Finding FLASHBACK ARCHIVE grants in the dictionary

How can I find the results of these grants in the data dictionary?
GRANT FLASHBACK ARCHIVE ON xxx TO yyy;
They do not seem to be in DBA_TAB_PRIVS.
Thanks,
Mike

See http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/statements_7002.htm#BABGIIIA
which says:
flashback_archive_clause
You must have the FLASHBACK ARCHIVE object privilege on the specified flashback data archive to specify this clause.
or http://docs.oracle.com/cd/E11882_01/server.112/e26088/statements_9013.htm#BGBCIIEG
which includes:
FLASHBACK DATA ARCHIVE PRIVILEGE
The following flashback data archive privilege authorizes operations on flashback data archives.
FLASHBACK ARCHIVE
Enable or disable historical tracking for a table.
This is the object-privilege grant I am trying to locate in the data dictionary.

Similar Messages

  • Catalog Deployer - Migrating Agents . . . wheres the Dictionary?

    Catalog Deployer - Migrating Agents . . . wheres the Dictionary?
    With version 2008, we are able to migrate the agents from one environment to another, however I have not been able to find a way to migrate the Dictionary that each agent uses.  Is there a method to migrate the agent dictionaries?     Service dictionaries are migrating when you assemble a service package,  but the Agent package doesnt include the dictionary.

    No. If it's a standard adapter and you made some changes to its properties (possible but not usually recommended), you would need to re-enter the properties in the target environment.  If it's a custom adapter, use the same procedure you used to install the adapter in the initial environment in the target environment.

  • How to grant corporate accounts access to the Office store to install the Dictionary in Word 2013 (365)

    We are currently migrating from Office 2010 MSI to Office 365 (2013) click to run installation deployed with Configuration Manager.  I was curious if there was a way to grant our corporate accounts access to the Office store to pull in the Dictionary
    and other tools not baked into Office 2013 (365).
    The only way I have been able to do this is to have a separate Microsoft account to install the Dictionary. 
    Thanks,
    Brita

    Hi Brita:
    With which accounts you set up your Office client, Office 365 subscribe account or your corporation account? Have you set up
    directory synchronization for Office 365? Per my experience, if the directory synchronization has been set up, your corporation accounts will be associated with Office, therefore no need extra effort to install apps from Office store,
    you can simply insert apps available in Office store to word in your case. If I misunderstood the situation, please let me know, thank you.
    For Plan for directory synchronization for Office 365 please refer to
    this article

  • How do I find the lookup history in the dictionary come with OSX 10.6?

    I have spent couple of days to find out how to get the lookup history in the dictionary but with no luck.
    The dictionary come with the OS X is brilliant. For the purpose of review the words I have lookup before, I guess there must be a way to check the history, as every time when u put the '<' button on the application, u will be able to find the words u searched recently. I wonder where the app keeps those information, so I can copy them out to a list.
    Thanks a lot!

    For all the machines that are the same, set one up the way you want and use Firewire cable between two iMac's.
    Hold T boot the second iMac into Firewire Traget Disk Mode, it's boot drive appears on the desktop of the first iMac.
    Next install Carbon Copy Cloner on the first iMac, talk with them about a volume license as your going to need it.
    Use the default CCC setting and CCC the first iMac to the second iMac's boot drive. All accounts, programs and data on the second iMac will be erased for what's on the first iMac.
    Now take those two iMac's and CCC to 2 more iMac's, then those 4 to 4 others, and that 8 to 8 others and so forth. Should be done in a day.
    On each machine your going to have to setup a different named account for each machine if they are going to be networked, the process above is for main Admin user, programs and OS X transfer.
    This method only works via the exact same model/year of Mac's, won't work if they are different, for that you setup a new one and clone that to similar machines of the model/year.
    If your uncertain, look under Apple menu about this Mac > more info for a model like "iMac 4,1" for instance.
    Good Luck

  • 1.) How do you find the dictionary in Apple Mail Program?  2.) How do you add another dictionary?

    1.) How do you find the dictionary in Apple Mail Program?  2.) How do you add another dictionary?

    Hello James!
    I do not have any ABAP Instance, only the JAVA one.
    Therefore the ABAP transactions are quite useless.
    The problem tables are created by people working on the CAF layer.
    They have developed and deployed some homemade applications and this is leftovers from their development in some kind of way.
    Anyone with any ideas?
    Could it be that (yet) some special Portal Dictionary Role needs to be asigned to the Administrator?
    /Lasse

  • Sync archive is successful, but cannot find latest config file in the config viewer

    Sync archive is successful, but cannot find latest config file in the config viewer, Prime LMS 4.2.4

    Hi,
    Go Admin > Collection Settings > Config > Config Archive Settings
    Make sure   enable shadow directory is Checked
    Also check you have folders like shadow , devfiles ..etc under NMSROOT/CSCOpx/files/rme/dcma
    If these folders are missing ... then it is a database issue..
    if files and folders are fine then check if it happening for any particulr device or set of devices or all the devices ?
    Thanks-
    Afroz
    ***Ratings Encourages Contributors ***

  • How to find flashback space

    1) Could someone tell me the steps using GC how can I find how much flashback space I have allocated and how much is left.
    2) Also if you can tell after removing old archives how can I reclaime space for flashback space.
    Thx

    Hi,
    1) Could someone tell me the steps using GC how can I find how much flashback space I have allocated and how much is left.
    Use v$recovery_file_dest and v$flash_recovery_area_usage.
    2) Also if you can tell after removing old archives how can I reclaime space for flashback space.
    Instead of removing old archives manually, set the retention policy in rman and depending upon the recovery windows the old archives will be obsolete and u can delete obsolete files through delete obsolete.
    HTH
    Regards
    Jafar Ali

  • Can someone post a .pkg of the Dictionary for OS X Tiger?

    My efforts to find one already available didn't turn up anything. I'm trying to help a friend who's dictionary has mysteriously vanished and it would just be easiest to re-install the Dictionary application. Of course I could use Pacifist, but I have OLD install disks that don't have it, and he doesn't have his install disks.
    Thanks!

    Components of OS X cannot legally be distributed outside of the installer for OS X. But you can replace lost or damaged parts.
    How to Use Pacifist to Replace Deleted or Missing OS X Components
    Insert the OS X Installer DVD into the optical drive. Use a simple utility like TinkerTool to toggle invisibility so you can see invisible items. Alternatively, open the Terminal application in your Utilities folder and at the prompt enter the following:
    defaults write com.apple.finder AppleShowAllFiles Yes
    Press RETURN.
    To turn off the display of invisible files repeat the above command substituting No for Yes.
    The install packages are located in the /System/Installation/ folder on the DVD.
    Download the shareware utility Pacifist from VersionTracker or MacUpdate. Use it to extract a fresh copy of the missing item(s) from the file archives on your OS X installation DVD. The file archives are in the /System/Installations/ folder (use Go to Folder option in the Go menu of the Finder.)
    Here are Four Basic ways to use Pacifist (courtesy of George Orville.)
    A. Drag a .pkg icon onto the Pacifist window .....proceed to step 7.
    B. Click on “Open Package ....” and navigate to package desired and click “Open” in the open/save window.....proceed to step 7.
    C. Insert Mac OS X installer CD and when it mounts, navigate to .... Menu->Go->Go to Folder.
    In the path field enter or paste ....
    /Volumes/disc name/System/Installation/Packages (where disc name is the name of the CD/DVD that you inserted.
    • Click on the "Go" button .....
    • Drag a .pkg to Pacifist..... proceed to step 7.
    The package you'll need will have to be discovered by trial and error, but for most applications you should start with the Essentials.pkg and/or Additional Essentials.pkg.
    D. Insert your Mac OS X install disk 1 .... and open Pacifist.
    1. In Pacifist, select "Open Mac OS X Install Packages" ... dialog may appear asking for disk 2, then disk 3 and finally disk 1 again.... {if DVD is not used)...If “Stop Loading” is selected...the procedure will stop!!!
    2a. When loading is complete, a new window appears, click the triangle to display contents of each package...Select item and proceed to step 7.
    2b. or click the “Find” icon in the Pacifist window and type the name of the software you need.
    3. In the list that comes back, click the top most entry for the item that you want. ..... that is the one for the English language.
    4. On the top of the Pacifist window, click “verify” .... you will probably be prompted for your password.
    5. Enter checks for.... “verify permissions” and “verify file contents.” and click “verify” ....enter password when prompted.... you will get back output which may look like this:
    20 files were scanned.
    20 of 20 files were present on the hard disk.
    0 of 20 files had file permissions that did not match those specified in the package.
    0 of 20 files had checksums that did not match those specified in the package.
    6. Click “close”. Go to step 7.
    Extract or Install........
    7. In the Toolbar (upper left), you now have the option to extract or install. Click a file in the lower list and those two icons will be enabled.
    8. If “Extract to...” is selected.... navigate to the location where the file will be placed, select “choose”, select “extract” in new dialog that appears,authenicate , if prompted, click “OK”.
    9. In the next dialog, click “Extract”.
    10. If “Install” is selected... dialog will appear with the location/path of the installed software. Click “Install”
    11. Type in your password, click “OK”
    • Pacifist will begin to extract files.
    12. In steps 8/10ß.... you also have the choice to “cancel”
    Notes.....
    • Pacifist may find that a file it is installing already exists on the hard disk. Pacifist will present you with an alert panel....
    Stop
    Leave original alone
    Update ..... Default selection
    Replace .... Replace option should only be used on full install packages

  • How to find out which user has the permission to execute startsap ?

    Hi All
    How do I find out which user has the permission to execute the startsap and stopsap? Do I control the permission on those script using windows standard authorization? For example: only allow certain user have the read and write permission?
    Thank you.!
    Vincent Lo

    Well to me this is really weird question..
    <b>noone un-authorized should have access to OS on your system</b>
    If this is valid you do not need to solve problems who can and who cannot start/stop SAP, because if you want to prevent some users from shutting down the SAP you have really hard job to do - there are many ways how to kill the SAP (for example killing relevant process from task manager, killing of database, messing with services etc.) - yes, this is harmful way of stopping SAP, but we are talking about attack, right? I would contact some Windows specialist to help you disable all the ways how to harm the running SAP. But still after that - there are many files that can be modified/deleted so SAP will crash after restart - you need to protect them too, etc.
    In case you take the first assumption as granted (and you really limit access to this server) you do not need to worry who can stop or start SAP - at the other hand it may be handy to be able to start/stop SAP from other users - for this you can run the stop/start script "under different user".
    But to answer the question - to me this is question just of access control (but really never tried that myself):
    <a href="http://technet2.microsoft.com/WindowsServer/en/library/c6413717-511e-42bd-bd81-82431afe4b2a1033.mspx">Permit or restrict access to a snap-in for a domain</a> (or see other related links down there on this page)
    Please award points for useful answers.
    Thanks

  • Error while creating the dictionary in netweaver

    Dear sirs,
    I am taking part in the process of migrating a J2ee application from JBoss to SAP Server. I have imported the ejb project.
    I have an entity bean with 79 CMP fields. i have created the bean and created the table for the same also in the dictionary. But when i tried to build the dictionary, i am getting an error message as given below,
    "Dictionary Generation: DB2:checkNumberOfColumns (primary key of table IMP_MANDANT): number of columns (79) greater than allowed maximum (64) IMP_MANDANT.dtdbtable MyAtlasDictionary/src/packages"
    Is it mean that we can not create tables with fields more than 64 in the dictionary?
    I was able to create the table in the DB directly with more than 79 fields.
    So i hope it is because of some settings in the Dictionary.
    Do you know whethr any options are avilable in the netweaver developer studio to change the default column limit of the table
    Kindly help,
    Thankyou,
    Sudheesh...

    Hi Sudheesh,
    If u want to Display database default values as a column in the table editor:
    choose window>preferences>dictionary>Table Editor>check it for default valus that is being used in the DB.
    Just try this.
    Also check on to this link u will find lots of stuffus regarding this issue.
    http://help.sap.com/saphelp_erp2005/helpdata/en/83/4d152a31b09842986cdac2cff10aa4/frameset.htm
    Regards,
    Nagarajan.
    Message was edited by: Nagarajan Kumarappan

  • Unable to read the dictionary of the application or extension...

    I had previously installed the HP Color LaserJet 3600 driver from the install CD under Tiger. I recently did an archive and install of Leopard, then ran all the system updates. (Currently at 10.5.5)
    When I insert the 3600 CD, though, I get a bunch of jibberish (parts of images, etc.) and a MAC OS X directory. The installer inside that directory attempts to be opened with Script Editor, though, and gives an error: "Unable to read the dictionary of the application or extension because it is not scriptable." followed by "The document 'HP Color LaserJet v5.6.1.069' could not be opened."
    Previously this would launch the HP installation program that would install the driver. Now, it's like it's not a recognized program or something. I downloaded the driver from the HP website to try it that way (clj3600MacOSX.dmg) with the same result. The .dmg file opens a disk image with the "HP Color LaserJet v.5.6.1.069" file in it...same result. Cannot open.
    I know this program ran fine under Tiger...and a co-worker got it to run after doing an upgrade to Leopard (instead of archive and install.)
    When I downloaded the HP 4300 installer dmg, it launches a .mpkg file and Get Info says it's set to open with "Installer (default)". The 3600 file, though is set to open with "Script Editor (default)". I've looked to set it to Installer, but don't know where it is...it's not in Applications or Utilities folder.
    I then right clicked on the installer file and selected "Show Package Contents". In the window that was displayed, there was a Contents folder. Inside that folder was a file called "HP Color LaserJet v5.6" with no file extension (Get Info doesn't show an extension either,) but it has a VISE logo. Opening that file launches the VISE installer and performs the setup.
    So, by jumping through hoops and getting lucky, I was able to install the driver.
    The bigger issue, though, is why the installation CD and/or .dmg file downloaded from HP's website cannot run the installer as usual...why are they set to open with Script Editor as the default application...and how can I fix it so that other disks won't have the same problem?
    [I originally posted this in the Printers forum, but it appears it's not a printing problem...it's an OS problem...]

    Installer.app is in /System/Library/CoreServices/

  • How can I change the language of the dictionary in iPhone's Safari?

    Hello,
    I'm from Germany but I use my iPhone 5 in English. Yesterday I was using Safari on the iPhone and wanted to check a word I wasn't familiar with. So I highlighted it, touched "define" - and was surprised to see that I was asked if I wanted to download a dictionary. Okay, so I did. The problem is: It's downloaded the German version. So I can't look-up English words because the dictionary wouldn't recognize them.
    My questions are:
    1.) Why does the dictionary use a German base when my iPhone runs completely English?
    2.) Is there a way to change that? I haven't found an option to do so in the Settings.
    The strange thing is that with the iPhone 4 I've had before this was never an issue: The Phone used English and so did the dictionary.
    Thank you in advance
    Paul

    you're not gonna solve that with the language settings ... could be that the dictionary loads the setup language by default, but well here are some simple steps to follow:
    1 highlight any word in a text (Safari, Notes anything you want)
    2 tap on "define"
    3 now in the dictionary panel, tap manage, and add/remove the language or languages that you need. They will be downloaded or removed as needed.
    you're done.
    ps: reading now that you can't find the "define" option ... then no idea, something went wrong with your setup.

  • Is there a way to set up FF so that you can install a new dictionary and use it in addition to the dictionary you are already using?

    I have managed to create a dictionary which contains a list of common chemical names and terms. But to use it you have to select the dictionary as a replacement for your normal language. As the chemical names are used in sentances constructed in a users normal language this is not ideal. Is there a way to install the new dictionary to work in an additive way to your existing dictionary?

    > Message to your friend: I though you would find this
    interesting.. blah
    > blah.... www.linktomysite.com
    What you are looking for is a "send a friend a link" script.
    http://www.hotscripts.com/PHP/Scripts_and_Programs/Site_Recommendation/index
    .html
    use the menu to find the flavor of scripting you can use.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Is there a way to remove one or more words in the dictionary list of auto-completion?

    Is there a way to remove one or more words from the dictionary list of auto-completion?

    Hi Gordon,
    Auto-completion does not involve the dictionary. The process is dynamic, and remembers the text string you have entered into each cell. The auto completion list is constructed using data you have entered into cells above the one you are currently working with. Suggestions presented contain the same character string as a previous entry in that column. Editing the list presented is not possible.
    Auto-Correction does involve the spelling dictionary. It monitors the text as you type. If it finds an 'unregognized word,"' AND has more than one suggestion as to the 'correct' word, it opens a dialogue, giving you a chance to choose one of the suggestions, enter your own corection, or to accept the current spelling. If there is only one suggestion offered, Auto-correction automatically replaces the unrecognized word wth that suggestion.
    Regards,
    Barry

  • How can i turn off the dictionary in my iphone? any help pls.?, how can i turn off the dictionary in my iphone? any help pls.?

    i have problem in typing messages, im slow because the words is keep on changing so maybe the dictionary in my iphone is on, I cant find the option where i can turn off. please help me. thank you so much.

    Settings>General>Keyboard>Auto-Correction
    Turn it off.

Maybe you are looking for