Finder not showing camera, Image Grab sees it

Hey,
I have a Canon EOS 400D, but when I plug it in via USB it fails to show up in Finder.
I can grab the images from the camera using Image Grab, so OS X definitely sees it -- just for some reason, it's not showing up on the Desktop or in the Finder sidebar, as other cameras (or flash disks, iPods, etc) do.
Any thing I can do to make it show up?
Thanks!
--Public.

I don't know about that model specifically, but for a camera to appear in the "Finder", it must be able to function as a "mass storage" device. I get the impression that many Canon cameras do not support this mode...

Similar Messages

Finder Not Showing Thumbnail Images anymore

Finder has stopped showing thumbnails of all images, in thumbnail view. Just the generic jpg thumbnail appears. Checked view settings, they are fine. Happens in every folder and on external drives.

Just like Windows!! Restart fixed it!! Gong!

Upon launch of Lightroom after initial instalation a warning came up that said lightroom needs to create temporary files and cant open. The it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Upon launch of Lightroom after initial installation a warning came up that said lightroom needs to create temporary files and cant open. Then it opened and the catalog i imported will not show the images. How can I give permission? Running windows 8.1 64 bit. I have avast virus software.

Crystal HTML viewer will not show embedded image from Infoview image store

I am having an issue with the html and dhtml viewers not showing an image I have embedded inside a crystal report. The image has been stored in infoview and embedded into the report from that source. Using the Crystal ActiveX viewer works fine in this case and shows the image. The html viewers however show the blank box with the red X in the top left corner when Internet explorer can't find an image.
Now, if I right click on the image and get it's properties I get this URL:
http://vsx2af0x/crystalreportviewers115/imagehandlerdotnetbridge.aspx?dynamicimage={B8FDE586-08D3-4A14-896C-0FE19AC3DB90}.png
If I take that url and try to load it directly through Internet explorer I get the following error:
Exception of type 'System.OutOfMemoryException' was thrown.
The file is small and only about 20k in size. If someone can help that would be greatly appreciated.
Thanks

Unfortunately I have been unable to remove the plug-in. The files is not locked, or shared, but my operating systems thinks it is.
What happens, when you try?
When I try to delete the plug-in from
/Library/Application Support/Aperture/Plug-Ins/Google/Analog Efex Pro/
with ⌘⌫, I simply get the pop-up panel to enter my administrator password, and the plug-in will be moved to the Trash:
Don't forget to quit Aperture, before trying to remove the plug-in and to log off and on.

Mavericks Maps App not showing any images?

My Maps App on the new Mavericks OS is not showing any images.
Can anybody help me ?

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash.
Log out and log back in. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. Otherwise, post your results.

Photoshop problem (not showing the image)

hy,
i just installed photoshop on my new laptop and it does not show any images when i open them.
like you can see in teh image that i posted i have a picture opened (its also so in a layer)
i can use photoshop but i dont see anyting changing in the normal area( is does change in the layer box.)
i tried with different pictures
pleas help

Chris Cox wrote:
And my money would be on a video card driver that needs to be updated. Disabling OpenGL drawing should avoid the issue temporarily, but the bug is in the video card driver. (we've seen this a lot with older drivers)
where can i find the disabling OpenGL Drawing?
i have a NVIDIA GeForce GT 540M
My money is on your document window being off screen.
At some point you may have had a secondary monitor attached which you have since disconnected, or you drastically changed your monitor resolution.
Trashing your preferences should fix it instantly:
To re-create the preferences files for Photoshop, start the application while holding down Ctrl+Alt+Shift (Windows) or Command+Option+Shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop Settings file?"
i tried this but i did not work. (however i do work with diferent screens)
thanks already for you efforts

Mavericks 10.9.1-Problem with finder not showing peripheral hardware

After upgrading to Mavericks (10.9.1) my Finder doesn't show new hardware in Devices. For example, Finder not showing iPod when i plug into the keyboard's usb. i have other examples of the same problem, such as trying to find a hard drive detached from an old computer. anyone know if i can configure Finder to show all peripheral (hardware) devices? maybe i need to plug the peripherals into back of the iMac rather thatn into my keyboard usb (which i have not tried.) Thanks in advance.
Charlie

I had a similar issue as you did -- for a few weeks now I've been suffering through agonizingly slow Contacts performance.
The way I resolved it was:
1) Quit Contacts
2) Go to system preferences and go into iCloud, then uncheck contacts -- choosing to delete from mac.
3) Go into system preferences and to Internet Accounts and again uncheck contacts under any of the accounts it's enabled on (gmail, yahoo, etc).
4) Go to your user's library folder (easiest way is to open a finder window, hold down the option key on the keyboard and from the Go menu, select Library).
5) Delete anything referring to Address book or com.apple.address book....   -- check these folders in particular:
     - Address Book
     - Application Support
     - Caches
     - Preferences
6) Restart your computer
7) Go back into System preferences and enable contacts from wherever you want (iCloud, etc.)
8) If it's not quite enabling (appears to enable, but checkbox doesn't show), then do one more restart of the computer.
9) Now open Contacts and allow it to sync

Photos 1.0 not showing all images from Photos Library.photoslibrary folder/file after update install

I installed the update that changed my iPhoto to Photos 1.0, and the new Photos program is not showing all images from Photos Library.photoslibrary file/folder (not sure to call it file or folder since it is actually a folder with all my pics but it acts more like a file) after update install. The Photos Library.photoslibrary file/folder shows to be 55 gb in size, and it shows to be loaded into the photos program, but there are maybe a few weeks of pictures showing instead of a few years. Lots of pictures in the 55 gb are not showing for some reason.

No - iPhotos has not replaced anything - it is new and an addition - iPhoto is still on your system in the applications folder and still works just fine
Outlook is not supported by Photos - not sure if the support must come form Apple or MS as Photos uses a different interface to external packages than iphoto did
LN

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image...

Trying to add 2 slideshows to one page, how can I make a slideshow so it does not show an image until they click on the thumbnail?

You can do this with "composition" widgets.

Finder Not showing Sidebar

In my finder not showing sidebar.
I have checked finder preferences etc..

Finder menu > View > Show Sidebar.
Does that help?
Sometimes I have to select it twice to get it to appear (Finder likes to ignore simple requests with no explanation ).
You may also be able to drag from the left edge to make it appear too, but that can also be hit or miss.

Rendered html pages in results file(html) not showing the images of origina

hi,
rendered html pages in results file(html) not showing the images of original page
when i click on rendered html pages of different html section of a results file.
both master and tested as well.
thx
pasumarthi

By design, the report will not show the images, will not apply imported css or javascript files and will not show framesets. Also, in the case that an image is shown there is no guarantee that that was the image that was seen when recording/playback the script.
The rendered html pages that are shown in the report only contains the structure of the html page. If an image is shown the image will be a reference to the location of the image and not a saved copy of the image as part of the report. If the website has a simple structure this can give an idea of what was different. If the website relies extensively on images, stylesheets or javascript to present the information then this report feature becomes less useful.
Few weeks ago I requested a feature request in order to be able to see in the report the page exactly as it was when recording the script and exactly as it was when the script was played back. In the way that the feature request was written it specifies the use of screen captures or saving the page as a pdf file.
Regards,
Zuriel

Either automatic or manual clone clustering not showing DAM images

Hi all,
I have 2 servers with CQ 5.4 and CRX 2.2, repository size around 8gb:
Server 1
Author :4502 (master)
Publish : 4503
Server 2
*Clustered Publish : 4503 (slave) not showing DAM images.
* I have tried both automatic clustering (the easier one from the CRX-GUI), and manual clone (cp crx-quickstart -> removed cluster_node.id and edited cluster.properties)
Why is this happenning?, How can I solve it?
When I browsed the content of Server 2- clustered publish 4503:crx/index.jsp after the manual clone, the dam assets were already there. Also the size of crx-quickstart folders for author master and publish slave were the same.
Right now I have running the automatic clustered publish instance 16 hours so far, is showing the pages except DAM images. If I go to CRX/index.jsp it says 503 Internal Server Error.
Thanks for reading, and will appreciate any help.
Regards.

Hi,
I waited until the synchronising process finished as per the logs, however still the images from DAM are not showing in the clustered slave. If I right click to see any image I got:
Not Found
The requested URL /etc/designs/geometrixx/_jcr_content/page/logo.img.png/1282235023667.png was not found on this server.
This only happens in the slave instance.
I can add that when I run the master I got this message:
$> ./start
22.10.2012 15:36:53 *INFO * Using JVM found at /usr/java/jdk1.6.0_18/bin/java
/opt/apps/cq5/author/crx-quickstart/server/serverctl: line 251: ulimit: open files: cannot modify limit: Operation not permitted
22.10.2012 15:36:53 *INFO * Starting in background...
22.10.2012 15:36:53 *INFO * Started.
Is there something else that I should look for?
Thanks for reading.

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

I have backed my Mac Book pro up to my external hard drive using time machine. My iPhoto now does not show any images, even when I upload from my iPhone

Mac 101: File Sharing
Mac OS X 10.7 Help: Transfer files between two Mac computers
Mac OS X 10.7 Help: Set up a Windows computer to share files with Mac users
Mac OS X 10.7 Help: Use iDisk to share files
Mac OS X: Sharing your files with non-Apple computers
How to share a Mac's files with a PC and vice versa.

2 issues in LI2, slowing and freezing during developing, slideshow not showing all images.

1. Lightroom Is slowing down during normal development.
I only have 3500 photos in this catalog and am working on 50 to 200 photo in Raw format at a time,
When Opening and beginning a project the program worked fine but after a few hours of adjustments the program slows and then freezes for minutes at a time forcing me to shut down the computer and restart. I have a 1.5 TB hard drive and have moved the bulk of my files to a backup drive freeing up the MAJORITY of the hard drive for processing. I have been threw the 8 ways to speed up Lightroom and an finding the problem persisting. IDEA'S?
2. LI's Slideshow is not consistent in showing all the images.
after going through the slideshow's setting and playing the slideshow, LI will show some photos and not others and start over at random order. Idea's?

Images that are edited in Photoshop will be displayed automatically in Lr only when the image-file saved in Photoshop is the same as the one opened from Lr.
You say you open a JPG from Lr, then edit it in PS by - among other things - adding some layers. Layers are not supported in the JPG-format so you have to either save it as a psd or as a jpg-copy.
In either case this is not the same image file as the one opened in Lr, so it will have to be imported into Lr to show up. If you would flatten your image after editing in PS and then do a <save> to your JPG - not a <save as> - it will show up in Lr.
PS: the only exception is when you open a Raw image from Lr in PS and you save it in PS in the file format specified in Lr for external editing. The saved file will automatically show in LR.
Message was edited by: web-weaver; PS added

Mail not showing embedded images

This problem has been bugging me for a while.
I am getting some emails (from my company communications) that are incorrectly formatted by Mail. I see big boxes labeled "Missing Plug-in". The rest of the text is there, but those big boxes make the mail hard to read.
So today I decided to look a bit deeper into the problem. I brought it down to the presence of image tags that call for embedded images (included as attachments) using the "cid:" protocol. For example:
<img src="cid:[email protected]" alt="Find" border="0">
Is this a restriction in mail (I am running mail 6.1 on Mountain Lion). Or is there some config parameter I need to tweek to enable support for embedded images ?
Thunderbird has no problem. I also did a quick check with Google Mail and Yahoo Mail, and neither show the images. But they just show nothing, so the resulting email is still readable. Mac OSX Mail shows big boxes with the "Missing Plug-in" note. I would be happy if Mail just ignored the images.
I should point out that mail on iPhone and iPad work fine (they display the images).
Albert

Try this - worked for me...
https://discussions.apple.com/message/20652845#20652845
If that doesn't link properly, here's the original solution, cut and pasted:
"MailPluginFix"
From the Code2K:Labs site: http://code2k.net/products/mailpluginfix/
From MacUpdate: http://www.macupdate.com/app/mac/37804/mailpluginfix
Just download the fix and double-click it - next time you open mail, you'll see your attachments.

Finder not showing camera, Image Grab sees it

Similar Messages

Maybe you are looking for