Finder says "1.27PB available" NOT "200 GB". Why? What's the solution?

The Finder on my Mac says there is 1.27PB available on my internal hard disk instead of "200+GB available". Does anyone know why or what the solution is? The Finder does however display the available capacity on a portable drive correctly..

In the end I decided to contact Apple technical support and they talked me through an S.M.C. reset, a P.R.A.M. reset, directed me to run Disk Utility and do a check of the disk with Disk First Aid & Disk Permissions, and ultimately I was told I should boot up in recovery mode after Safe Mode showed the issue was systemwide, and reinstall O.S. X fresh from the closest Apple server and not use a copy of the installer for 10.10.1 I had saved, which meant my Mac was incapacitated for about 8 hours, but once it was finished the erroneous display of the available storage capacity issue had been eliminated.
There was another issue of having trouble downloading files, but when I acted on my idea of trying a different V.P.N. server than the one I had been using that issue disappeared too.
I don't know whether what you suggested would have made any difference to the issue, but my Mac works properly again so I am happy. I do however, appreciate your directing me to try what was suggested to you and I hope your Mac is going well too.
Cheers!

Similar Messages

HT201304 I can't purchase any. I'm buying gems in-game. There always a message saying 'Your Purchase Could Not Be Completed.' What's the problem? I have $100.63 credits. I can't use them. I just change my name in my apple id. Can anyone help me?

Help me! I can't purchase any. I'm buying gems in-game. There always a message saying 'Your Purchase Could Not Be Completed.' What's the problem? I have $100.63 credits. I can't use them. I just change my name in my apple id. Can anyone help me?

It's still the same message. Your Purchase Could Not Be Completed. For Assistance, Contact iTunes support at www.apple.com/support/itunes/ww/.

My iPhone5 does not work!! What is the SOLUTION???

My divice is iPhone5 I have problem where it stopped working suddenly, although the battery was 97% , I tried to run it but to no avail . the screen is black & it appears nothing but if I compass shipping or cable to the computer it shows the Apple company logo ( Apple ) for a few seconds & then disappear & appear & disappear as long as it is connected to the cable or tha computer but does not work! WHAT IS THE SOLUTION ???
PLEASE HELP ME

ASSARKHI wrote:
but I have a contents are very important, I did not make backup copy!!!
Then you've learned a valuable lesson.

Audio and Video not synchronized...what's the solution?

Hi,
I was trying to record a video on my webcam (I think its Creative Gamestar) and during playback I noticed that the audio is playing slower than the video; in other words both are not synchronized...what could be the reason for this? Is there a solution.
I used the DivX 6.0 video codec. The audio compressor was MP3 at 48,000 Hz, 6 bits, Stereo. Do I need to use something other codec? Please reply! The reason I used DivX was that the default codec was creative a 2Gb file for a 5 minute video.
Looking forward to replies. Thanks in advance,
Badfan.

Hi John and techkid123
We have 4 cameras here. 1 is Sony model HD1000 (since it works with Mini-DV cassete we need to capture the image via Firewire). 2 cameras are Sony HD2000 (it generates *.MPEG files if I remember well). And 1 camera is a Panasonic AG-DVC7 (it generates *.MTS files)
We start a new project using the Standard NTSC Widescreen 48Khz format. When we drag to the timeline for example the MTS file...Premiere ask us if we want to Keep and Change timeline to suit the file specification. Anyway we always have 1 or 2 camera files that has a yellow line over timeline.
But I renders correct...no problem to edit...and we had no problem with Premiere CS5.5 :/
We are downloading the latest update of Premiere. I´ll make some test and publish here if the problem persist.
Thank you a lot for the help
Gustavo.

When I click safari on my iMac it says my toolbar does not support this. What is the issue?

My safari won't open. When I click it, the message says the toolbar does not support this. How can I fix safari?

You installed the Conduit spyware. To remove it, back up all data, then follow these instructions.
If the instructions don't work, proceed as follows.
Triple-click the line below on this page to select it:
~/Library/Application Support/Conduit
Copy the selected text to the Clipboard (command-C). From the Finder menu bar, select
Go ▹ Go to Folder…
Paste into the box that opens (command-V), then press return. A Finder window should open with a folder named "Conduit" selected. If it does, delete the selected item.
Repeat with this line:
/Applications/Toolbars
Now you're deleting a folder named "Toolbars". You may be prompted for your login password. Next, copy this line:
/Library
Select Go to Folder… again and paste. Don't delete the Library folder. Delete only the following items inside it, if they exist.
Application Support/Conduit
InputManagers/CTLoader
LaunchAgents/com.conduit.loader.agent.plist
ScriptingAdditions/ct_scripting.osax
Close the Finder windows you opened. Log out and log back in.
I've seen a report that Conduit may be bundled with a scam "utility" called "MacKeeper." If you installed MacKeeper, you should remove it according to the developer's instructions. It's worthless and causes many problems reported on this site.

My Canon 70D Camera software says it's not compatible with Yosemite- what is the solution?

Just wondering if there is a fix for my canon 70 software incompatibility with Yosemite 10.10.
Message alert says cannot be used with this version of the operating system, and as a photographer, I may need a quick solution to this quickly. HELP!

Well the Apple Tech was wrong, the card slot did not work either, it got 80% uploaded and said to check the silverlight version. I guess it's a step backwards on the OS system for me until Canon gets the driver updated for Yosemite

Importing video from Sony HDR-CX410 FCP 6.0.6 will not recognise AVCHD files. what is the solution?

First I have to admit I'm not technical in any way so I'm easily confused so please forgive me if my question sounds unprofessional.
The computer is a Mac desk top tower with Lion OS x 2x2.66 GHz Dual-Core Intel Xeon with an internal hard drive plus a number of remote hard drives.
I'm using Final cut pro 6.0.6 to edit video.
The question is, up until now I've been using material shot on mini DV tapes, then digitised into the computer via the camera. As this format is getting long in the tooth I decided to get one of the latest DVCAM cameras, I went for the Sony HDR-CX410.
It was not until I had purchased the camera & shot a few test seq. & then tried to down load into the computer that I found out that Final cut does not recognise the AVCHD files on the SD card.I've tried importing from the camera as well as a card reader with no result.
I've looked at a number of sites including Apple support community where it looks like this is a major issue for many people but I can't find anyone who is using the same camera. I wondered if this issue is something you have covered in the magazine, if so please let me know which copy, if not can you help in any way. It appears that Final cut proX may be able to translate the AVCHD files but I'm not sure. Am I right in thinking that if I do upgrade to FCPX I will still have to convert the files, if so would you recommend a suitable software program. Is there any reason why Apple make it so difficult to edit this AVCHD format when all the latest cameras are using it, perhaps its time to change back to a PC?

Eric,
FCP 6.0.2 (compared to previous version) comes with the latest improvement and support for AVCHD.
However, here is a suggestion:
In Log&Transfer (top frame) on the right of *search field* there are three buttons, click on the one showing a little arrow-down and a sort of little star. Choose preferences then in the *transcode to* section click on those two tiny arrows pointing one up and the other down and choose Apple Intermediate Codec. Can you now transfer? (Add selection to queue)
Once again 6.0.2 might provide better support for your camera.
Use the search tool for more info.
G.
PS. Please note that some people have had problems with 6.0.2 so get us much info as you can before updating.

After searching in Google, resulting links will not open, get a 'Firefox not responding' message. What is the solution? Ray Allum

After doing a Google search for web sites, the reultant links will not open, a 'Firefox not responding' shows in the URL bar.

I had the same problem and my solution was to disable the PDF extension that came with Firefox 4 which belongs to another company. I found out that it wast interfering with ReaderX. I unabled it and restarted Firefox. I have had no problems since then. Go to Tools, Add-On and click on Extensions and disable the PDF extension. I hope this helps

Can not update error 1602 and can not restore error 1604 what is the solution

Have a IPod touch 4, can't update (error 1602) and can't restore (error 1604) any solution?

try this support article.

My blackberry bold 9780 bluetooth is not turning on. What is the solution to that,please?

Bluetooth problem for blackberry bold 9780,I need a solution please

This is the best fix for your device!
Click if you want to Thank someone. If Problem is resolved, so that others can make use of it.

TS3406 I cannot hear other people when I use my phone. The only way to make a phone call is to use the speaker phone. I have rebooted and restored the phone and still it will not work properly. What is the solution?

I can only use my phone by using the speakerphone. I have rebooted and restored. What is the solution

No case. The issue seemingly went away overnight. I don't know what caused it to occur or what happened to make it go away.

Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

Trying to update apps on iPhone keeps saying funds not available which there are. What's the minimum balance for free updates?

Updates are free. Upgrades aren't.

I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you hav

I have replied to you three times now without reply. I DID NOT authorise a payment of £9.99 for NowTV. What is the solution to getting my money refunded. I think you assume I will go away after being Ignored. No I will not go away. I find now that you have DISABLED MY APPLE ID. Is this a punishment you use to anyone who takes up a stand against charges being made unauthorised on their account?. Please tell me why you have disabled my account. When will my account be restored? If not when will you refund ALL my purchases made to APPLE/ITUNES? I can then move on to another brand and hopefully better customer service. After reading articles regarding APPLE ID DISABLED it appears common practice from your company to DISABLE anyone's account if they question unknown charges. Please reply with your intentions regarding the unauthorised payment and the DISABLING of my account.
David Forrester.
Sent from my iPad
On 18 Mar 2014, at 09:20, iTunes Store <[email protected]> wrote:
Follow-Up: 319042795
Hello again,
I wanted to send a quick note to see if you are still experiencing any difficulties with the iTunes Store. Resolving your issue is important to me, so please don't hesitate to reply if you need any further assistance.
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Dear David,
Welcome to iTunes Store Customer support.
I understand that you have been charged an additional 9.99 GBP for a purchase that not authorized. I know how eager you are to know more about this purchase and I am happy to look into this for you.
David, the purchase worth 9.99 GBP was for a day pass from "NOW TV for Apple TV." To review your iTunes Store account's purchase history, please follow the steps in this article:
iTunes Store & Mac App Store: Seeing your purchase history and order numbers
http://support.apple.com/kb/HT2727
Please reply to this email and let me know if this purchase was unauthorized.
Thank you for being an iTunes Store customer. Have a great day!
Sincerely,
iTunes Store Customer Support
http://www.apple.com/support/itunes/ww/
Lang_Country: en_gb
User Storefront: UK
Concern Type: Problem Not Listed
Web Order #:
Content Title: NOW TV Day Pass
Provider Name: BSkyB
Track IDs: []
Purchase Date : 2014-03-16 12:33:48 Etc/GMT
Purchase Device : Apple TV
Comments : I am being charged for what is listed plus another _9.99 for Apple TV pass. Did not authorise this _9.99 charge and not sure what it is exactly.
<Personal Information Edited by Host>

This is a user-supported board. You are not addressing Apple here. Nor is it a good idea to post your private information to a public forum. You should edit your post immediately.
Unfortunately no one here can access your support history. You must respond to the emails directly.

TS1277 iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!

iTunes is unable to run. I tried to run iTunes and a message comes up that says "the iTunes library.itl file is locked, on a locked disk, or you do not have write permission for this file." what is the solution to unlock it ?!

I have tried both suggestions, unfortunately neither fixed this for me. Hoping there's another possible fix. Thanks in advance.
Empty/corrupt iTunes library after upgrade/crash and/or Repair security permissions for iTunes for Windows.

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to access the printer. Any thoughts?

When I replaced my PC desktop with a Mac Mini and hooked up my HP printer to it, I discovered that my other computers on the Wi-Fi network could no longer access the printer. The manual says Maverick OS will not allow PC's to share the printer. Does anyone else have this problem? My printer does not have on-board Wi-Fi but, otherwise, works fine. I shouldn't have to buy a new one. Is there a OS patch out there that would open the printer port for my PC computers?

I'm assuming that on the Mac, the System Preferences -> Sharing -> Printer Sharing -> [X] HP printer -> Everyone can print is selected? That is to say, the Mac will allow anyone to print using the printer, and that you did not try to restrict who can print.
How is your network configured? Bonjour as a protocol will NOT cross a router boundary. If you have 2 or more subnets active with the PCs on one subnet and the Mac on another, that would block the PCs from seeing the Mac.
You could have multiple subnets if you have more than one router, such as an ISP provided broadband modem/router and another WiFi Router. If the PCs are talking to one router and the Mac is talking to another, that could be a 2 subnet situation. The additional routers must be put into bridge mode, which is done differently depending on the router. But the basics are to diable DHCP and NAT services on the secondary router(s) having just one active router on the network.
Also, using Bonjour Browser on my Mac, it is showing me that the printer is being advertised as using Internet Printing Protocol, so if that is something selectable on Windows, maybe you can bypass Bonjour on Windows.

Finder says "1.27PB available" NOT "200 GB". Why? What's the solution?

Similar Messages

Maybe you are looking for