Finding Customer number in SAP

Hello,
Like we find the installation number of a SAP system from "Status" or the T-code SM51, is/are there any simillar way to find the customer number of a SAP system from within the SAP system. I know we can find it from the SMP or if its connected to Solman, we can find it from the solution manager system.
But, can we find it within the system?
Thanks in advance
Arun

Hi Sunny,
thanks for the reply! But as I had mentioned before this note again refers to solman. As Anjali had pointed out, I think its not possible. But if there is a way, I'm very curious to findout!
Thanks
Arun

Similar Messages

How to find request number of SAP Script's Form

Hi All,
Can anyone tell me how to find out request number of scipt's form
Regards
Shashikant

Hi,
Se03->Search for Object in Requesta/Tasks--->Right Click ->Execute->Add a new entry with check box ticked,FORM,& Form name on the right side-->F8 It will display all the requests pertaining the form you have keyed in.
Regards
Raju Chitale

Restrictions in defining customer number in SAP R/3

Hi,
Is it advisable to use the charcter "&" in customer numbers and in business partner naming? Are there any restrictions in characters used for customer numbers (ERP: KNA1-KUNNR).
Thanks

Hi Mike,
As per your requirement, i feel that for ID either you can create a new field say sequence ID in this e-mail addresses table of MDM and thus can syndicate it or can also use ID as key using remote key concept. I mean for this e-mail addresses table, you can set property Key mapping = yes in MDM Console and thus can use this IDs as key for this email address e.g. for massupa@nexus you can save ID as Key.
So during syndication, map this field with target IDOC structure field and I mean Remote Key under e-mail addresses table with IDOC ID target field. In this way you can have correct IDs with their corresponding email addresses.
Kindly let me know if you are looking for something else.
Regards,
Mandeep Saini

Customer Number is missing.

Dear Guru's.
Hi all. I would like to ask any help or ideas on our concerns/ or should i say issue or problem regarding customer master.
As we all know, we assign number ranges for the customer number.
But when we check customer report to show all list of our customers in the whole organization, we notice that some of the number ranges were skipped. say for example.. our customer should be 10001 - 19999.
Currrently it is ascending but cannot find customer number 10602 to 10604.
I tried to check it in customer table such as KNVV and alike to see whether its there but deleted , but that numbers are really missing.
Question, is it possible that there are certain numbers really been skipped and not used in SAP?
Is there any way to tracked why certain numbers where not assign?
Thank you in advance.

Dear Tina
In the number range intervals screen, there are 3 columns,"From Number', 'To Number' & 'Current Number'.
'Current Number' is dynamically updated depending upon the transactions .
Now, we can go to 'change mode' & directly & manually change this 'Current number'.
For eg:
Current number is 5.
Now, if I change it manually to 8, then the numbers 6 & 7 will surely be missing.
Hope, I am very clear & you have understood.
Rgds
Sumanth.G
Consultant/Systems Analyst - SAP SD/MM

7 character field to purchase order ,customer number

please help
1)
data : kunnr1(7) type c.
data : kunnr like kna1-kunnr.
kunnr1 has only field length 7 and it is of type character.
kunnr is a sap field.
everytime i need to fill the data from the field kunnr1 to sap kunnr and pass to bdc .
suppose kunnr1 = 1930903 ie 7 characters .
and in sap shall i simply copy like this
kunnr = kunnr1. " will this work
or
concatnate '000' kunnr1 to kunnr.
or
any other one .
2)same with the purchase order number.
data : po(7) type c.
dat : bstdk type vbak-bstdk.
po = asdefgr
bsdtk = po
or
concatenate '' po to bsdtk.
if i assign value from po to bsdtk will at end command will work on bstdk?
example
loop at itab into workarea.
at last bsdtk." i need this to work so tell me how to assign the value from po to bsdtk
endloop.

i checked the customer number in sap system,
in the sales order it is stored as 1277494
i checked in vbak table and it is stored as 1277494and rest blank spaces.
i checked in kna1 table , the same kunnr is stored as 0001277494.
why is this difference?
so i need to use the 'CONVERSION_EXIT_ALPHA_INPUT' for kunnr?
I checked for po but that is stored as a charater format and no need to add the leading zeros, is that right?
I used CONVERSION_EXIT_MATN1_INPUT for material do i need to use CONVERSION_EXIT_ALPHA_INPUT for material also?
thank you for the solutions given.

Where is the customer number(KUNNR) stored in VBO3 transaction??

Where/In which Transparent Table is the customer number(KUNNR) stored in VBO3 transaction??
In VBO3 transaction>>Enter some agreement number>>press enter>>Click on Condition button>>select some value and proceed.
Here you will find Customer number(Kunnr).Please tell me,in which table is this value stored??Kindly tell me the procedure to find the same so that I can find In which transparent table others fields stored on this screen......:)
Regards,
Shashank.

dear shashank,
1. just go to the screen and -
> click f1 -
> then technical details
> click on dataelement -
> double click on data element
> then check menu bar -
> utilities -
> where used list
you will find some tables ... so these are the main tables
2. or other wise go to st05 ,
    activate trace
   do the transaction
   and deactive trace
   and check the details in that u can view tables from that you have to see in which table it is updating..

How to find out the company code given the customer number

I am new to SAP please help me out? How do you find out the answer.

Hi,
Goto T.Code SE11/Se16/SE16n.
Key in the table name as KNB1.
Enter your customer number.
Execute.
You will get your company code here.
Another way is Goto XD02/XD03.
Enter your customer number.On company code press F4.Enter the customer number and press Enter.A list of company code in which your customer presents will appear.
Regards,
Krishna.

Number for bDocs processed per hour in custom interface to SAP CRM from Tibco

Hello Experts,
Could you please let me know the ideal Number for bDocs processed per hour for a interface which has SAP CRM and TIBCO.
The intent is to use to most easy to scale technology for a custom interface to SAP CRM from Tibco .
I did check the forums but was not able to get a definitive answer.
I understand that it is not possible to quantify the exact number of BDocs that can be processed in an hour,but could you please let me know the factors on which it depends.
Regards,
Akash

It depends on type of data you want to process and the size of your hardware. My rule of thumb is that you should be able to do at least 1 BDOC per second in a worst case scenario or 3600 records for a small size system. Keep in mind the biggest bottleneck is the database update/lookup times. A properly sized large system, could do much more volume. Your best bet is put in the desired transactional throughput into the SAP quicksizer and then work with your SAP hardware partner to approriately size your production box.
If you already have hardware for production bought/existing, then find out the current SAPS rating for your hardware and then use the quicksizer to determine the target SAPS needed to meet your requirements.
Take care,
Stephen

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

How to find the number of idocs generated for a customer on the basis of his purchase order in a day ?

Dear Friends,
I am absolutely agree with your answer .
But my question is,
Lets say.....
One customer sending X number of purchase orders in a day , so how many IDocs generated on that specific day for that specific customer .
So, Question is , How can we find the no of sales orders(IDocs) generated for the customers on the specific day ?
Hope you all understood my requirement .
Thanks & Regards,
Aditya

SAP customer number unknown for installation number

Hi There,
We're facing some problems after a reconfiguration of some things in Solution Manager. We have SAP EHP 1 for SAP Solution Manager 7.0. Have made two days ago the installation of the latest SP, but not the kernel yet.
The problem is in the job SEND_SYSTEM_RELATIONSHIP_TO_SUPP. The error is:
08.01.2010 10:43:24 Job started                                                                                00           516          S
08.01.2010 10:43:24 Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant , user ID SOLMAN_BTC)      00           550          S
08.01.2010 10:43:24 SOL determined as monitoring Solution Manager system                                      AI_SC_EN        075          S
08.01.2010 10:43:24 SAP customer number unknown for installation number 00XXXXXXXX               AI_SC_EN        097          E
08.01.2010 10:43:24 Job cancelled after system exception ERROR_MESSAGE                                           00           564          A
The info about the system:
solman:soladm 21> disp+work
disp+work information
kernel release                701
kernel make variant           701_REL
compiled on                   HP-UX B.11.23 U ia64
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Feb 24 2009 21:53:01
update level                  0
patch number                  32
source id                     0.032
supported environment
database (SAP, table SVERS)   700
                              701
operating system
HP-UX B.11
Thanks,
Joao

Hi João Cesar,
I´m faccing with the same error... I installed the solution manager Ehp1 and it have SPS20 applied which correspond to ST 400 level 20 (SAPKITL430).
When I am in transaction SMSY in section Systems and I press the button "READ SYSTEM NUMBER" is shown an error message that says "SAP customer number unknown for installation" the details of help says:
Diagnosis
Installation number &V1& that is assigned to some system(s) in transaction SMSY is not assigned to an SAP customer number in table AIINSTALLATIONS.
Procedure
Please check the log of background job REFRESH_ADMIN_DATA_FROM_SUPPORT for errors.
So, when I entry in that job log I found this error:
No customer numbers maintained in view V_AISAPCUSTNOS   | AI_SC_EN   | 106
Then I went in table/view V_AISAPCUSTNOS and inside does not contain any data!!!
All the notes I found were related to lower versions and so I could not implemented the snotes corrections!! Any notes for my release that are related with this problem?
Joao Cesar what you did for solve this problem??? You didn´t mentioned!! You only mentioned that you implemented some notes.. but which ones?!!?

How to find out the customer exit and sap exit variables created provider?

Hi all,
How to identify what are all the customer exit and sap exit variables are been created for an info provider. is there any tables which allow us to find out.
thanxs
haritha

Hello haritha,
SAP Exit and Customer Exit variables are created for Characteristics and not for individual InfoProviders.
So whenever the characteristic is used in the InfoProvider, by selection the appropriate variable the exit can be called.
So the same Exit can be in one or more InfoProviders.
Hope it helps.
Thanks,
Chandran

How to find Tables behind a Custom Query in SAP

Hi Gurus,
Can anyone please help me find tables behind a custom query in SAP.
Regards
As

Hi
Check the name of the programm assigned to transaction, it should be like this:
AQZZ<user group>=======<query name>======
or
AQIC<user group>=======<query name>======
It depends of the query area is global or cross-client
So run SQ01, select the quey area, select the quey group and so your query: now you can see the infoset and then you see it by SQ02 transaction
Max

SAP ECO 5.0 B2B: No customer found with customer number

Hello all,
we´re using SAP E-Commerce for ERP 5.0 (SP9) with backend SAP ECC 6.0 EHP4.
We have changed from SU05 to SU01 user concept. All existing SU05 users have been migrated to SU01. In SU01 (under references) for each SAP E-Commerce user the mapping (user <=> sold-to-party) has been set up as described in the online documentation.
For example: SU01-User u2018500070u2019: Tx SU01 under 'references':   Obj.type u2018KNA1u2019 with key u2018500070u2019. A corresponding customer master record u2018500070u2019 can be found in the ERP system using transaction VD03.
In the shopping basket maintenance the following error message occurs: u2018No customer found with customer numberu2019.
In our testing system (SAP E-Commerce for ERP 5.0 (SP12) with SAP ECC 6.0 EHP0) everything is working fine. The problem only occurs in the customer ERP system (SAP ECC 6.0 EHP4).
Thanks for your help in advance.
Regards,
AEV

At the code there are some checks for the backend system. A normal ECC 6.0 gives there a version "700" back. If you have an ECC 6.0 with EHP4, that will give an other number back from backend system. I think "701".
At the Source-Code of ecommerce, there is no check for 701... Add that to the sourcecodes and it will work.
Example:
if (r3Release.equals(RFCConstants.REL46C) ||
                    r3Release.equals(RFCConstants.REL620) ||
                        r3Release.equals(RFCConstants.REL640) ||
                             r3Release.equals("701"))
Im not 100% sure about this because i had the same problem in ISA 4.0, not ecommerce 5.0.

Where do I find the Group account number in SAP system

Hi All,
I have the same problem. I work in a company where all was installed and configured before my arrival and so I always need to do a lot of research to solve a problem.
I tried somedays ago using txcode FS00 to create a new GL account but got stocked because the system requested a Group Account Number (Consolidation data in Charts of Accounts).
I do not know where to find this number in the system. After a very long search, I have given up searching and hereby ask for your help.
Can anyone tell me where to find the Group Account Number in the system. Is there a txcode for this? I tried already OBD4.
As I am new in the SAP world, a step by step explanation will be appreciated.
Many thanks in advance

Hello aolowu
Group Account Number field has lot of year/period end ramifications. Here is the definition " When you define the balance sheet and PL structures, then accounts are assigned to line items within the balance sheet and PL. This assignment is made either via the G/L account number or alternatively via the group account number given in this field. The usage of the group account number offers the advantage that by specifying a number, a group of accounts can be assigned immediately to the balance sheet or P+L item". Suggest you work with a FI guy.
To quickly get over however, you can enter the same number that you are creating in that field. At my current client, I have seen several accounts set up like this, although many of them have a different number there.

Find the PO number in SAP

Hi,
I needed to know how to find the PO number in SAP by the source of (Vessel code, voyage and Port code we upload in configuration), is there is any way to found PO numbers for the particular vessel and voyage?Is there is any transaction code to find PO numbers?? i will be very thank full for this.
Thanks
Pkn

You must find the Delivery note number from the Voyage and Vessel code details,
If the delivery is with ref to the PO, you can find the same in the corresponding delivery. else you can get Sales order.
if the SO is linked to a PO, you can get PO #

Finding Customer number in SAP

Similar Messages

Maybe you are looking for