Finding all the Purhcase Order if we have the Material Number
Hi Gurus,
In 2009, we set up the Purchase Orders for particular material with standard cost, now in 2010 the vendor has changed the standard cost of the material,however in our books we did not change the standard cost in the PO.
Now we want to change the standard cost in all the purchase orders at once. is there any way to find all the purchase orders against any particular material, so that we can update the Purchase order.Actually we are not aware how many purchase orders have been created for such material.
Thanks
Dear,
Use transaction ME2N and find the purchase order for particular material or material group..
Regards,
Chintan Joshi
Similar Messages
-
My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?
Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB -
Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?
Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :( -
my I phone 4s stop making sounds, I tried reset and still no sounds only vibrate. Did reset - all settings under general and still have the problem, I also re- sync again to see if this help. still no sounds.
Hi there,
It sounds like you have tried a few things already, but you may still find the article below helpful.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
-Griff W. -
Hi, since i put some mp4 video or DVD files on my external hard drives final cut prox won't recognize my hard drives, i move all the video files and the problem still exist. somebody have the solution
Did the back and forth between PC and Mac file systems screw up my files somehow?
Yes. Unfortunately the move has almost certainly caused the loss of the resource data that would have been (invisibly) attached to those files.
By adding a specific .mov extension after the fact you will have helped the Mac correctly identify the file type / asscoiations but also significantly you will have physically changed the filename eg from "clip" to "clip.mov". This means that when you come to reconnect the media in FCP , then FCP will be looking for files that no longer exist at the given path eg when specifically looking for our example clip called "clip" of course it won't find it.
Try this as a test... first remove the ".mov" extension from one or more of the clips, select those clips and press Cmd-Opt-I to open an Info window for the selection. You'll see an "Open with:" popup and in that popup you should choose QuickTime Player (if its a Unix Executable then it will initially list Terminal as the appropriate app, you have to choose Other... then in the open dialog choose Enable > All Applications and then navigate to and select the Quicktime Player app as the appropriate app). After you've done that restart FCP and see if you can now reconnect to those clips. -
My iPad will not update to 5 at all. I don't even have the option of software update in settings. I've tried to update over iTunes and it doest work there either.
If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
iOS 5: Updating your device to iOS 5 or Later
http://support.apple.com/kb/HT4972
How to install iOS 6
http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
iOS: How to update your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT4623
If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily. Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
Cheers, Tom -
Should all memory slots on my imac have the same amount of memory
should all memory slots on my imac have the same amount of memory
For your model, that would mean to match them horizontally; in newer iMacs with vertical RAM installation, they should be matched: slot 1 + 3, and slots 2 + 4 (which, oddly enough, will result in the same picture if your check the RAM in system info).
-
Mac OS 10.5 /
I deleted the " Private" folder ... and emptied the trash. So the folder and its contents no longer exists on my computer at all !!!
I do have the OS 10.5 dvd that i purchased years ago...
But my computer will not start from it on its own.
My question is what is the open source or terminal language code used to tell my mac to look in the DVD rom drive for startup info? I know that im not the only person in this world who has deleted the "PRIVATE" folder and emptied the trash so it no longer exists on their machine...
That said theres gotta be a common fix for a Power PC G4 that has the OS X dvd in the rom drive but wont look to it to reinstall the vital contents of the PRIVATE folder.
Once again there is not a copy of this file or its contents in the recycle bin...
Also rebooting the machine , pressing and holding the letter C does not prompt the machine to look to the dvd rom drive.
I was reinstalling pro tools and figured I would make some room by cleaning my computers HD...
Lol It was a bad choice to delete this file ...
Thanks guysOkay sorry it took forever to respond... But for a while there I gave up on this computer!!!!
Money's been tight lately , so taking it in to a professional was not yet an option... though I did consider it eventhough.
Anyway long story short im glad I didnt spend any money because I already had all the tools necessary to fix this issue but was going about it in the wrong way. Okay so here is my scenario and the breakdown... Though this may not fix the issue for everyone :( which *****... But I know we all will have different circumstances.
Anyway here we go...
Okay so first things first.... Years ago I purchased the OS 10.5.1 disk ... So that has always been in my possession!!!!
I realize that some may not have a disk to reflash your OS to your hard drive... but if you do your in luck.
2ndly ... I had an external harddrive with all of my itunes downloaded music so it was more than okay with me to delete my primary HD because all the important stuff could either be copied over or repathed to be located.
-------If you dont want to read through the whole story the fix is summed up in the bottom section-------
Okay so now the SOLUTION!!!!
By trial and error , and pure boredom I opened up my computer to clean the inside...
AND
"Disconnected the primary HD"
and just because ....... REBOOTED my computer. Just to see what it would do.
Upon restart and though it looked like it would repeat its usual cycle...
About 1 minute in to that process my computer froze for about 2 seconds and flashed to the OS installation screen.
Mind you I havent seen this screen yet... Probably hasnt been since I installed the OS years ago.
After a bit of trial and error...
I decided to tell my computer to startup from the OS 10.5 disk located in my dvd rom drive and restarted once again...
this setting is under
Utilities / startup disk
After a little more trial and error ... I realized that I could reconnect the primary HD , restart the machine and return to the OS installation menu.
So upon this discovery
I went to the Disk Utility located under Utilities
Highlighted my primary HD located in the left hand column
Once highlighted ...
In the heading section on the right I selected the option
Erase
in which I erased My current OS on my primary HD ...
I used the first option in the list under security... Because it seemed like the least invasive and would take the least amount of time to see if this process would actually work.
I FORGOT to add something...
Another reason why I deleted my primary HD!!!!!
I forgot to say that it WOULD NOT!!!!! Show up in the STARTUP list as an option...Even After multiple reboots....
But like clockwork... Once I deleted its name IT SHOWED UP as an option!!!!
So back to the next step...
I returned to the STARTUP option under utilities ... And was then able to see MY primary HD now as a startup option...
But ofcourse it had no name because it we previously erased it.
So when Clicking my newly erased HD ... I was almost immediately prompted to REINSTALL the OS ...
Which said it would take about 57 minutes ... But I believe was alot less...
My issue was resolved ... My computer then stated the install was SUCCESSFUL!!!!!!! :))))))))))) lol ;)
It was like I was setting up for the first time ;) asking for my registration info...
The dilemma of deleting the private folder and emptying the trash is finally over resolved. Done ... and no extra money spent!!!!!!!!!
Its really crazy that the information for such a simple thing is not readily available. Especially being such a simple fix.
I know im not the only person who's had this issue , because i've seen numerous posts with similar wording.
I also know I wont be the last person to have this issue... So I hope this synopsis makes sense.
-------One more time the fix------
*Insert your OS dvd into your dvd rom drive.
*Unplug your primary HD or corrupted startup disk
*Reboot your machine...
Upon restart your primary HD will not be recognized...
* you will then be prompted to select your language.
Once selected
*Click Utilities/startup... Highlight the the selection that refers to the OS dvd located in the dvd rom drive.
* Click restart...
!!!!!!!!!!Be sure to reconnect your Primary HD Before your computer restarts and you hear the chime!!!!!!!!
If you do not replug your HD before the chime it will not be recognized.
In that case restart again.
Upon restart once again
*Choose your language...
*Click Utilities / disk utility
In the left column select and
*Highlight your HD ...
Then towards the top portion / center of the page
*Click the heading Erase
Then on the page toward the bottom
*Click security options
This will then provide erase options.
I USED THE FIRST OPTION
"Dont erase data"...
*click OK
* click erase...
Once erased which should take a few seconds
*Cancel the disk utility...
* Click Utilities / startup
And your newly erased HD should now appear in the list.
* Select your drive from the list by highlighting
It should no longer have a name.
*Once selected, you will then be prompted to restart and install the OS to your newly erased HD...
Thats it!!!!
Once everything reinstalls re-add your personal info or registration info and you are up and running.
Goodluck ;) -
My ipad is no longer showing all my vidoes, even though i have the option set to show all, even those that are in my cloud. Any suggestions??
Close the videos app and launch it again.
To close an app, drag the app up from the multitasking display. Double tap the home button and you will see apps lined up going left to right across the screen. Swipe to get to the app that you want to close and then swipe "up" on the app preview thumbnail to close it.
if they still don't show up after you launch the app again, try resetting the iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up. -
HI, I need your help. How can I delete all data, when I do not have the special security code, which I didn´t remember ? I also think, that I never create this code before. But I cannot put my settings back.
You must remember the code, if you can't then take the phone and proof of purchase to an Apple Store.
-
All of my books in iBooks have the following message: "this page has the following errors: error on line 1 at column 1 document is empty error on line 1 : encoding error..,...". Any advice?
I have the same problem. I've tried to restart my Ipad and downloaded the book again several times but nothing has changed. There aren't any reviews on the book with that problem and I've got the latest version of iBook so I don't know what else I can do to get the book which I've paid for. Does anyone have another idea what I could do? (maybe one of the above might help you, Paul)
Thanks -
How do you geT ICal to print out the To Do Items in the same order as you have sorted them on the screen
Without actually seeing some of what is in the .ics attachment there's really no way to see what's going on.
-
Can match identify my vinyl imported albums in I tunes. Also for it to work will I need to load all the album details. Obviously the iTunes Store needs to have the albums on line
Yes. Matching Songs in Vinyl Albums is possible, usually though with a success rate of 20 - 40%.
Even with great care taken to improve the quality of the recording, the outcome is mixed.
Summary points are here: https://discussions.apple.com/thread/3696878 -
I have a problem - the program QuickTime player longer open files - gororit that codec for the opening of the program at all of the files that I opened have the extension avi. tried to remove a program, it is impossible.I tried to load the program from Apple, reinstalled. but I was wrong still going on! what to do?
before using for all entries in, u need to check whether the driver internal table is empty, if it is empty, u should not enter into select statement.
if u wont use this check means, when the driver internal table is empty, the second select will take all the entires from the tables.
SELECT AEBELN ALIFNR AKNUMV BVGABE BEBELP BGJAHR B~BELNR
FROM EKKO AS A
INNER JOIN EKBE AS B ON BEBELN = AEBELN
INTO CORRESPONDING
FIELDS OF TABLE ITAB WHERE B~VGABE = '2'.
if itab[] is not initial.
SELECT EKPOEBELN EKPOMATNR EKPOTXZ01 EKPOWERKS EKPO~NETWR
EKPOMENGE EKPOMWSKZ
FROM EKPO
INTO CORRESPONDING FIELDS OF TABLE ITAB1
FOR ALL ENTRIES IN ITAB
WHERE EBELN = ITAB-EBELN.
endif.
I hope this will help u.
else,
Sujatha. -
I have new memory modules, 2x2 2GB DDR2 --800 SODIMM MAC to install into I-Mac early2008 ,currently with 1 GB DDR2 SDRAM. How do I find the memory slots ? I have the 4GB replacement modules from Crucial and general instr's., not specific to I-Mac.
https://www.ifixit.com/Guide/iMac+Intel+24-Inch+EMC+2111+RAM+Replacement/5196
Maybe you are looking for
-
IPod doesn't appear in the finder nor on the desktop when connected
Hi, My iPod touch 2nd gen doesn't appear in the finder nor on the desktop when connected, is it normal maybe because its a flash drive and not a harddrive, I don't know... By the way, everything is normal with iPhoto and iTunes. Sincerely
-
I have setup a specific baseline in a form text field with placeholder text. It seems that the richt text data is linked to the text because when I erase all text and write something new the baseline shift is reset to 0. What are my possibilities, I
-
Where is app search on iTunes for Mac Book Pro
Where is the "search" button on iTunes App store for Mac Book Pro?
-
Iphone Activation Center Unavaible
Hello, Yesterday I switched off my Iphone 5 and this morning on start up it asked me to activate the phone. I tried using wifi and 3G connection but it always tell me that the activation center is unavaible at the moment. I also tried to contact the
-
OIM: How to get the last operation and data from a child form action
Dear OIM guru, I have a regular Process form, a child form and a process definition. When there is an insert/delete into child form a trigger is raised and the process task gets called. The process task does whatever it needs to do on the target syst