Finder quits and restarts!

Sometimes when I go to view images on CoverFlow mode, the Finder quits, hides all windows and open apps, then reverts but not in CoverFlow mode, usually the column mode, and is never at the folder/place where I was in CF - goes back to a previous folder I was at.
Any reason for this??
Thx
Dean

...in fact just adding to this - I've noticed that the windows open and the folders/places at which they display are actually the same as when the computer started up this morning - I remember having just looked at them.
May give some clues?

Similar Messages

  • Mavricks finder quits and restarts continuously

    I just upgraded to mavrick and my finder restarts every 60 seconds and the arrangement preference changes presidence

    I killed google drive per another thread and it has stopped.

  • "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook" in Exchange 2013

    In Exchange 2013, Outlook finds a new connection point made up of the user’s mailbox GUID + @ + the domain portion of the user’s primary SMTP address. This change makes
    it much less likely that users will see the dreaded message “Your administrator has made a change to your mailbox.”
    http://technet.microsoft.com/en-us/library/dd298114(v=exchg.150).aspx
    Although the error message in the topic has been already improved a lot in Exchange 2013, the users may still encounter them in some specific scenarios. We have collected them and let’s discuss them in this thread.
    Symptom
    =======================================
    Consider the following scenario:
    Exchange 2013 was installed for a migration from Exchange 2007/2010.
    The legacy Exchange server is removed after successful migration.
    Exchange 2013 may be updated to Exchange 2013 SP1.
    Some users were being randomly prompted with a popup in their outlook client with the following message when connecting with Exchange 2013 server:
    “The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
    Cause
    =======================================
    The issue may be caused due to Public Folders.
    The msExchHomePublicMDB attribute on Exchange 2013 databases was set to deleted legacy public folder object.
    Solution
    =======================================
    Removed the Public Folder from all the Exchange
    2013 Databases. To do it, we can use ADSIedit.msc and remove the arrtibute - msExchHomePublicMDB from all the Databases:
    1. Open ADSIEdit.
    2. Connect to the Configuration container.3.
    Expand Configuration, expand CN=Configuration,DC=Domain,DC=com.4. Expand CN=Services -> CN=Microsoft Exchange -> CN=Domain -> CN=Administrative Groups -> CN=Exchange
    Administrative Group -> CN=Databases.5. In the right hand pane you will see a list of databases.6.
    Right-click the listed database object -> Properties.7. Check whether the msExchHomePublicMDB value is set to an unavailable value. If you see reference to the old database,
    please clear the value.8. Click OK.9. Check the rest of the databases to make sure
    that they are not populated in the same way.
    References:
    https://social.technet.microsoft.com/Forums/en-US/2f736bdd-1c00-4a22-97a5-95faeadf1495/exchange-2013-sp1-users-randomly-prompted-with-the-microsoft-exchange-administrator-has-made-a?forum=exchange2010
    https://social.technet.microsoft.com/Forums/lync/en-US/7a7b3cf8-8761-421c-9d55-6c84e05531c0/the-administrator-has-made-a-change?forum=exchangesvrclients
    https://social.technet.microsoft.com/Forums/en-US/0d71c843-b662-493c-ab6e-30708929ef18/2013-sp1-problem-the-microsoft-exchange-administrator-has-made-a-change-that-requires-you-quit-and?forum=exchangesvrdeploy
    Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

    This one? http://support.microsoft.com/kb/2934750

  • The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    The dropdown menu from the Creative Cloud icon on the menu bar keeps giving me the following message: "Download Error" I quit and restarted the creative cloud app to no avail. Running Mavericks on a mid 2011 iMac.

    Try below steps once
    click Gear icon on the top Right corner and Quit Creative Cloud App
    Click on Finder and then hold Command + Shift + G keys on your keypad
    It will open Go to folder window, type  exactly ~/Library and click on Go
    Make sure to open ~/Library not /Library (  there will be two Library folders )
    Then open Application Support > Adobe folders
    Trash AAMUpdater and OOBE folders.
    Then launch Creative Could and check.

  • Weird quit and restart!

    Hi,
    I've just started using MainStage, and plan on using it LIVE. I was building a concert today, with about 16 patches, when something very strange happened. After editing a patch, I hit full screen, and my computer restarted!
    Has this ever happened before to anyone of you guys?

    I've had that happen maybe once, in the over than 100 times I used it.
    Use the console application and look for the time and date that weird quit and restart occurred. The console application is in the Applications -> Utilities -> console, look thru the system log first, then console log after ( use file open ).
    If you see some error that did get reported to the console, which I bet you did, it will give some clue. Find and report back here a couple lines before and after that time period when MS quit.
    Mag

  • Safari 5.1 will not change my privacy settings without quitting and restarting the browser.

    I have installed Safari 5.1. When I attempt to change the block cookies setting in the privacy preferences, the browser will not change the settings until I quit and restart the browser.

    Quit Safari. Open a Finder window. Select your Home folder in the Sidebar on the left.
    Open the Library folder then the Cookies folder.
    Move the Cookies.plist file from the Cookies folder to the Trash.
    Restart your Mac.
    If that didn't help, quit Safari. Open a Finder window select your Home folder in the Sidebar on the left. Then open the Library folder, then the Caches folder, then the com.apple.Safari folder. Move the cache.db file from the com.apple.Safari folder to the Trash. Relaunch Safari.

  • My mac keep quiting and restarting for no apparrent reason any ideas

    My mac keeps quiting and restarting, like the power has gone out but it hasn't, any ideas?

    Which version of OS X do you have installed and please describe your iMac's specifications. Without this vital information it is difficult to help you. Also please complete your profile so we can find out about your system, if you don't know how please click Profile Update for instructions. It will not show on this thread however it will on your next thread.

  • I cant open Photos om my mac. Just upgraded to Yosemite. The message I get is: An unexpected error has occurred. Please quit and restart the application. I have done this several times but nothing seems to work. iPhoto is gone. What do I do?

    I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

    I just upgraded to Yosemite on my mac from 2010. Everything seems to work, accept Photos. When I try to open it i push the "Get started" button, then the picture with "Preparing Library" comes up. Then a message appears with the text "An unexpected error has occurred. Please quit and restart the application." I have done this several times, but nothing happens. What do I do?

  • The Microsoft Exchange administrator has made a change that requires you to quit and restart outlook.

    Then I get this once outlook is open:
    Cannot start Microsoft Outlook. Cannot open the Outlook window. The set of folders cannot be opened. The operation cannot be performed because the connection to the server is offline".
    Outlook 2013 client
    Exchange 2010 SBS
    I have recreated the profile, doesn't work. Recreating the OST doesn't work. Starting Outlook in any safe mode doesn't work. Disabling hardware acceleration and add-ins does not work.
    repair account does not work -  I get the Congratulations message, confirming it was able to get everything from the server... and when I restart Outlook:
    "The Microsoft Exchange Administrator has made a change that requires you to quit and restart Outlook".
    BJN
    Also the user in question is not getting new mail.
    And I have tried this
    outlook /resetnavpane to no avail.

    Hi,
    Please confirm if the issue happens to all users in your Exchange server.
    In client side, please check the Connection Status when the issue occurs:
    Please open Outlook - press CTRL key - right click on the Outlook icon from right bottom corner taskbar –Connection Status to check the connection.
    Please notice the Server name, status, protocol and Type information.
    In Exchange server, please check whether all Exchange services are started and running in Exchange 2010. Also check whether there is any error information in Event Viewer.
    If the issue only happens to one user, please update the Outlook client with the latest patches and service packs to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • Exchange 2013 SP1 users randomly prompted with "The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook"

    I got a call to check an issue with a Exchange Server 2013 SP1 environment recently. All server was upgraded from Exchange server 2013 CU2 to Exchange Server 2013 SP1. It was done successfully but many users were being randomly prompted with a popup in their outlook
    client with the following message:-
    “The Microsoft Exchange Administrator has made a change that requires you quit and restart Outlook”
    Although there wasn’t any changes of late in the environment there were random popups like these for multiple users. As the behaviour was not consistent and effecting the entire upgration population
    Please suggest us how to resolve the issue.
    Regards, Md Ehteshamuddin Khan All the opinions expressed here is mine. This posting is provided "AS IS" with no warranties or guarantees and confers no rights.

    Hi,
    Does the issue happen to all Outlook 2013 users? Please create a new Outlook profile to have a try.
    If it fails, please check the msExchHomePublicMDB value in ADSI Edit:
    1. In Adsiedit, expand Configuration-->CN=Services -> CN=Microsoft Exchange -> CN=domain -> CN=Administrative Groups -> CN=Exchange Administrative Group -> CN=Databases.
    2. Right-click the listed database > Properties.
    3. Check whether the msExchHomePublicMDB value is set to an available value. Please change the value to <not set>.
    4. Click OK.
    Then check whether the issue persists.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • My Black Macbook froze using Safari.  I forced quit and restarted.  Before the chimes there was a single buzz, from below the keyboard.  What's that all about?

    My Black Macbook froze using Safari.  I forced quit and restarted.  Before the chime, there was a single buzz, from below the keyboard.  What's that all about?

    http://support.apple.com/kb/HT2341
    Might be RAM related if the above tip describes what happened.
    If not, and your data is not backed up, and it won't startup, read this tip:
    https://discussions.apple.com/docs/DOC-1689

  • Mail Missing Plug-in after sending; quit and restart Mail fixes it

    mail > Missing Plug-in after sending; quit and restart Mail fixes it.
    Its very obnoxious after all these years to have Apple Mail continue to complain about Missing Plug-in
    This happens for PDFs, .zips, .jpgs and other types.
    Any ideas why Apple cannot seem to fix this?

    Back up all data.
    Boot into Recovery mode. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. You don't need to erase the boot volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade, so make a note of those before you begin.

  • Finder crashes and restarts when Adobe PDF documents are accessed.

    Recently I've been having problems with my Finder crashing (window closes and the dot under the Finder icon in the Dock goes out) and restarting (dot under the icon in the Dock comes back on). The problem occurs when I select an Adobe PDF document in the Finder. I use column view. If I click once on a document to see the Preview information in the next column, or if I double click to open the document, the crash and restart occurs. However, it doesn't happen for all Adobe PDF documents. If the icon next to the document name in the Finder shows the first page of the document, the problem does no occur. But if the document icon remains the Adobe logo, the problem occurs.
    I'm running Os X 10.5.5 on one of the early iMacs. Other than regular Apple updates, the only software change I've made recently is to install Adobe Flash Player.

    Here's an update.
    The problem seems to be confined to the Finder when Column view is selected. When List or Icon view is selected there is no crash and restart. When Cover Flow is selected the Finder crashes and restarts, but the pattern seems a bit odd. It crashes when some folders or subfolders are selected, but not others.
    In Column view the problem occurs for some Adobe PDF documents where the document icon is the first page. It occurs for all PDF documents where the icon is the Adobe logo.

  • MS Outlook 2013 Error message "The microsoft exchange administrator had made a change that requires you to quit and restart outlook"

    I am currently running 2 HP Servers, SAN Storage. I have Exchange 2013 installed and MS Outlook 2013 randomly appears with the message
    "The Microsoft exchange administrator has made a change that requires you to quit and restart outlook" It is happening very frequently and is appearing every few seconds on a lot of users.

    Hi WeeMac22,
    If you migrated from Exchange 2010 to Exchange 2013, I found a KB for your reference:
    Outlook 2013 cannot connect after an Exchange Server 2010 mailbox is moved to Exchange Server 2013
    http://support.microsoft.com/kb/2934750/en-us
    If not, I suggest using OWA to verify whether this issue remains.
    1. If everything works well in OWA, it seems an issue on the Outlook client side.
    I suggest run Outlook under safe mode to avoid some AVs and add-ins.
    I suggest re-create profile to refresh the caches.
    I suggest re-install the Outlook if all methods above not working.
    2. If this issue remains in OWA, please verify whether all users on the Exchange 2013 have this isse.
    If only one user has this issue, I suggest create a test user to check whether the test user has this issue.
    If the test user works well, I suggest try to re-create the specific user account.
    Please make a full back up before re-creating.
    Thanks
    Mavis
    Mavis Huang
    TechNet Community Support

  • Microsoft Exchange administrator has made a change that requires you to quit and restart Outlook.

    guys we just did the exchange migration from SP3 RU6 2007 to exchange 2010 SP2 , and moved the mailboxes , but few users are getting the prompt saying that -
    Microsoft Exchange administrator has made a change that requires you to quit and restart Outlook.
    So what best can we do to fix the issue. Apart from creating the new outlook profile i know that can be done but to get deeper is anything related to CAS Arrays preferred site enforcement.
    Thanks

    Hi,
    Once you moved the mailboxes from older version to new version Exchange RPCClient access Point will change as per new database settings, so users normally get the popup saying that "Microsoft
    Exchange administrator has made a change that requires you to quit and restart Outlook", so user has to restart the outlook to update the new configuration.
    If its taking long time that you have to check the autodiscover URL which is configured in Exchange 2010 and Exchange Replication service these services are responsible
    to update the new configuration in client.
    Also if users are different location (AD Site) it will take some time to replicate.
    I hope there won't be any issues for client due to this popup.
    Regards
    Ganga Enterprise Messaging Administrator-Exchange 2010. Windows 2008 Active Directory Configuring.

Maybe you are looking for

  • Download error on seminar

    Trying to download the seminar "Building J2EE applications using JDeveloper, ADF and TopLink" from http://www.oracle.com/technology/tech/java/newsletter/seminars.html This causes an error on the download that an incorrect login is used. Playing the s

  • MacBook Pro with Retina Display or without?

    I am an ametuer photographer and I want a Mac to edit my photos. I've heard that the MacBook Pro is better for RMD. I was wondering if, for editing photos, if I should get it with Retina Display or without? Thank you for your help.

  • HT204291 Airplay and mirroring not appearing on iPad Air, all devices up to date. Connected to same wifi network.

    Airplay and. Mirroring not working, all devices have airplay turned on and same network. Tried hard reboot of device as well.

  • IView not visible for a single user

    Hi All, I am facing the a problem in our client's portal. The application is not visible for one of our client user on the portal. When he clicks on the Role->Workset->Application name, the IView is not displayed on the screen. Instead, blank page is

  • Related To Metalink...

    Hi All, Actually I want to make Oracle media request.Every time when I click on Service Request and create Sr after then I can fill three fields like Contact me Via Metalink,Phone Number,and I will enter the text of this SR in english but in 4th fiel