Finding a scene/shot for a image

Hi all
I have a JPEG image(frame from a video). I need to scan the video and find the scene corresponding to the image and only the scene has to be played back. Please provide me with some suggesstions as to how this can be implemented. Does JMF provide any support to perform this?
thanks in advance
with regards
kokila

Hello, I had the same problem on my Ideacentre K330, which includes de ATI Radeon HD 6450, which is very underpowered to play Call of Duty WAW. I looked for advise and finally decided for XFX Radeon HD 5670 with 1GB of DDR3 RAM. There is a version with DDR5, the cost fluctuates between $70 and $100 if you but it via Amazon, depending on brand and memory type (ddr3 vs ddr5).
My experience has been that this card plays nice with the 280W PSU, it does consume a little more power than the former video card, but it is much more powerful, Windows 7 index performance experience jumped from 5.0 to 6.8!
You will notice a little more heat when playing hard, but nothing critical, and it does not happen during normal operation (watching movies, browsing, etc). Whatever the case, this video card does not disrupt the cool and silent operation of the Ideacentre K330, I suspect it will be the same for your PC.
You may also consider the Radeon HD 6450, it would be an enhancement considering your actual graphics setup, this video card cost less and operates very cool and silent, but you will be dissapointed when playing heavy games like call of duty.
BTW, the OEM version of the HD 6450 included in my K330 is a skinny, trimmed down version of the commercial product, looks like custom made for Lenovo's PCs I guess. The commercial version may be more power demanding than the OEM.
Hope it helps.
Martin

Similar Messages

Where can I find the filename list for iOS image Default.png ?

I have a really hard time finding where information is scattered on Adobe. Does anyone know the definitive list of supported Default image filename for iOS publishing?
Here is what I was using previously to support up to iPhone5 in portrait orientation:
Default.png
[email protected]
[email protected]
Default-Portrait.png
[email protected]
I'd like to add iPhone 6 and 6+
thanks

Up until now, I would include these images for a landscape only app:
[email protected]
Default-Landscape.png
[email protected]
Default.png
[email protected]
The Default-Landscape.png would appear on non Retina iPad, and would be correct whichever way you held the device. Likewise [email protected] would do the same for Retina iPad.
According to your article, Default-Landscape@2x doesn't exist any more, and Default-Landscape is now specifically for Landscape Left.
Is this correct, or can we continue to only have Default-Landscape & Default-Landscape@2x?
My guess/hope is that the article is wrong, and that there is both a Default-Landscape@2x still, and a Default-LandscapeLeft, and that Default-Landscape is not specifically for Landscape Left.

I'm editing a wedding that I shot for a family member but when I play it in the viewing window the top of it is cropped off but I can see the whole image in the project strip. will the whole image transfer when I make a dvd or will it crop the top ?

I'm editing a wedding that I shot for a family member, But when I play it the top of the image is cropped off in the veiwing window but it shows the whole image in the project strip. When I make a DVD with it transfer the whole image or will it be the chopped off image and how do I make sure it is the whole image ?

What version of iMovie are you using?
For 9.09..
If the image is not 720p, you might have to crop it to have freehand control over which bit gets cut off.
How to crop it...
In the project window hover your cursor over a section of the clip in the bottom right corner as seen below:
Click on the cog and open up Cropping,Ken Burns and Rotation.
Click on Crop and drag and set to where you want it to be cropped, then click Done. (Because mine isn't 720p, iMovie automatically makes it so I cannot include the black border. If you do not mind this click Allow Black.)
Glad if this helped! Please rate up.

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open. Similary, if I scan an image and sa

I've been taking screen shots for years and opening them from my desktiop. Suddenly, today, I've lost the ability to open them. I can right click on the picture and do "quicklook", but that's it. They just won't open.
Similary, if I scan an image and save it as a PDF file in pictures, I'm suddenly not able to open it either!
Why?

Move the com.apple.screencapture.plist file out of /username/Library/Preferences/ to the Desktop, log out and back in, and try again.
BTW, use the default 10 point setting for text. Your choice just wastes screen space.

All of a sudden the screen on my iMac 10,1 is too small for the image. Can't figure out how to reduce the size of the Finder or any of the Apps.

All of a sudden the screen is too small for the image. Hard to explain, but in order to see the entire Finder window, I must scroll the image up/down, left/right.
It's not just the Finder though, all of the apps are affected this way too.
It's probably got something to do with the fact that I have an HDMI cable running from the Mac to a Vizio 42" TV. It's been running this way just fine for over two months though.
Any ideas?

You probably accidently zoomed the screen. Hold down CNTL while scrolling down with the mouse or trackpad to unzoom. Cntl - scroll up to zoom.
Regards,
Captfred

How do i find or replace the missing disk image for my HD

How do i find or replace the missing disk image? for my HD ........as it is missing when i try to back up with time machine,
i asked for assistance the other day with time machine
now i have worked out this is the reason i can not back up with TM, due to no disk image in my portable hard drive
I saw a post on youtube where it explains you can copy a your HD disk imag from your time machine back ups enabeling, time machine to back up
But i can not find where the TM Back up driver is situated in my TM Back up's
Some advice would be greatly appreceate as i am rather new to Mackintosh
Thank you
Aiden

Hi again.
Just re-reading your first post, I wonder if you're confusing a disk image backup with Time Machine?
It's certainly possible to create a disc image of your Macintosh HD and copy it to an external drive.
However, as a backup that method has a drawback; you can't boot from a disc image directly. It needs to be mounted on a bootable system before it can be used. So it's not really much use if the internal HD fails, at least as far as allowing you to carry on working while the repair is carried out.
Much better (and simpler) is to clone the whole drive to the external using CarbonCopyCloner or SuperDuper (there are plenty of others, but those appear to be the most popular).
That will give you a bootable backup which can be kept up to date by incremental backups using the same applications.
In the event of total internal HD failure all you need to do is replace the drive then boot from the clone and reverse clone to the internal to get up and running again.
Many of us use both a bootable clone and Time Machine (on seperate drives) as each has it's different uses.

When searching for an image in Finder on iMac, I found hundreds of images of printers !! All sorts of printer images which I certainly haven't loaded on.I went to Finder, File, Find and Image and there they are, hundreds,if not low thousands of them.

I was searching for an image on my Imac and when I went to Finder,File,Find and then Image, I found hundreds if not early thousand images of printers ! Amazing in one way but I didn't put them on my machine and don't really want them there.Did they come pre-loaded? Can I delete them safely? Thanks

Almost certainly, no absolutely not once you start deleting stuff like this that you think is not needed, eventually you'll trash something essential and cause yourself a lot of heartache.
There are numerous files classed as images, some will be temporary files in browser caches, others system files, others your "real" images, others files which are not really images but appear to be.
The amount of space of what I presume are essentially icons of printers will will be minimal, lets say these images are 5k in size (I guess they are much smaller?) and there are 1,000 of them, thats only 5Mb. No doubt your disk has multiple gigabytes free, eg thousands of times as much free as you'd save by deleting all of them. So you might gain back an extra 0.0001% disk space*. NOt worth the time, let alone the risk, plus then you'll get into a mindset "hmm, I dont think I can possibly need this 23byte file either I'll delete that as well etc, and then "problem......".
Where are the images stored? It may be that at some time you were searching for a new printer and these images are from that exercise (though I doubt you looked at thousands?) in which case they are in your browser cache and you can always delete that through the browser, but that space will be overwritten by other images anyway.
"If it ain't broke, don't fix it" is a motto to work by with computers.
*( or, if you really do need the (say) 5MB of disk space back because you are running out, this would only be a very temporary solution and that wont have done you any good)

Where can I find the instructional manuel for Power shot A1100 camera.

Where can I find the instructional manuel for Power shot A1100 camera.

http://gdlp01.c-wss.com/gds/6/0300001856/01/PSA1100IS_CUG_EN.pdf

What is the Search for:- All images/All documents/all movies for in Finder

I am confused as to the purpose of Search for:- All images/documents/movies in Finder. I seem to have documents, pictures and music I have never seen or downloaded, and often photos I have actually downloaded are copied in triplicate sometimes more. I have at times got 10,000 items in my documents in Search for? My worry really is does this all take up memory on my computer and if so why is it happening and how do I stop it?
I do hope someone can explain the purpose of the Search For?
Jai309

Thanks Kappy, I had thought that is what it probably was but just confused by all the items I never searched for or downloaded. Now that I know it doesn't take up any memory I shan't worry about it. When I deleted everything from the search for files all the photos in my iphoto and documents were also removed. (thankfully I always have my stuff backed up on hard drive) I guess one just shouldn't remove them? Is there a safe way to clear it out without loosing the stuff I need to keep?
Regards
Jai309

Finding a Gif Encoder for Java Advanced Imaging (JAI)

I'm trying to find the GIF encoder for Java Advanced Imaging. I keep reading all over the place that there is one, but for the life of me I can't figure out where it is supposed to be. Could anyone please enlighten me?
Thanks

After I installed this, it still doesn't report gif as a possible encoding type:
String[] codecs = ImageCodec.getEncoderNames(img, null);
            for (int j = 0; j < codecs.length; j++) {
                String codec = codecs[j];
                System.out.println (codec);
            }only reports the following types available:
pnm
jpeg
tiff
png
bmp

Can't find the camera move behavior & 3D scene icon for the camera

Since a couple of days I've been playing around in the 3D environment in Motion 3.0.1
Unfortunately I can't find the (official) "camera move behavior" as used in the templates with comes with Motion 3. This particular behavior must be used to animate camera moves as far as I understand.
Furthermore I can't find the 3D scene icon for the camera. By having this representation of the camera it would be a lot easier to follow what the camera is looking at along it's motion path.
Thanks in advance for your help. . .

Hi gents,
First of all thanks for your input!
I've found the solution for my missing 3D camera icon.
When I'm in (3D) perspective mode I found out that per default Motion doesn't show the camera icon.
I've to zoom out of the 3D scene to actually see this camera icon. As per default the view is inside from a gigantic camera, which is only visible when I zoom out.
Furthermore I understand that I can animate the camera via it's own transform properties. But I was just wondering where the camera move behavior as used in the templates with comes with Motion 3 came from.
Thanks and have fun over there!

How can I find out the dpi of an image in Acrobat.

How can I find out the dpi of an image in Acrobat. I have tried the pre-flight option but I really don't understand the pixels width x depth information that I get. I basically just want to know at dpi of a single image. Is there other program that will read my pdf file and tell me this information.

Thank you, tylerdurdain! That was ridiculously difficult to find. Not sure what version of Acrobat you're using in your image, but for those using Acrobat Pro 11 (in Mavericks), it's buried under View > Tools > Print Production.
That opens a panel on the right.
To keep from having to chase it down this way each time, right click on "Output Preview" and choose "Add to Quick Tools Toolbar". That adds a button to the top right of the toolbar.
Now you can call up the inspector with one click. Choose Object Inspector as tylerdurdain shows above, then click on the item displayed to get its properties.

Is there a way to use a single bitmapdata for multiple images with GPU mode?

With GPU mode is there a way to bring in a single 1024 X 1024 png containing all my sprites and then slice it up into multiple display objects all refering to the original BitmapData?
I have an app that runs in GPU mode - but I want to optimize the image management.
I am making three sets of images in the orders of 2048, 1024 and 512 px.
The app is a book app and each page has around 4 to 5 bitmaps. I would like to bring in one single image and slice it up - but just refer to the original bitMapData in the memory.
Is there a way to do this - e.g. using a masking technique?
I think it is possible using textures in direct mode - but that is not an ideal solution for me - as the app is already in the appstore - and I would have to entirely refactor it for stage3D. Also I use very large bitmaps which have some masking animations applied to them dynamically: http://youtu.be/Nm0T1jLCTz8?t=42s
Currently, I use jpgs and a jpeg mask file for each image which I composite to get the alpha - then I scale them.
PNGs may be better for GPU - (no compositing) but they make for a huge app file.
Now I am converting it to use diffent sized assets depending on the device, then scaling them if need, and then compositing them for apha. What I was hoping was to find a technique that could reduce the number of bitmapdata objects used and reduce the operations in general.
Any thoughts on optimizing would be appreciated. I can add my code here if it helps.

Tell Apple:
http://www.apple.com/feedback/iphone.html
We're all users here, just like you.

Where can I find detailed, systematic HELP for advanced topics relating to Thunderbird?

In moving from XP to Windows 7, I opted for Thunderbird as email client in order to bypass Microsoft's hyper-intrusive Windows Live Mail (I used Outlook Express for years).
I have a very complicated email structure, and it's taken me weeks (seriously) to learn how to replicate it in TBird. Now I'm trying to customize TBird further, but none of the TBird articles/forum Q&A's/Google searches address my questions.
There is no live tech support for TBird, and I'm just about ready to leave it for good. However -- one last effort: where can I find detailed, systematic HELP for advanced topics relating to Thunderbird?
Thanks.

I am no expert, but I don't know of any authoritative reference as to what elements of HTML and CSS are supported in Thunderbird. However, as I believe you appreciate, it's more than just what Thunderbird supports, but one must also think about what is likely to work in other email clients. Keep it simple. Avoid ancient deprecated tags that other email clients may not support, and for similar reasons, avoid cutting edge technology. Remember that recipients using tablets or smartphones won't appreciate large fancy email documents.
The only thing ''guaranteed'' to work in email is plain text. ;-)
If you haven't already discovered it, the Stationery add-on is designed specifically to support OE stationery in Thunderbird. Your existing stationery may "just work" in this add-on. It makes switching between various stationery templates much easier, but I'm not confident that it will affect interpretation of your CSS or HTML coding.
Your code is at least clean and minimal. Most times my involvement with troublesome templates and signatures centres on the horrible bloat and mso custom code generated by Word or Outlook.
Having said that, you and I are mortal enemies, as I don't have much patience with what you aspire to achieve. I specifically don't like background images, nor being obliged to suffer other folks' bizarre choice of typefaces and colours (but your simple 12pt black Tahoma is quite inoffensive. ;-) ) I'm of an age where my tolerance and eyesight are easily offended.
Nonetheless, I'm intrigued by how to parse the tag for the background image, as it doesn't look like a legitimate pathname to a graphics file. Does the background image actually appear as required?

For a laptop for LR image loading on trips - is 1366x768 screen enough and HDD size?

I have big pc and big screens for editing at home, but for travel am looking for a laptop for loading images on the road and basic LR sorting and tagging while away.
2 questions to get your experiences, forum regulars, about my direction:
1. 1tb HDD with an external 1tb HDD as backup - rather than 256 or 512 gb inboard SSD (reasons of $$$ and also to load all my images on a trip)
2. 14 inch screen with 1366 x 768 or similar rather than full HD ($$$ reasons and becasue I figure I can zoom in to check focus on that screen just fine)
Your comments and experiences?
Oz

It meets the minimum requirements for display size which is 1024 x 768
I use a 15 inch Macbook Pro on the road, so pretty close in size.
You may find this video useful on the subject of working away from base and exporting the laptop catalog into your master catalog when you get back.

Finding a scene/shot for a image

Similar Messages

Maybe you are looking for