Finder window does not refresh under yosemite

I have a weird effect on my rMBP with the latest Yosemite:
Very often (not always) when I save a file from an application an open Finder window to the save location does not refresh. The new file is not shown! I can go in with Terminal and everything is fine, the file is there. I can edit its contents (eg. with vi or pico) and I can rename the file. However the Finder still does not show it. Not even closing and re-opening the folder help. The only way I found is to create a new folder and immediately delete it. That forces the Finder to update the window. It looks as if the Finder does not get *some* update events.
I do have XtraFinder installed, but deinstalled it and even after a reboot nothing changed, Finder still does not refresh its display. I cannot tell exactly when this started, but incidentally I run an update some days ago and installed Server 4.0.3 and upates to the latest Pages/Keynote/Numbers (however I do not use those, I am still and will stay with iWork'09).
I use Server on a MBP with dynamic address because I needed virtual domains for local testing, nothing really "serverish". It just provides a nice GUI for easy setting-up of virtual domains.
Any ideas? What can I do?
Thanks
---markus---

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Similar Messages

  • I'm using a fresh install on 10.10. why when i click the finder icon in the dock a finder window does not open?

    i'm using a fresh install on 10.10. why when i click the finder icon in the dock a finder window does not open?

    ok, i forced quit the finder, and now when i click on the finder it opens a visible window... where did this bug come from?

  • Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Mac Book Pro just got it, all was well for 2 weeks now Finder window does not fill whole screen, there is an 1 1/2" space of black on the right side and the Finder window had a 1" section that flipped like a rolling tv now it is a white bar! Help!

    Bad video card, call Apple, get a case number and return it.

  • Finder window does not open when dock icon is clicked

    Hi would like some help
    When I click the finder icon in the dock nothing happens, the only way I can get finder open is to go file>new finder window
    just started doing this 1 day ago ?
    thanks

    Have you got an instance of finder open in another desktop? If you right click on the finder icon you can show all windows, then close any that are open. Failing that relaunch finder, if you click on the Apple in the top menu bar, go to force quit, and select finder, then relaunch it to see if it solves your problem.
    I once had this problem when I had left a finder window open in a connected tv screen, disconnected the tv and had the same problem of not being able to open finder normally.

  • Finder window does not come forward when icon is selected in tray

    This happens sporadically with Finder mostly and most recently with Illustrator.  I frequently copy and paste and move between several programs in preparing a presentation. I will have multiple programs open and when I click on the icon in the tray nothing happens. What should happen is that program moves on top of the other open windows. When this happens I have to manually move that window to the side or use the function keys to find the window/program I need. This requires jockeying around several windows to reposition them and having to repeat the dance each time I want to move between programs.
    Is this a glitch or bug or am I doing it wrong?

    Have you got an instance of finder open in another desktop? If you right click on the finder icon you can show all windows, then close any that are open. Failing that relaunch finder, if you click on the Apple in the top menu bar, go to force quit, and select finder, then relaunch it to see if it solves your problem.
    I once had this problem when I had left a finder window open in a connected tv screen, disconnected the tv and had the same problem of not being able to open finder normally.

  • Preview in Finder windows does not work with VLC Player

    hi there,
    i am using vlc player, and whenever i access a folder where i have many avi folders that vlc player is set as the default program to open them, the finder windows freezes and i have to relaunch it. also, when i click on get info for a particular avi folder, finder crashes again because it cannot preview the file in the window. does anyone know how i can resolve this issue?
    thanks!

    paranoidandroid60 wrote:
    ok, it works fine with quicktime, but anyone know why vlc player might be doing this?
    thanks!
    I use VLC and there are some bugs with the latest version. Try an earlier version. WIth VLC, I keep the older versions for things like this.
    For instance, the new VLC give the wrong time on a stereo audio file. In fact it gives double the correct time. I have had some other issues with VLC, but it's easy enough to remove and install.
    If you make QT the default and then right-click the video and select VLC to play it, does that work?
    Also check out:
    http://forum.videolan.org/viewforum.php?f=12&sid=7bc9db9ba2aa53d4660133d4b9e3dbb 8
    Message was edited by: nerowolfe

  • Finder Window Does not retain custom size and/or view

    I recently installed OS X Snow Leopard and ever sine I have had problems with the behaviour of my finder windows in that they simply will not retain my custom view settings.
    +For example, I set the default view to coverflow with a 50/50 ratio of coverflow (on top) and file lists (on the bottom). But as soon as I click to another location, close and then reopen any finder window, at any time, the result is always the same - the window opens in coverflow with the coverflow graphics taking up around 90% of the window space and the file lists underneath squeezed down to minimum size. Even if I set all windows to open in icon view or list view, the same thing happens.+
    *I have tried all of the following:*
    Opening a finder window, resizing, and then closing it straight away
    Deleting the both the finder and the side bar plist files, emptying the trash and then restarting finder
    Restarting finder on its own
    *Is anyone having the same problem and if so have they found a solution?*

    This problem affects a few of my Finder windows, including the Application folder window. I recently did a clean reinstall of SL (which stands for Stupid Lunatic, because that's what I was for upgrading), and the problem occurred a few days later. This cannot be due to using Migration Assistant (and moving "bad" folders), because the installation process creates the Applications folder and populates it with Apples apps. Migration Assistant just adds your apps to the existing folder.
    This problem, or minor variations of it, has occurred with all seven major versions of OS X. Finder window settings were rock solid way back in OS 7 days and remained so through OS 9. I know that Steve Jobs hates the Desktop/Finder approach, but if it's going to be in OS X, then it should work correctly. I actually long for the days when rebuilding the desktop fixed most of the icon and window problems.
    We need a utility that can erase the custom settings for our folders and let us start with a clean settings file.

  • IPhoto does not work under Yosemite

    I just installed Yosemite and iPhoto does not seem to be working. It says that I have to update iPhoto and that I can search for the newest version in the app store, however, once I try to update and enter my Apple ID and password, nothing happens?

    and that I can search for the newest version in the app store, however, once I try to update and enter my Apple ID and password, nothing happens?
    Which version of iPhoto do you have?
    If your version of iPhoto is not an iPhoto '11 version but iPhoto `09 or earlier, you cannot update iPhoto but need to buy the upgrade.
    In that case   go straight for the "Featured" tab of the App Store, enter iPhoto into the search field and buy iPhoto 9.6.

  • Finder window does not open

    This has start happening this week. I am using OS 10.7.5 on a Mac Pro desktop. When I click on the Finder icon in the tray nothing happens. I might have one or more finder windows open but none of them come forward when I click on the icon. I have to use Command+Tab to rotate through any open programs to get the Finder window. And it is only the Finder that this happens with.
    Is this a glitch native to my computer or is there a box to check or uncheck that I have inadvertently toggled?

    This has start happening this week. I am using OS 10.7.5 on a Mac Pro desktop. When I click on the Finder icon in the tray nothing happens. I might have one or more finder windows open but none of them come forward when I click on the icon. I have to use Command+Tab to rotate through any open programs to get the Finder window. And it is only the Finder that this happens with.
    Is this a glitch native to my computer or is there a box to check or uncheck that I have inadvertently toggled?

  • My finder window is not refreshing after a file is deleted

    I open up a new finder window so that I can sort through and delete items from the desktop. After I delete a file, the images displayed in the top of the window no longer match the items that are left.

    Might be Finder preferences are corrupted ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.finder.plist
    Click Go then move the com.apple.finder.plist file to the Trash
    See if that made a difference.

  • Can't find "Does Not Contain" under CACS Attribute drop-down list in CACS

    when using CACS function, I couldn’t seem to find the “Does Not Contain” under CACS attribute drop-down in CACS Constraints Tab.
    I could only see “Known to Contain”, “May Contain”, “Country of Origin”, and “Complies With”
    does anyone know why?

    "MNC" is match with "Does not contain", but the label name is not correct. We already have internal bug to track it.
    Thanks
    Huiping

  • Finder window doesn't refresh

    Dear all,
    When I login into a Windows Server 2003, Mac OS X (and for that matter Mac OS 9) Finder windows do not refresh as fast as we would like them to. It takes me about 10 minutes or more. I have to close out of, or collapse if in List view, the window, and reopen it to force a redraw.
    Please help.
    Thanks
    Mac Mini 1,4   Mac OS X (10.4.3)  

    Hi everyone:
    I'm having similar problems like this too. Using my iMac running OS X 10.4.6 and accessing a shared folder located on my Win XP PC.
    Any ideas/suggestion anyone would be helpful..!
    Intel iMac   Mac OS X (10.4.6)  

  • Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP.  I am loathe to upgrade to Windows Vista/7/8 just yet.  Can I obtain and use an earlier version of iCloud Outlook Add-in?  My iPad II synchronizes!

    Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP.  I am loathe to upgrade to Windows Vista/7/8 just yet.  Can I obtain and use an earlier version of iCloud Outlook Add-in?  My iPad II synchronizes!

    There is no 'earlier' version that supports XP. iCloud launched with Vista/7 support only.

  • In OS Yosemite the search function in Mail, Finder, Spotlight- does not work

    MacBook Pro (Retina, 15-inch, Late 2013)
    2,6 GHz Intel Core i7
    16 GB 1600 MHz DDR3
    NVIDIA GeForce GT 750M 2048 MB
    OS Yosemite,
    Finder versión 10.10.1
    Mail Versión 8.1 (1993)
    In OS Yosemite the search function in Mail, Finder, Spotlight… does not work. Messages or documents with the search criteria are there and one could find them manually, but the search function fails to find them. Following advice from Apple Support (728965377):
    1. I applied an Apple protocol for adware removal (Remove unwanted adware that displays pop-up ads and graphics on your Mac); I had none, because I had formally utilized a similar protocol that I had found in Internet, actually an app that implemented automatically Apple's adware removal protocol.
    2. I rebuild the post boxes in Mail (Mail (Yosemite): Reconstruir buzones); It took a while but it functioned properly
    3. I re-install the System (OS X Yosemite: Reinstalar OS X); It took about 4 hours but there was no problem whatsoever with the installation.
    Afterwards I searched for messages in Mail, and documents in Finder and Spotlight, without any difficulty. The search function in all of them was working properly. But the next time that I needed to search messages or documents, an hour later or so, the problem reappear and a couple of new issues occurred:
    1. in app RagTime 6.5.2 (Build 1821), www.ragtime.de, the menu bar disappears (it is invisible), when one performs certain operations, e. g., calculating a value with a formula, whether it is in a spreadsheet or some other component (text, drawing, etc.). After touching with the cursor the menu bar is visible again.
    2. after reading an e-mail in Mail or copying an address, this is seeing as a floating object in the finder and over every application. There is no logical way to get rid of the floating object and neither copying or deleting or cutting it. It is not a big issue but nonetheless bothersome.
    3. In Mail, messages with Flag or in VIP contacts cannot be seen in the appropriate folders, only in the Incoming mail folder, together with other messages. It seems to me, this issue is part of same search function problem.
    4. The preview function within Mail does not show the attached documents to a message, whether it is in the IN, OUT or Draft boxes.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Click the Clear Display icon in the toolbar. Then try again to re-index Spotlight. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name or email address, may appear in the log. Anonymize before posting.

  • Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop CC2014 running under window 8.1.  How do I access mini bridge.  It does not show under FILE or WINDOW-EXTENSIONS.  Works ok with CS6

    Photoshop: Spring Cleaning | PHOTOSHOP.COM BLOG

Maybe you are looking for

  • How to launching a perl script by the "begin" script of a jumpstart

    Hi all, i have an urgent pb with my solaris jumpstart, let me explain to you : i want that the begin script launch some perl script, but i have a problem here is my "begin" script: echo "Begining ISO FLAR based jumpstart." echo "" echo "Starting Ulli

  • Reports in PS--- very urgent

    Hi folks i just wanted to know that whr can i pull up the SAP Standard report for any Project in PS, in whichi can fined actual/budget/variance value in US$ and CAND together. pla show the menu path or give T-Code for that. Thanks

  • Vertical One Row Report

    Hi Everyone, I am trying to implement a SQL report and want it to be as Vertical One Row. I've found one solution which would work perfectly for me in here: [http://apex.oracle.com/pls/otn/f?p=11933:108] It displays one row at a time and it is vertic

  • Can you drill to an xmlp report from a query or xlmp report?

    Within PeopleSoft Financials 9.1 (people tools 8.51) is it possible to create an expression to drill down to an xmlp report? I have two reports, summary and detail. Each report has its own source query. Within the summary query I added a drilling url

  • Can't create DTP for cube migrated from business content to 2004s

    I am in the process of converting 3.5 Business Content InfoProviders to the new model for 2004s. Master data was not a problem, but I’m having a hard time getting InfoCubes to migrate. I installed 0PUR_C03 from Business Content and replicated the Dat