Finder Methods - Does xmlbeans support this?

Finder Methods - Does xmlbeans support this?
Hi,
Q1 - Is there currently a mechanism via generated xmlbeans java classes to
find specific data required (from within the java generated methods
provided). For example assuming in the following xml (see below) if one has
already loaded the <main-item> via xmlbean generated java classes, but then
wishes to find the appropriate configs/config within this section of the xml
(i.e. the main-item entry "config" is a reference to one of the "config"
items under "configs") , does XMLBeans currently support this? That is, it
would be nice to have finder methods on the generated java classes so once
you have a <configs> java instance you can issue a finder method for a
<config> item and pass the <config-name> in. For example:
What is available: MainXML.getConfigs().getConfig(23) -> i.e. put in
index,
However what about: MainXML.getConfigs().findConfig ("mainConfig");
Q2 - If there is no support for this within the generated java classes what
is recommended? Via xpath? Have to write your own short java finder classes
which iterate through until the item is found?
ATTACHMENT - XML REFERED TO
============================
< MainXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="xxx.xsd">
<configs>
<config>
<config-name>mainConfig</config-name>
<report_width>1</report_width>
</config>
<config>
<config-name>testConfig</config-name>
<report_width>0</report_width>
</config>
</configs>
<main-config>
<main-item>
<itemName>TestItem</itemName>
<config>mainConfig</config>
</main-item>
</main-config>
</sns_config>
Cheers
Greg

thanks Steve
"Steve Traut" <[email protected]> wrote in message
news:[email protected]...
Hello Greg,
To my knowledge, the reference-specific kind of function you're asking for
isn't supported. But if you're writing code on WebLogic Platform 8.1, you
can use XPath/XQuery to accomplish this. Incidentally, your XML belowopens
with MainXML and closes with sns_config, but I'll assume it's MainXML.
To retrieve a main-config/main-item/config element when you know the
config-name element's value, you could use the following expression (where
the mainXml variable is a MainXMLDocument instance):
String queryExpression = "$this/MainXML/configs/config[config-name=
'mainConfig']";
ConfigType[] configs =
(ConfigType[])mainXml.selectPath(queryExpression);
The configs array would contain one item in this case. The second linewould
throw a class cast exception if no results were returned.
Note that XPath predicates aren't supported in XMLBeans outside thecontext
of WebLogic, but simple path expressions are.
Steve
"greg" <[email protected]> wrote in message news:1074728633.92236@ns1...
Finder Methods - Does xmlbeans support this?
Hi,
Q1 - Is there currently a mechanism via generated xmlbeans java classes
to
find specific data required (from within the java generated methods
provided). For example assuming in the following xml (see below) if onehas
already loaded the <main-item> via xmlbean generated java classes, butthen
wishes to find the appropriate configs/config within this section of thexml
(i.e. the main-item entry "config" is a reference to one of the
"config"
items under "configs") , does XMLBeans currently support this? That is,it
would be nice to have finder methods on the generated java classes so
once
you have a <configs> java instance you can issue a finder method for a
<config> item and pass the <config-name> in. For example:
What is available: MainXML.getConfigs().getConfig(23) -> i.e. putin
index,
However what about: MainXML.getConfigs().findConfig ("mainConfig");
Q2 - If there is no support for this within the generated java classeswhat
is recommended? Via xpath? Have to write your own short java finderclasses
which iterate through until the item is found?
ATTACHMENT - XML REFERED TO
============================
< MainXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="xxx.xsd">
<configs>
<config>
<config-name>mainConfig</config-name>
<report_width>1</report_width>
</config>
<config>
<config-name>testConfig</config-name>
<report_width>0</report_width>
</config>
</configs>
<main-config>
<main-item>
<itemName>TestItem</itemName>
<config>mainConfig</config>
</main-item>
</main-config>
</sns_config>
Cheers
Greg

Similar Messages

  • I want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help

    want to use icloud on my macbook and cant because I am using OSX10.6.8 - I want to upgrade this but I cant upgrade to mountain lion as my mac does not support this - cannot find a way to go to Version 10.7.4 which i understand supports icloud - help to do this please

    If you purchased Lion for your iMac, just log into the Mac App Store from your MacBook using the Apple ID under which you purchased Lion and go to the Purchases page. You will be able to download and install Lion there. 
    searching the internet i found a link to upgrtade to 10.7
    The only place you get get Lion is from the Mac App Store. If you found some other site, that was an illegal copy and almost certainly tied to someone else's Apple ID and hence unusable by you. If the link was just to the Mac App Store, see above.
    As to the problem with synchronization to iCloud, that's not a 10.6 question, so I'd suggest you take up that specific issue in either the Lion or iCloud forums, providing full details, and someone there can probably help you sort things out.
    Regards.

  • Strange IE ExternalInterface Bug: "Object does not support this property or method"

    We have an application on a relatively slow server (I mention
    the speed because it may be relevant).
    The app is flash 8 and uses ExternalInterface to call a
    javascript function in its parent page. It also used the
    ExternalInterface to receive a call from another function. These
    calls happens separately (the outbound one calls up a list view of
    items, clicking on an item calls up the details in the flash
    movie). In between the calls, the flash movie is hidden by moving
    it off screen using absolute positioning.
    On my local development box (Windows XPSP2) this works fine
    in both directions.
    On our production server (LAMP) this works fine in both
    directions in Firefox 1.5 and 2.0
    BUT while the outbound call from Flash to the page works fine
    in Internet Explorer 6 or 7, the call back from the page to the
    flash movie fails with the error messgage "Object does not support
    this method or property"
    We've tried not hiding the flash so it is always present on
    the page and still the browser > flash communication breaks in
    ie.
    We've tried using both the Adobe active content script and
    swfobject to embed the flash in the page with no difference in the
    resultset. In truth we've given up and gone to a two-page solution,
    reloading the flash from the start each time but I wondered if
    anyone had encountered a similar issue? Can't see why it would work
    perfectly in FF but not in IE.

    Not sure if this is your problem, but you do reference the
    Flash object
    differently, depending on the browser. In a video player we
    made, that uses
    JS to communicate back to Flash, I use a function like this
    to modify the
    variable depending on the browser:
    function changeVideo(xname){
    //ff
    if(window.vplayer){
    window.document["vplayer"].SetVariable("theXML", xname);
    window.document["vplayer"].GotoFrame(2);
    window.document["vplayer"].Play();
    //ie
    if(document.vplayer){
    document.vplayer.SetVariable("theXML", xname);
    document.vplayer.GotoFrame(2);
    document.vplayer.Play();
    The Flash is in a <div> named 'vplayer'
    Dave -
    Head Developer
    http://www.blurredistinction.com
    Adobe Community Expert
    http://www.adobe.com/communities/experts/

  • "...does not support this type of alias."

    I just reinstalled the OS 10.4 onto my G5 using the erase and install function. The drive is formatted as a Mac OS Extended (Journaled), which is an HFS+ format. I'm trying to copy some files onto the main hard drive from a DVD. I keep getting an error message that says "[the file name] cannot be copied to the destination, perhaps because the destination does not support this type of alias." I researched the message and the only thing I could find was that the error appears if the destination disk is formatted as a UFS disk. I thought maybe I made a mistake when I reinstalled the OS, so I tried to copy the same files to the secondary internal drive and to an external Firewire drive, and I got the same message both times.
    What should I be looking for so that this will work? I'm going to post in a couple other topics, but any help would be greatly appreciated.
    Thank you in advance,
    Lloyd

    Barry,
    I was trying to make back-up copies of my Adobe CS2 disks by copying the disks to the hard drive then burning them to CDs, but I got the error message when I dragged the contents from the original CD to the HD.
    This worked, but it took a while: I Stuffed each CD to the HD, then unStuffed them and used Toast to burn a new CD. A few steps longer, but at least it worked.
    Now, if I could only figure out why the second internal drive does not have the "Ignore Permissions" check box available, I'd be all set.
    Thanks,
    Lloyd

  • Hp the system recovery media does not support this computer, WIN7 GS72 Notebook

    HProduct: GS-B66US (17" I3 notebook)
    OS:             Win7
    Bios Rev:   F.47
    Error message: "hp the system recovery media does not support this computer.  You are not able to restore this system"
    Changes made to system:  Updated bios (I think).
    Getting error messages (at system boot, as windows start, and from the intel hard drive controller) warning me to backup data and hard drive my fail.
    I replaced the harddrive and inserted the first of my 4 recovery DVDs (created before I updated the bios).  After booting from the first recovery disk I get the following message
    "hp the system recovery media does not support this computer. You are not able to restore this system with the media"
    The computer still boots with the old hard drive (with drive failure imminent messages)  I do see support assistant offering another bios update but I did not install it with the hard drive problem
    PLEASE HELP
    TIA

    Hi,
    I think there could be two possible reason. wrong media or systemboard is changed.
    did you create any recovery media yourself or you ordered the recovery media from hp? also, was there any systemboard replacement done before?
    media created on some other computer (same model) may not work on your computer.
    you can order the media from hp.com here.
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c00810334
    also once systemboard is replaced you need to get the configuration settings done for BIOS(only HP can do it).
    hope it helps
    Regards,
    WW
    “I am an HP Employee“
    ***** Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

  • [unixODBC][Driver Manager]Driver does not support this function {IM001}

    Hello,
    I start from the end and details show below - this error message i got in sql session:
    SQL> select count(*) from EnergyType@ENERGOPLAN;
    select count(*) from EnergyType@ENERGOPLAN
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    ORA-02063: preceding 2 lines from ENERGOPLAN
    SQL>
    First question - is Oracle Heterogeneous Services are licensed for standard edition ? I cant find this information, and my database - is SE 11.2.0.3.0 - 64bit.
    If its ok and HS are licensed for SE, then please see details of my problem:
    ----OS and packages version
    [oracle@aris_sv_db log]$ uname -a
    Linux aris_sv_db 2.6.18-308.24.1.el5 #1 SMP Tue Dec 4 17:43:34 EST 2012 x86_64 x86_64 x86_64 GNU/Linux
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ rpm -qa | grep odbc
    [oracle@aris_sv_db log]$ rpm -qa | grep unixodbc
    [oracle@aris_sv_db log]$ rpm -qa | grep unixODBC
    unixODBC-libs-2.2.11-10.el5
    unixODBC-libs-2.2.11-10.el5
    unixODBC-devel-2.2.11-10.el5
    unixODBC-2.2.11-10.el5
    unixODBC-devel-2.2.11-10.el5
    [oracle@aris_sv_db log]$ rpm -qa | grep freetds
    freetds-0.91-1.el5.rf
    [oracle@aris_sv_db log]$
    -----ODBC.INI, ODBCINST.INI and FREETDS.CONF
    [oracle@aris_sv_db log]$ more /home/oracle/.odbc.ini
    [ENERGOPLAN]
    Driver = FreeTDS
    Servername = ENERGOPLAN
    Database = ess2
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ more /etc/odbcinst.ini
    # Example driver definitions
    [FreeTDS]
    Description = MSSQL Driver
    Driver = /usr/lib64/libtdsodbc.so.0
    #Setup = /usr/lib64/libtdsodbc.so.0
    #Driver = /usr/lib64/libodbc.so
    #Driver = /usr/lib/libodbc.so
    UsageCount = 1
    Trace = Yes
    TraceFile = /tmp/freetds.log
    [ODBC]
    DEBUG = 1
    TraceFile = /tmp/sqltrace.log
    Trace = Yes
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ more /etc/freetds.conf
    # A typical Microsoft server
    [ENERGOPLAN]
    host = 192.168.10.64
    port = 1433
    tds version = 8.0
    # client charset = UTF-8
    client charset = cp1251
    [oracle@aris_sv_db log]$
    ----CHECK CONNECT from ODBC
    [oracle@aris_sv_db log]$ isql -v ENERGOPLAN user pass
    | Connected! |
    | |
    | sql-statement |
    | help [tablename] |
    | quit |
    | |
    SQL> select count(*) from EnergyType;
    | |
    | 8 |
    SQLRowCount returns 1
    1 rows fetched
    SQL> [oracle@aris_sv_db log]$ tsql -S ENERGOPLAN -U user -P pass
    locale is "en_US.UTF-8"
    locale charset is "UTF-8"
    using default charset "cp1251"
    1> select count(*) from EnergyType;
    2> go
    8
    (1 row affected)
    1> [oracle@aris_sv_db log]$
    ----LISTENER.ORA, TNSNAMES and initENERGOPLAN.ora
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # listener.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
    # Generated by Oracle configuration tools.
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    SID_LIST_ENERGOPLAN =
    (SID_LIST =
    (SID_DESC=
    (SID_NAME=ENERGOPLAN)
    (ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1)
    (PROGRAM=dg4odbc)
    (ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/dbhome_1/lib")
    ENERGOPLAN =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = IPC)(KEY = PNPKEY))
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.10.72)(PORT = 1523))
    ADR_BASE_LISTENER = /u01/app/oracle
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
    # tnsnames.ora Network Configuration File: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
    # Generated by Oracle configuration tools.
    ORCL =
    (DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = orcl)
    ENERGOPLAN =
    (DESCRIPTION=
    (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523))
    (CONNECT_DATA=(SID=ENERGOPLAN))
    (HS=OK)
    [oracle@aris_sv_db log]$ more /u01/app/oracle/product/11.2.0/dbhome_1/hs/admin/initENERGOPLAN.ora
    # This is a sample agent init file that contains the HS parameters that are
    # needed for the Database Gateway for ODBC
    # HS init parameters
    HS_FDS_CONNECT_INFO = ENERGOPLAN
    #HS_FDS_CONNECT_INFO = 192.168.0.199:1433//test
    HS_FDS_TRACE_LEVEL = DEBUG
    #HS_FDS_TRACE_FILE_NAME = /tmp/hs1.log
    HS_FDS_TRACE_FILE_NAME = /u01/app/oracle/product/11.2.0/dbhome_1/hs/log/mytrace.log
    HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbc.so #/usr/lib64/libtdsodbc.so.0
    #HS_FDS_SHAREABLE_NAME = /usr/lib64/libtdsodbc.so.0
    #HS_FDS_SHAREABLE_NAME = /usr/lib/libodbc.so
    #HS_LANGUAGE=american_america.we8iso8859p1
    #HS_LANGUAGE=AMERICAN_AMERICA.AL32UTF8
    #HS_LANGUAGE=AMERICAN_AMERICA.CL8MSWIN1251
    #HS_LANGUAGE=RUSSIAN_RUSSIA.UTF8
    #HS_LANGUAGE=Russian_CIS.AL32UTF-8
    #HS_FDS_FETCH_ROWS=1
    HS_NLS_NCHAR = UCS2
    HS_FDS_SQLLEN_INTERPRETATION=32
    # ODBC specific environment variables
    set ODBCINI=/home/oracle/.odbc.ini
    set ODBCINSTINI=/etc/odbcinst.ini
    #HS_KEEP_REMOTE_COLUMN_SIZE=ALL
    #HS_NLS_LENGTH_SEMANTICS=CHAR
    #HS_FDS_SUPPORT_STATISTICS=FALSE
    # Environment variables required for the non-Oracle system
    #set <envvar>=<value>
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ tnsping ENERGOPLAN
    TNS Ping Utility for Linux: Version 11.2.0.3.0 - Production on 01-APR-2013 16:27:49
    Copyright (c) 1997, 2011, Oracle. All rights reserved.
    Used parameter files:
    /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
    Used TNSNAMES adapter to resolve the alias
    Attempting to contact (DESCRIPTION= (ADDRESS=(PROTOCOL=tcp)(HOST=192.168.10.72)(PORT=1523)) (CONNECT_DATA=(SID=ENERGOPLAN)) (HS=OK))
    OK (0 msec)
    [oracle@aris_sv_db log]$
    ----CREATE DBLINK and test from sqlplus
    CREATE DATABASE LINK "ENERGOPLAN" CONNECT TO "user" IDENTIFIED BY "pass" USING 'ENERGOPLAN';
    [oracle@aris_sv_db log]$ sqlplus / as sysdba
    SQL*Plus: Release 11.2.0.3.0 Production on Mon Apr 1 16:30:14 2013
    Copyright (c) 1982, 2011, Oracle. All rights reserved.
    Connected to:
    Oracle Database 11g Release 11.2.0.3.0 - 64bit Production
    SQL> select count(*) from EnergyType@ENERGOPLAN;
    select count(*) from EnergyType@ENERGOPLAN
    ERROR at line 1:
    ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    ORA-02063: preceding 2 lines from ENERGOPLAN
    SQL>
    ----logs from hs and odbc
    [oracle@aris_sv_db log]$ tail -50 ENERGOPLAN_agt_12117.trc
    12 VARCHAR N 100 100 0/ 0 1000 0 200 ConsumptionYearCostUOM
    3 DECIMAL N 24 24 9/ 3 0 0 0 ConsumptionYearFactorAmount
    -7 BIT N 1 1 0/ 0 0 0 20 NeedToBeApprovedByREK
    Exiting hgodtab, rc=0 at 2013/04/01-16:30:42
    Entered hgodafr, cursor id 0 at 2013/04/01-16:30:42
    Free hoada @ 0x14e5fd20
    Exiting hgodafr, rc=0 at 2013/04/01-16:30:42
    Entered hgopars, cursor id 1 at 2013/04/01-16:30:42
    type:0
    SQL text from hgopars, id=1, len=36 ...
    00: 53454C45 43542043 4F554E54 282A2920 [SELECT COUNT(*) ]
    10: 46524F4D 2022454E 45524759 54595045 [FROM "ENERGYTYPE]
    20: 22204131 [" A1]
    Exiting hgopars, rc=0 at 2013/04/01-16:30:42
    Entered hgoopen, cursor id 1 at 2013/04/01-16:30:42
    hgoopen, line 87: NO hoada to print
    Deferred open until first fetch.
    Exiting hgoopen, rc=0 at 2013/04/01-16:30:42
    Entered hgodscr, cursor id 1 at 2013/04/01-16:30:42
    Allocate hoada @ 0x14e5fd80
    Entered hgodscr_process_sellist_description at 2013/04/01-16:30:42
    Entered hgopcda at 2013/04/01-16:30:42
    Column:1(): dtype:4 (INTEGER), prc/scl:10/0, nullbl:1, octet:0, sign:1, radix:0
    Exiting hgopcda, rc=0 at 2013/04/01-16:30:42
    Entered hgopoer at 2013/04/01-16:30:42
    hgopoer, line 231: got native error 0 and sqlstate IM001; message follows...
    [unixODBC][Driver Manager]Driver does not support this function {IM001}
    Exiting hgopoer, rc=0 at 2013/04/01-16:30:42
    hgodscr, line 407: calling SQLSetStmtAttr got sqlstate IM001
    Free hoada @ 0x14e5fd80
    hgodscr, line 464: NO hoada to print
    Exiting hgodscr, rc=28500 at 2013/04/01-16:30:42 with error ptr FILE:hgodscr.c LINE:407 FUNCTION:hgodscr() ID:Set array fetch size
    Entered hgoclse, cursor id 1 at 2013/04/01-16:31:24
    Exiting hgoclse, rc=0 at 2013/04/01-16:31:24
    Entered hgocomm at 2013/04/01-16:31:24
    keepinfo:0, tflag:1
    00: 4F52434C 2E343535 32623466 342E362E [ORCL.4552b4f4.6.]
    10: 32322E37 363237 [22.7627]
    tbid (len 20) is ...
    00: 4F52434C 5B362E32 322E3736 32375D5B [ORCL[6.22.7627][]
    10: 312E345D [1.4]]
    cmt(0):
    Entered hgocpctx at 2013/04/01-16:31:24
    Exiting hgocpctx, rc=0 at 2013/04/01-16:31:24
    Exiting hgocomm, rc=0 at 2013/04/01-16:31:24
    Entered hgolgof at 2013/04/01-16:31:24
    tflag:1
    Exiting hgolgof, rc=0 at 2013/04/01-16:31:24
    Entered hgoexit at 2013/04/01-16:31:24
    Exiting hgoexit, rc=0
    [oracle@aris_sv_db log]$
    [oracle@aris_sv_db log]$ tail -50 /tmp/sqltrace.log
    Native = 0x7fff6ca974f4
    Message Text = 0x14e5f968
    Buffer Length = 510
    Text Len Ptr = 0x7fff6ca97750
    [ODBC][12117][SQLGetDiagRecW.c][582]
    Exit:[SQL_SUCCESS]
    SQLState = IM001
    Native = 0x7fff6ca974f4 -> 0
    Message Text = [[unixODBC][Driver Manager]Driver does not support this function]
    [ODBC][12117][SQLGetDiagRecW.c][540]
    Entry:
    Statement = 0x14e399f0
    Rec Number = 2
    SQLState = 0x7fff6ca97700
    Native = 0x7fff6ca974f4
    Message Text = 0x14e5f908
    Buffer Length = 510
    Text Len Ptr = 0x7fff6ca97750
    [ODBC][12117][SQLGetDiagRecW.c][582]
    Exit:[SQL_NO_DATA]
    [ODBC][12117][SQLEndTran.c][315]
    Entry:
    Connection = 0x14dbd4b0
    Completion Type = 0
    [ODBC][12117][SQLGetInfo.c][214]
    Entry:
    Connection = 0x14dbd4b0
    Info Type = SQL_CURSOR_COMMIT_BEHAVIOR (23)
    Info Value = 0x7fff6ca9781e
    Buffer Length = 8
    StrLen = 0x7fff6ca9781c
    [ODBC][12117][SQLGetInfo.c][528]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLEndTran.c][488]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLDisconnect.c][204]
    Entry:
    Connection = 0x14dbd4b0
    [ODBC][12117][SQLDisconnect.c][341]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLFreeHandle.c][268]
    Entry:
    Handle Type = 2
    Input Handle = 0x14dbd4b0
    [ODBC][12117][SQLFreeHandle.c][317]
    Exit:[SQL_SUCCESS]
    [ODBC][12117][SQLFreeHandle.c][203]
    Entry:
    Handle Type = 1
    Input Handle = 0x14dbb0c0
    [oracle@aris_sv_db log]$

    To see which ODBC function DG4ODBC is looking for and unixODBC isn't supporting it would be best to get an ODBC trace file. But as your unixODBC driver (unixODBC-2.2.11-10.el5) is outdated and these old drivers had a lot of issues when being used on 64bit operating systems (for example wrong sizeofint etc). So best would be to update the unixODBC Driver manager to release 2.3.x. More details can be found on the web site: www.unicodbc.org
    - Klaus

  • [ODBC Driver Manager] Driver does not support this function

    HI every body
    In Win Server 2008 R2 , I tried to retrieve data from my ODBC Driver
     by Report Builder , my connection test is successful , but after any retrieve data by SQL Statement I encounter with this Error :
    IM0001: [Microsoft] [ODBC Driver Manager] Driver does not support this function
    I use Win Server 2008 R2 , and my ODBC Driver installed on :
    %SystemRoot%\SysWOW64\odbcad32.exe
    Can anyone help me to solve this problem, its realy urgent for me ,
    PLEASE HELP ………………..

    ODBC Driver name is PMSDK (32 bit) and installed by Primavera software
    I use SQL Report Builder to connect the driver and try SQL Statement in it
    Report Builder may be executing an ODBC function to retrieve meta data, and that function is not supported by the PMSDK driver.  Are you using the latest version of the PMSDK driver?  You might try turning on ODBC tracing to find out the problem
    function. 
    Dan Guzman, SQL Server MVP, http://www.dbdelta.com

  • "Exchange organisation does not support this version of Exchange server"

    I am facing the error "Exchange Organisation does not support this version of exchange server" at time of installation of exchange server 2007 in the Windows server 2008 Enterprise edition.
    I have already installed exchange Server 2010 in the that domain.
    The following the image that show the error that i am facing
    I have the checked current Active Directory or Exchange Server schema version by using
    Using that i got the following information
    "dsquery * cn=schema,cn=configuration,dc=india,dc=local -scope base -attr objectVersion"
    objectVersion = Windows Server 2008 RTM
    CN=ms-Exch-Schema-Version-Pt,cn=schema,cn=configuration,dc=india,dc=local -scope base -attr rangeUpper"
    rangeUpper = 14726 ( Exchange server 2010 sp1)
    I am attaching the Exchange server setup logs here
    [5/31/2013 3:04:28 PM] [0] **********************************************
    [5/31/2013 3:04:28 PM] [0] Starting Microsoft Exchange 2007 Setup
    [5/31/2013 3:04:28 PM] [0] **********************************************
    [5/31/2013 3:04:28 PM] [0] Operating System version: Microsoft Windows NT 6.1.7600.0.
    [5/31/2013 3:04:28 PM] [0] Setup version: 8.1.240.6.
    [5/31/2013 3:04:28 PM] [0] Logged on user: INDIA\administrator.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='mode', Value='Install'.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='sourcedir', Value='C:\Exchange2007'.
    [5/31/2013 3:04:28 PM] [0] Command Line Parameter Name='fromsetup', Value=''.
    [5/31/2013 3:04:28 PM] [0] ExSetupUI was started with the following command: '-mode:install -sourcedir:C:\Exchange2007 /FromSetup'.
    [5/31/2013 3:04:29 PM] [0] Setup is choosing the domain controller to use
    [5/31/2013 3:04:29 PM] [0] Setup is choosing a local domain controller...
    [5/31/2013 3:04:31 PM] [0] Setup has chosen the local domain controller NewDelhi.india.local for initial queries
    [5/31/2013 3:04:31 PM] [0] PrepareAD has either not been run or has not replicated to the domain controller used by Setup. Setup will attempt to use the Schema Master domain controller NewDelhi.india.local
    [5/31/2013 3:04:31 PM] [0] The schema master domain controller is available
    [5/31/2013 3:04:31 PM] [0] The schema master domain controller is in the local domain; setup will use NewDelhi.india.local
    [5/31/2013 3:04:31 PM] [0] Setup is choosing a global catalog...
    [5/31/2013 3:04:31 PM] [0] Setup has chosen the global catalog server NewDelhi.india.local.
    [5/31/2013 3:04:31 PM] [0] Setup will use the domain controller 'NewDelhi.india.local'.
    [5/31/2013 3:04:31 PM] [0] Setup will use the global catalog 'NewDelhi.india.local'.
    [5/31/2013 3:04:31 PM] [0] Exchange configuration container for the organization is 'CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=india,DC=local'.
    [5/31/2013 3:04:31 PM] [0] No Exchange organization container was found for the organization. Message: 'Could not find the Organization Container.'.
    [5/31/2013 3:04:31 PM] [0] Setup will search for an Exchange Server object for the local machine with name 'PONDY'.
    [5/31/2013 3:04:31 PM] [0] No Exchange Server with identity 'PONDY' was found.
    [5/31/2013 3:04:31 PM] [0] The following roles are unpacked: 
    [5/31/2013 3:04:31 PM] [0] The following roles are installed: 
    [5/31/2013 3:04:31 PM] [0] The local server does not have any Exchange files installed.
    [5/31/2013 3:04:31 PM] [0] Setup will use the path 'C:\Exchange2007' for installing Exchange.
    [5/31/2013 3:04:31 PM] [0] The server is cluster type: 'None'.
    [5/31/2013 3:04:31 PM] [0] The requested cluster type: 'None'.
    [5/31/2013 3:04:31 PM] [0] The installation mode is set to: 'Install'.
    [5/31/2013 3:04:31 PM] [0] Exchange organization name is required for this mode.
    [5/31/2013 3:04:31 PM] [0] Active Directory Initialization status : 'True'.
    [5/31/2013 3:04:31 PM] [0] Schema Update Required Status : 'False'.
    [5/31/2013 3:04:31 PM] [0] Organization Configuration Update Required Status : 'True'.
    [5/31/2013 3:04:31 PM] [0] Domain Configuration Update Required Status : 'False'.
    [5/31/2013 3:04:32 PM] [0] Applying default role selection state
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 5 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
    [5/31/2013 3:04:32 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:32 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:32 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:32 PM] [0] InstallModeDataHandler has 6 DataHandlers
    [5/31/2013 3:04:32 PM] [0] RootDataHandler has 1 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 5 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:44 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:44 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:44 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:44 PM] [0] InstallModeDataHandler has 1 DataHandlers
    [5/31/2013 3:04:46 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:46 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:46 PM] [0] Setup will run from path 'C:\Exchange2007\Setup\ServerRoles\Common'.
    [5/31/2013 3:04:46 PM] [0] InstallModeDataHandler has 4 DataHandlers
    [5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
    [5/31/2013 3:04:48 PM] [0] Validating options for the 0 requested roles
    [5/31/2013 3:04:53 PM] [0] Setup is determining what organization-level operations to perform.
    [5/31/2013 3:04:53 PM] [0] Setup has detected a missing value. Setup is adding the value PrepareOrganization.
    [5/31/2013 3:04:53 PM] [0] Because the value was specified, setup is setting the argument OrganizationName to the value First Organization.
    [5/31/2013 3:04:53 PM] [0] **************
    [5/31/2013 3:04:53 PM] [0] Setup will run the task 'test-setuphealth'
    [5/31/2013 3:04:53 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $true -ExchangeVersion '8.1.240.6' -Roles 'Global' -ScanType
    'PrecheckInstall' -SetupRoles 'Global' -PrepareOrganization $true'  
    [5/31/2013 3:04:53 PM] [1] Beginning processing.
    [5/31/2013 3:05:24 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
    [5/31/2013 3:05:24 PM] [1] Ending processing.
    [5/31/2013 3:05:24 PM] [0] **************
    [5/31/2013 3:05:24 PM] [0] Setup will run the task 'test-setuphealth'
    [5/31/2013 3:05:24 PM] [1] Setup launched task 'test-setuphealth -DomainController 'NewDelhi.india.local' -DownloadConfigurationUpdates $false -ExchangeVersion '8.1.240.6' -Roles 'Mailbox' -ScanType 'PrecheckInstall' -SetupRoles 'AdminTools','Mailbox' -CreatePublicDB
    $true -TargetDir 'C:\Program Files\Microsoft\Exchange Server' -IISInstalled $true'  
    [5/31/2013 3:05:24 PM] [1] Beginning processing.
    [5/31/2013 3:05:27 PM] [1] [ERROR] The Exchange organization does not support this version of Exchange Server.
    [5/31/2013 3:05:27 PM] [1] Ending processing.
    [5/31/2013 3:05:40 PM] [0] End of Setup
    [5/31/2013 3:05:40 PM] [0] **********************************************
    Please suggest me how to install the exchange server 2007 SP1 on the domain that has exchange server 2010 sp1
    Thanks

    dear amit can u tell me I have one doming sg.com .I used for lab first I install in exchange server 2013 is normaly install and working fine .then I format my pc and agine  install exchange 2010
    Exchange organisation does not support this version of Exchange server
    warning
    setup is going to perepare the organization for exchange 2010 by using setup/ prepare AD . no exchange 2007 server roles have been deteted in this topology .
    please can u tell me the how install exchange 2010
    thanks

  • HT1338 I am trying to download adobe flash player on to my ipad2 i keep getting this massege that safari does not support this ?

    Hi
    anyone there
    I want to down load adobe flash player to my I pad but  a massage show up saying Safari does not support this ?
    Anyone there?

    No Flash for iPads, iPhones, or iPods
    Here's why there's is no Flash available for iDevices or other mobile devices. Adobe was unable to provide a product that was suitable to the needs of battery powered mobile devices used for Internet browsing. Existing Flash technology used too much memory, ate battery life, and was buggy. Simply put Flash did not work well on mobile devices.
    Apple's Steve Jobs led the escape from Flash dependency when Apple introduced the iPhone, and later introduced the iPad. There was a hue and cry over the omission. Time proved Jobs was right on target.
    So this is why there is no Flash for your iPhone or iPad or iPod nor for most SmartPhones. Flash has been abandoned by many sites in favor of supported technologies such as HTML5 or by providing their own custom app.
    Here is Steve Jobs official comment on his momentous decision to omit Flash from iDevices: Steve Jobs on Flash.
    Here is Adobe's later announcement to cease development of Flash for mobile devices: Adobe on Mobile Flash.
    Now, you are not necessarily out on a limb. There are some apps that can display some Flash, but don't count on there ability to display anything using Flash.
    Apps that can display some Flash from the Web:
    Puffin
    SkyFire
    Photon Flash
    Browse2Go
    iSwifter
    Also, note that many sites that use Flash provide their own app for accessing their material. So check with your favorite sites and find out if "there's an app for that."

  • Exchange 2007 New Install Error - Read only MultiValuedProperty does not support this operation

    Existing Server/Exchange 2003 environment. New 2003 R2 x64 server fully patched and updated with no other apps installed attempting to install Exchange 2007 SP2.
    Initially I was getting the error "Could not find the default Administrative Group ‘Exchange Administrative Group (FYDIBOHF23SPDLT)’". This I
    fixed by completely uninstalling per this Microsoft article,
    this Microsoft FixIt article and this recommended blog post, ending with
    setup.com /preparead. I'm making progress, because now I'm getting a new error attempting the install. Specifically, Hub Transport installation fails with "Read only MultiValuedProperty does not support this operation."
    Executing
    setup.com /prepareSchema fails. I've set the msExchVer attribute for CN=Offline Address Lists to 4535486012416 and gotten no change, the install still fails. This
    Googled page exactly describes my problem, and all anyone could say was to add this version number. It doesn't work. Pretty much none of the threads I've read have a resolution beyond this. I'm stumped, any help would be greatly appreciated.

    What's the error message when executing  setup.com /prepareSchema fails? failed at Organization Checks?
    Could you please check whether you are on the right schema version?

  • The platform does not support this application, but does under other account

    Okay the MSI Gaming App works just fine under my own account on my PC on which I am the administrator. So it isn't a driver related issue.
    Last week I created a second account for my son as he also like to play some games but I dont want him messing up my account.
    I wanted to start the MSI Gaming App on his account as my son was going to play a more graphic demanding game but the MSI Gaming App is only giving me the warning: the platform does not support this application.
    I checked the Security and Permissions for Authentication they all set like they should which works fine for other software and applications.
    Even when I try to run the app as administrator it keeps coming back with this warning.
    Anyone got clue why? Maybe I'm overlooking something obvious but till now I still didn't get the MSI Gaming App to run like it should. Some help please.

    Quote from: JLio01 on 11-December-14, 14:49:39
    1. What's your App version?
    2. What's the mobo/vga/specs of your son's pc?
    First of all thanks for the replies and future replies.
    1.
    Version 1.0.0.18
    2.
    My sons has his own profile/account on my pc so the hardware config and installed drivers are exact the same. And on my profile the App is working fine. So it has nothing to do with mobo/drivers/vga/specs. I already had installed the App before I created his own profile. As administrator I added all the needed permissions to the MSIGamingApp Properties Security Tab. Like I did with all other software he is running on his profile and which are working just fine. For example Teamspeak, Mumble, Several games, MSOffice and so on. I even set the Permissions to Full Control like on my Administrator profile. At the Permission Entry for MSIGamingApp I let the permissions be inherited from the parent object my administrator profile.
    If I would re-install and if during the installation windows would ask for whom the software should be accessible. I only would let Windows do exact the same as I did as administrator in the App Properties Security Tab. That the nice thing about being an admin. Create profile, set permissions and let users on your pc or network access software and applications already installed on the network. So that is why I find it weird this doesnt work.
    Also running the MSIGamingApp as Administrator on his profile gives the exact same warning.
    I do know how to add permissions to the security tab have been doing that several years for some job I had once.
    I could use Afterburner maybe but I don't trust him yet with making changes in Afterburner.
    The MSIGamingApp gives just enough controls OC-Gaming-Silent mode.
    And in case of trying a re-install of the App anyone got an url for a new version?
    Might have found it but it isn't on any MSI webpage.
    I did found something on Guru3D but I'm not aloud to post external links.
    Did found a url linking to a Torrent side but my Bullguard AV blocked this site instantly.
    So a clean url would be nice so to say.
    So weird I cant find this software on http://nl.msi.com/search/MSIGamingApp/product/1 or any other MSI site

  • Error: Driver does not support this function

    Hi there people!
    I'm a newbie in jsp and I encountered this error: Driver does not support this function. I'm using odbc:jdbc and access. Can someone please tell me what is wrong?
    <%@ page import = "java.sql.*" %>
    <%@ page import="java.io.*" %>
    <%@ page import="java.util.*" %>
    <HTML>
    <title>Stock Portfolio</title>
    <body>
    <body bgcolor="gray"><center>
    <table border = 1>
    <tr>
         <td><th>Symbol</td></th>
         <td><th>Type of Transaction</td></th>
         <td><th>Date</td></th>
         <td><th>Shares</td></th>
         <td><th>Price</td></th>
         <td><th>Stock Commission</td></th>
         <td><th>Stock Brocker Name</td></th>
    <tr>
    <%     String symbol = request.getParameter("symbol");
           String type = request.getParameter("type");
           String date = request.getParameter("date");
            String shares = request.getParameter("shares");
            int ishares = Integer.parseInt(shares);
            String price = request.getParameter("price");
            float fprice = Float.parseFloat(price);
            String commission = request.getParameter("commission");
            float fcommission = Float.parseFloat(commission);
            String bname = request.getParameter("bname");
    %>
    <% String url ="jdbc:odbc:Product";
       try
       { Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
         Connection con = DriverManager.getConnection(url,"","");
         String query = "INSERT INTO Stock (dbsymbol,dbtype,dbdate,dbshares,dbprice,dbcommission,dbname) VALUES (?,?,?,?,?,?,?)";
          PreparedStatement pstmt = con.prepareStatement(query);
          pstmt.setString(1,symbol);
           pstmt.setString(2,type);
           pstmt.setString(3,date);
           pstmt.setInt(4,ishares);
           pstmt.setDouble(5,fprice);
           pstmt.setDouble(6,fcommission);
           pstmt.setString(7,bname);
           pstmt.executeUpdate(query);
          }catch (Exception e)
           {System.out.println(e.getMessage());
    %>
    </body>
    </html>      Thanks!

    Sorry I need to hurry up. But here is link i found relating same problem. Please check this and see if it might help you.
    [http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526|http://forum.java.sun.com/thread.jspa?threadID=564872&messageID=2784526]
    Read reply #5.
    It says
    You're getting this exception because you're using the executeUpdate() method that returns a ResultSet. That's a JDBC 3.0 function, and the JDBC-ODBC bridge only supports JDBC 1.0.Good Luck.

  • When I click safari on my iMac it says my toolbar does not support this. What is the issue?

    My safari won't open. When I click it, the message says the toolbar does not support this. How can I fix safari?

    You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
    If the instructions don't work, proceed as follows.
    Triple-click the line below on this page to select it:
    ~/Library/Application Support/Conduit
    Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
    Go ▹ Go to Folder…
    Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
    Repeat with this line:
    /Applications/Toolbars
    Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
    /Library
    Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
    Application Support/Conduit
    InputManagers/CTLoader
    LaunchAgents/com.conduit.loader.agent.plist
    ScriptingAdditions/ct_scripting.osax
    Close the Finder windows you opened. Log out and log back in.
    I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

  • Apple hardware test does not support this machine, iMac 27" mid 2010

    Hi, I have a mid 2010 iMac 27inch with OSX Maverics updated to the very latest version.
    I need to hardware test my mac but I am finding it impossible. If I press D at bootup, nothing.
    Option D, loads hardware test, but it comes back saying:
    "Apple hardware test does not support this machine."
    I don't have the original install disk for the mac and it has been updated several times online to the latest version. What am I supposed to do in this instance?

    That Mac model requires the original system disk to run AHT. You can call Apple at 1-800-MYAPPLE, and ask for an operating system specialist. Then you can request replacement system disks for your computer. The cost us usually under US$20.
    Have your serial number at hand; it is required for the techs to find the correct disk set for your model.

  • R9 290 Gaming - MSIGamingApp: The platform does not support this application

    Hey guys,
    I have a MSI R9 290X Gaming 8G and can´t use the gaming app.
    Whenever I try to run the app, I get an error: The platform does not support this application
    So I guess I have the same problem as the dude in that thread:
    https://forum-en.msi.com/index.php?topic=179659.0
    He had the same issue with the R9 290X Gaming 4G. The problem was, someone flashed a sapphire vbios on his new card.
    So can someone check the attached vbios rom, whether it is the right one for my card and not also a sapphire rom or something else?
    Thanks and regards.

    I seem to have the same problem using the Live Update App itself. My card is MSI R9 270X Gaming and I use Windows 8.1 64bit.
    S/N: 602-V303-03SB1311026767

Maybe you are looking for