GB RAM, OSX 10.5.8.
         I'm using FCE4, importing SD clips for TV production from Sony cameras (sorry, I'm not part of the camera crew, and I can't recall the exact model number of their cameras - they are all the same model though, configured the same, so no known variables from that end).
         The cameras record standard-def MPG (Mpeg layer 2, so yes I convert them before importing into FCE), I convert them using the ffmpeg library.  I tried FFMPEGX, but I find I have far more control over video/audio parameters and combinations with the command-line version.  The parameters I use result in a Quicktime (.mov) file with these parameters: 16-bit integer (little-endian), stereo, 48kHz, DV 720x480 (640x480), Millions (of colors).  FCE is generally quite happy with these parameters, and does not require immediate rendering of the audio or video - unless plugins are applied of course.  As far as plugs, I generally only use the built-in FCE plugs for comp/lim and parametric EQ.  If I have to get much more detailed than that, I'll go to Digital Performer (read on).
         In some cases the audio of the original clips is in quite a bad state, and requires far more detailed restoration than FCE can provide.  As I am primarily an audio engineer, I rely on Digital Performer and friends for audio restoration, exporting from there a new clip, usually duplicating the original video (self-contained), though sometimes I do let DP export a reference movie.  Final Cut doesn't seem to have any trouble with the .mov files exported from DP either way, and this anomaly doesn't seem to care whether the clips involved were processed by DP or not.
         Disk space, memory, and CPU load are all well within acceptable ranges; and with my previous years of experience as a systems admin, I am well aware of the system impact and ramifications of using internal vs external disks, memory allocation, disk filesystem operating overhead, etc.
    As I've mentioned, this is not a show-stopper, I have a work-around to correct it when it happens.  It's just a bit of a bugger *when* it happens, and I really wish I could work out the root cause of it, so that I can take steps to avoid the problem in the first place.  Any suggestions/insight/help would be greatly appreciated, thank you!  :-)

    Thank you for your response.
    Grr.  I had a nice response ready to post, and apparently the system logged me out and wouldn't let me log in while keeping the text.  I'll condense it a bit, since I've stumbled across some additional points to ponder while typing.
    The clip:
    And the sequence:
    Yes, I see that the clip is 16-bit integer and the sequence supports 32-bit float, but this should not pose a problem since modern digital audio processing up-converts smaller sample formats to larger ones on the fly for processing, and exports whatever format is desired at the end.  If this *was* the problem, I should always be off by a ratio of 2:1 on all audio data, but I'm not.
    Additional notes: the system generally has Firewire, USB, and network mounts (all required for my work), and the internal drive (which *is* 7200RPM) is partitioned into a system and a user area to keep audio and video projects out of the system's disk space.  Most main clips for a project are placed on the internal user space for speed, externals hold auxilliary files (stills, adverts, livetype, etc).
    It was at this point in my previous typing that I began to realise that the anomaly seems to begin in sync with some random livetype object.  It then extends a bit past the livetype object, so it's not locked to that object; and multiple instances of the same livetype object DO NOT result in multiple instances of the audio anomaly; it only hits a single instance; and again it usually cleans up when the audio render files are removed and re-processed.
    This leads me to wonder about a possible odd combination of events/processes on the system, and whether or not FCE handles livetype natively or requires a livetype helper (i.e., another process stuffed into the system table).  This sort of external influence would be a transient sort of event, and therefore could easily be out of the way by the time second render attempt is begun - resulting in the "fix" by removing and re-generating audio render files.
    It makes sense to me, but it's still hypothesis and supposition at this point.

  • ITunes U courses listings out of order? Hegarty - Coding Together

    Paul Hegarty's iTunes U course named "Coding Together - Apps for iPhone and iPad" lists its courses in a confusing order, it seems. (See image below).  The number system is inconsistently applied and out of order, the dates are jumbled, etc.
    How can I know what order to take the courses?  (Believe me, I've tried to find the answer before posting this).

    Vague789 wrote:
    Set your track numbers correctly (by right clicking, clinking 'Get Info' and clicking on the info tab), and make sure you also set the totals (e.g. 12 of 18 - the "of 18" is what I mean by the totals). This sorted it out on my iPod.
    This worked for me for my Teaching Company files. They were all jumbled previously because they took the track numbers from the default import from the internet. Once I changed it, no problem.
    It would be better if Apple allowed just a dragging, or if there was a quick tool, but at least this works.
    I had previously been using "Join Together" for stuff like this. I think I like this method better, though. I can still keep the individual lecture files on a playlist, but not have to worry about all the separate titles in a general listing.

  • Task Line Numbers Move Out of Order When Adding Resource to a Task

    I am using MS Project 2013 and we are in the process of setting up Project Server 2013. 
    When I add a resource to a task and close the summary task and re-open the task is moved to the bottom of that section and the line numbers are out of order.
    For example line number 382 is the third task under the summary task.  When I add a resource, hide the subtasks and then expand the subtasks line number 382 is now at the bottom after line 389.  The line numbers then go 381, 383, 384... until 389
    then 382 is after 389.
    I want to keep the tasks in sequential order.
    Has anyone seen this problem before?  I have done extensive research online and cannot seem to find any one with a similar issue.
    Thank you! :)

    Hi Dnbree,
    Do you have any filters applied to the view in Project Pro? Try to change view and check if you experience the same issue.
    Also check if the view uses a sorting in the view tab of the ribbon, such as sort by resources.
    Hope this helps.
    Guillaume Rouyre - MBA, MCP, MCTS

  • Photos randomly out of order when published to my gallery!

    Photos are in the right order in iPhoto on my mac (Library, Albums, Web), but when the album is published to my gallery the photos are completely and randomly out of order.
    The name of each photo is just the number given by the camera, and iPhoto had correctly imported the folder of photos in chronological order from a hard disk.
    Also, there are videos which sometimes work in the gallery, but for some it says quicktime cannot play the video, and sometimes the video is UPSIDE DOWN!
    How can I get the correct order (and functioning videos)?
    Thanks

    In the gallery on the web, I see no pattern to the random order.
    Aha! In iPhoto (back on my mac), I now see that the order from the import at the beginning ("events") is not the same as the original folder (where all files were in order of file number). I see the problem there - iPhoto imports the photos in the correct order until it encounters a video. The videos (.mov) are mostly in the wrong place, although I found one in the right place (just to make it impossible to say always, grr).
    Then when the mostly in order (apart from videos out of order) "album" is published to the web gallery, photos and videos are completely out of order.
    I had never tried including videos in photo albums in iPhoto, I think because in previous versions this was impossible. So I had published one video at a time to its own "album" on the gallery. Maybe iPhoto is mixed up by these videos in with photos. Strange though, because it gives details about how many photos and how many videos in the album, and seems to act like this would be possible.
    So, resetting the order in iPhoto does not allow me to republish maintaining this order. In the publishing process, somehow all are randomly mixed up. The only way I can see to reorder everything in the gallery is to move them all manually there in the gallery when connected to my account at me.com
    I had hoped to find a better solution, because this would take a long time to do.
    Message was edited by: chasmania

  • HT4236 Syncing my photo library to my phone, albums out of order

    Syncing my Aperture photo library to my phone from my Yosemite MacBook Pro (I also tried it with iPhoto and same store), the projects (called albums in iPhoto) are all out of order - just random.  I use a naming convention of date then name with the date in the format YYYYMMDD so even if it were to be resorted, they would be in chronological order.  They are in that order within Aperture and also on the screen in iTunes where I select which projects I wish to sync.  But then after syncing, they are all there in the Photos app, but in random order.  I'm a photographer and often need to access a photo from a session that I need to be able to find quickly and I pretty much can find what I need when it's sorted correctly.  I believe this problem only came about after a recent update of the software, which may have been with Yosemite.  Please help.  Thanks.  Steven

    See my previous post on Grouping Tracks Into Albums, in particular the topic Tracks out of sequence.
    tt2

Maybe you are looking for