Finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

Press F1 within the application to open the Help section.
If you have specific questions ask them in the Acrobat forums (this is the Reader forum).

Similar Messages

How do I preserve the embedded hyperlinks when printing to .pdf?   I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it's just the flick of the right button – I just need help finding that

How do I preserve the embedded hyperlinks when printing to .pdf?
I am using Acrobat Pro XI for Mac, and when I export to .pdf the existing hyperlinks lose functionality.   I assume it’s just the flick of the right button – I just need help finding that button.
Can you help? Thanks!

How: MS Word to .pdf by Command P, hitting the PDF button, and then the button for "save as Adobe pdf"
I didn't have this problem at all on prior versions of Adobe on my PC.   This isn't a Mac attack, is it?

I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated. Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

I found the operating system very confusing and hard to use. No tutorial. Manual and online help were outdated. Tool bars, programs and documents randomly appeared and disappeared. Programs I installed completely disappeared. Anyone else experience this?

No need to apologize, Jim. I think your rant was justified. For years people have been telling me how easy the Mac was to use. Imagine my frustration when I finally learned from friends and users that it takes weeks or months to make the transition from Windows to Mac.
Still, I agree that I acted to too hastily when I returned my mini-mac to the store only three days after I bought it.
I'm going to try again, this time with an iMac. This time I'll keep it. Since this thread is for the mini-Mac only, I'll probably be starting a new one for the iMac.
Why did I decide to try again? Well, I do like the faster speed and compact hardware of the Macs. I also like the fact that I can install Windows and use that for my programs until I transition completely to Mac, IF I make the complete transition.
Thank you all for your suggestions and advice. I have paid attention to what you said.
Andy

I have Acrobat 9 Standard at work. How can I edit PDFs using this?

Part of my job entails creating PDFs of web pages and then deleting non-essential materials. But, I have Acrobat 9 Standard. How can I do this with what I have?

You can use the Text Edit tool to delete things. You can also redact items. Do not expect reflow to work, Acrobat is not a true editor, but has simple editing tools for simple fix ups. I would suggest downloading HTML source and editing that -- seems like a much simpler process. If someone (like a boss) is insisting you use Acrobat and get a PDF, then I would suggest downloading the HTML, editing it, and then create a PDF from that edited version. Probably a lot faster, though you may have to learn some HTML. Many tools like the HTML editor in SeaMonkey and other editor tools (DreamWeaver is typically recommended) can be used.

Is there a way we can use Acrobat Standard to assign a password for opening of signed PDF file once it has been downloaded from DocuSign?

Prior to implementing DocuSign, we used to scan manually signed document to a PDF file and then store the PDF file in a HR file share. We would then use Adobe Writer Standard to assign a read/write password to the PDF file. We now use DocuSign to have documents electronically signed and download the DocuSign PDF in our HR folders. However Adobe Acrobat Writer does not allow us to assign a password. It pops up a dialog box saying ""you cannot change security on this document because the document is signed or certified". We want to continue being able to store the PDF in our HR file share with passwords to restrict who can view off the share. Is there a way we can assign a password to the PDF file once it has been downloaded from DocuSign?

Thanks Bernd. We can't assign passwords before signature process starts as people will not be able to open the PDF without knowing the password. I think we will change our process and simply leave the electronically signed PDF in DocuSign and then "print" the PDF to our local file share for internal HR purposes. thanks again.

Need some tips for premiere cs6 video editing

I have recorded professionally in a sound proof room with a microphone mc's, it's really good video quality and the sound quality is perfect too.
I have recorded with 2 different devices at different angles i'm going to remove sound from both video clips and use the recorded mp3 file made in Adobe Audition CS6 (amazing program) I want to have the 2nd angle recording put in the video so it shows the main video then the 2nd in a little box in the top corner, how can i do this?
Also any tips people can suggest for me on Speedgrade CS6 or After effects CS6 that will improve the viewing experience will be very appreciated.
Last thing playback in Premiere and after effects is very slow, no computer faults my laptop is extremely fast but one thing i've had this laptop about 8 months and not updates the graphics card, would it be that or is there a way to fix this? when i try playblack in after effects it says something like '0.9/29 frames (not real time), i downloaded quicktime i thought this was real time?
Thank you in advanced

Here are some Tutorials
http://www.youtube.com/playlist?list=PL507B3498B4479B96&feature=plcp
http://forums.adobe.com/thread/913334
http://forums.adobe.com/thread/845731
http://forums.adobe.com/message/3234794
A "crash course" http://forums.adobe.com/thread/761834
A Video Primer for Premiere http://forums.adobe.com/thread/498251
Premiere Tutorial http://forums.adobe.com/thread/424009
And http://forums.adobe.com/message/2738611
And http://blogs.adobe.com/kevinmonahan/2012/08/28/free-video-tutorial-samples-from-learning-p remiere-pro-cs6/
-and more from Kevin http://forums.adobe.com/message/4714153
http://blogs.adobe.com/premiereprotraining/2010/06/video_tutorials_didacticiels_t.html
And http://blogs.adobe.com/premiereprotraining/2010/06/how_to_search_for_premiere_pro.html
And http://bellunevideo.com/tutlist.php
Premiere Pro Wiki http://premierepro.wikia.com/wiki/Main_Page
Tutorial http://www.tutorialized.com/tutorials/Premiere/1
Tutorial http://www.dvxuser.com/V6/forumdisplay.php?f=21
Tutorial HD to SD w/CS4 http://bellunevideo.com/tutorials/CS4_HD2SD/CS4_HD2SD.html
Exporting to DVD http://help.adobe.com/en_US/premierepro/cs/using/WS3E252E59-6BE5-4668-A12E-4ED0348C3FDBa.h tml
And http://help.adobe.com/en_US/premierepro/cs/using/WSCDE15B03-1236-483f-BBD4-263E77B445B9.ht ml
Color correction http://forums.adobe.com/thread/892861
After Effects Tutorials http://www.videocopilot.net/
Surround Sound http://forums.adobe.com/thread/517372
Photo Scaling for Video http://forums.adobe.com/thread/450798
-Too Large May = Crash http://forums.adobe.com/thread/879967
-And another crash report http://forums.adobe.com/thread/973935
CS6 http://www.dvxuser.com/V6/showthread.php?282290-New-Tutorial-Working-Faster-in-Premiere-Pr o-CS6
Video Scaling https://blogs.adobe.com/premiereprotraining/2010/10/scaling-in-premiere-pro-cs5.html
Encore http://tv.adobe.com/show/learn-encore-cs4/
Authoring http://www.videocopilot.net/tutorials/dvd_authoring/
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
And more Encore http://library.creativecow.net/articles/devis_andrew/
Regions and NTSC vs PAL http://forums.adobe.com/thread/951042
-and Regions http://forums.adobe.com/thread/895223
PDF http://blogs.adobe.com/adobecustomersuccess/2011/05/14/help-support-pages-for-creative-sui te-applications/

What do I need to do to read a Windows editable PDF file on a MAC?

I have an editable pdf file which I can read no problem on various Windows based systems. However, even after updating to the latest Adobe version for MAC (9.4: AdobeRdr940_en_US_i386.pkg) I can't open the file. I have OS 10.4.11 on the MAC Book (albeit it is an older version) and Safari 4.1.3.
Thank you for the help!

The PDF was likely "optimized" when it was saved, and was not made compatible with Reader 9 or lower. You need to contact the author and advise them to re-save it with the proper compatibility for older versions, since you CAN'T use any newer Reader version with 10.4.

Need suggestions for proofreading online help files

I have created online help docs off an on for many years...
and have contemplated this issue several times and never come up
with a really good answer.
Right now, the product manager is tryiing to proof one of the
online help files that i've COMPLETELY revamped and he's
complaining about the time this is taking and how difficult it is
because not all topics are in the TOC...
so I suppose i could regnerate the TOC and include EVERY
SINGLE topic... but I was wondering if anyone else had any other
suggestions for best practices when it comes to reviewing online
help files.
THANKS for any input you might have.

Umm!. I have to admit that I find your approach of adding ALL
topics to the TOC works as well as any. However it does cause
problems where one or more popup topics appear in the same topic.
This causes a bit of uncertainty unless there is a clear indication
in the topic where a popup exists and an understanding of what TOC
topic to look at. What I tend to do is have a piece of text (e.g.
see popup titled xxxxx) which has a conditional build tag on it.
Then you include the build tag when you compile. I also tend to
have all the popups in a separate book in the TOC. You can then
easily remove all the popups from the finalised output. It means a
bit of tossing and turning between TOC chapters but seems to work
reasonably well. You could also produce two printed copies, one
containing the popups and another containing the main topic
content. Hope this helps solve your conumdrum.

Just purchased a used G4 and need some help

First, let me say, that I am finally returning to the fold after years of working on a PC (employers insisted) but have just purchased a used G4 running OS 10.3.8 I've registered the G4 and everything, and tried to update the OS. I got a "mounting failed" message. It may be because the previous owner left a password in the automatic update file and didn't tell me what it was. Also, they did not provide me with the original installation discs so I could use administrator access to disable this password! Anyway, I want to update the OS as far as it can go - any idea how I can do this? I've searched around the apple site for a while now, seeing if I could purchase replacement installation discs, but can't find any into. If I just go ahead and purchase the 10.4 upgrade, can I install it without upgrading from 10.3.8?
Sorry if these are basic questions, but my last mac was an Apple IIc be kind.

Hello nebpen,
"While the lamp hold out to burn, the vilest sinner may return!"
Welcome back!
As the Texas Mac Man says, you need the install CDs (and Applerescue is a good source). Your DA will run any Apple OS out there at its latest update. I happen to prefer Panther, mostly, I suppose, because it's simpler ... or run them both!
Further, IMHO, the DA is the sweet spot in balancing cost and performance. I'm still feeling my way with upgrades, but every day mine seems to run better. I've just discovered how to adapt an 867mhz QS cpu, so the backup is now running faster than the Main Mac, and I even had to install Tiger (10.4.10) to take advantage of the latest Google Earth. What incredible pictures!
Anyhow, welcome!
Jon

Used iphone and need some help, please

i got a used iphone and im tryin to set it up, but the screen isnt turning on, i mean there is little light but cant see anything. what do i do ?

bring it back. Sounds like it's broken, doesn't it?

My Acrobat XI Stanndard will not open some .pdf. I get an error stating I MUST use Acrobat reader version 9 or higher. Help!

Any ideas?

Sorry, you MUST open this form using Adobe Reader (version 9.0 or newer).
Please ensure you have Adobe Reasder installed on your computer, and then
re-open using Adobe Reader

Need some Desktop Software Connection help.....PLEASE

Here's the deal. I've had my berry for a while, no problem. I used to be able to connect to my computer and use the desktop manager to swap photos, ring tones, music, etc between my comp and berry. I had some computer issues which involved me changing the power supply and video card as well as adding some ram.
Everything works fine, printer, mp3 player etc.
When I plug in my berry it doesn't do anything. It recognizes the memory card I have. But when I open up the media manager, it tells me there is no device installed, and all it sees is my media card.
Now everything works perfect on my wife's laptop (she has a berry too), but it doesn't work on mine. We both run old school 4.2 desktop software as well as the new 4.7+os.
I have uninstalled and reinstalled 4.2 twice, and it doesn't recognize my phone. I even go to connection settings and all it shows is COM ports. I found a USB option, but then it searches for the device and finds nothing.
So I decided to upgrade to desktop software 4.7. Downloaded it, installed it, and the same **bleep** thing happens. Doesn't recognize anything. Says I'm not connected. I'm starting to get really pissed off at this crap. I've never had any trouble before. I put 30 songs on here, and tons of pictures on my memory card...not a skipped beat ever.
I can easily go to my wife's laptop, plug in, and install/delete what I need and I'm done. The problem is none of my music/pics are on her laptop. SO I 'm having to bring them via Flash Drive to her laptop, and then install the items..but no luck on my comp.
I went to the control panel and did "add hardware" it showed a blackberry device was connected but it gave me the following error (using both versions of the desktop software)
"Windows cannot load the device driver for this hardware. The driver may be corrupted or missing. (Code 39)"
Please help before I get really frustrated and toss my berry.
Message Edited by imotionsrt4 on 06-02-2009 09:53 PM
Message Edited by imotionsrt4 on 06-02-2009 09:53 PM

Have a look at this KB article to see if any of the solutions help out.
http://www.blackberry.com/btsc/KB02640
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

I need some questions anserd PLEASE HELP

yo all, i have a 30gig ipod video and i have some questions which are hacking at my brain. i hope i can get some ansers
#1 apparantly, when i update itunes it wipes my libary clean? is this true?
#2 E.G:i go to my friends house, to get some songs, but he has a mac, and i have a pc, and when you download songs from your friends mac.. apparantly it wipes all your songs
since you have a pc and he has a mac! T OR F?
#3 when i connect my ipod it updates, but when itunes says "Ipod update complete, OK to disconnect" my ipod still says "Do not disconnect" is it really ok to disconnect?
#4 i have about 450MB used up on my ipod..and theres a thousand MB to a GB, correct? in itunes it says i have 26GB left when i havent even use up one!(although, i have itunes 6..and theres 6.3 or something..but i dont want to update due to question 1#!)

Hello ipodsrock_thecasba,
#1 Absolutely not true
#2 False. The songs are not being wiped because you have a pc and he has a mac. The songs are being wiped because you say yes to the message that pops up saying "this ipod is linked to another library, do you want to link it to this library?"
Read this for tips on using your ipod with multiple computers:
http://docs.info.apple.com/article.html?artnum=61675
#3 Not always. Could be another music program on your computer capable of reading the ipod is doing just that. Could be an antivirus program is scanning the ipods disk. If you can feel/listen to the ipod and the disk is not being accessed/spinning it should be safe to disconnect (you may need to reset the ipod afterwards).
http://docs.info.apple.com/article.html?artnum=93492
#4 Read this (particularly the third section "One more thing about iPod disk size"):
http://docs.info.apple.com/article.html?artnum=60955
Hope that helps
EDIT: Dude calm down. 8 minutes after posting your question and you are screaming for answers. I almost wish now that I had not bothered to take the time to even try to help.

How can I export from Excel to pdf using Acrobat Std to achieve uniform page size throughout the whole pdf document?

After exporting the whole workbook to a single pdf file, page sizes are inconsistent. When viewing the document in full screen, some pages show up as 25% zoomed, others as 34%. I could re-print the exported pdf file to pdf in Acrobat Std, and that way I could get the same page size throughout the document, but then I loose my bookmarks, which I don't want.
I have already set the page size to A4 in Excel, but that's not where my problem lies. any help, hint is appreciated.

A good place to start is Karl Heinz Kremer's blog, where he has a few examples:
http://khkonsulting.com/2010/09/reading-pdf-form-fields-with-vba/

Need some tutorials

hi everybody...
i am new to javafx...
and i want to learn this ....
so will u provide me some link that help me
to learn javafx step by step
thanks & regards
fun_with_me

[http://java.sun.com/javafx/reference/]
[http://www.google.com/search?hl=en&q=javafx+tutorial&btnG=Google+Search&aq=1&oq=javafx+tu]

Finding difficulty in using Acrobat Editor, need some tutorials or online help in editing pdf's

Similar Messages

Maybe you are looking for