Finder not working AFFECTING LOGIC 9

I have a large sample library for Logic 9.....
When I load some of it up in Logic 9 it says that the samples are missing....
When i search for them in finder it says they are not there...But when I go to the directory on the hard drive they are ????????
Any thoughts

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

Similar Messages

Finder not working, when click the infinity sigh comes, can't open any file

finder not working, when click the infinity sigh comes, can't open any file?

That could be an indication your drive is failing. If you do not have a current Backup, that is top priority.

Antares autotune 4 graphic mode does not work in Logic

Has anyone found a workaround for the following issue:
Using Antares autotune 4 or 5 in Logic pro 8, I cannot use the graphical mode how it was intended. Using Cubase, I was able to launch the plugin, switch to graphic mode, and track the pitch vs time. This was useful to manually correct the pitch for each syllable. For some reason, this function does not work in Logic Pro 8. Any thoughts as to why? Am I doing something wrong? Please advise.

I haven't used AT in years, but I do still have AT 4.
Graphic mode works just fine here in Logic 8, and I'm still on Tiger as well, albeit 10.4.11
Not that you asked, but seriously, look into Melodyne. AT is so archaic as far as it's graphic mode is concerned. 30 seconds back with it and I can't seriously see why anyone would use that plug-in, other than maybe manual mode, for a quick "run a comb through it" fix.
Sorry I couldn't give you an answer as to why this is happening. have you contacted Antares?

TS4628 onscreen keyboard does not work in logic pro x

onscreen keyboard has stopped working in logic pro x - latest version.
There is no indication of midi in or out on control bar when keys pressed.
also, certain keys do register do not trigger from outboard keyboard instrument.
when playing back tracks, the relevant keys auto depress on the onscreen keypad.
audio output is fine on the system. all keys on piano roll keyboard work fine.
The onscreen keyboard works fine in garageband
have reset all midi assignments in prefs.
have reinstalled the program but the issue remains
silvejon

You have either installed a midi controller that is over riding things or you are running an iOS App that is interfering....
Turn off all iOS devices to test for iOS App
Delete CS prefs to test for conflicting Midi Controller issues...
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove ~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.

Finder not working... I'm getting annoyed at Apple.

Hi. Long time Apple Fan, 5 years now, heavy computer user for 15 years.
I recently installed a Brother Fax/Scan/Copy machine on my iMac with Leopard. The software that comes with it gives me the option to scan into PDF in one small step. Easy. I love it. However, the software is weak in that it doesn't clearly show where the pdf's are by default saved. I've solved that problem for the Black and White scans, but for the color scans, because I do them so rarely, I've not taken the time to figure it out.
So last night, I was scanning my Passport because I'm getting a new one soon. In the process, every time a scan completes, it opens the file in preview with the .pdf file and the default file-naming convention of CCI00001.pdf, CCI00002.pdf, and so on sequentially. Well, thinking I could easily find the files later, I just closed the Preview window thinking I'd open them later.
Well, the only way I can find these files is under the 'File>Open Recent' in Preview. Problem is, I've opened a few files with Preview since these scans, so I think, I'll just go to finder and type in the file name. Well, Finder can't find them. The ONLY way I can get to the files is through 'Open Recent' in Preview. However, some of them are no longer recent, so 'poof' they've disappeared. So I thought, well, let me click 'save as' in Preview and that would open the folder they are in. Well, it did, but it opened it in a finder window that is not the usual finder window. I.e., I can't navigate away from the folder that the 'Save as' function in Preview opens. Well, I can, but it doesn't clearly show me where that folder is that it default opened. I use the drop down arrow to open the 'advanced' finder window or whatever, but there is no 'root structure' (for lack of a better comparison that you can find in Windows) the name of the folder happens to coincide with my 'user' folder, but it doesn't have the little 'user' icon that you normally see next to your user folder in finder. It's just a normal blue folder that happens to have the same name as my user folder. So, I thought, why don't I create a new folder with a peculiar name that I can search for in finder- I called it 'Baffle Me' ... keep in mind, this is within Preview, File>Save As...> not changing the directory that it defaults to even though it's the name of my home folder or whatever, and then adding a folder called 'Baffle Me'... I saved in that folder. Logic would conclude that I could do a search within Finder now for a folder called 'Baffle Me' and wala- I'd find the folder where all my .PDF scans are. Nada. I thought, well maybe OSX needs to take time to scan it again- I'll come back tomorrow. So I did. Nada. I'm at a lost here. How can a file be on my computer and Finder not find it??
Can someone tell me how to find these scans? Did they get thrown out because I just closed the Preview window instead of saving them and they were in some sort of 'temp' directory? That doesn't make sense though, because I can still go back in 'File>Open Recent...> in Preview and find them. I'm at a loss here, and I'm really getting annoyed.
Ideas? Thanks in advance for your responses.
Hal

{quote}Well, the only way I can find these files is under the 'File>Open Recent' in Preview.{quote}
Command click on the filename on the preview window and it will give you the path to the file... That is also a live path, so if you click on the folder that the file is in you will be taken to where the file is. Or click on the Sidebar button on the preview window and click on the gear/wheel on the bottom and select sort by path. It will then show the path under the file name...
You should also play with spotlight to see if you can figure out why it was not working for you. I was able to find pdf's by name as well as text within them... It should've found them really easy with the file names.
{quote} I use the drop down arrow to open the 'advanced' finder window or whatever, but there is no 'root structure' (for lack of a better comparison that you can find in Windows){quote}
Click on the hard drive icon in the sidebar and you see the 'root structure'. The mac layout is no different than Windows...
Message was edited by: garbageman

Finder not working well-show folders empty

Hi,
for some times now I have problems with finder.
First I thought it was a problem accessing the network but I also have the problem with the local folders!!
After logging to my account, it works well for some times and then suddenly (may be after accessing machine on my network - Synology NAS) finder begin to show all folders as they are empty!!!
The funny thing is that if for instance I do a "file/open" within an app or do an attachment and so access a "windows like finder" it works!!
But if I use the finder ... folders are empty (shown as ...).
The only thing to get everything back is to restart the computer (and many times I have to hard stop the machine as the finder is not working anymore and my mac mini don't want to restart. I keep the desktop background and nothing happened!!
The strange thing is that it seems I don't have the problem on my MacBook Pro!!
The mac mini was a clean install!
So many problem with Yosemite!!!
Ragards

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx ' ' 879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */ /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|NVDA$|pagin|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

GPO and RA plug-ins not working in Logic Pro 8.0.2

I have installed RA and GPO on my Mac Book Pro. When I open Logic Pro they are not appearing in the Plug-in list. Kontakt 2 is but won't let me load individual instruments for GPO. The strange thing is I also have a copy of Logic Express and both RA and GPO work fine here (even though they don't pass the AU validation). They also work as stand alones fine. In Logic Pro, RA and GPO do not appear in the AU validation list. Can anyone help? I have all the latest updates as far as I am aware. It's very annoying!

There's no Auval or RA or Garritan Personal Orchestra in the Audio Units Manager in Logic Pro. Though Stylus RMX that I also use and Kontakt Player 2 are there and successfully validated. The RA and Kontakt Player component are exactly in the place you said they would be.
I've since discovered that RA does not in fact work in Logic Express. As for whether it's loading up in Rosetta or PPC version - how do I tell that?
I really appreciate your help but I'm still stuck at square 1. Any more suggestions?!!

Reason rewire not working with Logic 9.1.8,Help!

I need help on Rewiring Reason 6.5.3 with Logic 9.1.8
I've done everything that's been told how to rewire Reason and Logic (tutorials on youtube / on the Propellerhead website) I had no problem with it before 6.5 / 6.5.1
But after I updated to 6.5.3.I just cant get rewire working. When I click Reason after I open Logic. The Logic library is empty. I do have automap 4 as well. I'm not sure if that's the problem.
I even checked Reason's Option>Sync. Rewire is not able to be selected and the rewire light on the hardware interface is never on.
I've tried uninstall reinstall from 6.5 ,but still not working.....
Can someone help.....This is suppose to be easy.....Thanks!
2 x 3.2 GHz Quad-Core Intel Xeon 8 GB 800 MHzDDR2 FB-DIMM

http://documentation.apple.com/en/logicpro/usermanual/index.html#chapter=10%26se ction=11%26tasks=true
See if the above link helps

"Find" Not Working in Adobe Reader X

I Installed ARX on a Win7/64 machine a few months ago...it seems to work fine. But today I tried to use the "find" function; everything seemed normal, I asked it to find the word "smith", but it wasn't there (but it really was). I then tried the word "the", not there either. Neither was "and". What's going on? [FWIW, I use Norton if that's a problem for "find".] Thnx
I just realized that it does work on some documents. Would working or not working depend on how the PDF was generated? For ex, some of my PDFs came from a scanner, some were web-PDF conversions, some were exports (like from Family Tree Maker), some were originally PDFs, ....

Scanned PDFs that have not had OCR performed will just contain an image of text, so they cannot be searched. Other files may have messed up fonts. Without looking at eachc particular document, it's hard to say what's wrong.

Icon Preview In Finder Not Working Properly

Ever since upgrading to Lion I've had the issue of icon preview not working properly in finder. This mostly occurs with movie files such as .wmv files. Some take a long time to show a preview and some don't even show a preview. In Snow Leopard this was never an issue.
This also seems to happen in stacks as well. I'll get a greyed out box with a dsah borded. Seems as though it's the large files that do this.
Anyone have any ideas?

I'm experiencing the same thing but with all kinds of files that have shown a preview in snow leopard: pictures, PDF-documents, music (with album art). It seems that previews are not created automatically whenever I change the name of a file or edit it in any other way, the preview shows up instantly. Rebooting works, too.
This is really annoying and a little online search shows, several people are having the same problem. As far as I know, there's no fix yet.

Labview 7 for Linux on Redhat9,NI example Finder not working.

I have Labview7 for Linux on Redhat9, installed at /usr/local/lv71. "NI example Finder" is not working, the function of browser, search,submit,none is working. When I try to close it, the window looks dead, cannot close it. I will force to close it. What is the problem? Where are the examples?
Another question: the simple help text is working, but the details help is not working. I can open the help file by Mozilla. But I want the help could be linked, like what it is in Windows platform.
Thanks

Hello �
If whenever you type �labview� at the prompt, LabVIEW 7.1 is launched, it probably means that the paths are setup to launch 7.1 but it doesn�t necessarily mean that you do not have LabVIEW 7.0 installed.
If you only installed LabVIEW 7.1 in that computer, it is possible that somebody else had installed LabVIEW 7.0 before.
What I suggest doing is to run the UNINSTALL scripts for both, LabVIEW 7.0 and 7.1, and reinstall LabVIEW 7.1 as root, not as user.
Hope that helps!
S Vences
National Instruments

Finder not working after installing Leopard!!!

Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!

anamorphis wrote:
Hi everyone.
I'm getting a strange Finder behavior on my Intel iMac (not the newest version) after installing Leopard. The thing is, after instalation, when I start the computer, the top bar on the screen starts blinking, and there's no way to open a Finder window. And it stays like that forever! I tried to open Finder from the Dock, but the blue dot of the active programs blinks 3 or 4 times and then disapears. Plus, the only way to access the Apple logo on the corner to switch the computer off or restart it, is by opening one other program from the dock (in this case I have Safari running), because this way the top bar stops blinking.
So, I thought I should try to update Leopard to 10.5.1, and this could solve the problem. But no. It searches for new software updates, tells me that there are new updates, but I cannot see them nor install them!
This is really weird and annoying!
Anyone had this problem? Please, help me.
P.S.: Yes, I've tryed a second install of Leopard. Same thing!
Do NOT install any updates until you resolve the problem, which is unrelated to any updates. Updating a computer that is not working correctly will only make the problems worse, never better.
If this is the second install, was it on an erased HD or did you import your previous programs, etc?
It sounds like you might have some errant 3rd party software running.
Did you run a disk check and file permission verify/repair before installing?
Check your startup program window and remove everything there. Write them down so you can put them back later.

Finder not working Mac OS X 10.6.3

I am running a macbook pro which i start up with a flash drive. It has Mac OS X 10.6.3.
But, when I try to open a folder or finder window, the Finder stops working and I get the spinning pinwheel. After it stops, I can relaunch it with the force quit window, but the same problem persists. It is a pretty old laptop, somewhere around 2006 I think, but I never had problems with Finder when I started up from the hard drive.
If there is a known solution for this I would very much appreciate it.
Thanks in advance.
(PS I tried verifying the disk and permissions. There were lots of permissions to repair, but I did it, and I'm still having the finder problem.)

Flash drives are extremely tempramental for booting. Any other USB devices will slow them down. Also most are not preformatted for Mac booting:
https://discussions.apple.com/docs/DOC-3003
The webcam is a built-in USB device, so it may have something to do with it.
You are better off getting a Firewire hard drive. Firewire 400 to 800 cables exist if needed.

Finder not working anymore in Mavericks

Today i have upgraded my mountain lion to mavericks,when done my mavericks can not see anyfile or driver on the desktop
I can not open Finder,anyone can help me to fix it?I wana download mavericks again to re install but my app store can not download maverick anymore,dont know why
See?Finder is not working!i tried to open finder but still not opened

I have solved this by clicking on the little display icon at the top right of the screen and then clicking on Display Mirroring On. Not a very technical answer but it worked!

Finder not working...what should I do?

Finder hasn't been working for the past few days; so none of the icons on my desktop show up. I can sometimes open the Trash folder from the Dock, but cannot seem to click on anything. I have tried relaunching Finder and restarting my MacBook, but it's just not working.
I created a new admin account and Finder works fine, but since I cannot access Finder on the other account, I cannot transfer permissions from the +Get Info+ menu.
What can I do to make Finder work again on my main account? Please help!

Welcome to the Discussions.
The Installation Disks, are the Disks that shipped with your Machine, Disk 1 and 2. These are vital to the smooth running running of your System, and are used for several tasks, including Troubleshooting.
So, it's important that you locate them.
In the absence of them, for now, do this.
/Users/Yourname/Library/Preferences, locate com.apple.finder.plist and move it to the Desktop, Reboot. If all works ok, you can trash that file.

Finder not working AFFECTING LOGIC 9

Similar Messages

Maybe you are looking for