Finding Gaps within an individual Track

Hi
Is it possible to find gaps in Video Track one if there is a continuous audio track below it?
I have tried selecting the header of video 1 along with selecting the whole track. Then deselecting all other headers.
When i use sequence/ go to gap it doesn't.
Thanks
Gary

Not a problem
Note that, by default, these commands don't have keyboard shortcuts. If you're into that sort of thing, open up Edit > Keyboard Customization, and you can set shortcuts for these in Application > Sequence > Go to Gap.

Similar Messages

Gaps within itune album tracks when played on ipod

I seem to get the between track break a few seconds into each new track on an album downloaded from itunes - so will crossfade from last to next track without a break then a few seconds into the new track a 1 second silence then continues. Same album plays fine in itunes. Imported CD's play fine both in itunes and on he ipod. Have tried a mixture of crossfade settings without effect. Any clues?
Dell 8600 Windows XP

Thx Gary, tried your suggestion - now have 1 file, alas still with a 1 second break a few seconds into each new track.
Hello krikit,
Welcome to Apple Discussions.
Unfortunately, the songs you download from ITMS will
always have gaps, because they are also sold
individually. Playing in iTunes, you probably don't
notice the gaps, but it is more noticeable so in the
iPod, because the iPod has to load the song into
memory cache before playing.
One thing you can try is select those songs and burn
a CD. Then, when importing back into iTunes, select
all the songs on the CD and, in the Advanced menu,
select Join CD Tracks.
Gary
Dell 8600 Windows XP

How can I change the tempo and pitch of individual tracks on Garageband 10.0.3?

I just recently started using Garageband 10.0.3 and it's been updated completely, which is good in some ways. However, many things have been cleaned up and/or hidden and it's taken me a while to find certain tools or do certain things.
I've been trying to change the pitch of tracks in my project and it's taken me forever to find out how, but eventually I did. I think, though, that it changes the pitch of the whole project? (I changed the pitch by using one of the plugins, I think it's called AUPitch?) I have to double-check that, but that's how I've been changing the pitch of the tracks.
To the bigger problem... Tempo. I have searched for a good 2 hours trying to find out how to change the tempo of tracks individually and I'm really frustrated. I tried the BPM solution (changing the BPM at the very top), but that seems to change the whole project. I just want to change the tempo of individual tracks, not the whole thing. Is it even possible now?
I'm really considering using a different program. Hopefully this is just me being slightly clueless and not Garageband's fault.

The AuPitch filter will work on individual tracks, no problem.
But you can change the tempo only for the entire project with the global tempo setting or the Tempo Track.
As a work-around: To change the tempo of individual tracks solo each track, change the tempo, then bounce the track as an audio file and reimport that audio file with the changed tempo to an audio track.

Burning mixed 5.1 songs to DVD-A as individual tracks?

Hi All,
A noob around these parts and to Logic Pro 9 so please be gentle
After a fair bit of looking online I can't find the answer to my particular problem, which is...
I have recorded & mixed a jazz band in 5.1 on Logic Pro 9.
I have bounced the whole session as a 5.1 DVD-A disc with no problems but I want to be able to have each song as an individual track, not one long track with no breaks.
Is this possible to do in Logic 9 Pro or do I need another 3rd party bit of software?
Any help much appreciated,
Jon

Hi, noisyjon.
Can you select each track as a separate region and use save as to write them as in dividual tracks. Another way is to use the locators ans select how much of the full track [the entire dvd] you want to bounce and save that file.
ie. say track 1 is from bar 0 to bar 71. select that in your bounce menu and logic will only bounce that portion of the project. You can also name it whatever you want in the bounce drop box. Repeat for each track.
Hoe this helps,
Regards,
Scorpii.

HT204406 on ios 6.0 iphone4: Now the device was lost to download individual tracks selectively and completely lost the ability to delete individual tracks and albums from the device. its so BAD (((

on ios 6.0 iphone4:
Now the device was lost to download individual tracks selectively and completely lost the ability to delete individual tracks and albums from the device.
its so BAD (((

It seems that I have solved my issue by performing a full factory reset (erasing all content, something which I had hoped to avoid) restoring from an iCloud backup did not alleviate the issue, I had to set up as a new iPad.
Hopefully anyone else else who has this issue in the future will be able to find this.

Adding or Deleting individual Tracks/Songs from iPod Nano-How to?

I want to find out how to load individual tracks (instead of entire folders or artists) from the library to my ipod nano. If that is not possible, then can I at least get help deleting individual tracks from my song list on my ipod nano??? When I have the songlist up and right click, nothing but play, rating, or get info information pops up. In the editing window above the delete option is faded out. I want to get all the songs I like to listen to, not all or nothing. Please help....

VyteSnake,
Are you manually manging your music? In other words, do you have the Manually manage music and videos option ticked from under your iPod's Summary tab? I only ask because it sounds like you are trying to manually remove tracks from your iPod.
Another option is to set your iPod up to sync only checked songs and movies by enabling this option from under the Summary tab. Then make sure each track you wish to sync to your iPod has a tick mark next to it in your main iTunes library. If you don't want it synced over, remove the tick mark.
For more help on syncing and removing music, see this document.
http://support.apple.com/kb/ht1351
B-rock

Creating a 'Play All' button which will play individual tracks

I've created a DVD with a main menu with connections to three sub menus which each have several separate tracks, each with their own individual buttons. The tracks do not have chapters. I would like to make a 'play all' button on each sub menu, so that all the tracks play one after another. I have tried it in a 'story' but found I can't link separate tracks--that seems to only be for linking chapters within the same track.
I am already at 4.6 GB on a DVD 5 so I was hoping not to have to recreate another track with all of the movies in one... then I think I would have to jump up to a DVD 9. ... or...? Anyone have any info?

The easiest way to do this is as Eric said - create one track and put ALL your clips into it, delete the other tracks. You'll need to set chapter markers up, and use stories to play the different sections on their own, but you can then make a simple play all scenario.
If you really don't want to do that, you'll need to script this. The model to have in your head is that when you use the 'play all' button you set 'flag'. The first track plays and at the end the jump goes to a short script that looks to see if the 'flag' is in place - if it is you jump to the next track. If not, you go back to the menu. This continues for every track you need to include - each end jump goes to a short script which looks for the 'flag'.
the 'flag' is simply a value that you put into a memory slot. You have got 8 memory slots to play with, called 'GPRMs' (General Parameter Register Memory). They are sometimes called variables.
As with almost everything else in DVDSP, there are several ways to create this scripted solution. One way is here:
http://www.dvdstudiopro.co.uk/tutorials/play-all-1/
It has a set of sample files to download and explore. The thing to remember is that the sample layouts are not intended to be used for a real project, only prove the concept. A couple of additional things need to be done to make them suitable for full production.
If you are comfortable with scripting in general, a slightly more complex solution is here:
http://www.dvdstudiopro.co.uk/tutorials/play-all-3/
This last one uses just three scripts, and makes use of the internal numbering system to identify which track and menu you were just on, or going back to. Three scripts is simple, but the detail of the scripts is a little more complex! Once again, these are just examples and in order to use this particular sample layout a couple of other things need to be added to ensure it will work in a production disc. All very simple to do, of course.

MIDI files-Turning individual tracks on/off

How would one turn off individual MIDI tracks? Quicktime Pro is a handy, quick app. Is there an editing screen for the individual tracks? Quicktime seems to be General MIDI oriented and is still useful in certain cases. -Stefan

What I'm really looking for is a quick, simple way to edit MIDI files that use the General MIDI soundset and conventions. Quicktime plays them back with a fairly good sound overall but with no editing flexibility. I can use Garageband for the quick and dirty, but often things aren't as simple as in Quicktime because of anomalies like the bass tracks playing back an octave too low, or an odd playback synth patch choice made by Garageband (and then I have to monkey around with the file). I use Logic and Digital Performer almost daily, but I want something quicker and simpler. I find it hard to believe there isn't a mode to import to Garageband or Logic that maintains the General MIDI conventions. Usually, all that's needed is to turn off a track or two and reduce reverb to make the track nominally acceptable. (Obviously, this seems like the perfect job for something like Quicktime Pro. Oh well...)

Creating individual tracks from vinyl

I have just digitized an album. Each side is an aiff file that I split into individual tracks in Garageband. Now, I need to send the files to iTunes. Each time I try this, I'm getting one big 25 minute track instead of four individuals. Someone give me some help please.

Good Dog Fluffy wrote:
I'm getting one big 25 minute track instead of four individuals.
either burn it to CD from within GB:
http://www.bulletsandbones.com/GB/GBFAQ.html#chaptertocdtracks
(Let the page FULLY load. The link to your answer is at the top of your screen)
or export each song seperately:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportsections
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to show individual track information (like in the old iTunes) of a single artist (or that artist's album) without all the noise of every single other artist close in the alphabet?

The new iTunes has truly added extra visual noise.
I am trying to view a single Artist and the individual track information of that artist. This used to be how itunes was, you could click on a single artist and then the tracks would all have their various categories.
I can still see this but only in the "songs" category and in that I have to see every single song or artist alphabetically.
How do I simply see the artist, and that artist's tracks, as well as the different info about that track I want to see, such as "name, track #, time, year, genre, bit rate, kind, etc."
Please don't counsel me on what information I need to see, or suggest that I stop caring about this, or ask me why I want to see this various info.
It was simple and accessible in the older version and I would probably stop complaining to all of my friends about the latest version of itunes if I can see this old format.
Or... is there a way to re-download the old version? It's okay that you've made mistakes, every company makes mistakes, if I can revert to the old version that would be great.
Thank you.

Select the Songs tab, then under iTunes Menu select View then click Show Column Browser. You will see the familiar GENRES ARTISTS ALBUMS header, click on one artist and you will have only the artist's albums and songs showing in the window below with all the specific info you selected under View options. If this is not what you wanted, simply reply with a nice "no thanks".
Search this forum for instructions to reinstall iTunes 10.7, there are quite a few posts explaining the process.

I am trying to find an app that will track the usage on my iphone with times and dates to see what was accessed on my phone when I was away from it and what if anything was done eg deleted messages viewed facebook etc?

Hi! I am trying to find an app that with track everything that is done on my phone with times and dates? im not really woried about call usage and texts sent I need it to view what has been done - for example:
Messages received
Messages deleted
Facebook viewed
Messages viewed
Internet viewed and what?
I just have an issue with someone using my phone - I used to track this through double clicking the home button and roughly knowing in what order I had been on things but they have sussed this one!
Thank you!!

No way to do that on a non-jailbroken iPhone. Why don't you just passcode protect your phone? That way no one but you can use it...unless they know your passcode.

Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

Recently got a new iphone but when i tried to sync it with my itunes, all my music appeared with a cloud beside it and doesnt play. Do i have to download each individual track by clicking on each cloud or is there an easier way? I have over 1000 songs!!!!

Hi. The two user tips both describe a sequence of steps that should get your library from the point where it threatens to wipe data from your device to where it is syncing normally, while recovering as much information as possible. It may still be necessary to wipe and reload the device but this should only take place once all the data that can be recovered has been recovered.
Doing step 1 of 8 and then complaining things aren't the way you want them to be yet strikes me as premature...
Since you appear to have all your media content, and we are discussing an iPod classic, not an iOS device, the main worries are already taken care of. What's left is ratings, playcounts, playlist membership and checked status. Since your device holds only part of your library at best you could only recover the missing data for the content that is on the device using third party tools.
Recreating the previous checked/unchecked status of every track in your library from where you are now may not be that easy. Syncing with selected playlists has many advantages, one of which would have been that you would have a named playlist that could have been retrieved by 3rd party software if you had used this method.
You haven't explained what caused your problem in the first place, but if you have a Previous iTunes Libraries folder holding old copies of your iTunes database (generated with each iTunes update) then it would be possible to restore the most recent of these and then update the library with any changes in your media folder.
BTW Apple doesn't offer free support for this kind of issue with iTunes.
tt2

Drag-n-Drop not working (Finder and within apps)

while using machine, after about 15 minutes or so, Drag-n-Drop stops working....in Finder and within all apps. Cant' move files within Finder; can't highlight text and move it within an app, can't D-n-D photos; nothing
it takes either a system restart, or logout of user, then log back in as user and D-n-D is restored.
But, it works for about 15 minutes or so, again...then stops functioning.
Happens repeatedly, doesn't matter what apps I'm using, or even using any apps at all...just power up machine....move a few files...let it sit for a while and do nothing, and then D-n-D stops working again.
This is very annoying...and makes Leopard almost useless, since I can't manipulate anything with the mouse.
HHHHEEELLLPPP!!!!!!

I am having the same problem. Even restarting does not work, i am using a jail iphone 3gs, not sure if thats got anything to do with it?
Anyone help, the only way i can get albums etc to add is to sync and that messing all kinds up.

HT1473 I purchased a cd and downloaded to my itune library, but I can not see it as an ALBUM, only individual track?

I purchased a CD and downloaded all the 16 songs in Itune Library? When I went to my Itune to open the album of 16 songs, instead I saw 16 individual track with no name or title? I don't want to see individual track, I want to see as an album. Can any one help?
Thanks
Mark Moradoff
email:[email protected]

Not sure what would cause that. Try deleting all the songs and re downloading them.
From iTunes Store go to Purchased in Quick Links on the right.

Cover Flow w/ Individual Tracks

I have a number of singles in my library with no album info listed. When I view in grid or cover flow, each individual track shows up with the generic iTunes icon as cover art.
Is there a way to either:
a) consolidate all the singles for each artist so that they only show up once in grid or cover flow views, and/or
b) select if you want certain tracks/albums to be hidden in grid or cover flow views?

Some albums may not be what would normally be called a compilation album (e.g. Now That's What I Call Music Vol X is a compilation album), but might have tracks with differing artists. The classic example is Queen's Greatest Hits III.
Microsoft of all people came up with a good idea on how to cope with this which is an additional meta tag called "Album Artist" which is different to the individual track artist. Using the same Queen's Great Hits III album example, the entire album would by any sensible person be considered to be a Queen album but track 2 (Under Pressure) of that album is jointly by Queen & David Bowie (not just Queen).
I (and I presume others) requested Apple add support for this Album Artist tag and it was indeed added in iTunes 7.0. Unfortunately in my opinion, Apple's implementation is not as good as Microsoft's.
Apple in iTunes do not let you browse by Album Artist at all, nor do they let you properly sort by Album Artist (in my opinion this sorting is broken).
I direct you to this other older message thread http://discussions.apple.com/thread.jspa?threadID=843028&start=15&tstart=0 in which you can see a screen capture by myself listing just two albums - Queen's Greatest Hits II, and Queen's Greatest Hits III. Despite the fact that I have filled in all the tracks to all have the identical Album Artist entry (of Queen), you can see Coverflow incorrectly breaks it in to two copies of Queen's Greatest Hits II, and three copies of Greatest Hits III.
The only way I have found to get iTunes to correctly group all the tracks of an album together is to use any of the three sorting by Album name options (all accessed by clicking on the column heading called Album).
Note: Microsoft do let you browse and sort properly by the Album Artist tag in Windows Media Player.
[I suppose Microsoft have to get something right eventually!]

Finding Gaps within an individual Track

Similar Messages

Maybe you are looking for