Finder Locks Up When Using AEBS Attached Drives & Network Backup

This might be more of a general discussion as well as specific to my situation:
I have a new Airport Extreme Base Station with two drives attached via USB powered hub. #1 is an OWC 1TB drive and #2 is a Seagate Momentus 500GB drive. Both are HFS+, and I have never had any issues when attached locally.
I am attempting to back up using CCC and/or SuperDuper to the Seagate with a sparse bundle. Both programs hang up when trying to locate the drive. I am able to Force Quit once, but if I run the programs again the Finder locks up and I can't recover it even using Terminal.
I'm not sure what the problem might be. The network mounted drives are always visible; these lock ups seem to only occur when trying to backup. I've read Finder can be tempermental with networking.
I suppose, for troubleshooting, I should attach one drive directly and go from there?

Similar Messages

ITunes Locking Up When Using External Hard Drive

Has anybody else had any trouble with ITunes locking up for about 30 seconds at a time. The music keeps playing but the cursor locks up and you can't click, use hot keys, etc. I'm using a 150GB external hard drive to store my music and while it's locked up the hard drive is crunching something, almost like ITunes is looking for something. All of my files are organized, no viruses or spy-ware that I can find. Doesn't happen with any other audio program, just ITunes. I've watched the CPU usage on Task Manager when it happens and the only thing that is running is ITunes. Please help!

I came across your post because, I have been having issues for a while with the same description, except that I am using separate partitions on my main drive.
What I noticed is that if I set my podcast downloads to go to my NTFS main partition, there is no lag... but the moment I set it to my FAT32 partition, the lag starts back up.
I believe that the issue is with the slooow write time to FAT32 in large drives. (And in my instance, the move command apple does to put the podcast, which writes to the FAT32 partition and removes the NTFS temp download) Do you see the same lag or alot shorter if the drive is formatted to NTFS?
I don't really have any space currently to format my partition to test the issue, but I the fact of the downloads speeding up when set to my NTFS main disk makes me think that this issue could be lessened by using FAT32.
a side note for me, I'm considering reformatting my drive to NTFS, after backing up due to the advancement of ntfs3g in linux, so this could solve my problem at least.

Finder locking up when browsing Time capsule hard drive

Finder locking up when browsing Time capsule hard drive
I am able to browse the hard drive preview some videos or open files for around 5-10 mins then Finder locks up. Internet still works and I can relaunch Finder and then works for a while again. It sounds like the hard drive is just going to sleep. I watch some films directly off of the hard drive through VLC and these just stop wilst viewing them.
I am on 10.6.2 working on the 5GHZ channel on dual band time capsule.
It is really annoying I have tried a few things like resetting the DCHP Lease. But it seems to be specific to the hard drive as the internet still works fine. It is really annoying as it jams up the finder really awkwardly.
Ant ideas most wanted
Thanks

Are you browsing/viewing files in Time Machine backups on your Time Capsule, or files you've put there yourself?
If the files are Time Machine backups, use the Time Machine interface (the "Star Wars" display), via the Time Machine icon in your dock (or in your Applications/Utilities folder) to see what's there. Backups are not meant to be used; they're duplicates that can be restored in case of a problem with the originals on your system.
If the files are things you put there, you'll do better browsing, searching, or re-posting in the +Time Capsule+ forum, hiding in the +Digital Life+ section, at: http://discussions.apple.com/forum.jspa?forumID=1253

Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver

Trying to Install RMS application 13.2.2 and I get past the pre-installation checks and when I get to the Data Source details and enter the data source details with the check box checked to validate the schema/Test Data Source I get the following error:
Error Connecting to database URL jdbc:oracle:oci:@rmsdbtst as user rms13 java.lang.Exception:UnsatisfiedLinkError encountered when using the Oracle driver. Please check that the library path is set up properly or switch to the JDBC thin client oracle/jdbc/driver/T2CConnection.getLibraryVersioNumber()
Checks performed:
RMS Application code location and directory contents:
[oracle@test-rms-app application]$ pwd
/binary_files/STAGING_DIR/rms/application
[oracle@test-rms-app application]$ ls -ltr
total 144
-rw-r--r-- 1 oracle oinstall   272 Dec 7 2010 version.properties
-rw-r--r-- 1 oracle oinstall   405 Jan 16 2011 expected-object-counts.properties
-rw-r--r-- 1 oracle oinstall   892 May 13 2011 ant.install.properties.sample
-rw-r--r-- 1 oracle oinstall 64004 Jun 6 2011 build.xml
drwxr-xr-x 9 oracle oinstall 4096 Jun 16 2011 rms13
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 installer-resources
drwxr-xr-x 3 oracle oinstall 4096 Jun 16 2011 antinstall
drwxr-xr-x 2 oracle oinstall 4096 Jun 16 2011 ant-ext
drwxr-xr-x 5 oracle oinstall 4096 Jun 16 2011 ant
-rw-r--r-- 1 oracle oinstall 11324 Dec 18 09:18 antinstall-config.xml.ORIG
-rwxr-xr-x 1 oracle oinstall 4249 Dec 18 10:01 install.sh
drwxr-xr-x 4 oracle oinstall 4096 Dec 18 10:06 common
-rw-r--r-- 1 oracle oinstall 16244 Dec 19 10:37 antinstall-config.xml
-rw-r--r-- 1 oracle oinstall   689 Dec 19 10:37 ant.install.log
[oracle@test-rms-app application]$
Application installation:
[oracle@test-rms-app application]$ ./install.sh
THIS IS the driver directory
Verified $ORACLE_SID.
Verified SQL*Plus exists.
Verified write permissions.
Verified formsweb.cfg read permissions.
Verified Registry.dat read permissions.
Verified Java version 1.4.2.x or greater. Java version - 1.6.0
Verified Tk2Motif.rgb settings.
Verified frmcmp_batch.sh status.
WARNING: Oracle Enterprise Linux not detected. Some components may not install properly.
Verified $DISPLAY - 172.16.129.82:0.0.
This installer will ask for your "My Oracle Support" credentials.
Preparing installer. This may take a few moments.
Your internet connection type is: NONE
Integrating My Oracle Support into the product installer workflow...
     [move] Moving 1 file to /binary_files/STAGING_DIR/rms/application
Installer preparation complete.
MW_HOME=/u01/app/oracle/Middleware/NewMiddleware1034
ORACLE_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/as_1
ORACLE_INSTANCE=/u01/app/oracle/Middleware/NewMiddleware1034/asinst_1
DOMAIN_HOME=/u01/app/oracle/Middleware/NewMiddleware1034/user_projects/domains/rmsClassDomain
WLS_INSTANCE=WLS_FORMS
ORACLE_SID=rmsdbtst
JAVA_HOME=/u01/app/oracle/jrockit-jdk1.6.0_45-R28.2.7-4.1.0
Launching installer...
To make sure I have connectivity from the app server to the database (on a database server) here are the steps followed:
[oracle@test-rms-app application]$ tnsping rmsdbtst
TNS Ping Utility for Linux: Version 11.1.0.7.0 - Production on 19-DEC-2013 10:41:40
Copyright (c) 1997, 2008, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = test-rms-db.vonmaur.vmc)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SID = rmsdbtst)))
OK (0 msec)
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ sqlplus rms13@rmsdbtst
SQL*Plus: Release 11.1.0.7.0 - Production on Thu Dec 19 10:46:18 2013
Copyright (c) 1982, 2008, Oracle. All rights reserved.
Enter password:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> exit
Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ ping test-rms-db
PING test-rms-db.vonmaur.vmc (192.168.1.140) 56(84) bytes of data.
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=1 ttl=64 time=0.599 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=2 ttl=64 time=0.168 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=3 ttl=64 time=0.132 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=4 ttl=64 time=0.158 ms
64 bytes from test-rms-db.vonmaur.vmc (192.168.1.140): icmp_seq=5 ttl=64 time=0.135 ms
--- test-rms-db.vonmaur.vmc ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4001ms
rtt min/avg/max/mdev = 0.132/0.238/0.599/0.181 ms
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ uname -a
Linux test-rms-app.vonmaur.vmc 2.6.18-128.el5 #1 SMP Wed Jan 21 08:45:05 EST 2009 x86_64 x86_64 x86_64 GNU/Linux
[oracle@test-rms-app application]$
[oracle@test-rms-app application]$ cat /etc/*-release
Enterprise Linux Enterprise Linux Server release 5.3 (Carthage)
Red Hat Enterprise Linux Server release 5.3 (Tikanga)
[oracle@test-rms-app application]$
The database is created and all the batch file scripts have been successfully deployed. Now working on the application server. The Weblogic server is installed and 11g forms and reports are installed successfully.
Any help would be helpful.
Thanks,
Ram.

Please check MOS Notes:
FAQ: RWMS 13.2 Installation and Configuration (Doc ID 1307639.1)

SQL Developer 3.2 crashes with java error when using OCI/Thick Driver

I just installed SQL Developer 3.2 on my linux desktop. SQL Developer crashes with a java error when I select a database from the object tree.
When I check Use OCI/Thick driver the application will crash when I navigate to the tree and open a database.
The app does not crash then I have Use OCI/Thick driver unchecked.
Here are some details of my environment:
Desktop OS: Fedora 17 Linux
$ uname -a
Linux 3.5.1-1.fc17.x86_64 #1 SMP Thu Aug 9 17:50:43 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux
Java:
$ java -version
java version "1.6.0_34"
Java(TM) SE Runtime Environment (build 1.6.0_34-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.9-b04, mixed mode)
Oracle instant client:
$ sqlplus -V
SQL*Plus: Release 11.2.0.3.0 Production
Here are the error messages:
$ sqldeveloper
Oracle SQL Developer
Copyright (c) 1997, 2011, Oracle and/or its affiliates. All rights reserved.
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0x00007f6de7157664, pid=3049, tid=140109371119360
# JRE version: 6.0_34-b04
# Java VM: Java HotSpot(TM) 64-Bit Server VM (20.9-b04 mixed mode linux-amd64 compressed oops)
# Problematic frame:
# V [libjvm.so+0x516664] unsigned+0xd4
# An error report file with more information is saved as:
# /tmp/hs_err_pid3049.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
/opt/sqldeveloper/sqldeveloper/bin/../../ide/bin/launcher.sh: line 544: 3049 Aborted (core dumped) ${JAVA} "${APP_VM_OPTS[@]}" ${APP_ENV_VARS} -classpath ${APP_CLASSPATH} ${APP_MAIN_CLASS} "${APP_APP_OPTS[@]}"

I also had the problem of SQL Developer crashing when using OCI/Thick driver but I've managed to solve it. My configuration is:
- Windows 64-bit
- Java 64-bit (1.6.0.34)
- SQL Developer 3.2.09 64-bit
- OCI Instant client 11.2.0.3 64-bit (without installation).
The thing that solved the problem was copying two files, ojdbc5.jar and ojdbc6.jar, from Instant client installation folder to JAVA_HOME/lib/ext folder+.
After that, I haven't had a single crash or error message.
The same trick that solved the problem on 64-bit installation also solved the problem on another windows computer with 32-bit SQL Developer installation.

How do I lock safesearch when using BING

how do I lock safesearch when using BING search engine

I assume you're using the "Content Aware" option for the Spot Healing brush. It can be a maddeningly stupid option -- there's no telling from how far away it will pull the replacement pixels and will leave streaks that can be very difficult to remove.
It would be best for you to include a sample image that's giving you the problem so we can suggest the best way to attack it.
In general, the "Content Aware" option works best when you use a very small brush size. That pulls in pixels closer to the area you want to heal. If you get streaks, sometimes you can use the Spot Healing brush to get rid of them by going over the area in a perpendicular direction to the streaks.
Ken

First time using external hard drive for backup of computer....

First time using external hard drive for backup of computer....it asks "Do do you want to erase disk?" In order to proceed, I have to say "yes" ... is that what I want to do? ...Seems like I'm skipping a step...

To use Disk Utilities, attach the drive, open Finder > Applications > Utilities > Disk Utilities and then highlight the LaCie drive in the left panel of the DU window. In the right panel, choose the Partition button top center of the pane. Then decide how many partitions you want on the drive, one is just fine.
Then choose the format, the default is Mac OS Extended (Journaled) which is prefered.
Then name the partition or drive.
Then choose the partition table, the default is GUID which is prefered.
Then Apply and you will get to confirm that you want to erase and format the drive.
Quit DU and you are ready to go.

HT4946 iTunes shows I have an encrypted backup under preferences. It's got the pad lock. When I click restore the encrypted backup is not an option. I've been test MDM products and may have caused this. How do I restore the encrypted backup.

iTunes shows I have an encrypted backup under preferences. It's got the pad lock. When I click restore the encrypted backup is not an option. I've been test MDM products and may have caused this. How do I restore the encrypted backup.

I just came here today to ask the same question.
I have an iPod Gen2 with version 4.2.1 iOS, and iTunes 11.0.2.26
My iPod Touch was running sluggish so I backed up and selected the "Encrypt local backup" to "back up account passwords used on my iPod".
I selected a password for this backup and restored my iPod Touch.
When I went to restore from backup, that encrypted backup is not available on the drop down list.
However, if I go to the top of ITunes and click "Edit", "Preferences" "Device", it shows the back up with the pad lock on it.
I thought I was being smart backing up with encryption to back up account passwords, but now I have lost everything.
So many people have the issue where it asks for a password when they never told iTunes to do an encrypted backup and here we are with an encrypted backup, and we know the password, but we don't get the option to restore from it.

Finder locks up when attempting to access files on external drive

HI all,
I am experiencing a sinking feeling at the moment - I have been editing large amounts of video in a particular project and on recent captures I found I only had about 5gb left on my external Maxtor 300gb hard drive, which aborted the last capture, reporting "dropped frames" in final cut pro.
History has shown this happens when the hard drive gets close to running out of space.
I went to finder to delete some unneccessary files but when I try to, finder locks up and does not allow me to access any of the files. I believe this is also to do with the fact that the space is getting low, but how do I get into the files to delete them when finder won't let me do so?
At the same time I am hoping this is not a hard drive failure in the making...
Thanks
David

Ok - for a while there, the hard drive would not come up on the desktop - but now on a re-boot of the compter, or if I disconnect the hard drive and re-connect it, a message comes up with three buttons which say:
Initialize
Ignore
Eject
Sound like the hard drive has died?

User experience difference between using Timecapsule vs using AEBS USB drive?

We have a couple of macbook pro's. Is there any difference between how Time Machine behaves when your network has either Timecapsule, when compared to using an AEBS with an attached USB drive.
I already have an AEBS and am wondering if I can get away with just buying a USB drive instead of having to also buy a Time capsule?
What I am most worried about is that I have seen possibly incorrect information that when using the AEBS you have to manually connect (aka mount ) the USB drive every time you want to do a backup?

"If there is a large # of machineID, this computation can take O(N!) time"
if that is even a remotely expected use-case, sorting and searching within a sorted list are both simple problems, and will reduce that to O(n log n)

Machine freezez/lock ups when using password protected certificates in IE 11 Windows 8.1 Pro

When using certificates that have a password enabled and private keys we find the machine hangs up competly with the memory usage jumping to 99%. The main process being the Local Secuirty Authority Process that causes the machine to lock up. The work
around we have is to remove this certificate and import a new certificate making sure we un-tick the check box for private key password.
Not sure if this
KB2813237 is linked, but this hotfix is available for Windows 8.1 Pro OS.

Hi Simon,
You can try that suggestion and check whether it is solved and give your result, if there is any other issue, you can post it back.
Regards
Wade Liu
TechNet Community Support

Error when using the Attach to Email... Feature

I currently using Adobe Reader 8.0 as well as Adobe Acrobat Professional 8.0. Whenever I try to use the Attach to Email... feature I get a debugging error. It always brings up the Visual Studioi Just-In-Time Debugger. It will create the email, but it will not attach the document at all. I've also tried this on a computer that only has Adobe Reader 8.0 on it. When using that computer, it always gives me an error message naming the .dll file gwmlt1.dll.
I can't seem to find what the issue is with this feature. Any help would be very much appreciated.
Also, We are using Windows XP on all of our computers here. If anyone needs any additional information about this, just let me know.
Thanks in advance for any help.
TPrime

gwmlt1.dll is something to do with GroupWise (your e-mail system)
Maybe Novell can help.
Aandi Inston

Finder locks up when there is network traffic

Mac Mini Intel Core Dual 2007
OSX 10.4.8
Recently i had an issue where a Mac Mini 2007 (first Intel Mini) which worked perfectly for years didn't boot anymore.
I checked ran a check of the harddisk using Disk Utility and it turned out that both boot records, the main partition and the Recovery partition were corrupt.
I was able to boot from an external disk and save my data, so i was lucky.
I replaced the harddrive and tried to install OSX from the DVD only to find out that after appx 1 minute into the install the Finder would stop working. Spinning beachball.
Maybe this drive was also bad, so i replaced the drive again with yet another harddisk. Same situation.
So maybe something happened to the memory, maybe when a certain spot on the memory gets used the Finder stops. So i replaced the memory as well. Same situation.
What else can i swap out? Video is on board, so i decided to remove the Wifi card, just as a test. Then the installer runs correctly and the Mini works as expected. I was able to reinstall OSX and since i don't use Wifi, and assuming the Wifi adapter was at fault, i left the Wifi card out and reinstalled OSX.
That was in my lab. But when i moved the Mini to its place and hooked up the ethernet cable again i got the same symptom. After appx.1 minute Finder stops.
When i boot the Mini without the ethernet cable it boots ok. When i connect the ethernet cable i get the same symptom as when i had the Wifi adapter in the Mini, after 1 minute Finder stops.
The ethernet adapter is working because when i configure an IP address that is already on the network i get an error message. This can only happen if the adapter is able to listen on the cable.
I reset the PRAM, tried Safe boot all with the same result.
Any idea what might have happened here?
Thanks,
Ton.

system.log
Jun 6 17:54:44 localhost DirectoryService[11]: Improper shutdown detected
Jun 6 17:54:40 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 6 17:54:54 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:14) starting
Jun 6 17:54:54 localhost configd[15]: BUG in libdispatch: 10A432 - 1656 - 0xa30f
Jun 6 17:54:54 Toontjes-Mac-mini configd[15]: setting hostname to "Toontjes-Mac-mini.local"
Jun 6 17:54:54 Toontjes-Mac-mini configd[15]: network configuration changed.
Jun 6 17:54:55 Toontjes-Mac-mini configd[15]: Sleep - Filtered Sleep Failure Report - Power Button Shutdown - Early Failure
Jun 6 17:54:57 Toontjes-Mac-mini bootlog[43]: BOOT_TIME: 1402070074 0
Jun 6 17:54:57 Toontjes-Mac-mini fseventsd[37]: event logs in /.fseventsd out of sync with volume. destroying old logs. (705 23 58876)
Jun 6 17:54:57 Toontjes-Mac-mini fseventsd[37]: log dir: /.fseventsd getting new uuid: 1F2A324C-CFF3-4B36-9120-FC3BBB6AEB7E
Jun 6 17:54:57 Toontjes-Mac-mini com.apple.usbmuxd[27]: usbmuxd-167.1 built for iTunesEightTwo on Jul 9 2009 at 14:02:00, running 32 bit
Jun 6 17:54:57 Toontjes-Mac-mini blued[44]: Apple Bluetooth daemon started
Jun 6 17:54:57 Toontjes-Mac-mini /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[33]: Login Window Application Started
Jun 6 17:54:58 Toontjes-Mac-mini loginwindow[33]: Login Window Started Security Agent
Jun 6 17:54:59 Toontjes-Mac-mini loginwindow[33]: Login Window - Returned from Security Agent
Jun 6 17:54:59 Toontjes-Mac-mini loginwindow[33]: USER_PROCESS: 33 console
Jun 6 17:54:59 Toontjes-Mac-mini com.apple.launchd.peruser.501[72] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Jun 6 17:55:01 Toontjes-Mac-mini com.apple.launchd.peruser.501[72] (com.apple.Kerberos.renew.plist[97]): Exited with exit code: 1
Jun 6 17:55:04 Toontjes-Mac-mini WindowServer[54]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jun 6 17:55:04 Toontjes-Mac-mini com.apple.WindowServer[54]: Fri Jun 6 17:55:04 Toontjes-Mac-mini.local WindowServer[54] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jun 6 17:55:27 Toontjes-Mac-mini _mdnsresponder[110]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
Jun 6 17:55:27 Toontjes-Mac-mini _mdnsresponder[113]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
Jun 6 17:55:27 Toontjes-Mac-mini _mdnsresponder[113]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.euro.apple.com
Jun 6 17:55:27 Toontjes-Mac-mini _mdnsresponder[113]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
Jun 6 17:55:40 Toontjes-Mac-mini fseventsd[37]: could not open <</Volumes/Untitled 1/.fseventsd/fseventsd-uuid>> (No such file or directory)
Jun 6 17:55:43 Toontjes-Mac-mini fseventsd[37]: log dir: /Volumes/Untitled 1/.fseventsd getting new uuid: E88E6A82-E349-43AE-B890-4A1FBB044006
Jun 6 17:55:43 Toontjes-Mac-mini mds[32]: (Normal) DiskStore: Creating index for /Volumes/Untitled 1
Jun 6 17:55:47 Toontjes-Mac-mini mdworker[125]: (Error) SyncInfo: searchfs error (Result too large) -- falling back to fsw search /
Jun 6 17:56:36 Toontjes-Mac-mini configd[15]: network configuration changed.
Jun 6 18:00:20 localhost com.apple.launchd[1]: *** launchd[1] has started up. ***
Jun 6 18:00:26 localhost DirectoryService[11]: Improper shutdown detected
Jun 6 18:00:35 localhost mDNSResponder[17]: mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:14) starting
Jun 6 18:00:36 localhost configd[14]: network configuration changed.
Jun 6 18:00:36 Toontjes-Mac-mini configd[14]: setting hostname to "Toontjes-Mac-mini.local"
Jun 6 18:00:37 Toontjes-Mac-mini configd[14]: Sleep - Filtered Sleep Failure Report - Power Button Shutdown - Early Failure
Jun 6 18:00:38 Toontjes-Mac-mini bootlog[46]: BOOT_TIME: 1402070413 0
Jun 6 18:00:38 Toontjes-Mac-mini fseventsd[40]: event logs in /.fseventsd out of sync with volume. destroying old logs. (257 25 341)
Jun 6 18:00:38 Toontjes-Mac-mini fseventsd[40]: log dir: /.fseventsd getting new uuid: BA7A6CFF-FB56-4314-9D28-CE142454FF73
Jun 6 18:00:39 Toontjes-Mac-mini com.apple.usbmuxd[30]: usbmuxd-167.1 built for iTunesEightTwo on Jul 9 2009 at 14:02:00, running 32 bit
Jun 6 18:00:39 Toontjes-Mac-mini blued[47]: Apple Bluetooth daemon started
Jun 6 18:00:39 Toontjes-Mac-mini /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[36]: Login Window Application Started
Jun 6 18:00:40 Toontjes-Mac-mini loginwindow[36]: Login Window Started Security Agent
Jun 6 18:00:41 Toontjes-Mac-mini loginwindow[36]: Login Window - Returned from Security Agent
Jun 6 18:00:41 Toontjes-Mac-mini loginwindow[36]: USER_PROCESS: 36 console
Jun 6 18:00:41 Toontjes-Mac-mini com.apple.launchd.peruser.501[74] (com.apple.ReportCrash): Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
Jun 6 18:00:42 Toontjes-Mac-mini com.apple.launchd.peruser.501[74] (com.apple.Kerberos.renew.plist[103]): Exited with exit code: 1
Jun 6 18:00:50 Toontjes-Mac-mini WindowServer[57]: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jun 6 18:00:50 Toontjes-Mac-mini com.apple.WindowServer[57]: Fri Jun 6 18:00:50 Toontjes-Mac-mini.local WindowServer[57] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
Jun 6 18:01:09 Toontjes-Mac-mini _mdnsresponder[115]: /usr/libexec/ntpd-wrapper: scutil key State:/Network/Global/DNS not present after 30 seconds
Jun 6 18:01:09 Toontjes-Mac-mini _mdnsresponder[118]: sntp options: a=2 v=1 e=0.100 E=5.000 P=2147483647.000
Jun 6 18:01:09 Toontjes-Mac-mini _mdnsresponder[118]: d=15 c=5 x=0 op=1 l=/var/run/sntp.pid f= time.euro.apple.com
Jun 6 18:01:09 Toontjes-Mac-mini _mdnsresponder[118]: sntp: getaddrinfo(hostname, ntp) failed with nodename nor servname provided, or not known
Jun 6 18:02:10 Toontjes-Mac-mini SecurityAgent[129]: com.apple.desktopservices|2014-06-06 18:02:10 +0200
Jun 6 18:04:59 Toontjes-Mac-mini SecurityAgent[129]: com.apple.desktopservices|2014-06-06 18:04:59 +0200

M-Audio not connectin when using firewire 800 drive

Computers that have both a FireWire 400 and a FireWire 800 port may be sharing the same FireWire bus internally. When using both, the 400 and the 800 port at the same time, you may experience problems like audio drop outs or loss of connection to the M-Audio FireWire interface. There's a variety of possible reason for this including but not limited to bandwidth limitations, clocking issues (400/800) and bus master problems with the devices connected to both ports. M-Audio recommends using the M-Audio FireWire audio interface on the computers original FireWire port while adding a separate FireWire interface card to the system (PCI or PCMCIA). Connect any third party FireWire 800 devices to the added FireWire interface card.
But will this really fix the problem?
M-audio says yes & apple says maybe.
Sound like a serious flaw with apples firewire bus.

Damian,
Following are my experiences. My setup is listed down below.
-Yes, that will fix the problem. The bottom line is, M-audio FW box doesn´t like to share disk drives on the G5 firewire bus (both 400 aand 800). So yes, 400 and 800 FW ports are somehow connected internally, sharing the same resources.
-I had a spare FW 400 PCI card lying around, and I attached my disk drives to that. Didn´t start to look around for a FW 800 card though.
-And although it seems like a fault on Apple´s side too, I can´t speak very highly on the FW410 box either. Every time I do an update on my system, the 410 install gets messed up (won´t show devices in AudioMidiSetup, the only cure is to uninstall and re-install).
And the other interesting thing is that every time my Mac boots up, the 410 control panel mixer page is all messed up with funny pan positions and fader values. A reset does the job, but this has to be done every time I boot up. Maybe this is working in Tiger.
I tried solving this with the M-Audio support, and after describing my problem, they just said I should call their tech support. Being on the other side of the world, I shurely don´t wanna max out my phone bill.
Haven´t upgraded to Tiger yet, don´t want to keep upgrading all the time. In general the system is working nicely.
B.R.
J. Lampela
www.neomusic.fi
My setup
G5 1.8 DP 2,5 Gb RAM
Panther 10.3.9
1 external S-ATA (LaCie)
2 external FW
M-Audio FW410 (1.5. driver)
Logic Pro 7.1

HT3275 I am using an external drive for backup. I am now getting a message that the drive needs a disk repair, but when I run disk repair it just seems to freeze.

I am using an external drive for back up. Yesterday the backup failed and I received a message that the external drive( a passport drive) needed a 'disk repair", when I ran disk repair nothing happened it seemed to freeze. Suggestions? should i simply erase the external drive and start over-my computer is fine.

Get a different drive for backup.
In the meantime, once you are backed up some drive safe, then you can attempt to repair the backup drive using the repair the directory link.

Finder Locks Up When Using AEBS Attached Drives & Network Backup

Similar Messages

Maybe you are looking for