Finding an Error Message in logic?

I usually go to SE91 and do a "where used" on the message. However, sometimes it does not find anything.
Does anybody have another good way to track down error messages and where they live?
Thank-You.

Hi Tom,
First we have to check from which message id error message is showing after that got o SE91 and give the message id name and then search the message no which is showing the message.
Regards,
Sunil

Similar Messages

Error Message "No logical port exists to call web services" installing SM7

I am trying to use SLM to download a service stack. However, the option is not available in step 2.5. There is an error message "No logical port exists to call web services". I have performed the Wizard install, but the Wizard seems to have left out this step. I have looked around for documentation on how to configure the port, but cannot find anything more useful than comments to the effect that I should configure the port.

I found the problem, I think, although I am now on to the next problem. "Web Services for software lifecycle manager not available'.
The documentation is lacking. When the RFC connection is set up, the user id is j2ee_admin, using the install password. This is not specified anywhere in the install instructions that I could find, there is only a reference to a 'user id and password'.
The LPCONFIG is used to create a logical port, that ties the RFC to the LP. However, no name is specified that is to be used for the LP.

How can I open my file after 'cannot find -filename-' error message?

OK, the bottom line is, InDesign crashes and I cannot recover my file. I get a 'Cannot find file' error message when I try to open the file.
I am using CS6 on a MacBookAir, OS X Yosemite.
I have tried finding the 'InDesignFileRecovery' folder, I cannot find it anywhere, it's not in my Library or Caches folder.
However, I do work in dropbox, so I just headed over to dropbox to recover from their 'previous versions'. It starts to get weird. There are lots of previous versions (I save very regularly) but when I download a previous version (that I know was fine) it downloads with a indd.txt extension. So I remove the txt extension and keep the indd and everything looks fine, but then that recovered file gives the same message. I tried renaming the recovered file and opening that, same 'cannot find file' error message.
I can open InDesign and open the file from the day before, but none of the dropbox earlier versions of that day's work. I am SO sick of this happening. It happened to me last week to, so far I have lost 20 hours work :-(
I have tried quitting InDesign and restarting the Mac, doesn't help. The only thing I can think of is to 'save as' every couple of hours, at least then hopefully I only lose 2 hours work.

Thanks, when you say 'hidden by default' then how does one find it? I have already tried the path you mention and there is no sign of a cache folder with Adobe files. Spotlight doesn't reveal anything either.

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help-

Can anyone help me? The iTunes update corrupted my program. I uninstalled, and then reinstalled iTunes; only to find an error message about iTunes Helper. After several fruitless, repeat attempts, I am at a loss. Please help…

Many thanks.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

How do I resolve the "Mozilla cannot find runtime" error message when I try to start Firefox?

Mozilla Firefox updated to version 36.0. When I click on the Firefox icon to open it I receive the message: "Mozilla cannot find runtime" I receive the same message if I try to open Firefox by selecting "firefox.exe" from within the Program Files. I subsequently uninstall Mozilla Firefox and reinstall it. It will open and run normally right after the re-installation. Then if I close the program and try to re-open it again, I get the same "Mozilla cannot find runtime" error message.
The only way I can get Firefox to open is if I uninstall and re-install it every time I want to open it after the initial re-installation.

''sage68 [[#answer-700841|said]]''
<blockquote>
Hi Adriel,
The "Mozilla cannot find runtime" problem has returned. It occurs in two situations:
1. When Firefox tries to download updates using "updater.exe" (version 36.0.0.5531), which causes my "Norton Internet Security" program to notify me with the message: "Auto-Protect has removed security risk Suspicious.Cloud.9.B" This message is shown every time "updater.exe" activates.
</blockquote>
I also have experienced this during several upgrades, not just the latest. (I am using Windows XP and Norton Security Suite.) Norton identifies c:\program files\mozilla firefox\updated\xul.dll with the Suspicious.Cloud.9.B virus and removes the file. I can set the Norton installation to accept xul.dll but it would make more sense for a Mozilla expert to contact Norton and work out a permanent solution, for all who are facing this problem.

How can u find SRM error message texts?

hi friends
How can u find SRM error message texts?
thanks
regards
chinna

Hi,
There are several ways.
1. Go to BBP_PD and open the document. Select the link "Check again" in the bottom area.
2. Go to SE17 and serch it from table T100.
3. Go to SE91.
Regards,
Masa

"Cannot find Symbol" error message

I have a "cannot find symbol" error message on line 5 below in
the driver class.
Thank you for your assistance
1 public class GameLauncher
2 {
3 public static void main(String[] args)
4 {
5   GuessGame game = new GuessGame();
6   game.startGame();
7 }
8}
public class GuessGame
public void startGame()
Player p1;
Player p2;
Player p3;
int guessp1 = 0;
int guessp2 = 0;
int guessp3 = 0;
boolean p1isRight = false;
boolean p2isRight = false;
boolean p3isRight = false;
int targetNumber = (int) (Math.random() * 10);
System.out.println(" I'm thinking of a number between 0 and 9....");
while(true)
    p1.guess();
    p2.guess();
    p3.guess();
    guessp1 = p1.number;
    System.out.println("Player one guessed " + guessp1);
    guessp2 = p2.number;
    System.out.println("Player two guessed " + guessp2);
    guessp3 = p3.number;
    System.out.println("Player three guessed " + guessp3);
    if (guessp1 == targetNumber)
      p1isRight = true;
    if (guessp2 == targetNumber)
      p2isRight = true;
    if (guessp3 == targetNumber)
      p3isRight = true;
    if ( p1isRight || p2isRight || p3isRight)
      System.out.println("We have a winner ! ");
      System.out.println("Player one got it right? " + p1isRight);
      System.out.println("Player two got it right? " + p2isRight);
      System.out.println("Player three got it right? " + p3isRight);
      System.out.println("Game is over ! ");
      break; //game is over so break out of loop
    else
      //we must keep going because no one guessed the number !
      System.out.println(" Players will have to try again ! ");
    } // end of if/else
} // end of loop
} // end of startGame() method
} //end of class
public class Player
int number = 0;   // the guess is stored here
public void guess()
    System.out.println(" I'm guessing " + number);
---------------------------------------------------------------

Thank you . You were right . I didn't set up the classes correctly.
I corrected a few other errors and the program runs ok !
Below is the corrected code and the output
public class GameLauncher
public static void main(String[] args)
   GuessGame game = new GuessGame();
   game.startGame();
/* One possible set of output is
I'm thinking of a number between 0 and 3....
I'm guessing 1
I'm guessing 3
I'm guessing 0
Player one guessed 1
Player two guessed 3
Player three guessed 0
We have a winner !
Player one got it right? true
Player two got it right? false
Player three got it right? false
Game is over !
public class Player
int number = 0;   // the guess is stored here
public void guess()
    number = (int)(Math.random() * 4);
    System.out.println(" I'm guessing " + number);
public class GuessGame
public void startGame()
    int x = 0;
Player p1 = new Player();
Player p2 = new Player();
Player p3 = new Player();
int guessp1 = 0;
int guessp2 = 0;
int guessp3 = 0;
boolean p1isRight = false;
boolean p2isRight = false;
boolean p3isRight = false;
int targetNumber = (int) (Math.random() * 4);
System.out.println("\n I'm thinking of a number between 0 and 3....\n");
while(x <5)
    p1.guess();
    p2.guess();
    p3.guess();
    guessp1 = p1.number;
    System.out.println("\nPlayer one guessed " + guessp1);
    guessp2 = p2.number;
    System.out.println("Player two guessed " + guessp2);
    guessp3 = p3.number;
    System.out.println("Player three guessed " + guessp3);
    if (guessp1 == targetNumber)
      p1isRight = true;
    if (guessp2 == targetNumber)
      p2isRight = true;
    if (guessp3 == targetNumber)
      p3isRight = true;
    if ( p1isRight || p2isRight || p3isRight)
      System.out.println("\nWe have a winner ! ");
      System.out.println("Player one got it right? " + p1isRight);
      System.out.println("Player two got it right? " + p2isRight);
      System.out.println("Player three got it right? " + p3isRight);
      System.out.println("Game is over ! ");
      break; //game is over so break out of loop
    else
      //we must keep going because no one guessed the number !
      System.out.println(" Players will have to try again ! ");
    } // end of if/else
    x = x + 1;
} // end of loop
} // end of startGame() method
} //end of class

Can't find DAE error message -9065

IEverytime I launch Logic i get the "can't find DAE error -9065" message. any tips?
Thanks
matt

If you don't even have Digi HW, somehow somebody installed and drove with it. So you're better off removing the driver because it's only going to cause problems. You can launch Logic with control held to bypass the audio engine from loading when you launch, to disable it.

Error message in Logic "audio configuration contains unknown items"

I am using Logic Studio with an apogee Duet and Mac Book Pro.
So far I love the apogee duet for it's simplicity and sound. I have
however started to receive this error message working with Logic Studio,
almost anytime I start a new track, add a plug-in or instrument, etc.
"Audio Configuration contains unknown items"
It did not do this from the very beginning but started after a few
sessions. I have tried re-installing the driver disc for the Duet but it still happens.
when it does pop-up i can click the ok box and after clicking several times
it will go away and let me proceed.
Could anyone please advise me.
thank you very much.

Maybe this happen bacause you put many additional info in your "Aple discussion" profile about the software that you use, but we can also say you the same as Logic message:
your detailed "Audio configuration" profile info contain a "unknow item"
Whitch is your audio interface?
G
PS: anyway, try to trash Logic preferences.

How to find the error message populating for infotype 2001 iN pa30

Hi ,
I got a requirement that one of our end user a a error message is populating when he tries to enter the data in 2001 absences infotype.
I check the documents ...it is written as a there is long back they modified the original T-code of 2001(report or userexit not sure) to allow only HR Department people , no one can enter the details apart from HR ,no-one else should be able to do that!!
Now i need to find where the error message is getting .............i dont know what is the best approach,
i debugged it(before savgin) but its too long to find......I put the break points for the user-exits available for the infotype(Total i found 16 Package PTIM) ......no user-exit is triggerring..i searching from morning....
The main problem is it is working fine for me.I am not getting error message...so unable to catch
Please help me how to search...or need to search with 'AUTH ' field? if so in how many programs?
or need to search using the 'MESSAGE' i just have the screen shot of the message..with the content how could i found that ??
waiting for your valuable inputs....
regards
sas

Hi Gautam,
Thanks for reverting back, but my problem is i am not getting error message!!
enduser is getting that!!
Rgars
sas

Can't find CD error message when connecting razr v3i

i've been using itunes for some time now, and just got the razr v3i. when i conntect it with itunes open, it recognizes the phone, but give me an error message that it can't find the CD.
is there other software that i need to install (from the CD that came with my phone)? i thought that just having the latest version of itunes was enough?
THEN, it kept giving me the error and everytime i clicked "ok" it popped up again, and it took 10 minutes before i could eject the phone from itunes! Why is this so hard?

i had to restart the phone and try again. finally worked.

Table in which RZ20 alerts are stored (Where can I find the error messages)

Hi All,
I want to know the table where i can see all the error messages poplulated as alerts in the TCode RZ20.

hi,
You can use the FM "BBP_GET_STATE_MONITOR" to get the avrious alert messages.
BR,
Disha.
Do reward points for useful answers

Edge Animate could not find .html error message

I have a series of animate files that I have created. When I try to open the files to make edits, this error message appears:
All of the files are in the same folder, and I have not changed any file names or coding outside of animate. I can open the .html file and edit that, but when I go to save or publish, I get this message:
I've seen the first message on a couple of discussion threads, but it didn't really seem to resolve the initial problem. I'd love it if someone had a fix for this.

Hey guys,
Sorry for the trouble you're running into -- maybe check these few things.
Are you trying to open a published file? Only the original .html file can be opened with Animate; the published files aren't runtrippable.
Has the .an or associated .html file been renamed? Have any of the dependant folders or files been renamed? The naming used when saving needs to remain in tact. In the future we're looking to loosen this restriction, but if you rename the .html or .an Animate will barf when you try and open.
Is the file saved in a locked folder? Permission issues can arise if you have restrictions placed within the OS. If you're not sure where to look for this, Here's an article on how to change permissions on Windows. Be sure to check the directory you're saving to and publishing to. A quick test might be to copy the entire AN project/files onto a conventionally unlocked folder like the desktop and try running from there.
For the users in this thread: Can you describe your operating system, and where your files are being saved and where Animate is installed? For example C:\Windows\Blah\Programs
Thanks,
Sarah

Error : message mapping logic in PI

Dear Team,
Please find the source and target structures..
Source ::
->MT
-->records
--->matnr
--->batch
--->submatnr(s)
Target::
->ZRFC
-->Import
--->Item
>matnr
>batch
>submatnr
1) It is SOAP to RFC scenario. In Source strcuture for one matnr , we have one or more submatnrs.
2)RFC in R/3 contains Import parameters as..matnr,batch,submatnr(onlyone).
3)I want to build mapping - for each submatnr in source I want to create one complete record in target .i.e
if matnr contains 2 submatnrs in source , i want to create 2 records at target side like
first record - matnr,batch,submatnr
second record - matnr,batch,submatnr.
here in both records the matnr and batch values are same , which we have taken from source but submatnrs changed.
Can any body help me how to build mapping.
-Drumi

Hi,
I assumed that submatnr occurance 1 to unbounded...
here is the logic
map
Submatnr----->SplibyValue(ValueChange)-->RemoveContect-->Item
matnr1---->useoneAsmany(1st argument Matnr1,second and third arugument submatnr)--->splitbyValue(EachValue)-->Matnr1.
batch1---->useoneAsmany(1st argument batch11,second and third arugument submatnr)--->splitbyValue(EachValue)-->batch1
submatnr-->removecontext-->splitbyevalue(eachvalue)--->submatnr
Regards,
Raj

Jdeveloper remote debugging - Unable to find source error message

Hi,
I am trying to remote debug a simple Java application (non-web) using Jdeveloper. The Jdev debugger can connect to the remote debuggee, but unfortunately it throws me a message saying: 'Unable to find source file'. As a result, if I ignore this message, it simply ignores my source breakpoints.
Can anybody please help with any tips?
My project source is checked out from CVS and does not follow a conventional source path as such.
Thanks,
Neil.

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

Finding an Error Message in logic?

Similar Messages

Maybe you are looking for