Finder showing Fetching in OD user/group

Hi. Recently. I added a new group and folder, and I share it out using AFP/SMB, however when I use finder to check the permissions. One of the group is showing Fetching... Instead of the group name. It can be random for different folders but one consistancy is that it is only displaying that for OD user/group.
Help please?
matthew

Hi again
If I tell you to try it whith an other account, it's just to be sure it's not a finder plist problem.
So I think it should be interesting to create an other admin account, just to exclude this way.
If you have the same problem whith the other account, except if it's the Finder itself that is corrup (it's probably not the problem) you'll have to check on the folder itself and it's the parent folder. Check hfs tags (getfileinfo) and resources (xattr), and compare ACL whith working folders.
Check the owner too, is it accessible from the finder ? (for example if you change the owner of a file)
Bye

Similar Messages

  • TS5292 What do I do if my original user account is not showing up in the Users & Groups window?

    I can't find any of my mom's information that was on her computer before I convinced to do the upgrade. HELP!!!!!
    I did the upgrade on my iMac with no problems.

    First, back up that folder. I don't think anything will happen to it, but I wouldn't take a chance.
    Next, go to Users & Groups and create a new account.
    Set the short user name to the exact same as that folder.
    When you create the account, it should warn that a home folder already exists and allow you to use it. Select that option.
    You should then be able to log into that account and everything will be as it was.
    Make sure you use the same password so that keychain will unlock normally.

  • WLS 8.1.5  console doesn't show ActiveDirectory (or custom) Users/Groups

    We currently have numerous apps running on a weblogic 8.1.4 portal domain. I am attempting to replicate this domain on 8.1.5. There are four authenticators on our old domain: a DefaultAuthenticator, an ActiveDirectoryAuthenticator, and two Custom Authenticators (based on the sample database authenticator), with JAAS flags set to OPTIONAL for all. Everything was working properly under sp4, including user/group/membership listings in console and authentication. Under sp5, while simple authentication seems to work with all providers, the user/group/membership listings in weblogic console have bad HTML (empty rows under any default authenticator users/groups). The active directory settings were migrated wholesale and I verified that authentication works against this provider. Just no usernames or groupnames. I tested with just ActiveDirectory and DefaultAuthenticator, DefaultIdentityAsserter.
    <p>
    I was able to debug a bit more using our custom authenticators. I have verified that the user and group lists are being requested and returned properly when you click on Manage Users or Manage Groups in weblogic 8.1.5 console. It just seems like somewhere in the console there is a problem and the HTML output is garbled. Here is a sample of my debug text, the method names and classes should be immediately familiar from the sample authenticator:
    <p>
    getUserLoginNamesMatching(*,50)<br>
    loginNames=[BF, DAD, NA, OTN, P1Adm1, P1User1, P2Adm1, P2User1, S, ab, admtest, gw, jb, joeschmo, kw, mf, mh, pa, rn, rt, super, test1, wf]<br>
    Success: listUsers(userNameWildcard = *, maximumToReturn = 2147483647) = Cursor0<br>
    Success: haveCurrent(Cursor = Cursor0) = true<br>
    Success: getCurrentName(Cursor = Cursor0) = BF<br>
    Success: advance(Cursor = Cursor0)<br>
    Success: haveCurrent(Cursor = Cursor0) = true<br>
    Success: getCurrentName(Cursor = Cursor0) = DAD<br>
    Success: advance(Cursor = Cursor0)<br>
    Success: close(Cursor = Cursor0)<br>
    getExistingUser(BF)<br>
    user=new UserEntry( BF, BF , BF, [PDA, ADM], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
    Success: getUserDescription(user = BF) = BF<br>
    getExistingUser(DAD)<br>
    Success: haveCurrent(Cursor = Cursor0) = false<br>
    Success: close(Cursor = Cursor0)<br>
    getExistingUser(BF)<br>
    user=new UserEntry( BF, BF , BF, [PDA, ADM], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
    Success: getUserDescription(user = BF) = BF<br>
    getExistingUser(DAD)<br>
    user=new UserEntry( DAD, Dummy Alcanto Demoer, LYNX, [PDA], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
    Success: getUserDescription(user = DAD) = Dummy Alcanto Demoer<br>
    getExistingUser(NA)<br>
    user=new UserEntry( NA, Nancy Aarons, 1234, [PDA, ADM], com.otn.mobilelynx2.security.providers.authentication.UserGroupDatabase@7f5e61 )<br>
    Success: getUserDescription(user = NA) = Nancy Aarons<br>
    ---- weblogic console output sp4, Manage Users ----
    User Description Provider <br>
    portaladmin Admin for portal domain DefaultAuthenticator <br>
    weblogic This user is the default administrator. DefaultAuthenticator <br>
    yahooadmin Admin for yahoo content DefaultAuthenticator <br>
    john John Smith DefaultAuthenticator <br>
    qamean ActiveDirectoryAuthenticator <br>
    qamin ActiveDirectoryAuthenticator <br>
    ---- weblogic console output sp5, Manage Users ----
    User Description Provider <br>
    portaladmin Admin for portal domain DefaultAuthenticator
    weblogic This user is the default administrator. DefaultAuthenticator <br>
    yahooadmin Admin for yahoo content DefaultAuthenticator <br>
    --- html for above (with weird empty rows) ---
    <FORM NAME=FilterUsers METHOD=POST ACTION=><P>Filter By: <INPUT TYPE=text NAME=filter SIZE=10> <INPUT CLASS='buttons' TYPE=submit VALUE=Filter></FORM><b>Displayed 68 of 357 Total, use filter to narrow your search results.<b><table border='1' cellpadding='4' cellspacing='0' height='20'><tr bgcolor='#b8cece'><th>User</th><th>Description</th><th>Provider</th><th> </th></tr><tr bgcolor='#FFFFFF'><td>portaladmin</td><td>Admin for portal domain</td><td>DefaultAuthenticator</td><td><img border='0' src='http://localhost:7001/console/images/delete.gif' title='Delete'/></td></tr><tr bgcolor='#FFFFFF'><td>weblogic</td><td>This user is the default administrator.</td><td>DefaultAuthenticator</td><td><img border='0' src='http://localhost:7001/console/images/delete.gif' title='Delete'/></td></tr><tr bgcolor='#FFFFFF'><td>yahooadmin</td><td>Admin for yahoo content</td><td>DefaultAuthenticator</td><td><img border='0' src='http://localhost:7001/console/images/delete.gif' title='Delete'/></td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr><tr bgcolor='#FFFFFF'><td><td><td></tr></table>
    Message was edited by:
    srhutch444

    i have reinstalled solaris and the problem continues.
    Under Solaris Management Console groups and users doesn't run ok. Editing an user i can't see groups and editing groups i can't see its users...very very extrange.
    A bug?
    I don't know what is happening :(

  • Deletion of user group

    hello,
    I created a new user group ,i am trying to delete that group but it is showing the error like
    user group XXXXX still used in master records.
    thanks and regards
    patan thavaheer

    Hi Thavaheer,
    which user group are you referring to? there are user groups in Ad Hoc queries, user Ids etc.
    In case, its Ad Hoc query, then you can delete the user group only if no query is saved in the user group.
    In case of user group of user IDs, if any user exists in the user group you won't be able to delete it.
    Regards,
    Ajinkya

  • Last modified by for a user/group object

    Hi All,
    Is there any way to find out who has last modified the User/Group object in the portal.
    I can see the last account unlocked by for the user object. But is there any attribute to find out who has last modified the assigned groups/users for the user/group respectively or any change in the user/group profile.
    Thanks in advance,
    Siva
    Pts will be rewarded for useful answer.

    Hi Siva,
    as far as I know there is no standard way to find out who modified a user/group object in the portal. But I just checked the official API of <a href="https://help.sap.com/javadocs/NW04S/current/se/com/sap/security/api/IUser.html">IUser</a> (represents a portal user) and <a href="https://help.sap.com/javadocs/NW04S/current/se/com/sap/security/api/IGroup.html">IGroup</a> (represents a portal user group) and found out something interesting. <a href="https://help.sap.com/javadocs/NW04S/current/se/com/sap/security/api/IPrincipal.html">IPrinciple</a> (super object of IUser and IGroup) has a field LAST_MODIFIED_BY.
    Looks like you can write your own portal component, which allows you to find out who has modified your users last.
    Best regards,
    Martin

  • Come The New Requirements Gateway Users Group

    Hello all,
    Have you ever tried to find an answer to a issue you are having with Requirements Gateway and been frustrated by not finding a dedicated forum or users group, well no longer!
    A Requirements Gateway User Group has been created on the communities and everyone, even those who are only curious, is invited to join.  There isn't much content at the moment since it's still a bit of a fledgling.  Please join and add your content, questions, & tips to help us grow.
    You can join by going to https://decibel.ni.c...way-users-group
    See you there.
    Wire Warrior
    Wire Warrior
    Behold the power of LabVIEW as my army of Roomba minions streaks across the floor!

    Hi D. Kelley,
    Thanks for the details. Based on your description, you might need to change or update the SID for users. Try identity command to change the username if you never use the new username in TFS. Check this page for more information about
    identities command in this
    page.
    You can also check the table "tbl_Identity" in the tfs_configuration database to see if the new user exists, or it has the old user. Another option is have a check on other machines to see if it works fine. Refer to links below for more information:
    https://social.msdn.microsoft.com/Forums/en-US/93568425-a877-4d21-8497-1adc4561b6d3/unable-to-check-in-code-to-tfs-due-to-tf14002-the-identity-old-user-name-is-not-a-member-of-the?forum=tfsversioncontrol
    https://social.msdn.microsoft.com/Forums/en-US/acc56859-624f-41bc-b698-cbb5e0b8f525/cant-check-in-code-the-identity-devoldusername-is-not-a-member-of-the-team-foundation-valid?forum=tfsversioncontrol
    Best regards,
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Creating User Groups

    Hi All,
    How can I create User groups in Application Express 4.0.1.00.03.
    I am not able to find the link for creating User groups after logging in as found in the Help:
    1.Log in to Oracle Application Express. See "Logging In to Oracle Application Express" in Oracle Application Express Application Builder User's Guide.
    The Workspace home page appears. Note I have logged in as administrator for Internal Workspace.
    2.Click the Administration icon. - Not able to find
    The Administration page appears.
    3. From the Tasks list, click Manage User Groups. - Not able to find
    The User Groups page appears.
    Thanks & Best Regards
    Arif Khadas

    Hello Arif,
    >> Note I have logged in as administrator for Internal Workspace
    You should login to your working workspace as a developer with workspace administrator privileges. At the Application Builder home page you’ll see the Administration icon, and within it the Manage Users and Groups icon. In this module, you should select the Manage User Groups Task.
    Regards,
    Arie.
    &diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    &diams; Author of Oracle Application Express 3.2 – The Essentials and More

  • Batch Risk Analysis in Full Sync mode with special user groups not working

    Dear All,
    we start Batch Risk Analyse Job in Full Sync with special User groups (use Range). In the Joblog I can see, that he selecet lesser users as in jobs before. But after all is finished (also managment job) when I go in Informer, he shows me also this user groups I have no analysed in Backgroudjob... Also he shows me in the detailed anlayse the date from a run before.. And we have deactivated some Risk - these are still in the analysis.
    Have some one a information for me what here is wrong..
    Best Regards
    Gabriele Herr

    to old..

  • "No Items" listed under defaults tab of Users & Groups

    After Mountain Lion upgrade from Snow Leopard, "No Items" listed under default images from Users & Groups as well as Contacts (which) I'm sure share the same library. Have repaired permissions, redownloaded and re-installed Mountain Lion as recommended by the Apple Geniuses, but to no avail. Anyone got any ideas? See image.

    Hi Leroy -  Sy Kim, another user in the community posted a solution that worked, see below.
    SY Kim
    Sep 10, 2012 6:42 AM 
    After upgrade(from snow leopard), user picture list have no items. (Users & Groups)
    Finally, I got the solution.
    The key is to delete every '.DS_Store' files in the directory '/Library/User Pictures/'.
    Open Terminal application and follow these.
    1. Chagne directory by command below :
    cd '/Library/User Pictures'
    2. Listing all files including hiddens in the directory by command below :
    ls -al
    3. If there is a .DS_Store file. Remove the file by command below :
    sudo rm .DS_Store
    (It need user password for execute)
    Then, it'll show every pictures in 'Users & Groups' control panel.

  • Show and Share API : Uploading a video to a particular user group

    Hi,
    I am trying to find a API spec for uplaoading a vide in Show and Share portal for a specific user group. But could not find such thing as usergroup, but just the Content Viewership is available where we need to input all the ____USERNAME____ to upload with access to the users rather than a user group.
    I would like to know if anyone can direct me to upload to specific usergroup rather than user.
    Thanks in Advnace,
    JK

    Jeffrey,
    What is the content format of the ORIGINAL source comment?
    - download MEDIAINFO video analysis program from the web.
      http://mediainfo.sourceforge.net/en
    - After installed, file->open-> pick your source file with issue.
    - change the view to TEXT and copy\paste the results into a
      TEXT file and upload here.
    From the MXE, highlight the SnS-MXE job and right click and
    open the JOB XML.  Same thing save the XML code in a text
    file and upload here
    Sidenote:  did you download the DMSprofile.zip file from the web
    and install the DMS profiles in the profile directory?
    Thanks
    T.

  • Neat OAM Trick (showing users' groups), but a problem...

    Hi,
    I took an OAM class this week, and the instructor showed us a way to show users' group membership in User Manager.
    To do this, create a derived attribute for the inetorgperson attribute, e.g., named "ThisUsersGroupMembership", and configure it with:
    Self
    groupofuniquenames
    uniquemember
    Then, add the derived attribute to the user panel, and then go into User Manager and display an individual user's profile. The user's group membership should be displayed as the "ThisUsersGroupMembership".
    I thought that this was pretty nice, but I noticed that if I go to the User Manager's main page and customize it to display the "ThisUsersGroupMembership" attribute,
    the attribute name is shown, but no values are shown for that attribute.
    I'm trying to figure out why the values for the derived attributes are not being displayed on the main User Manager page, and also if it's possible to get that working?
    Thanks,
    Jim

    Jim,
    Yes even I am not able to list users. I did not understand what you were exactly pointing to in your earlier mail.
    This seems to be a bug with OAM but before we arrive at this conclusion. I think we should try and look at the xml response sent by OAM for search result. I am not able to recall how we can see the xml response in the browser. If you know then you can try and see if the Groups of the user are returned? If groups are returned then you will have to look at the stylesheet being used and modify it to display the groups.
    If groups are not fetched then it must be a bug with OAM.
    Thanks
    Preetam

  • How to find user group from tcode

    Hi Experts,
    I have custom tcode from this i found report name as AQIDSYSTQV000001SD_RR_03======
    I am unable to find Queryname in SQ01 from this.
    When i saw some of the forums i  understood that IDSYST is the user group for my query but i am unable to trace such user group in SQ01.
    Please guide me how to find user group for my report
    Thanks&Regards,
    narasimha.

    Hi ,
    I found in table AQGQSTRUC but i didnt find the specified query
    Previously 401 client is there but at present it is not there .How can you justify it that it is 401 client.
    As 401 client data is moved to someother client is it the problem why i am not able to find query??
    Thanks&Regards,
    narasimha.
    Edited by: narasimha02 on Dec 7, 2010 9:54 AM

  • I lost an xcel doc. Tried to find the Library folder in Users not there when use Finder. But when trying to upload a photo, iphoto found the library folder I can see my doc in Office 2011 Autorecov, but can't access it! How do I get User to show Library

    I lost an xcel doc a couple of days ago. Tried to find the Library folder in Users but not there when I use Finder (even when I do shift-command-G). But when trying to upload a photo in iphoto I found the library folder in Users. I can see my doc in Office 2011 Autorecovery, but can't access it! How do I get User to show Library then I can get to my long lost document?

    The auto recovery dat should be in the Microsoft User Data folder in your documents folder, not in the Library. However, I Haven't had to look recently.

  • Sharing Only Accounts don't show in Users & Groups

    Hi,
    I've done a fresh install of Maverick yesterday.
    And I created a "Sharing Only" account so I can access my iMac from another PC (so it doesn't show up at logon time)
    When I went back in Users and Groups this morning, my newly "Sharing Only" account had gone.
    So I thought I'd forgotten it and tried to create it again: to my surprise at creation time, Mac OS reports: "Name is used by another user", when in fact it's not listed in the left sidebar (I can only see my accout and the guest account)
    I tried the same with a "Standard user" and all is fine.
    I tried with a second "Sharing Only" account and it disappeared too (after a logoff)
    I've found this article: http://support.apple.com/kb/TS4404 but I don't wanna screw up my fresh install
    Can anyone help?

    here also the same ... totally fresh out of the box Mac Mini with update to 10.9.2 ... create a share only user called "conf_share", add this user to a existing share ... go back to the User & Groups and paaaaaaaaaaaaaaaaaaaaaaaahhh it's disappear (but still existing of course)
    I found this "hint" but this is only usefull if you want to delete this user without going crazy... this hint will convert the sharing only user to a standard user
    Just type the following two commands in terminal:
    Quit and reopen System preferences and the sharing account will show up:
    sudo dscl . create /Users/root GeneratedUID FFFFEEEE-DDDD-CCCC-BBBB-AAAA00000000
    and then:
    sudo dscl . create /Users/accountname UserShell /bin/bash
    Replace "accountname" in the commands above with the missing account name.

  • OS X 10.9.2 Guest User Account keeps showing up even though it is listed as 'off' in Users & Groups

    Hi all,
    This problem just happened these last 2 days, and I believe it started after the itunes 11.2 and camera raw 11.2 update on 16 May 2014.
    The "guest user" login keeps appearing in the Login screen, i've checked the status of it in my 'System Preference / User & Groups' in 2 Admin accounts, both lists it as 'off'.
    I've tried enabling it, restarting, disabling it and restarting my macbook pro, but the guest user account just stays on the login screen.
    Could someone please help me out on this? thank you for your kind advice and help!

    Hi Esquared,
    Nope, Find My Mac is not activated under my iCloud settings. Checked both Admin accounts, both are unchecked.
    I did see this article before, but some of the steps, specifically the one in System Preferences / Security & Privcy / General is not applicable for OS Mavericks.
    Thank you for the tip, but sadly the guest user account somehow is still active.

Maybe you are looking for

  • Photoshop Elements for Windows 8

    I bought Photoshop Elements almost 10 years ago, it worked well even with Windows 7. Now I got new PC which has Windows 8, tried to install from CD but couldn't make it. Is there anyway to update my Photoshop Elements or do I have to purchase new ver

  • IPhoto and iDVD project is missing

    I recently worked very hard on an editing problem for a friend and (since I am new to macs) noticed that there isn't a save tab on the iPhoto menu, this was not a problem though as I noticed that when I reopened iPhoto all of my worked was saved. I w

  • Running out of memory after latest update

    First of all: Why doesn't anybody answer my questions from Dez. 26th?? They are not that hard, I believe... After I installed the update No. 5, my system runs out of memory after a certain time. I'm working an an 1,7Centrino with 1GB memory.... Is it

  • What is the best preferrence setting for Photoshop CS5 64 Bit Extended?

    I upgraded my PC a few months back and I'm currently running the CS5 suites.  A few weeks ago I started having issues with the CS5 suites freezing up and in some cases even crashing on me.  I always run Illustrator, Photoshop, Indesign and bridge at

  • WD:ABAP  change lead selection

    Hi all, I  need to change the lead selection according to a particular table column.  The lead selection is set to the first row of the table.  The table has some input fields which already contain values.  If the user changes the value of the input