Finding Flash Installation, alter settings and use with webcam
I am running on Windows 7 using Chrome. I am doing a course where I need to send information from my webcam to a website. I downloaded Flash Player and somewhere on the website it had a section where it had the address of the university. It also had another address not applicable so I deleted that and in doing so also deleted the address of the uni. I know diddly squat about both the webcam and Flash and am really running out of time to submit my assignments. Flash did unload on my computer, but to where, I have no idea. I have done searches but it nothing. So that took most of yesterday. Today, I researched it further and it was suggested that Flash was incorporated in Google and was enabled by fault and included in Chrome system updates. So I went into plug ins and find the Flash listing is enabled. There is also only one listing on the plug ins in spite of me downloading one yesterday and it is supposed to be on Chrome as well. .Bottom line ..... how do Flash and the webcam work together? How do I reinstall the university's web address on Flash, does it automatically attach itself to webcam and then do I get the option of who I share my webcam work with. Hope you can understand all this because I can't and I am getting a mighty nervous about getting these assignments out. Many thanks
This is the Shockwave Player forum; your question should be posted in the Flash Player forum.
Similar Messages
-
Flash 10 install issues and use with PowerPoint
Hi feeling really frustrated now and I'm keeping my fingers crossed for a quick solution.
I'm running Windows 7, Flash 10.0.32.18 (now the Beta 10.1 in desperation) and I haven't had to reinstall flash on start up until last night so that was an unfortunate down turn of events for me and not even the reason for searching the forums.
My issue started as I stood in front of one of my classes (I work in a College) with PowerPoint 2007 and a lesson ready to go and the Flash images that had always worked refused to be anything other than a still image with no interaction.
Unfortunately when I upgraded to Windows 7 I carried out a clean install and reinstalled Office along with the latest versions of Flash, Shockwave etc. I say unfortunately because I now have no way of knowing where the problem lie. On asking, Microsoft are adamant that it is an Adobe issue and the forum would seem to back this up.
On investigation I found that when looking at a slide the object was identified as a Flash object but I can't view any properties, also 'insert a shockwave flash object' is not available in the control toolbox. This would indicate that Flash is not installed even though viewing flash on the internet has not been an issue.
The last issue that may help toward a solution is that when trying to view an .swf file I'm informed that I need to have FlashPlayer installed (I have) and when trying to use a third party flash player such as SWF Opener it also asks me to install flash.
Like everyone else here I've installed, uninstalled all Flash etc. more times than I care to remember now.
I'm not that technically minded when it comes to the nitty gritty of software operation and programming, I just like things to work.
Please help as the most important thing I use my laptop for I now can't!!!!gm377!!!!
Yeahhhhhhhhhhhh!
Talk about famous 3 words, It's All Fixed is what I love to hear ! Well good for you, bet you are glad
that is done and as I like to say when all of the ducks are in a row, FP is a piece of cake! It is always
the ducks that cause the problems.
You asked about the dates in manage add ons, as far as SFO is concerned and FP 10 it is more exact
to look at Add/Remove, the screen shot I have shows Adobe Flash Player 10 Plug in and the date is
11/18/09 probably when you did one of the Un/In stalls or the beta and it logged the correct version
there in Add/Remove. However in the 1st screen shot of add ons, SFO is not even listed, probably due
to the Uninstall and Reinstall actions. I have noticed Windows updates are listed in my Add/Remove, not
when I install them, but when Microsoft issued them and maybe Adobe does the same thing. Then I have
XP3/IE6, so you have differences there too. In my add on for example, no dates are shown and when I
updated my SFO Active X (I can do that with IE6:-) I know when I did it. Even though you had Shockwave
Flash Object listed you did not have the Flash10c.ocx which is the ActiveX CONTROL, the engine if you will
that Flash Player 10 works together with so all Flash websites, youtube, etc need. Think of having a gas pedal
and no gas in the tank, everything works together:-) The plug in you installed today was the Flash10c.ocx, the
gas. Go look.
Hey are the slides working now too?
Ok, I'll take a Christmas card
Well thanks for the "star" and appreciation and the best to you!
eidnolb
(I had some problems with fitting sentences and links on the posts today, that's the reason for the half sentences & funny looking paragraphs)
Message was edited by: eidnolb to add a comment -
Flash doesn't work and work with another browser!!
''locking as a duplicate of - https://support.mozilla.com/en-US/questions/900202''
Flash doesn't work and work with another browser!!.
The message is " An error occurred, please try again later" just with youtube. Other sites work. Another browser works with youtube!!Whay do you mean "difficult with the camer?"
Two things that might help. Reset all your settings and reset the phone. Use the Settings app to reset all settings. Settings > General > Reset > Reset All Settings Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that helps. -
Ooops, guess I didn't need to post everything in the title - sorry! I bought the pages app - but couldn't save or print so with some online searching found that I had to uninstall the iWork trial which had expired. I did that - but now I can't figure out how to re-install the pages app!! The app store says it's installed, but I can't find it anywhere to open and use it. I'm not very computer savvy - and am a first time Mac user and am getting extremely frustrated! I e-mailed some help center and they can't seem to help me either. I would appreciate any help/advice that can fix my problem - thanks in advance!!
OK Apple has stuffed up the demo version upgrade process so the first thing you need to do is get rid of the demo.
That includes getting rid of the files in the system.
The instructions how to do that are here:
Note That where you see / that is the sequence of folders, each nested inside each other.
User/Library/Preferences the com.apple.iwork.Keynote.plist
Means the User (you, the little home icon, whatever you are called on your computer) then the Library folder inside that and then the Preferences folder inside that.
Lion initially hides the System folders from you so you have to go to the Finder > Menu > hold down the option key and click on GO > Library to see it.
Peter -
Can I store iphoto pictures in time capsule and use with pad
Can I store iphoto pictures in time capsule and use with pad
We can tell you that it is possible to store separate images on the Time Capsule drive. If however, you are asking if you can access separate images from your Time Machine backups on the Time Capsule, this is not possible.
How you get the images that your want from iPhoto on your Mac to the Time Capsule drive is a question for the iPhoto experts. It will likely involve "exporting" the files that you want and then moving them using the Finder to the Time Capsule drive.
How you access those images on the Time Capsule from an iPad is a question for the Using iPad experts. -
Saving Settings for use with Export using Quicktime Conversion
Dear All,
Is it possible to save a set of settings for use with the Export using Quicktime Conversion feature? The reason I ask is that we have to export a quicktime of every tv commercial we make (using the same settings) and it would be great if "one click" could deliver the export settings we need.
All the best, SeanWell, you can create a droplet from Compressor that would do what you'd like...
Open compressor and in the Help menu, Select the user manual. Navigate to page 315.
Jerry -
IPad showing photos in about settings and using gb space despite being deleted
iPad showing photos in about settings and using gb space despite being deleted
And it is not Photo Stream photos that you are seeing reflected?
Try resetting your device(nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, see if the issue is resolved.
If it isn't try syncing with iTunes on the computer you sync with, and uncheck "Sync Photos". See if that clears it up. If it does, then re-sync the photos that you want.
Cheers,
GB -
I am trying to install Adobe Reader my wife's laptop but "installer" hangs up and fails with a blank black screen. The machine is capable and has a Vista OS. My wife blames the machine and wants to "throw it out." She's an idiot but I need to get this fixed.
run the cleaner (Download Adobe Reader and Acrobat Cleaner Tool - Adobe Labs) and then retry installing.
-
how do I connect TC to a new ethernet and share a new ethernet DSL with a new PC and use with my macbook Pro? I tried and get no internet on the PC or Macbook Pro?
Ok.
I am connected to wi-fi through TC connected to a specific router and is working perfectly and saving data through TM without any issues.
The TC version is 7.6.1 and am using OS 10.7.3
The router mode is on Bridge mode and router is connected to TC through USB cable, I suppose for internet access. My Mac is on wi-fi through TC
I have another location, much further, which recently have been installed with wi-fi through router that has WPA accessibiulity with password, 100% different than the current one.
Since, I will be most of my time in this new location, I wish to move my TC to this new location, and configure it in similar fashion like what I am having right now.
Naturally, I do not wish to lose any saved data on the TC.
Hope I managed to provide enought info.
Thanks in advance -
I Have iPad4 and using with Aricel Prepaid 3G SIM, How to check my VAlidity period and balance amount through iPad?. pls help me, M.Kumar, Chennai,
<Email Edited By Host>There are 2 concepts attached to a bank balance. The balance as per your books of accounts and another is the balance maintained with the bank. I believe i need not explain these 2 concepts. These 2 balances can be obtained from Oracle system provided some of prerequsities are met with.
Balance as per your books - This is nothing but the GL balance available. In order to obtain balances for each bank accounts, it is advised that each bank account should have a separate account code combination. This is achieved generally by having a separate natural account for each bank. The code combination is attached to the cahs account for each bank. By maintaining separate account code combination, the balance in each code combination can be obtained from GL (provided transactions are accounted and posted in GL). These balances represent the balance for each bank according to your books of accounts. You can create an FSG for this purpose and provide the same to the customer, so that they can run the same whenevr they want.
Balance as per bank - This balance is maintained by oracle in 2 ways - either the bank balance can be manually entered for each bank account for each date (quite cumbersome). Else, while loading the bank statement, the bank balances are also loaded. There are various types of bank balances stored - value dated balance, available balance, float balance etc. Depending on the balances provided by bank along with the bank statement, the bank balance can be recorded in oracle system. After the bank statement is uploaded and balances stored, standard cash management reports are available to query for the bank account balances. In order to view daily movement, the bank statement should be loaded on daily basis.
Hope this helps.
Vinit -
I spend 5 months in Florida and 7 months in Ontario, Canada. Can a Verizon Samsung Note ll be unlocked and used with a sim card from another carrier in Ontario?
Yes, you should be able to use a local SIM card from a carrier in Ontario. You should not have to do anything prior to doing so.
-
HT1937 hi i wont to unlock my iphone and use with another sim /in another country/
hi i wont to unlock my iphone and use with another sim /in another country/
Then call the carrier it is currently locked to. They, and ONLY they can process an unlock request for you.
-
Finding Flash Player to alter setting and connecting to webcam
I am running on Windows 7 using Chrome. I am doing a course where I need to send information from my webcam to a website. I downloaded Flash Player and somewhere on the website it had a section where it had the address of the university. It also had another address not applicable so I deleted that and in doing so also deleted the address of the uni. I know diddly squat about both the webcam and Flash and am really running out of time to submit my assignments. Flash did unload on my computer, but to where, I have no idea. I have done searches but it nothing. So that took most of yesterday. Today, I researched it further and it was suggested that Flash was incorporated in Google and was enabled by fault and included in Chrome system updates. So I went into plug ins and find the Flash listing is enabled. There is also only one listing on the plug ins in spite of me downloading one yesterday and it is supposed to be on Chrome as well. .Bottom line ..... how do Flash and the webcam work together? How do I reinstall the university's web address on Flash, does it automatically attach itself to webcam and then do I get the option of who I share my webcam work with. Hope you can understand all this because I can't and I am getting a mighty nervous about getting these assignments out. Many thanks
This is the Shockwave Player forum; your question should be posted in the Flash Player forum.
-
I don't remember if there was a software update around the time this started happening. i did only used to have an AIM and gmail account linked to it, I added another Google account and that's when the Jabber thing popped up, I don't believe I ever saw it before then. other than that, it is the only issue I have had with the new software, and it very well could be operator error, i just cant seem to find anything about sms messages in the settings
Hi,
The iMessages account can do SMS (Text Messages) in Yosemite if you have an iOS 8 iPhone that have been linked.
To do this you need to Enable text Forwarding on the iPhone - which in turn triggers the Code Number to appear on the Mac version which you copy back to the iPhone dialogue box.
If it is On on the settings on the iPhone then you should be able to select the Mac that is linked.
You may find it has become Unlicked and you need to Reset. (turn the Function On again and then ask it to connect to the Mac in question and wait fro the number).
I just checked mine and it had become Unlinked again (I am not sure of the trigger for this)
8:33 pm Thursday; December 25, 2014
iMac 2.5Ghz i5 2011 (Mavericks 10.9)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad -
Lazy Nezumi - settings for use with CC
I am finding it hard to find my way round way this software - the incomprehensible (to me) manual doesn't help - and I'd be grateful for a steer on what are good default settings for smoothing curves in freehand drawing. None of the settings seem to help or have a simple and useful effect for freehand work.
Can I assume that it only works with the brush tool and not with other tools like the Art History Brush?
I know Trevor D has mentioned this software a couple of times.
Thanks.David, you had me wondering there. I don't think I have ever used the Art History brush. I did try though, and initially thought LNP did not work with that tool, but with high settings I could see that it does.
For smooth lines use the Massive Smooth preset with mode set to Moving Average. The default values are good for the Brush tool, but seem to work better with much higher 'Amount' setting for the Art History brush. But I have no experience with the Art history brush, and don't even have a clear idea how it works.
Lazy Mouse with the Pulled string mode, are used for smooth lines with abrupt changes of direction. You have to stop and move the cursor back a touch to take the tension out of the pulled string. Then move in the new direction and when the pulled string becomes taut the line will follow the cursor again.
Actually, the animated gifs on the site explain it better than my words
Pulled String:
Moving Average
Moving Average + Catch Up
I don't think that Guilaume ever sleeps. He has never taken more than 30 minutes to reply to an email, even on Christmas day! He is super helpful, and tends to respond immediately if you use the LNP Chat facility.
If you check out the Feedback page, you'll find lots of LNP users that do 'similar' work to you, although I have to say none that were quite like your beautiful painterly type artworks. You'll possibly recognize some of the names, and maybe swap some ideas with them. It's quite a little community, but there isn't a forum unfortunately.
I am not sure how relevant they will be to your work, but do check out the Constraint presets. For line drawing I find they are really useful.
Lazy Nezumi Pro - User Testimonials
Having spoken nicely about your work David, it's only fair we let other users take a look
New Artwork photoart,digital painting,drawing,sketches,
But bottom line is to not hesitate to contact Guilaume if you need help. He will definitely get back to you.
[email protected]
Maybe you are looking for
-
Premiere Timelines - Best Practice and Workflows
Hello all, I am wondering if you can offer some advice. I have been a Final Cut Pro 7 user my whole life - and more recently FCP X. We are currently looking into the possibility of switching some of our programs over to Premiere because it seems to h
-
How do I set up a separate user
how do I set up a separate user on my imac ?
-
I'm planning to buy a new retina display macbook pro, but I have a thunderbolt display and I use the display's power cable to supply the power to a macbook air. As the power connector on the new macbook pro is differet, It looks to me that I won't be
-
everytime i try to restore my ipod the first step is fine but then it just stops and says error. Is there any way i can stop this?
-
Hi, we have a problem using airport and pppoe via chap. So we see the WIFI and we are connected but when we start the pppoe connection the passwort will not be accepted. Is tiger supporting chap, ms-chap1 or ms-chap2 ? thanx Mac OS X (10.4.6)