Finder will not search network drive

I am connected to a network with my MacBook Air running Mountain Lion and when I attempt to search for a file on any of the network directories, Finder indicates it is searching, but no results are ever produced.
Sadly, today I started up an old Windows laptop, went into Explorer and within seconds was able to find the document.
Why won't Finder work on a network drive?

The folder is not indexed by Spotlight. Open the Spotlight preference pane and check the Privacy settings. If the folder, or a parent folder, isn't listed, add it to the list and then remove it to rebuild the index.

Similar Messages

  • Finder will NOT search current folder

    I've searched online and the Apple Community for an answer but none correct my problem. 
    My Finder window will NOT search the current folder.  I have gone into Finder Preferences to ensure that SEARCH CURRENT FOLDER is chosen.  It is.  I have rebooted my computer and Finder, cleared the cache etc to no avail.  iMac 10.7.5 and  Macbook Pro  10.7.5
    These are the instructions I'm following, which require a search on sub. 
    http://www.webtechgadgetry.com/2013/12/mac-osx-tip-add-icloud-photo-stream-finde r-sidebar/
    ~/Library/Application Support/iLifeAssetManagement/assets/sub
    When I type CMD + F, I only get a search on whatever folder was selected at the time I searched, not sub.  Ugh. Worked perfectly on my Macbook Pro.  Not so much on my iMac. Thanks in advance for you assistance. 
    Picture below:  Go to folder search
    Next Pic: Search above finds sub folder and it is highlighted.
    Next Pic: After  CMD + F, You can see in the search bar, SUB is not shown. 

    The folder is not indexed by Spotlight. Open the Spotlight preference pane and check the Privacy settings. If the folder, or a parent folder, isn't listed, add it to the list and then remove it to rebuild the index.

  • Finder will not detect hard drive; disk utility will

    Finder will not detect my hard drive.  Disk utility will, however, it will not eject the harddrive from the computer.  Any help?
    I have a lot of files on it, so I would not be happy if they cannot be retrieved.  It has been working for the past 2(?) years without much issue.

    SilverSkyRat wrote:
    Have you checked the manufacturer's web site for any firmware updates for the drive?
    In Disk Utility, select the drive and click Repair Disk. If any errors are displayed, rerun Repair Disk until no errors occur.
    You can't run repair disk while booted from the disk to be repaired.
    Boot from Recovery, then run Repair Disk.

  • Windows 7 will not recognize network drive on airport extreme

    Good day.  I created a network drive using a WD my book 1tb hard drive.  I formatted it to fat32.  Windows 7 does not see the hard drive, but the WD software can find it and the apple extreme router can also see the hard drive.  Any help would be appreciated.  Thanks

    Hi 2pfspiff,
    To verify if you can connect to the drive at all, you may want to try to manually mount it from the Windows machine. The following article has some generall steps for mounting an Airport Extreme USB hard drive under XP and Vista, but the steps should be similar under Windows 7.
    AirPort: How to mount an AirPort Extreme USB hard disk volume in Mac OS X and Windows
    http://support.apple.com/kb/ht1331
    Cheers,
    - Brenden

  • Finder will not search certain hard disks

    Hi Folks,
    I have two Drobo storage devices connected to my My MacPro. Both are running with the same formatting "Mac OS Extended (Journaled)". I can search one of these disks but not the other. Any ideas?
    Thanks in advance,
    Charles

    ChuckSpade wrote:
    this prescription does not work
    Too bad, but there are other methods of rebuilding the index. See
    <http://www.thexlab.com/faqs/stopspotlightindex.html>

  • I have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

    i have a external hard drive connected, Finder will not let me search for files in the external hard drive how do i search in a hard drive

    What are you using to search? You should be able to search any drive in from the Finder. If you're having trouble, try "EasyFind" from the App Store (free). You can search any volumes with it.
    Clinton

  • My wifi will not detect networks and will not search for other networks when I search for them. Do I need a new iPhone or can I fix it myself?

    My wifi is on and when it tries to find a wifi connection, the gray little circle just keeps spinning and will not detect our home wifi. I have tried to search for it and connect to it manually, but it will not search for the network name. I'm hoping I don't need a new phone so please help.

    The following may have something that will help: http://support.apple.com/kb/TS1398

  • Limit Finder to only search the drive selected in Sidebar?

    Hi, How can I get Finder to only search the drive selected in Sidebar?
    I've been given a CD with lots of pictures on it, organised into 20 folders with further sub-folders. I KNOW there is a movie in there that I need to put in my presentation.
    I select the CD drive in sidebar and type .MOV into the search widget. Finder then returns all the .mov files on the HD.
    I just want to quickly scan through the .MOVs on the CD. Is there a way to do this?

    After you enter your search term and the search results window is open you will find a tab bar in the window. Click on the CD tab which will then present the results for the CD instead of your hard drive.
    Spotlight defaults to the startup volume until you click on the tab for the desired drive, folder, etc. It's aggravating, and it's been reported to engineering. So far the behavior has not been "fixed." Maybe in a future release of OS X.

  • I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

    I installed Elements 12 because my version of Photoshop (CS5.1) is not compatible with Yosemite. Now the Adobe Application Manager will not search for updates for any of the programs in CS5.5 that I have. How do I fix this?

    '''Except 8.0.x version also supported version is 3.6.24 '''you can find it here:
    http://www.mozilla.org/en-US/firefox/all-older.html
    check the system requirements:
    http://www.mozilla.org/en-US/firefox/3.6.24/system-requirements/
    see also:
    [https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox Installing a previous version of Firefox]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • Nothing works - no icons on desktop, finder will not open, etc.

    I am running OS 10.4.7, and suddenly, nothing works. Finder will not open. iTunes will not open. Trash will not open. iPhoto will not open, etc. The only programs that seem to open are Safari and Mail (though Safari crashes if I try to watch any video, as Quicktime will not open). Moreover, all of the icons on the desktop have vanished, along with the info bar up top. Spotlight will not open either. I can't access the hard drive directory. Any suggestions? Or, should I just take it into the shop?
    Thanks.

    Hi, WillhelminBend. Welcome to the Discussions.
    1. What changes did you make to your Mac, if any, before this problem arose? If the problem arose after making a change, it's possible the change is the cause.
    2. See my "Multiple applications quit unexpectedly or fail to launch" FAQ for advice on troubleshooting this issue.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Finder does not show flash drive but it is mounted.

    After reformatting a drive to FAT it was automounted to the /Volumes directory. I checked and it is there with all of the content there. Disk Utility also is telling me that it was mounted. The weird part is that the Finder does not have the drive in its sidebar. What else is weird is that other drives come up in the sidebar. Reformatting the same device and changing the volumes name will make it come up.
    How can I make it show up in the finder?
    Is it possible that I somehow blacklisted volumes with that name?

    keeler1 wrote:
    its not on the desktop. I have Finder not put the drive icons on the desktop.
    well then turn that option on temporarily in finder preferences->general.

  • Windows 7 64 bit will not recognise network adapter!

    Windows 7 64 bit will not recognise network adapter!

    You have an older Mac that has 32-bit EFI
    you need to use Windows 7 32-bit or modify the DVD.
    Select CD-ROM Boot prompt
    Stuck at Select CD-Rom Boot
    Hint: Windows 7 SP1 update will need 8GB free space. Windows takes at least 16-20GB. Add in page file, hibernation (each size of physical RAM). Plus any programs and data you store. Cache and temp files (1-4GB) and you get the idea. you will find you can't even login to the sytem. Seen it happen.
    old wives tale: double your best guess for how much RAM, disk space, whatever, to get a more realistic.
    REMOVE the partition using BCA and create 40GB, being sure to leave 20GB free for Mac OS X volume also.

  • My Firefox will not search for websites

    My Firefox will not search for websites etc. I put in a parameter and it will not do anything. When I use anything else (such as Yahoo! search) it works fine. I type in a word/website/name etc. into the search box on Firefox and nothing happens. I have tried uninstalling and reinstalling Firefox and still it won't work.

    A few notes for the morning:
    (1) If you used the Reset Firefox feature, a folder will have appeared on your desktop named Old Firefox Data. Please retain that folder so you can revert your Reset if needed.
    (2) I don't know why you would intentionally open the IP addresses of servers that have demonstrated their untrustworthiness by relaying spam to you. If you want to find out who controls a server, you can look it up on one of the regional registries for IP addresses:
    * RIPE (for Europe): http://www.ripe.net/ (RIPE Database search box mid-page)
    * ARIN (for North America): https://www.arin.net/ (Search WHOIS upper right)
    * APNIC (for Asia): http://www.apnic.net/ (Whois Search to the right of the image)

  • FF4 home page will not search.

    Having just upgraded to FF4 I find that it will not search anything from the Mozilla home page. I can open bookmarked sites or use the search box in the toolbar.

    Do you have that problem when running in the Firefox SafeMode?<br/> ''A troubleshooting mode.''<br />
    1.You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut. <br />
    2. Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.''
    If not, see this: <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • HT2470 My Finder will not open. I cannot access any of my inforamtion that is stored on my computer. Not even on websites that i need pictures for. How do I fix this?

    My Finder will not open and i am on an iMac. I cannot see any of my information please help. I need my documents for websites also.

    Launch the Console application in either of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Enter the name of the crashed application (Finder) or process in the Filter text field. Post the messages from the time of the last crash, if any — the text, please, not a screenshot.
    Step 2
    Still in the Console window, look under User Diagnostic Reports for crash reports related to the process. The report name starts with the name of the crashed process, and ends with ".crash". Select the most recent report and post the contents — again, the text, not a screenshot. For privacy’s sake, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)

Maybe you are looking for

  • Creating a new object at runtime

    What I want to do is dynamically change the name of a object everytime I create a new one, what I mean excatly is like make it so that I can some how increment a value of a variable and apply it to an object anme... so I get something like this objec

  • Need phone to get 4G SIM?

    I'm sure this has been answered, but I can't find it: I have a 4G phone on the way from a private party; my current phone is a 3G Incredible 2.  I understand that the new phone will need a 4G SIM, and that I can get one for free from a corporate stor

  • Error,Info Object 0CHNGID is requested.

    Hi All, I am new to BW/BI, and i am trying to upload data from flat file to BI system; I have uploaded the data successfully into PSA and then into InfoCube; But when i am trying to display the data in the cube i got some 4 errors, i managed to remov

  • Problem when update column

    Table desc temp_agent_address Name Null Type -------- OLD_LINE1 VARCHAR2(30) OLD_LINE2 VARCHAR2(30) OLD_LINE3 VARCHAR2(30) OLD_LINE4 VARCHAR2(30) POSTCODE NUMBER CLEANSED_LINE1 VARCHAR2(30) CLEANSED_LINE2 VARCHAR2(30) CLEANSED_LINE3 VARCHAR2(30) CLEA

  • Disconnect/remove PSTs from users profile with logging

    Hi all, I would like a script that removes (but does not delete) all PST files (except Sharepoint lists) attached to Outlook on a machine (for all users) with logging. I found the script on another site but I would like it to create a log file which