Finding class from material and plant

Hi experts,
By giving the material and plnat I need to find out the particular class .
Is there any Bapi or FM to find this and is there any table to this.
Please help me on this
Thanks
sai

hi
use the FM QMSP_MATERIAL_BATCH_CLASS_READ then Check data in tables KLAH and KSSK.
you can also got to transaction SE80 with FUNCTION GROUP as QMSP.here you can look for the function module you are looking for in this function group.
hope this help s you
Regards
Aakash

Similar Messages

Characteristics values for material and plant

Hi Experts,
I need to fetch characterstic values from a class Y-xx . I belive badi BAPI_CLASS_GET_characteristics
will give the result but my problem is in selection screen I am passing material no and plant
for this material and plant i need to fetch the characteristics values from the Y_xx class
Could any one suggest the BADI or FM or tables to fetch the results
Thanks in advance

Hi,
Go to MEK2, here enter the freight condition type, go to the output screen as pr the access maintained and select the line item and click on "Scales" button to see the from and to value.
Also you can check the same in "Conditions" button in Purchase Info record.

Need help on enhancement of 0CO_OM_OPA_1 with Material and Plant

Hi,
I have a requirement that need to build a BW report which shows Actual costs and Planned Costs of Service Orders. We are getting Actual costs from 0CO_OM_OPA_6 and now i am getting planned costs from 0CO_OM_OPA_1. For actual costs we are getting Service Orders, Material and plant from Satandard DS 0CO_OM_OPA_6. Where as For Planned Costs standard data source 0CO_OM_OPA_1 is not having Material and Plant information. For this we decided to enhance 0CO_OM_OPA_1 with Material and Plant.
But we are not sure the source tables for material and plant and the logic to extract these data from the tables. Can anybody please help me out.
Thanks for your supprt in advance.

It's possible you may need to use a CO-PA (profitability analysis) datasource instead of 0CO_OM_OPA_6. 0CO_OM_OPA_6 extracts data from CO tables.
Based on the path you provided "...Profit. segment...", the requested data might exist with CO-PA.
If you determine the required data resides in CO-PA, you'll have to create a datasource based on the operating concern. You can perform a search within the online docs for steps to create this datasource.
Hope this helps.
Rod

Plannning Material and Plant for MRP Run

Hi,
If I have a material (01) extended on 2 plants, on one plant (A) we have production and planning/MRP + stock and on the other one (B), just stocking and transfer. B's requirements are to be entered and planned at A. I also want stock at B to be considered with stock at A when MRP runs at A. In the material master, I have some settings. I want to know if these would be any good:
Material 01 on Plant A:
MRP PD
Strategy 40
Lot size EX
Coverage profile applied
Material 01 on Plant B:
MRP ND/PD tried both
Strategy 40
Lot size EX
Coverage profile applied (same)
Planning material: Material 01 itself
Planning plant: Plant A
I particularly want to know about points 5 and 6. Will they make any difference if I run MRP on scope of planning(all plants) or just plant A? Will stock at B be considered? What difference does that setting make in my case? Please help!
Thanks!

No sales on Plant A. Only transfers and STO's. Stock is STO'd to Plant B (and other Plants, as well)
Plant B sells the stock.
Yes, I want to load the forecast in Plant A (COPA to SOP to DM to MRP). What do I do in this case?
I tried another case, as well. In that I put a special procurement on the material in Plant B view and marked it as external procurement. (the planning material and plant were there, didn't remove)
Then I entered the forecast in both plants separately (PIRs for both Plants) The requirements from Plant B made STPO Planned orders in Plant B and STCK Planned orders in Plant A. I am using coverage profiles (period is month, standard length 25 days, target 10 days for 1st period for 2 months, target 10 days for 2nd period for 1 month, target 10 days for the rest of the horizon) Not using any consumption modes.
The results I am getting don't make sense to me. I have attached screen shots for both plants MD04 and the MRP + work scheduling views

Changing Batch Management Level from Material to Plant

Hi all,
We are investigating changing our batch management level from material to plant to meet business requirements.
SAP has pointed us to a note with a program to reset the batch level, as well as highlighting some things to look out for.
I've conducted the change in a playpen system and so far it looks relatively straightforward, with complexities arising only when characteristics exist, or when a batch exists in multiple plants.
Seems that batch master data is moved from MCH1 to MCHA, including the object link number to classification. Unfortunately it seems a limitation of the conversion is that the batch master data is copied to ONE plant only in MCHA, no doubt due to the fact the object number link to classification must be unique.
My question is this: has anyone performed this change before, and if so can you offer me any advice on what to look out for, or potential problems that arose after the change?
Any help or comments are appreciated.
Mark.

hi..
first of all try this simple one...
You will have to delete all the materials, remove stock and then switch the batch management flag.
Or
To convert the batch from plant level to material there is Conversion Program defind by the SAP...
1. For all releases lower than Release 4.5B, implement the corrections and the modification in the report RM07CHDX as described in the correction instructions.
2. Create the report ZCHTCUCH, which is specified in the attachment.
3. Run this report in the clients for which you want to reset batch level to plant level.
4. Call transaction OMCT.
5. Check whether the batch level for "Batch unique at plant level" is set.
6. Implement Notes 821891, 944278, 950540 and 1091613 if you have not already done so (or you have not imported the corresponding Support Package).
7. Execute the function "Batch Level -> Conversion".
8. Define a plant for a plant view that may be missing.
9. Always execute the report in the test mode first. Analyze the error log.
10. If no errors occur, you can execute the report in production mode.
11. If you are working with batch long texts, first execute the report ZM07CHDX_TEXT in test mode.
try this out..hope is works,,
Thanks..

Conversion of Batch from Material to plant level

Hi
Each time i try to change the Batch management level from Material to Plant I get the following message:
This type of conversion is not yet implemented Message no. CZ308

Please see also the [thread|Batch Management; and SAP note 891902, especially bullet 4.
Regards,
Stefan

User Exit to check whether chapter id for Material and Plant combination is maintained while creating sales order

Hello all,
my requirement is, system should give error message while creating sales order, if chapter ID is not maintained for a material and plant combination.
please suggest the user exit.

Hi
CASE 1 : All Plants are excisable.
In Material master , Foreign Trade data tab- mentioned Control code field mandatory. ( i.e nothing but Chapter ID)
CASE 2 : Few Plants are excisable
In the Case 2 you need to go for Enhancement
Program Name : MV45AFZB
User Exit: USEREXIT_CHECK_VBAP ( Item Level Check )
By using above user exit you write a logic with the help of ABAPer
Plant and Chapter ID combination table : J_1IMTCHID

Transaction code to display exception messages by material and plant

Hi,
Is there a transaction code or standard report in SAP to display exception messages by material and plant? I see the exception messages by individual material and plant in MD04 but I need to see a collective view. I tried Collective access in MD04 and MD46 but they are not giving me exception groups but I need exceptions listed out by material and plant.
Thanks.

Visu,
I have never seen such a report.
MD06 does support fine tuning the output display, once the list has been generated. If you use this feature, the resulting display is the entire list as created by selecting the initial parameters (such as exception group), but with the specific items that contain your selected message highlighted. If you are addressing the messages interactively, you can select the review (glasses) screens, and scroll through just the ones which contain your selected exception message(s).
To try this, execute MD06. Select the groups as necessary. Execute. Wait for the list. Now, immediately, select 'search' (binoculars). Experiment with the output.
As mentioned in the previous post, if MD06 does not meet your needs, you will need to have a custom report written.
Rgds,
DB49

How to get material and plant by providing control key as input ?

How to get the material and plant info based on control key values using a function module?
kindly help..

Hi,
Check the FM
K_VALID_PLANTS_OF_MATERIAL.
Sandeep Kaushik

Derivation of Commitment Item from Material and Services codes

Hi experts,
I need to derivate a Commitment Item from Material and Services codes, because the many material and services are related with the same financial account.
I have seen that material codes appears in Source Fields, but service codes not.
Can you indicate me if exist some option to derivate commitment item from Services Codes?
Thanks a lot in advance.
Regards,
José Luis

Hi,
You can add fields to the source:
https://scn.sap.com/thread/1969599
Regards,
Ming

FM / BAPI to update STEUC field in marc Table basing on material and plant

Hi,
I need to to update STEUC field in marc Table basing on material and plant. please suggest FM / BAPI.
Thanks.
raviraj.

Hi
Try this BAPI function module:
" BAPI_MATERIAL_MAINTAINDATA_RT "
Data: LS_HEADDATA TYPE BAPIE1MATHEAD,
         LS_RETURN TYPE BAPIRETURN1,
          LT_PLANT TYPE TABLE OF BAPIE1MARCRT,          LS_PLANT TYPE BAPIE1MARCRT,
          LS_PLANTX TYPE BAPIE1MARCRTX,          LT_PLANTX TYPE TABLE OF BAPIE1MARCRTX.
        CALL FUNCTION 'BAPI_MATERIAL_MAINTAINDATA_RT'
               EXPORTING
                   HEADDATA   = LS_HEADDATA
               IMPORTING
                   RETURN     = LS_RETURN
               TABLES
                   PLANTDATA = LT_PLANT
                   PLANTDATAX = LT_PLANTX.
Check the PLANTDATA in the above fm in which pass your ''STEUC'' to BAPIE1MARCRT-CTRL_CODE......
Hope this works.....

Any ideas why placing Material and Plant in same DIMENSION is a bad idea?

Hi,
I place Material and Plant in the same dimension and a colleague argued that it is a bad combination in the same dimension although he did not explain.
Can you provide some examples to explain to me why this is a good or bad combination?
What are the rules in making decisions on which characteristics go into the same dimension?
Thanks

1.
m:n relation
If I place a Material and Plant in a dimension, let's say 5 plants and 1000 materials, then there will be 5 x 1000 = 5000 material-plant combinations.
1. Is this 5000 material-plant combination taking place in the Dimension or in the cube?
In the dimension table.
Remember we are trying to see that the size of the dimension table is lot smaller than the size of the fact table.
m:1 relation
Similarly, if I place a Material and in a dimension, let's say 5 Material Groups and 1000 Materials, then there will be 5 x 1000 = 5000 Material-Material-Group combinations.
2. What is the difference between the
5000 Material-Material-Group combinations &
5000 Material-Plant combinations ?
Here the example is wrong. Imagine if 200 materials each fall under one material group, then there are not 5000 combinations but only 5 material groups with 200 each.
3. And why does one improves performance over the other
i.e. why is the
5000 Material-Material-Group combinations better than that of 5000 Material-Plant combinations
In the second case the dimension table is lot smaller and improves performance.

Outbound delivery allows only the unrestricted stock for particular material and plant

Hi,
In STO I have an problem the outbound delivery creations allows all stocks under unrestricted, Quality inspection, Block stock.
I want the outbound delivery creation of a particular material and plant it allows only the stock under the unrestricted only. It doesn't allows the stocks under the Quality inspection and Block stocks.
I need to know how to configure this or how to solve my requirements.
Regards,
Ramesh N

Dear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy.

Characteristic values for the material and plant combination...

Hi Friends,
I would like to know how can we maintain the characteristic values for the combination of Material and Plant though the material is not batch managed?
Thanks in advance,
Ram

Hi Rajendra,
Thanks for quick reply. I am maintaining under classification view but it does not ask plant any where. So the value will be same across all the plants but i want to maintain characteristic values separately under each plant for same material.
Regards,
Ram

How can i find the Goods Receipt (GR) date with a given material and plant?

Hi experts,
How can find the GR date with a material # and a plant? I have other info such as batch and Sales Order. In which table is the GR date stored?
Thanks in advance.

table EKBE, field BUDAT

Finding class from material and plant

Similar Messages

Maybe you are looking for