Finder not launching after using Docker

Hey there, this morning i made a really stupid move, I was looking for ways to customise my dock, then I found docker, after playing around with the settings for a bit, I kept getting error messages saying 'Finder Quit unexpectidly' each time i close it, it just repeats and wont go awa
How can I fix it?

I can confirm this issue. I've upgraded from 10.7.5 and Docker was installed and functional in that version.
After Mavericks installation, Docker was still functional and so was finder, but after trying to change the settings in Docker, Finder started crashing. Some settings changes in Docker weren't saved / applied so the next step was to check the disk for permission problems. The disk utility found some issues in Finder's paths. I've tried resetting Docker to defaults and removing / re-installing it, but the problem with Finder persisted.
IMHO, this is a bug overlook by Apple devs. Its Finder stability and settings affected here, don't ask me why.
Can anyone suggest a better way to workaround this issue? (as I've already uninstalled Docker while not in safe mode and now have nothing left to uninstall). Also, OP, did that method work for you?
Thanks,
ASP

Similar Messages

Apps not launching after using Firewire drive on a different ibook.

Hello. I purchased a used ibook running system 9.2 and used my firewire drive from my original ibook ( OS 10.3.9) as a startup disk. It mounted the drive and operated but Safari and Mail were un able to make an internet connection. Mail needed a Force Quit to be able to Shutdown. The firewire drive is the only drive used with the original ibook and contains the OS and applications. Since then several but not all applications will not launch on my original ibook. Safari crashes then launches. Mail launches but will not work. Incidentally, I do not have any s OS 9 files on my original ibook. I have repaired permissions. Terminal, in a window titled "Terminal-Bash-80x24 posts: Last login: Sun Aug 27 09:52:10 on ttyp1
Welcome to Darwin!
susan jordan?s Computer:~ johncozart$ (Susan Jordan was the new ibooks original owner.) Any help is greatly appreciated. Thanks.

Hi John, welcome to Apple Discussions
One possible fix, clear your System and Kernel Caches on the firewire drive. You can do this using a Utility such as Onyx - Panther version. Restart.
If that doesn't help, since your problem is OS X related, the Mac OS X v10.3 & earlier forum would be a better place to post your problem.
iMac G5 Rev C 20" 2.5gb RAM 250 gb HD/iBook G4 1.33 ghz 1.5gb RAM 40 gb HD Mac OS X (10.4.7) LaCie 160gb d2 HD Canon i960 printer

ITunes will not launch after upgrade--click, bounce bounce, nada

iTunes will not launch after upgrade--rebooted nothing--2 bounce icon
then shut down all and unplugged, restarted--no change, iTunes still will not launch after upgrade
iTunes current version
on imac w/10.6.8

I have the same issue.
Allready uninstalled iTunes and reinstalled it, but the same problem occurs.
Icon keeps bouncing, and all that's visible is the first menu-item in the top menu bar, named iTunes. Nothing is clickable though.
The iPhone Configuration Utility doesn't seem to work either, it crashes on uploading an app to my iPhone. I guess it's using some of iTunes' libs or something.
Does anyone know how to get iTunes working again? I'm getting pretty desperate over here...
Thanks!

GarageBand is not launching after upgrading

GarageBand is not launching after upgrading to OS 10.8.4
How to fix it?
Thank you.

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Alternatively, see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Mail not launching after font update

Mail will not launch after recent font update, how can I reinstall Mail or repair it?

Have you tried repairing permissions? Are you using a font activation program? If so maybe try turning fonts off in groups until you can get mail to launch and try to narrow it down to a bad/corrupt font?

Overhead calculation not happening after using Overhead key and orgin group

overhead calculation not happening after using Overhead key and orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

Overhead calculation not happening after using orgin group.

overhead calculation not happening after using orgin group.
There was a runtime error earlier related to u201Cdefine credit u201C IMG node under costing sheet component and we have applied SAP note 769946 and that error was gone out of the way
We want to apply/add Overhead to SFG/FG materials.
We are using PP order with PCC(product cost collector) as the cost object , i.e costing by period.(system ECC 6)
But our problem is with material standard cost estimate process.
We have assigned overhead keys to the percentage rates in costing sheet for material standard costing and assigned the origin groups to the credits of costing sheet. But after running the cost estimate overhead is not taking into account for standard cost calculation.
In the define credit entry table key field is valid to date strangly and actually system should allow one than one entry with same valid to date and same sec.Cost element(type-41) for different cost centers.
But if we without using overhead key and origin group, the entire cost in that supporting cost center will come to all materials (SFG/FG) and we can not distinguish between different product materials(SFG /FG).
We have checked all things as mentined below.
Firstly that the correct costing sheet is assigned to the valuation
variant.
That the costing sheet is entered for the appropriate material type:
Finished and semi finished or material components.
All of the above can be checked and verified via transaction OKKN.
In addition make sure that the base value maintained is present in the
costing, for example the base may include an Origin group, is that
origin group part of the materials being costed?
Similarly if the base is found and values exist how is the overhead
rate of the costing sheet set up, is it valid etc.
And finally do a similar check for the credit.
we doubt this as a programm error...
So, request all experts to have ur feedback..

Dear,
Check your origin group & material unit of mesaurement is same.
some time in costing sheet origin group is maintain in different unit & for materail it's maitain in other unit of mesaurement.
You can see unit of measure for material in Additional data - unit of measure.
Check BOM component material unit also.
Check same unit of measure is maintain in KZS2
I hope above will useful.
GOPAN

TS1717 My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

My Itunes will not launch after downloading and I have tried all the troubleshooting for itunes for Windows 7 64-bit. Do I need to system reboot my computer than try to download it again?

I'm having a very similar issue, paired with iTunes not being able to get online.
iTunes shows up in processes and then hangs at 17,000 K or so -- sometimes it will start up, but that (if it occurs) is a delay of literal hours.
Pretty meticulously went through all the 'cannot connect' trouble shooting, and have uninstalled, restarted, and then reinstalled every piece of apple software; issue is just as firm. Starting in safe mode or admin mode don't fix it; signing in as a different user doesn't fix it.

Hello, my iphoto on my mac OS X Version 10.5.8 will not launch after talking with an apple support tech. She had me sinc my iphone to my mac desktop and my photos downloaded from my iphone and were at the bottom. Now the iphoto will not launch.

My iphoto app will not launch after talking with an apple tech support who had me sync my iphone 4S with my mac desktop. The pictures downloaded from my iphone and after disconnecting from the Apple help, my iphoto had disappeared from the very bottom of the screen and will not launch. Can you help me retrieve my pictures. They are still on the computer.

Any help here:
http://support.apple.com/kb/HT2638?viewlocale=en_US&locale=en_US

Photoshop CS4 will not launch after installing Yosemite.

Photoshop CS4 will not launch after installing Yosemite. All the other CS4 apps open. I upgraded Java. Genius Bar could not get it to launch.

Here's the fix I found, by way of an explanation...
Snow Leopard prompted me on my first startup with the following error:
"There is a conflict with the _______ font file. This font file contains a font name that conflicts with a system font required by Mac OS X to display onscreen text. You should move this font file to the Trash."
The fonts it said were conflicting: Helvetica, HelveticaNeue.dfont, Lucida Grande, and Monaco. I figured Snow Leopard probably wanted to replace these fonts with newer versions, and so I clicked "Move to Trash" on all four.
Apparently 10.6 trashed these fonts but didn't replace them. This was causing Photoshop to crash on load.
So I restored my ~/Library/Fonts folder from a backup made just before upgrading and this time after a reboot I said "Allow Conflict" on all four dialog boxes and launched Photoshop... everything is back to normal!
Not sure what kind of "conflict" it's referring to, but apparently moving these font files to the trash as OS X prompted me to do broke a number of apps. Should I report this as a bug?
Thanks for the ideas!

Fireworks cs4 will not launch after accepting license agreement

fireworks cs4 will not launch after accepting license agreement

<user_name> = Your User Name:
in XP:
Application Data Path:
C:\Documents and Settings \<user_name>\Local Settings\Application Data
Fireworks CS4 Preference Folder Path:
C:\Documents and Settings \<user_name>\Local Settings\Application Data\Adobe\Fireworks CS4
Delete the Preference folder and re-launch FW.
Note: They are hidden folders, you need to uncheck the 'Show Hidden Files' and "Hide System Protected File" in Folder Options > View.
-- Sag-e-Attar Junaid Atari

Lync mobile app will not launch after upgrade to lollipop on HTC One (M8)

Lync mobile app will not launch after upgrade to lollipop on HTC One (M8). Is this a known issue or is a fix available?

Hi THGutz,
Did you install the latest version of Lync for Android ?
The current version of Lync for Android is
5.5.3.8935.
I don’t test it on M8, but on other Android 5.0 devices it works fine.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

battery is not charged after using all of my battery. what's wrong? is it about charge machine or my computer?

battery is not charged after using all of my battery.
Of course it isn't — you've just drained it. Plug your AC adapter in and charge it up again.

Thumbnails do not display after using rebuild tool

I am using OSX 10.7.5, and iPhoto 8.1.2.
recently I made a back up copy of my files.
I then reinstalled my operating system.
I then copied my iphoto library back onto my computer.
imported my iPhoto library into iPhoto
Pictures are in iPhoto.
Thumbnails do not display.
I have used the rebuild tools provided by iPhoto.
Still no thumbnails displaying.
any other ideas?

It relates to your suggestion in that, the reason I posted was to solve a thumbnail issue.
"re: Thumbnails do not display after using rebuild tool"
Terence suggested reloading my back up library.
I asked Terence where I should import to.
I was thinking that my thumbnail issue was related to the way I imported my back up.
You clarified where to import the library...
I tried it and I still have no thumbnails
I have already tried repairing permissions and rebuilding thumbnails using the i photo repair tool.
can you help me?

Aperture (2.1.2) will not launch after 10.5.6 installed

Quite possibly this problem happened because of something else I did. However I just now noticed today that Aperture will not launch after I installed 10.5.6 last week. This is the first time I tried Aperture since I updated.
Help! This is VERY important to me as I do all of my photo ediing these days with Aperture. I have a couple of thosand photos waiting .
Is it possible to download a new copy of Aperture? Yes, I am a registered owner and first paid the full $300 for this app.
Any and all help most appreciated.
Ken

Ken
try going through the application maintenance steps. You mentioned that you ran repair permissions prior to installation, this needs to be run AFTER any application install. As it could be any number of things causing the issue I have listed in sequence some steps to take for trouble shooting/maintenance.
1. Repair permissions on system drive and drive with application on it.
2. Verify and repair the disk with the library on it. If on your system disk run verify to see if it needs repair.
3. Remove the application preferences found here:
system disk/users/users/library/preferences/com.apple.Aperture.plist
•test application
4. CMD+OPT when clicking on the Aperture icon to launch it and choose consistency check
•test application
5. CMD+OPT and choose rebuild library
•test application
6. Remove any installed plug-ins from following directories
system disk/users/users/library/application support/aperture/plugins/
system disk/library/application support/aperture/plugins/
•test application
7. Hold the Option key down and launch Aperture and see if you get the option to create new library or choose library, try both of these steps.
Tony

Finder not launching after using Docker

Similar Messages

Maybe you are looking for