Finder more info dialog bug

More info in finder inspector window bug, it's not showing anything. but sometimes it's shows correct info.

XSemperIdem5 wrote:
When you select a document (whatever it may be) and click on "More Info" you can scroll down and see the section "Sharing & Permissions" How many (by default) should appear on the list that is shown below? There is the administrator and "Everyone". Is that it?
No, there are many, but it depends on the file you are looking at.
If you right-click, for example, Extensions.mkext in the System Library you will see listed
system
wheel
everyone.
These are special users and groups that are important for the proper running of BSD.
There are also
daemon
admin
staff
sys
procmod
and numerous others.
The GUI is like the wave on an ocean - most of the real stuff is hidden below the surface, but is very worth exploring. Over 90% of Leopard lies "under the hood."
Message was edited by: L.Rowan

Similar Messages

  • How do I find more info of images in iPhoto 11?

    I older versions of iPhoto, as I recall, when an image was open, there was file data including the filename and path for the file that was displayed in the lower left corner of the iPhoto window. Is there any way to get this type of information in iPhoto 11? I can get it in the thirs party software, iPhoto Library Manager, but I don't want to leave iPhoto, where I'm doing stuff with my images (editing) that I can't do in IPLM, just to see this data.

    The Devlin post that Old Toad references contains the following:
    "b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected."
    That's what I was looking for.
    My problem is that I have photos scattered all over my various hard drives. Some of this is due to legacy issues, combining several data bases of photos or folders of photos from various sources over many years and many Macs, and imports of photos from clients and others placed outside the standard locations as a means to keep them segregated. The result, after some years, is a mess. I'm trying to rationalize it all, edit out unwanted files, duplicates in the wrong place, etc. It is going to be a big task. This tip allows me to locate the file I'm viewing and note its provenance, then decide how to deal with it in relation to its similars, etc.
    Thanks to all who responded.

  • What is "swat" where can i find more info.

    Hi everyone,
    I hope this is the appropriate forum to post this, I need to find out about swat.ReturnCode and swat.cwa and the whole API. Any hint or resources would be very much appriciated.
    Thanks inadvance

    Sorry everyone, Please disregard my previous posting.

  • Where to find more info on the Communcation Scenarios ?

    Is there a wiki page / doc on the mentioned CS in the Configuration Guide ?
    Opportunity with Sales Order Pricing in ERP: Outbound
    Opportunity with Print Preview of Sales Documents in ERP: Outbound
    Sales Quote with Sales Order Processing in ERP for IDocs: Inbound and Outbound
    Sales Document Query in ERP: Outbound
    Product Replication with Sales Data from External System: Inbound
    Business Partner Replication from SAP ERP: Inbound
    Business Partner Replication to SAP ERP: Outbound
    I know the obvious ones like Business Parther Rep, but it starts getting overlapping when we talk about doing Quote Inquiry and Sales Quotes.  Is it the Opportunity with Sales Order pricing ?  Or the Sales Quote with Sales Order Processing ?
    In any case it would be good to find a summary or detail description of these, and any interdependencies.

    Hi Tim
    There is a spreadsheet on https://service.sap.com/cloud4customer that has the interfaces.  We are now adding other information, including the PI communication scenarios.   Hopefully it is available within the next couple of weeks.
    THanks
    Ginger

  • How to split workflow steps? Please find more info inside to answer

    Hi Frnds,
       We have a sequence of workflows. Which occur one after the other. Each WF is performed by a single agent except one WF. that particular WF needs to be split into 3 parts as 3 performers are there. I can do so by checking the description manually. But now we want to automate it. By splitting it we want to see the time lapse of each performer. Can someone help me out in this ?
    Please advice me if there is any table storing the wf steps numbers or anything which is relevant to this issue.
    Thanks in advance.
    Reddy

    Hi,
    i didn't exactly understand what u mean.
    You want to divide one single step into 3 step, is this right?
    In that case, you can subdivide it into three parallel steps in workflow definition or, if the three users have to perform their task in sequence, you can put a table with relevant users
    into the last tab of the task in SWDD.
    Workitem informations are stored in this tables
    SWWWIAGENT
    SWWWIDEADL
    SWWWIDH  
    SWWWIHEAD
    HTH
    Cheers
    Jens

  • Where can I find more info on Oracle error Messages?

    I once heard there is a online resourse for the errors.
    Thanks,
    Sam

    http://tahiti.oracle.com has all the Oracle documentation online, including the error reference.
    Justin
    Distributed Database Consulting, Inc.
    www.ddbcinc.com/askDDBC

  • Looking for More Info on Java Web Service

    Hi Everyone,
    Where can i find More info on Java web Service in BPEL? Is there any link or documentation for this? I looked at the tutorial and the only info available is:
    B.2.7 Java Web Service
    This service enables you to publish a Web service from a Java class. A wizard creates the WSDL document and deployment files needed to publish your code as a Web service. After you select the class and methods you want to publish, the wizard generates deployment descriptors, a JAX-RPC mapping file, and a WSDL document that can be deployed to an application server.
    Thank You,

    Sure,
    one way would be to upload the files to XE using the WebDav feature of the XML DB. You find more information here: http://daust.blogspot.com/2006/03/where-are-images-of-application.html
    Another option would be to configure a standalone Apache as a proxy server to XE. This way you can configure the Apache any way you like.
    HTTPS with Oracle XE ?
    Re: Existing http server
    For correctly logging the remote IP you will need the following workaround:
    Re: How to get X-Forwarded-For value?
    Regards,
    ~Dietmar.

  • How do I find out my keychain password? Need more info fast about this

    My computer started to get really slow, so I looked what I could do to make it faster again. After searching I found that the safari content was high and that I should delete it to make it less laggy and slow. Long story short I ended up deleting my saved passwords on safari...Looking into more info, I found out that I needed to get to Keychain Access. I got to Keychain access, found all the passwords.
    My question..
    •How do I get them out of Keychain?
    •If I end up needing my password for Keychain, how do I find that out? I have the like start up CD, but I dont remember ever making a password.
    •And if I do retreive my Keychain Password some how, will that delete everything stored in Keychain? I would have just tried it, but its a lot of passwords I CAN NOT lose...
    Please help :/
    Thanks!

    Never mind the screenshot.
    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Finder has suddenly restricted displaying "Preview" and "More info" info.

    Sup Mac Users,
    Well, a small problem has embezzled itself upon my Macintosh recently. When shuffling through my finder window and eventually ending up, say on a picture, the dimensions of the picture are not listed anymore in the preview info. As well, when previewing a movie in the finder, a Quicktime movie, the duration of the movie is no longer displayed?
    This info has just disappeared somehow. And when clicking on "more info..." under the previewed file in the finder (or when right-clicking the file anywhere on my computer), which brings up a separate window displaying much descriptive info., the pic dimensions are missing, and with movies, the duration is missing too. It was listed under "size" when getting info for both pics and movies.
    _What happened to this info???_ This info has been +incredibly useful+ info for just a quick glance at a file... but for some reason, when a pic or a movie is on my desktop, this exact info, duration or dimensions, is shown under the pic or movie on my desktop, and nothing else (but "show item info" is activated for the desktop).
    help please,
    Message was edited by: patzivota

    Hi patzivota, could just be a simple corruption in your "com.apple.finder.plist" file. You can drag this to the desktop and restart (you'll find it in Users/YourUserName/Library/Preferences) to see if this will solve your problem.
    If after restart all appears well just trash the old plist file.

  • Since one week my iphone, after synchronisation, gives me error message 13 objects could not get synchronized, look in itunes for more information. however, I dont find any info there

    since one week my iphone, after synchronisation, gives me error message "13 objects could not get synchronized, look in itunes for more information." however, I dont find any info there, neither on the mac I synch with nor on the iphone

    Launch Disk Utility in /Utilities. Then, click on the volumes under the top-level disk. The one that has this listed on the bottom is the boot volume.

  • Finder - "Get Info" - "More Info" panel has NO information any more!

    Hello all,
    Can you help a slider out? My new MacBook Pro has a problem with the Finder. When I use the Finder, File, Get Info (or Command I), to get info about a file, in particular, a graphic file, I used to see stuff in the "More Info" panel. I use the image size information (e.g., 512 x254 pixels and the actual memory size) to quickly keep track of graphics for my web pages.
    Well, for ALL file types now, I get NO "More Info" information in the panel. All the other panels, "General", Name & Extension", "Open with", "Preview" and "Ownership & Permissions" work fine.
    I fixed disk permissions via the Install DVD and deleted the com.apple.finder.plist and neither of these have helped resurrect my "More Info" information.
    I am running 10.4.10 and this is only on my machine. On the other 2 in our household, the panel works as it always has.
    HELP, I miss my "More Info" info!
    TIA,
    Dave
    [email protected]

    I am also encountering the same issue...in addition, I'm having trouble installing Google Sketchup Pro 6, I believe there may be some sort of correlation between the two?
    Any help?
    -j

  • HT1311 I have been using my apple TV successfully for 1 year.  Today there was a message telling me I cannot sign in because the terms and conditions have changed.  Please go to apple support for more info.  However, I cannot find any info.  What do I do

    I have been using my apple TV successfully for 1 year.  Today there was a message telling me I cannot sign in because the terms and conditions have changed.  Please go to apple support for more info.  However, I cannot find any info.  What do I do next.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • Is there a way to place a button on the front panel that when clicked gives a pop up dialog box with more info in it?

    Hi Everyone,
     The simulations that I am creating are very simple themselves but are intended for use in a classroom setting to help students learn more about the theory being demonstrated.  I am hoping to be able to place a "Help" or "more info" button on the front panel so that if a student wants more info about the theory they can click on it and a pop up appears with background info on it.  It should also have a second button to close it and return to the main front panel again.  Can anyone lead me in the right direction?
    Thank you!
    Solved!
    Go to Solution.

    Use an event structure on the main vi that when the button is clicked, launches a "Help" sub vi. Inside the sub vi (with the properties set to load front panel when called of course), use another event structure to wait for the button of the subVI to be clicked so you can return to the main VI. Do you need help with using event structures?
    Charles
    Charles Chickering
    Architecture is art with rules.
    ...and the rules are more like guidelines

  • File Info Dialog problem

    Hi,
    Not sure if this is a bug or if I'm just missing a setting someplace.
    Problem: I write a lengthy caption in the "Description" window of the File Info dialog. Later on I want to use that same caption on a different image.
    Using CS3 on Windows I can click on the flyout arrow next to the "Description" window and input the entire caption.
    Using CS3 on Mac, the flyout will only input sections of the caption. It seems like the Mac version breaks the caption apart based on any punctuation that is in the caption.
    Ex. If my caption is "01 July 2008, Los Angeles, California, USA - Paul has issues with Photoshop, causing a problem when captioning files."
    Windows puts the entire caption in the field. Mac breaks it down like this:
    01 July 2008
    Los Angeles
    California
    USA
    Paul has issues with Photoshop
    causing a problem when captioning files
    I don't recall this being an issue with PS7 or CS1. Am I missing something or is this just the way CS3 works?
    Thanks in advance for any help!
    -Paul

    I narrowed down the issue even more. Non-English languages have their strings, tags, and texts stored in a file named strings.txt in a language-specific subdirectory in the Resources directory in the Adobe Bridge CS6 program folder. The strings.txt file includes, among many other things, a language-specific decimal separator character—which in English is a dot but in many non-English languages is a comma.
    When I replace the comma as the decimal separator in the German-language strings.txt file by a dot then all of sudden the f-stops are displayed correctly in the thumbnail pane ... well, except that e. g. "f/2,8" now gets displayed as "f/2.8" which in German is wrong but acceptable—and definitely much better than "f/2,0" which is unacceptably wrong when the actual value is 2.8.
    The idea to try this dawned on me when I noticed that in some places in the metadata pane, decimal numbers are displayed with a comma (respecting the decimal separator character given in strings.txt); in other places, they're displayed with a decimal point (ignoring strings.txt). Those using a dot are correct; those using a comma are wrong. So there's two bugs in Bridge rather than just one. First bug: In some places, the language-specific decimal separator character is ignored. Second bug: When it is not ignored then the number displayed will be wrong.
    So my workaround now is to use a dot as the decimal separator character rather than a comma.

  • How to edit the find-and-replace dialog in Dreamweaver 8

    For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
    However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
    I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
    I read in the help at 'Customizing the appearance of dialog boxes' at point 4
    On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
    I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
    how to edit the find-and-replace dialog in Dreamweaver 8?

    It's looks less like an image and more like a form drop list to me.
    Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
    I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

Maybe you are looking for