Finder/private permissions owned by system or me?

It's supposed to be owned by the system. There is very little in it that you should modify or delete unless instructed to do so.
(67648)

Similar Messages

"After Effects can't find Quicktime installed on this system" error message. Using Mac 10.9.2

First time I've had to launch After Effects Creative cloud on my new mac running 10.9.2
I keep getting an error message saying AE can't find quicktime installed on this system.
I've been able to work in After Effects but can't make a quicktime movie from a composition.
Anyone have this problem solved yet?
JM

This should help: troubleshooting QuickTime errors with After EffectsIf not, try this: fixing permissions problem that impedes start of Adobe applications

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search by operating system (if this is even possible).

Can anyone recommend a duplicate file finder application for OS10.6 systems? All the apps I find on the App Store are only for 10.7 and later. I don't know how to filter a search on the App Store by operating system (if this is even possible). I currently have a MacBook running OS10.6.8. If you can recommend an app, please post the URL. Would appreciate any helpful suggestions....
<Email Edited By Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Infopackage Idocs in status 2 - could not find code page for receiver system

Hi,
We just migrated our production system from BW 7.01 non unicode to BW 7.4 on HANA.
We now encounter issues with idocs while loading data into bw from our ECC5 source. When we analyze idocs in the source system it appears with the message "could not find code page for receiver system"
One weird thing is that the idoc seems to have been created before we started the infopackage in bw.. We controlled system time and AS time and everything seems ok.
We did not encounter this issues on our previous migration test runs..
Hope someone can help
Christophe

Hi,
Thanks for responding. We finally found out what the problem was.
We have two applications servers on our ECC with 2 different OS. One of them could not reach the new BW HANA server.
Regards
Christophe

I have to keep going back to utilities first aid and do a disck permission repair because my monitor keeps going to sleep. this is the message i get.Permissions differ on "System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/

I have to keep going to disk repair to correct an issue that makes my monitor go to sleep the message i get is
Permissions differ on “System/Library/PreferencePanes/.Displays/V1/Displays.prefPane/Contents/Resourc es/pt.lproj/DisplaysPref.nib”; should be -rw-r--r-- ; they are -rwxr-xr-x .

Have you done a PRAM reset, CMD+Option+p+r...
http://support.apple.com/kb/HT1379
In fact, do 3 in a row, takes a bit of time.
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

I am trying to connect my macbook air through my led tv using hdmi but it won't work. I could not find arrangement option on my system preference. how do i make it appear again on my system preference so i can mirror it through my tv. thanks

Hi jenette,
If you are having issues using an HDTV via HDMI as an external display to your MacBook Air, you may find the following article helpful:
OS X: How to use multiple displays with your Mac in Mountain Lion and earlier
http://support.apple.com/kb/ht5019
(Note: You will generally only see the arrangement option in Displays when you are configured to use the external display in Extended Desktop mode; there is no arrangement in Mirroring as both screens are showing the same image.)
Regards,
- Brenden

PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED"

HAI EVERYBODY,
PLEASE HELP ME TO FIND THE SOLUTION REGARDING "LOGICAL SYSTEM CHANGED" during the material master replication by using middleware parameters.
step1 : i have taken SRM client 810 and named it as CHINNISRM
step2 : i have taken r3 client 810 and named it as CHINNIR3
step3: During material master replication i maintained tables like crmconsum,crmrfcpar,crmparoltp in r3 and smofparsfa in srm client and filtered the objects and loaded the objects through r3ac3,r3ac1,r3as.
step4 : And later i have checked in r3 queues to activate the objects,but i have seen a message like "LOGICAL SYSTEM CHANGED:SEE 588701".according to the oss instructions i have checked in CRMPRLS table in se16 in R3 .there i found out there is one logical client named with T90CLNT810.
oss :588701
Solution
There are different cases in which different forms of processing are
required or where several options exist:
- The logical system name of an R/3 Backend client was changed in
current operation. In this case, the data hangs in the outbound
queues of the R/3 Backend system as specified under point 1 of
the symptom. In this case, the logical system name must be
changed back to the original value. Then the outbound queues
can be reactivated. If no data was transferred to the EBP/CRM
server before the change, also a correctioin of the check table
is possible.
- The same logical system name was used again in a new client of
an R/3 Backend system that was linked to the EBP/CRM server. In
this case, the data is in the inbound queue of the EBP/CRM
server with the exception GUID_FOR_LOGSYS_CHANGED. In this
case, the queue entries which have status SYSFAIL must be rejected, however, not the entire queues. If the new client of the R/3 Backend system you have linked has exactly the same
data as the old client and if it is meant to replace the old
client (that is, this was deactivated), also a correction of
the check tables is possible. In this case, the inbound queues
can be reactivated after the correction.
oss:765018
1. If the situation in your system corresponds to the situation described
under "Reason and Prerequisites" and if symptom 1 occurs, you can
delete the table entry from table CRMPRLS table (there is just one
entry). Since there is no maintenance dialog for this table and you
cannot maintain it using transaction SE16, you must use a report to
delete it. This report is attached to this note as correction
instructions.
Create the report ZZ_DELETE_CRMPRLS in your system and copy the source
code from the correction instructions. You cannot implement this
source code using transaction SNOTE.
You can use the report in every plug-in or plug-in basis system, even
if it is not specified in the validity section.
After you have run the report, you can trigger existing queues again
in transaction SMQ1.
2. If the situation in your system corresponds to the situation described
under "Reason and prerequisite" and if symptom 2 occurs, you can
delete the entry from table CRMMLSGUID (there is just one entry).
Since there is no maintenance entry for this table and you cannot
maintain it using transaction SE16, you must use a report to delete
it. This report is attached to this note as correction instructions.
If they do not yet exist, add the following messages to message class SMOF in your logon language:
Message Message short text
303 User &1 is not allowed to change table &2.
304 User &1 IS not allowed to display table &2.
305 Logical system &1 was not found in table &2.
306 System error! The current client was not
found in table T000.
Create the report ZZ_DELETE_CRMMLSGUID in your system and copy the
source code from the correction instructions. You cannot implement
this source code using transaction SNOTE.
You can use the report for every release of the CRM system, even if it
is not specified in the validity section. The only exceptions are CRM
releases with Support Package versions that are too low such as CRM
Release 3.0 with Support Package 12.
After you have run the report, you can trigger existing queues again
in transaction SMQ1 of the R/3 back-end system or transaction SMQ2 of
the CRM system.
so what should i do to do the replication.please suggest me .untill and unless i solve my problem i cant move to the further activity.i hope you people can solve my problem.thanks in advance.
thanks and best regards,
n.chakradhar

Hi chakradhar,
Did you find a solution to your issue? We are facing a similar issue and looking to figure out how this can be resolved.
BR// 420

SAP XI 3.0 - Error while reading the ID of own business system from the SLD

Error while reading the ID of own business system from the SLD for system Quality (QOC) and Client 100.
I get this error in the SXMN_MONI. The business process is that the Interface to send master schedule and finished inventory from the legacy system to SAP to create planned orders in SAP for all Plants.
I could able to get "SUCCESSFULLY PROCESSED" in development and production. But only in Quality I getting this error. Could anyone help me to fix this issue.
thanks...

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD

HI guys when trying to send Idoc from my R/3 system to SUS i am getting the following error in XI
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>DSM</SAP:P1>
<SAP:P2>900</SAP:P2>
<SAP:Stack>Error while reading ID of own business system from the SLD for system DSM and client 900</SAP:Stack>
I checked in sxmb_adm on both the ends on Xi as well as on my SUS server in Xi the role is the Integration server and on the SUS it is Application server also checked SLDAPICUST which is configured rite. Plz help me to come out of the problem.
Regards,
Anand

Hi Anand,
check the two thing's in XI.
1. First created technical system in XI to identify your XI server (Web as ABAP and Web AS Java)
2. Create the business system based on above technical system and select the role of business system is Integration server.
URL : http://<hostname>:<ICM Port>/sap/xi/engine?type=entry.
3. Create the technical system based on your SAP R/3 system.
4. Create the business system based on your SAP R/3 system.
here you need to select role of business system : Application system.
related integration server is : <XI System SID has to come>
and try to refresh the initical cache once ...
http://<hostname>:<j2ee stack port>/CPACache/refresh?mode=full
after all the things post what is the problem you are faceing.
Regards,
Venu.

How to find out the password of system?

Dear all,
I would like to know how to find out the password of system as I forgot it?
Thanks a lot
Francis SZE

Since oracle passwords are encrypted so you cant see actual password. But you can use following procedure to login to oracle with system user.
For any account issue this statement.
select username,password from dba_users where username='SYSTEM';
EMDU27ANS729273
this will give you the password in encrypted format.
Now you can change that password for temporary purpose.
alter user system identified by test;
Now login and do your work.
After login you can issue this statement to reset the password to its original value.
Alter user system identified by values 'EMDU27ANS729273';
You have to enter the same encrypted password in the quoted string which you had found in 1st statement.
Cheers.

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

RPM_FIN02 - Receiver of IDoc is its own logical system

For one particular portfolio item, I run the RPM program RPM_FIN02.
This results in an IDoc creation.
Next, I checked the status of the IDoc (RPM > Base System Interfaces > SAP Financial and Controlling Integration > Data Distribution From SAP FI-CO to SAP xRPM > Check Inbound Processing).
This shows the status "29 - Receiver of IDoc is its own logical system".
As a result, the Internal Order costs (including the ones posted from cProjects) do not get pulled into RPM Financial Planning.
Please advise.
I do not have the technical understanding of this issue, and would therefore need a little more than the mere technical jargons and terms to be able to resolve this.
Thanks for understanding.

Hi,
Very briefly,
-Assuming your RPM system is independent of your ECC box. But RFC connected.
-RPM_FIN02 is for pulling in financial data onto RPM item from (object linked) Internal Order(IO)/PS Project(PSP).
-RPM_FIN02 do not recognize/goto cProjects for financials.
-cProjects can have its own account assigned IO/PSP
-cProjects Dashboard, (if all is well incl. evaluation) should display costs from assigned IO/PSP
-This cost does not reach RPM item
-Source of cProjects- if it is created within cProjects or from RPM Item, does not matter.
thanks,Mathavan

IDoc Status 02 ( Could not find code page for receiving system )

Hi All,
I am getting Idoc status 02 when I am trying to send IDocs from ECC to PI system ( Production ).
Error description.
Could not find code page for receiving system
Message no. E0266
Diagnosis
For the logical destination PIP001, you want to determine the code page in which the data is sent with RFC. However, this is not currently possible, and the IDoc cannot yet be dispatched.
Procedure for System Administration
Possible causes are:
1. The entry no longer exists in the table of logical destinations.
2. The target system could not be accessed at runtime.
3. The logon language is not installed in the target system.
4. In the destination system, no logon language is maintained
Please help.
Thanks - Vinay.

Hi Vinay,
Status 02 occurs when data is not passed to port suceessfully. Check the RFC desination is working fine and your able to connect to target system and also check correct port is assigned.
Regards,
Vinod.

Finder/private permissions owned by system or me?

Similar Messages

Maybe you are looking for