Finding "digital single write.vi" and "digital group config.vi" for DAQ6507

i am looking for the following two vi's:
digital single write.vi and digital group config.vi, as mentioned and required by the example on:
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=B45EACE3E73956A4E034080020E74861&p_node=201227&p_source=External
can someone please help me with this?
thanks!
-gjs

Hello Gaurav,
After you install Traditional DAQ, you should have access to these VIs, if you installed the correct version of Traditional
DAQ for your system and LabVIEW.  The link given above is for Traditional
DAQ 7.4.1 which works with LabVIEW 7.0, 7.1 and 8.0.  If you do not have
one of these versions, the LabVIEW support is not installed and that would be
why you cannot open the example. 
Therefore, if you are using LabVIEW 6 and you want to run this VI you will need
to install an older version of DAQ.  To see what versions of Traditional
DAQ are available for your version of LabVIEW please look here.
You can find and download that driver from here.
If this does not help you out, can you please post back which version of
LabVIEW and Traditional DAQ you have installed?
I hope this helps,
Jesse O.
Applications Engineering
National Instruments
Jesse O. | National Instruments R&D

Similar Messages

  • PS Script to find the list of users and the groups in a Workgroup server

    Hi There, could you please explain on how to get a complete list of local users and local groups in a "Workgroup" server to which they belong to using Powershell. I'm able to get the users list but couldn't find any help in finding
    the script to find to which localgroup the user belong to. Anticipating your response. Also let me know the cmdlet for Win2k3 servers to find the same.

    Here's some code from David Pham (don't remember wher I fund this code):
    Trap {"Error: $_"; Break;}
    Function EnumLocalGroup($LocalGroup)
    $Group = [ADSI]"WinNT://$strComputer/$LocalGroup,group"
    "Group: $LocalGroup"
    # Invoke the Members method and convert to an array of member objects.
    $Members= @($Group.psbase.Invoke("Members"))
    ForEach ($Member In $Members)
    $Name = $Member.GetType().InvokeMember("Name", 'GetProperty', $Null, $Member, $Null)
    $Name
    # Specify the computer.
    $strComputer = gc env:computername
    "Computer: $strComputer"
    $computer = [adsi]"WinNT://$strComputer"
    $objCount = ($computer.psbase.children | measure-object).count
    $i=0
    foreach($adsiObj in $computer.psbase.children)
    switch -regex($adsiObj.psbase.SchemaClassName)
    "group"
    { $group = $adsiObj.name
    EnumLocalGroup $group }
    } #end switch
    $i++
    } #end foreach

  • How to find out which schema(time and payroll) is being used for which empl

    Hi,
      Can anyone tell me if there is any way we can find out which schema is relevant for which group of employees, for example in a system which has employees from different countries and for each country there is a diffrerent schema being used ?
    Is there any feature which defaults the schema names according to groups of employees ? If so what is the name of the feature?
    Regards
    QB

    hai
    generally  the schemas are named X000  which stands for common schema  nomination
    x replaced by respective country like for india it is IN00  for US  U000etc
    it is not given according to the group of emplyees but according to the country grouping for your org units
    time schemas are country independent they work for all the countries
    regards
    nalla

  • Is there a "splitter" for the optical out - I need to send the digital to my receiver AND need an analog out for a speaker?

    I'm trying to optical out from the TV to my receiver and then need an analog to go to a speaker.   My audio visual guy says there isn't one.  
    Thank you for any assistance.

    https://discussions.apple.com/thread/2605624?start=0&tstart=0
    thats as much off you can turn it

  • Since updating to 8.0.1 I find I have to stop and reload pages in order for them to load.

    Every time I go to a site I end up having to stop loading and then reload a page before it will come up. I have waited as long as 2 minutes to see if the pages will come up. It especially happens when clicking on a link. The link can be from google or a web page. I did not have this problem before updating to 8.0.1

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.com/kb/Server+not+found
    *https://support.mozilla.com/kb/Firewalls
    You can also try to reset (power off/on) the router.

  • What should I do if I find my submitted App crashes and it's in "Waiting for Review" phase?

    Hello All,
    I submitted my App and I recently found it crashes at a certain point.  What should I do?
    I was thinking about "Rejecting the Binary" on iTunes Connect, then resubmitting a new binary.
    Your thoughts.
    John

    Reject it yourself, fix the bug, do more testing, and resubmit.

  • I am trying to use an external HD and need to configure it for the MAC. Can someone explain how to configure the HD (Western Digital - My Passport SE)?

    Can someone help explain how to add an external HD to the Mac? I have a Western Digital My Passport SE and need to configure if for the MAC and add it to the HD location on my Mac.

    Connect the external drive to the Mac. You can do that while the Mac is on, (If the drive is one that has to be plugged into a wall outlet do that too and turn the power on.) If there is a light on the drive it should turn on.
    Now double click on the hard drive icon - top left of the screen of your computer. When it opens look for the Applications folder. Double click that. Next look for a folder called Utilities. Double click. In there you will see a file called Disk Utility.app. Double click on that.
    You will now see something like this, with two items on the left. The second one is your new drive.
    Select it - one click. And click on Erase - one of the buttons at the top, You will see this.
    You must select the Format, it's a drop down - the one shown in the image above is best. You can change the name from Untitled if you want. The name can be changed later if you prefer.
    At this point look at the bottom right. There is a button there called Erase. Click on it. Then go get yourself a cup of coffee - this will take a few minutes.

  • New user of G4 - need advice on selection of printer, DV and digital camera

    I am a recent convert to mac and need advice from experts on the following:
    I plan to use my G4 MDD primarily for home computing, experimenting with digital photography, create DVDs and explore multimedia primarily as a hobby. Please advice me on selection of a decent digital camera and or a DV camera. I am not sure if I have a decent DV camera - whether this will be good enough for still photos as well. My G4 has firewire ports.
    Also I am interested in buying a printer that I can use with my mac as well as connect to a two other windows systems. My printing needs are primarily documents and maybe photos.. I think that going in for a laser printer makes sense in terms of reliability .
    I am not looking for the highend equipment - willing to spend upto 750 $ on all items. Thanks in advance.

    raja,
    welcome to discussions.
    Digital Camera, DV camera and colour Laser Printer all for $750 ??
    I'm afraid you'll have to go for an inkjet printer if you want colour photos. Expensive doesn't even begin to describe Colour Laser Printers. HP make good printers, but tend to be a bit more expensive to run, Epson make excellent photo printers, are are a bit more economical to run, take a look at the iP4000 and iP5000. I still use my old HP DeskJet 1200 (does A3), and a DeskJet 970Cxi (everyday), both use the same cartidges. These are about 7 years old, there are modern versions retailing now at about half of what I paid for these then(always the case).
    Digital cameras can be decided by what purpose you intend to use them for. I have an 18 month old Nikon D100 digital SLR. 6M pixel (which was a lot then) but that might not matter, it takes Nikon lenses (and other manufacturer lenses to the same spec), so I can shoot with a 300mm, 400mm, 600mm lens. Nikon has a D50 out now, a cheaper, newer version of my camera. I can print A3 photo real from 6M pixels and with the right lens I don't need to crop my pictures too much. If you want to print photo real A4 (and that's a LOT of ink) a 3-4M pixel camera would be fine. Most cameras now are 5-8 M pixel, this is because the pictures they take have to be cropped drastically because they have an inadequate lens. On top of that my Nikon takes really great pictures, better than any of my other digi cameras (but not as good as my ancient Olympus 35mm muji-zoom compact with 200 film).
    So if you're going to take a lot of close ups in well lit areas, product shots, interior shots with flash, ie. "snaps" rather than photography, any cheap digi camera will do. Good points are
    - USB / Firewire connectivity,
    - non-proprietry battery technology, ie. it uses 4 x recharable AAs instead of a battery that only fits that camera, and it comes with a AA recharger.
    - non-proprietry storage technology, ie. it uses Compact Flash or some other that is used by a large portion of cameras, rather than just be that manufacturer.
    - digital zoom is worthless.
    If you're doing outdoor photography, wildlife, landscapes, etc, you may want something with a changeable lens and SLR technology, a digital SLR. Not all digital SLR cameras have changeable lenses. Same good points as above, but be prepared to sacrifice one of the points for a good camera. Heavy cameras are easier to hold steady with a big lens, so try for a metal case (it'll be coated in plastic anyway).
    For outdoors the most important thing is the amount of light entering the camera (indoors you can control the lighting with flash / fitted lighting), digital SLRs can have enormous lenses (my 28mm hyperzoom lens has a 72mm diameter), compare this to a compact digital camera with a 12mm diameter lens, I take 36x the light of a compact. And it shows in the picture quality.
    I'm a complete duffer with DV cameras so I won't lead you astray with this, but be aware some do offer the option to take digital pictures. Indeed some digital cameras can take low quality short movies.
    Let us know if you have any more questions.

  • Not able to use Shift field and Shift Grouping field while using OPK0

    Hi,
    I am using the SAP ECC 6.0 Enhancement Pack-4,
    In Transaction 'OPK0' while confuguring the default value for shift in the *Default* Tab, i am getting the 'Shift - field:SHIFT_PROP('Proposal Shift for Single-Screen Entry') and Shift Grouping, in Display mode, i have also tried to configure it with SAP4all  authorization, but still it was in Non editable mode.
    Also i tried applying Note:1177952, but was not able to apply the same, as we are already using Enhancement pack-4.
    let me know the solution to the above problem.
    Best Regards
    Vijay

    Hi Vijay,
    please follow the link given below and check whether the business function LOG_PP_SRN_CONF is activated or not?
    http://help.sap.com/erp2005_ehp_03/helpdata/EN/e9/dc4715919d4245a9416c668b66133c/content.htm
    Regards,Kundan

  • Diappearing photos replaced by an exclamation point within a triangle.  Prior to loading Lion I could put the image number in finder and locate the original file for that photo.  How do I restore photos now?

    I had problems with photos disappearing and being replaced by an exclamation point within a triangle.  I can see the photo in the thumbnail summary but when you click on it, the screen goes black and the exclamation point within a triangle appears along with the info on the original image number (i.e., img_1120.jpg). Prior to loading Lion, I could go to Finder, enter the image number and locate the original file for that photo.  I could then restore it for editing, copying into Print Shop directly, etc.   That no longer works after installing Lion.   How do I restore photos now?  I have 100s of photos that I have been going back to the original files and restoring and I am frantic that I will no longer be able to get to the original files.  Please help!  Thanks

    The ! turns up when iPhoto loses the connection between the thumbnail in the iPhoto Window and the file it represents.
    What version of iPhoto? Assuming 09 or later:
    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
    Regards
    TD

  • Valuation Group and Tolerance Group - FS00

    Hi all,
    Can someone please tell me what the field 'valuation group' and 'tolerance group' are used for? I've found a brief description online, but if you could provide me with an example that would be great.
    thanks,

    Hi
    We will use Tolerance group for below mentioned activities
    the maximum document amount the employee is authorized to post
    the maximum amount the employee can enter as a line item in a customer or vendor account
    the maximum cash discount percentage the employee can grant in a line item
    the maximum acceptable tolerance for payment differences for the employee
    For Valuation Group suggest you to refer below links
    Valuation group code in Account determination?
    Regards
    Praveen

  • If I only want to write documents and surf the web.

    Do I have to buy any software if I only want to write documents and surf the web?

    For surfing the web no.  For writing documents you have a number of choices.  Youu could buy microsoft word, it is very expesive but some do like it because it is the same as they have a t work.  the second option and the one that I prefer is apple's Pages.  It is available from the app store and is a very good full features program.  The third and the free option is down load open office for mac, which is pretty much like microsoft wod.

  • AO Group COnfig Error

    I have created a sine and a square waveform according to the user requirements but when i write the two waves to the AO generate waveforms i get an error saying AO config error. I have also configured the input channels using AI config and other input SUb vi's. I dont knwo what to do.

    Vaidehi,
    Are you using LabView 7.0 or newer (with DAQmx) or are you using an older version of LabView that only has the Traditional DAQ? Either way, there are several examples of analog waveform output included in LV. You can find them in the help menu under "Find Examples."
    You coud get the AO config error for several different reasons. Its very hard to tell what it is without having the code. Are you doing simultaneous AI and AO? There is a shipping example for that also.
    If you can't get this solved using the shipping examples please feel free to respond to this with your code attatched. It may give me some insight into whats going on.
    -Sal

  • Write to serial port and digital port at the same time

    hello,
    I need to write to the digital port and the serial port at the same time. Right now I have the two vi's (to write to the serial port, write to the digital port) in the sequence structure. First I write the digital port, then write the serial port. Using the oscilloscope, the interval between these two executions is 10 ms; and I need to reduce this interval to as small as possible. I would appreciate help in any way. Thank you.

    Hello;
    This is a little tricky. Since the transition from one sequence to another is completely Software timed, and windows manages all tasks that are running at one given time, there isn't a method to reduce that transition time.
    The most you can do is try to optimize your code so all the time expent on the transition is due only to the task management.
    Hope this helps.
    Filipe A.
    Applications Engineer
    National Instruments

  • I have adobe digital edition 2.0 and I am trying to authorize my erreader, but I am unable to find the 'manage library' before I open ADE.

    I have adobe digital edition v2.0 and I am trying to authorize my erreader, but I am unable to find the 'manage library' before I open ADE.  Where to I find the 'manage library'? and should I upgrade the ADE to version v1.7.2.?

    To make Mail quit you'll need to perform a forced quit or, failing that, a forced shutdown.
    When an application won't quit you can hold the Command and Option keys together and then type the ESC key. This (usually) brings up a dialog with all the running applications. Select the offending program and click the Force Quit button.
    If this doesn't force the application to quit (quite rare) or if you cannot get the Force Quit Dialog to pop up, hold the power button for about 10 seconds to shut down the entire computer. This should be a last resort but sometimes is necessary.

Maybe you are looking for