Finding Hard coded Text in ABAP program

Gurus,
Is there any method to find out Hard coded TEXT in an abap Program? For Example
write:/ TEXT-T01,
'Hello World',TEXT-T02.
In which i need to find out Hello world which is inside ''. I am not able to find with Search command.
Can you Please guide me,
Regards,
Lijo Joseph
Message was edited by: Lijo Joseph vazhappilly

try this.
data: report_pg type SY-REPID ,
rpt_source type standard table of D022S .
REFRESH rpt_source .
move: <rpt name> to report_pg .
READ REPORT report_pg INTO rpt_source .
now do a search/find in rpt_source.
Regards
Raja

Similar Messages

Hard coded text in SAP include

Hi,
I am using Logical database in my program(PNP). in that there is one hard coded text. which is caught in extended program check as an error. can we fix this? without having access key?
that hard coded text present in standard include.

Why fix it? The enhanced program checker isn't perfect. The "error" is harmless.
matt

Note 1572302 - Hard-coded credentials in ABAP DDIC

Hello,
Have you read [Note 1572302 - Hard-coded credentials in ABAP DDIC|https://service.sap.com/sap/support/notes/1572302] ?
I had a good laugh when I read it. Before implementing the note or the corresponding SP, you'd better check the usernames in your production system !
I know 14 SAP employees that must have get some good congratulations !
I am also a little afraid by the lack of source code reviewing before distribution to customers....
Regards,
Olivier

Julius Bussche wrote:
From my experiences SAP are also very responsive to reporting such issues, though 1st level support on SMP might initially tell you that the solution is not to use it...
Well, if you have found a security issue and face difficulties to address it properly, kindly do not hesitate to [report it via mail (PGP encrypted) to SAP|/docs/DOC-8218#section36 [original link is broken]].

How can i find item category usage in abap program

HI, EXPERTS
I HEARD USAGE MAINTAINED IN ABAP PROGRAM .
ANY ONE KNOW WHERE I CAN FIND ABAP PROGRAM FOR ITEM CATEGORY USAGE??
THANKS.^
Edited by: jong seok Lee on Feb 2, 2010 10:01 AM

Hi,
Item Category Usage: An item categories usage is defined by SAP when creating a sales order, The system determines for example, that the usage refers to a text item as oppossed to a deliverable item when you enter text in the order item rather than a material number. Based on this usage, the system will use the item category determination to propose an item category.
You can also find the usage in Custoemer material info record (T.Code VD51), if you want to determine any customer specific item category you may use the usage field in Custoemr master info record.
You can devlop an user exit to determine the item category based upon usage field as well.
regrads
Vivek.

Finding User Exists in an ABAP program

**How to findout where there is an exit are there in the ABAP Programs.
Thankyou for your time in giving the answers.
Bhaskar.

use cmod /smod transaction..
below is demo code to find BADI n user exits for a transaction ( u can go to se93 and create a transaction for ur report program) and then execute this piece of code -
reward if helpfull
TABLES : TSTC,
TADIR,
MODSAPT,
MODACT,
TRDIR,
TFDIR,
ENLFDIR,
SXS_ATTRT ,
TSTCT.
DATA : JTAB LIKE TADIR OCCURS 0 WITH HEADER LINE.
DATA : FIELD1(30).
DATA : V_DEVCLASS LIKE TADIR-DEVCLASS.
PARAMETERS : P_TCODE LIKE TSTC-TCODE,
P_PGMNA LIKE TSTC-PGMNA .
DATA wa_tadir type tadir.
START-OF-SELECTION.
IF NOT P_TCODE IS INITIAL.
SELECT SINGLE * FROM TSTC WHERE TCODE EQ P_TCODE.
ELSEIF NOT P_PGMNA IS INITIAL.
TSTC-PGMNA = P_PGMNA.
ENDIF.
IF SY-SUBRC EQ 0.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'PROG'
AND OBJ_NAME = TSTC-PGMNA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
IF SY-SUBRC NE 0.
SELECT SINGLE * FROM TRDIR
WHERE NAME = TSTC-PGMNA.
IF TRDIR-SUBC EQ 'F'.
SELECT SINGLE * FROM TFDIR
WHERE PNAME = TSTC-PGMNA.
SELECT SINGLE * FROM ENLFDIR
WHERE FUNCNAME = TFDIR-FUNCNAME.
SELECT SINGLE * FROM TADIR
WHERE PGMID = 'R3TR'
AND OBJECT = 'FUGR'
AND OBJ_NAME EQ ENLFDIR-AREA.
MOVE : TADIR-DEVCLASS TO V_DEVCLASS.
ENDIF.
ENDIF.
SELECT * FROM TADIR INTO TABLE JTAB
WHERE PGMID = 'R3TR'
AND OBJECT in ('SMOD', 'SXSD')
AND DEVCLASS = V_DEVCLASS.
SELECT SINGLE * FROM TSTCT
WHERE SPRSL EQ SY-LANGU
AND TCODE EQ P_TCODE.
FORMAT COLOR COL_POSITIVE INTENSIFIED OFF.
WRITE:/(19) 'Transaction Code - ',
20(20) P_TCODE,
45(50) TSTCT-TTEXT.
SKIP.
IF NOT JTAB[] IS INITIAL.
WRITE:/(105) SY-ULINE.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
Sorting the internal Table
sort jtab by OBJECT.
data : wf_txt(60) type c,
wf_smod type i ,
wf_badi type i ,
wf_object2(30) type C.
clear : wf_smod, wf_badi , wf_object2.
Get the total SMOD.
LOOP AT JTAB into wa_tadir.
at first.
FORMAT COLOR COL_HEADING INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 'Enhancement/ Business Add-in',
41 SY-VLINE ,
42 'Description',
105 SY-VLINE.
WRITE:/(105) SY-ULINE.
endat.
clear wf_txt.
at new object.
if wa_tadir-object = 'SMOD'.
wf_object2 = 'Enhancement' .
elseif wa_tadir-object = 'SXSD'.
wf_object2 = ' Business Add-in'.
endif.
FORMAT COLOR COL_GROUP INTENSIFIED ON.
WRITE:/1 SY-VLINE,
2 wf_object2,
105 SY-VLINE.
endat.
case wa_tadir-object.
when 'SMOD'.
wf_smod = wf_smod + 1.
SELECT SINGLE MODTEXT into wf_txt
FROM MODSAPT
WHERE SPRSL = SY-LANGU
AND NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED OFF.
when 'SXSD'.
For BADis
wf_badi = wf_badi + 1 .
select single TEXT into wf_txt
from SXS_ATTRT
where sprsl = sy-langu
and EXIT_NAME = wa_tadir-OBJ_NAME.
FORMAT COLOR COL_NORMAL INTENSIFIED ON.
endcase.
WRITE:/1 SY-VLINE,
2 wa_tadir-OBJ_NAME hotspot on,
41 SY-VLINE ,
42 wf_txt,
105 SY-VLINE.
AT END OF object.
write : /(105) sy-ULINE.
ENDAT.
ENDLOOP.
WRITE:/(105) SY-ULINE.
SKIP.
FORMAT COLOR COL_TOTAL INTENSIFIED ON.
WRITE:/ 'No.of Exits:' , wf_smod.
WRITE:/ 'No.of BADis:' , wf_badi.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'No userexits or BADis exist'.
ENDIF.
ELSE.
FORMAT COLOR COL_NEGATIVE INTENSIFIED ON.
WRITE:/(105) 'Transaction does not exist'.
ENDIF.
AT LINE-SELECTION.
data : wf_object type tadir-object.
clear wf_object.
GET CURSOR FIELD FIELD1.
CHECK FIELD1(8) EQ 'WA_TADIR'.
read table jtab with key obj_name = sy-lisel+1(20).
move jtab-object to wf_object.
case wf_object.
when 'SMOD'.
SET PARAMETER ID 'MON' FIELD SY-LISEL+1(10).
CALL TRANSACTION 'SMOD' AND SKIP FIRST SCREEN.
when 'SXSD'.
SET PARAMETER ID 'EXN' FIELD SY-LISEL+1(20).
CALL TRANSACTION 'SE1 ' AND SKIP FIRST SCREEN.
endcase.

Need to find SAP query for corresponding ABAP program.

Hello SAP Experts,
I have an ABAP program "AQDESYSTQV000001ORDERDETAILS==" in ECC 4.7. We had a client copy recently from ECC 4.7 to ECC 6.0. Now in ECC 6.0 I am unable to find this program in SE38.
Can you please tell me how to create this program in ECC 6.0 ? Also, by the name of this program it is clearly seen that this program is automatically created by using SAP query.
I tried to generate the program using SQ01, but system asks me for the SAP query.
Can you please tell me how to find the SAP Query for the corresponding abap program ? Also, the steps as in how to generate the program in ECC 6.0.
Thanks.

Hi Danish,
In the program name, the query name is always attached.
For example : The program name is , AQ10SD==========Z10SD_INVPRODL=
Here the query name is Z10SD_INVPRODL and if you go to transaction SQ01 and enter the query name
then you can find the infoset.
And also you can gernate the program with the help of query name.
Please try the same and let me know if any details are required.
Regards,
Darshana

Displaying Russian commented text in ABAP program

Hi Experts,
I have one program in which comments are in Russian and in one system those commented text is being displayed in Russian after after choosing Cyrillic from Character set of Customizing of local layout option while in an other system same commented texts are displayed as junk characters even after choosing Cyrillic from Character set of Customizing of local layout option.
Example :
In 1st system, russian commented text is displayed correctly as follow
DATA: YEAR_AFABG(4) TYPE N. " Год даты начала амортизации
while in 2nd system in which code comes from the 1st sytem, russian commented text is not displayed in russian and displayed as junk characters as follows -
DATA: YEAR_AFABG(4) TYPE N. " Ãîä äàòû íà÷àëà àìîðòèçàöèè
Can anybody help me on these ? Any help would be highly appreciated.
Thanks in advance,
Akash

try this.
data: report_pg type SY-REPID ,
rpt_source type standard table of D022S .
REFRESH rpt_source .
move: <rpt name> to report_pg .
READ REPORT report_pg INTO rpt_source .
now do a search/find in rpt_source.
Regards
Raja

Find dictionary object used in ABAP program

Dear All,
Pl help me find out all the dictionary objects used in report program and dialog program.
Input will be program name(report or module pool). output will give name of the database tables used in that program.
thanks.

Hi,
Use the FM RS_PROGRAM_TABLES
pass the object type as PROG for report and the program name for object name
Vikranth

How to find out the hard coded Z program in my server

Hi,
I have more than 5000 program in the server in that i need to find out how many programs being hardcoded by developer . If hardcoded what feild they hardcoded Like BUKRS , WERKS like that.
Is there any standard program to find out ? Please let me know.
Thanks !
Regards,
Nallu

So many Utilities are there in SAP to find it out a particular string.
Experiment all and choose more appropriate one for your requirement.
Program Name : RPR_ABAP_SOURCE_SCAN - Search for a particular string
Program Name : AFX_CODE_SCANNER - Scans Report/Funct. Group/Class Code
Transcation code : EWK1 - Cust.Development: Curr.in Report Txt
Program Name : RKCTSEAR - String search in Programs
Program Name : RSRSCAN1 - Find a String in a ABAP program
Even you can use code inspector also

Abap program standards

hi all,
     i need to design flow chart for checking for a program whether it satifies the abap coding standards or not. who to do it. if possible send me graphical representations [flow charts] or links to find programming standards.
some of my requirements in that folw chart are
1. how to recognize a blank space in a given program,
2. how to recognize a comment,
3. how to check wheteher a keyword is used or not,
4. how to identify the ' :' symbol
thanks & regards,
suresh babu aluri.

plz go through this documementaion,
i think its helpful.
ABAP Programming StandardsContents
1.     Objective     5
2.     Naming Conventions     5
2.1     Codes for naming conventions     5
2.1.1     Module Codes     5
2.1.2     Free text     6
2.2     Naming Convention of Development Objects     6
2.2.1     Package     6
2.2.2     Executable Program     6
2.2.3     BSP Application     7
2.2.4     Logical Database     8
2.2.5     SAP Scripts /Smartforms     9
2.2.6     Idocs     9
2.2.7     Transaction Code     10
2.2.8     Function Groups     10
2.2.9     Dictionary Objects     11
2.2.10     Message Class     11
2.2.11     Enhancement Projects (User Exits)     11
2.2.12     LSMW Objects     12
2.2.13     Classes     12
2.2.14     BOR Object Types     13
2.2.15     Screen / Transaction Variants     13
2.2.16     Area Menu     13
2.3     Naming of Sub-Objects     13
2.3.1     Program Sub-Objects     13
2.3.2     SAP Script /Smartform sub-objects     14
3.     General Programming Guidelines     14
3.1     Modification Logs     14
3.2     Program Organization     15
3.2.1     Executable Programs     15
3.2.2     Dialog Programs     15
3.3     Package     15
3.3.1     Adding Components to existing objects     15
3.3.2     Creation of New Objects     15
3.4     Program Messages     15
3.4.1     Adding Messages to existing landscapes     15
3.4.2     Creation of New Objects     16
3.5     Dictionary Objects     16
4.     Structure of ABAP Programs     16
4.1     Type     16
4.2     Status     18
4.3     Authority Check     18
4.4     Program Structure     19
4.4.1     Declaration data for global data, classes and selection screens     19
4.4.2     Container for Processing Blocks     19
4.4.3     Calling Processing Blocks     20
4.5     Screen Flow Logic (Dialog Programs)     20
4.5.1     Place the AT EXIT COMMAND at the beginning of the flow logic.     20
4.5.2     Use FIELD and CHAIN statements to keep fields in error open for correction.     20
4.6     Main Program     20
4.6.1     Events     20
5.     General Coding Standards     21
5.1     One command per line     21
5.2     Indented Source Code     21
5.3     Extended Syntax Check     21
5.4     Reusability and Modularity     21
5.5     Text Handling     21
5.6     Usage of System Variables     22
5.7     Chaining Statements     22
5.8     Common Routines     22
5.9     Dialog Messages     22
5.10     Function Keys     23
5.11     Enqueuing and Dequeuing Data Objects     23
5.12     Error Handling (SY-SUBRC)     23
5.13     General Conventions and Hints     24
5.14     Parameters in Sub-Routines     24
6.     Performance Standards     25
6.1     General Tips on Performance Tuning     25
6.1.1     Avoid Redundant code     25
6.1.2     Subroutine Usage     25
6.1.3     Case vs. Nested IF     25
6.1.4     Using the MOVE Statement     25
6.1.5     SELECT Queries     25
6.1.6     Using the READ statement     27
6.1.7     Hashed table     27
6.1.8     Transporting     28
6.1.9     Using LDB     28
6.1.10     Append Lines of     28
6.1.11     Use WHILE     28
6.1.12     DELETE <itab> WHERE     28
6.1.13     Using WHERE clause in LOOP.ENDLOOP     28
1.     Objective
The objective of this document is to describe general programming guidelines, methodologies, Naming conventions and performance guidelines for all the programs developed for SAP Project.
2.     Naming Conventions
This chapter describes the naming conventions to be followed for naming the programming objects for SAP project.
2.1      Codes for naming conventions
The variable portion of naming convention is given with Code ID given in angle brackets(<>). Use the following tables for replacing code IDs with codes in the object naming.
2.1.1     Module Codes
Code ID: mm
Code     Description
FI     Finance
CO     Controlling Module
MM     Materials Management
PP      Production Planning
SD     Sales & Distribution
QM      Quality Management
PM     Plant Maintenance
IM     Inventory Management
WM     Warehouse Management
BC     Basis Module
BW     Business Warehouse
WF     Workflows (Master Data Management)
HR     Human Resources
EBP     EBP
PS     Project Systems
PCP     Synpro: Product Costing
PAP     Synpro: COPA
DP     APO : Demand Planning
SP     APO : Supply Network Planning
DS      APO : Production Planning & Detailed Scheduling
AT     APO : Global ATP
TP     APO : Transportation Planning/Vehicle Scheduling
CI     Core Interface
LC     Live Cache
2.1.2     Free text
Code ID: ffff
Developer should replace ffff with meaningful text. The text can be multiple words separated by underscore.
2.2     Naming Convention of Development Objects
2.2.1     Package
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with Module codes given in section 2.1.1 above.
2.     Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3.     The maximum permissible length for development class is 30 characters
Examples:
Dev. Class     Description
ZFI_AR     FI: Account Receivables
ZCO_CCA     CO: Cost Center Accounting
2.2.2     Executable Program
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text as illustrated in examples below.
3.     The maximum permissible length for program name is 30 characters. However, the name should be restricted to 25 characters to accommodate appropriate Include naming as described in 2.2.2.
Examples:
Program Name     Description
ZFI_VAT_RET     FI: Report for VAT Return
ZMM_AUTO_GR     MM: Automated Goods Receipt
ZSD_XX_STCK_SHORTAGE     SD: Stock shortage report for stock allocation
2.2.2.1     Includes for executable programs
Naming Convention: Z<mm>_<ffff>_<Inn>.
Notes:
1.     All includes of executable program will be prefixed by Z, followed by the same program name as described in 2.2.2 above.
2.     Replace <Inn> with include type and sequence number. Use the following table for includes.
Include Type ID     Description
TOP     Top Include.
Fnn     Subroutine pool (Forms)
Inn     PAI Modules
Onn     PBO Modules
Xnn     Other Includes
The maximum permissible length for Include name is 30 characters.
Examples:
Include Name     Main Program Name     Description
ZFI_VAT_RET_TOP     ZFI_VAT_RET     FI: Report for VAT Return Top Include
ZFI_VAT_RET_F01     ZFI_VAT_RET     FI: Report for VAT Return Forms
ZMM_AUTO_GR_TOP     ZMM_FR_AUTO_GR     MM: Automated Goods Receipt Top include
ZMM_AUTO_GR_F01     ZMM_FR_AUTO_GR     MM: Automated Goods Receipt Forms
2.2.3     BSP Application
2.2.3.1     Main Application
Naming Convention: BSP Applications shall follow the same Naming Convention as Executable Programs i.e. Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text as illustrated in examples below.
2.2.3.2     Pages & Controllers
Naming Convention: <ffff>
Notes:
1.     Replace <ffff> with meaningful text, that adequately describes the function of the page/controller
2.2.3.3     Theme
Naming Convention: Z_<ffff>.
Notes:
1.     Replace <ffff> with meaningful text
2.2.3.4     Mime Objects:
Naming Convention: <ffff>
1.     A MIME Object can be logo for the company.
2.     Replace <ffff> with meaningful text, that adequately describes the function of the MIME objects
2.2.3.5     Controller and Handler Classes:
See section Classes (Section 2.2.133)
2.2.3.6     BSP Extension
Naming Convention: Z_<ffff>
Notes:
1.     Replace <ffff> with meaningful text
2.2.3.7     BSP Layout elements id
Label:     lb_fffff
Input field:     if_fffff
Button:     b_fffff
Text Edit:     te_fffff
Text View:     tv_fffff
Radio button Group:     rbg_fffff
Radio button:     rb_fffff
Check Box Group:     cbg_fffff
Check Box     cb_fffff
Tray     tr_fffff
Tabstrip     ts_fffff
Tableview      tab_fffff
1. Replace <fffff> with meaningful text
2.2.4     Logical Database
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text
3.     The maximum permissible length for LDB name is 20 characters. However, the name should be restricted to 15 characters to accommodate appropriate Include naming
4.     LDB Program and LDB Program Includes shall follow the naming convention Auto-Generated by SAP
2.2.5     SAP Scripts /Smartforms
Naming Convention: ZF<mm>_<ffff>.
Notes:
1.     Replace <mm> with module codes given in section 2.1.1 above.
2.     Replace <ffff> with meaningful text as illustrated in examples below.
Examples:
Form Name     Description
ZFFI_EMP_CONF     Employee Confirmation Letter
ZFFI_ANN_TO     Annual Turnover Letter To Customers and Vendors
2.2.6     Idocs
2.2.6.1     Idoc Types
Basic Type :
Naming Convention : ZB<FFFF>NN
Notes:
1.Replace <NN> with sequence number.
3.     Replace <ffff> with meaningful text.
Extension Type : ZX<Basic type name>_NN
Notes:
1.     Replace <NN> with sequence number .
2.2.6.2     Message Types
Naming Convention : ZM<mm><ffff>.
Notes :
1.   Replace <mm> with module codes given in section 2.1.1 above.
2. Replace <ffff> with meaningful text .
2.2.6.3      Process Code
Naming Convention : Z<ffff>.
Notes :
1.     Replace <ffff> with meaningful text ..
2.2.6.4     IDOC Segments
Naming Convention : Z1<ffff>.
Notes :
1.Replace <ffff> with meaningful text as illustrated in examples below.
2.2.7     Transaction Code
Notes:
1.     The tcode name is provided by SAP TIN The Developer must write a mail to SAP Tin asking for the T-Code name with a filled form.
The form can be found at :
2.2.8     Function Groups
Naming Convention: Z<mm><ffff>
Notes:
1.     Replace <mm> with relevant module code as given above
2.     Replace <ffff> with meaningful text.
2.2.8.1     Function Group Include Programs
Naming Convention: LZ<Function Group><Inn>.
Notes:
1.     All includes of Function Group program will be prefixed by LZ, followed by the Function Group name
2.     Replace <Inn> with include type and sequence number. Use the values from the table given in 2.2.2.1
Examples:
Include Name     Function Group Name     Description
SAPLZMMPURCHASING     ZMMPURCHASING     F.Group-Purchasing: Main Program
LZMMPURCHASINGO01     ZMMPURCHASING     F.Group-Purchasing: PBO
LZMMPURCHASINGI01     ZMMPURCHASING     F.Group-Purchasing: PAI
LZMMPURCHASINGF01     ZMMPURCHASING     F.Group-Purchasing: Forms
LZMMPURCHASINGTOP     ZMMPURCHASING     F.Group-Purchasing: Data Declarations
2.2.8.2     Function Modules
2.2.8.2.1     Normal Function Modules
Convention: Z_<mm>_<ffff>.
Notes:
1.     Replace <mm> with relevant module code as given above.
2.     Replace <ffff> with meaningful text.
2.2.8.2.2     IDOC Function Modules
Convention: Z_IDOC_<mode>_<msg type>.
Notes:
1.     Replace <mode> with INPUT or OUTPUT depending on whether the function processes incoming or outgoing IDOC.
2.     Replace <msg type> with the IDOC message type.
2.2.9     Dictionary Objects
Tables:      Z<mm><ffff>
Structures:      ZS<mm><ffff>
Views:      ZV<mm><ffff>
Data Element:      ZDE<mm><ffff>
Domain:      ZDO<mm><ffff>
Table Type:      ZTT<mm><ffff>
Type Group:      Z<ffff>
Search Help:      ZSH<mm><ffff>
Lock Object:      EZ<mm><ffff>
Notes:
1.     Replace <mm> with module code given above.
2.     Replace <ffff> with meaningful text.
2.2.10     Message Class
Naming Convention: Z<mm>_<ffff>.
Notes:
1.     Replace <mm> with Module codes given in section 2.1.1 above.
2.     Replace <ffff> with the sub-landscape of the Module that this Message Class caters to as illustrated in examples below.
3.     The maximum permissible length for development class is 30 characters
Examples:
Msg. Class     Description
ZFI_AR     FI: Account Receivables
ZCO_CCA     CO: Cost Center Accounting
2.2.11     Enhancement Projects (User Exits)
Convention: Z<XX><nn>.
Notes:
1.     XX is the application area code e.g. for sales it is SD etc.
2.     'nn' is one up number for one application area. It starts with 001.
3.     Maximum length of the Project name is 8.
Example: The name of the SD enhancement project can be ZSD001.
2.2.12     LSMW Objects
2.2.12.1     Project
Naming Convention: ZM_<ffff>.
Notes:
1.     1.     Replace <ffff> with meaningful text
2.     The maximum permissible length for Project name is 16 characters. But please limit it to 12.
Example : ZM_VENDOR
2.2.12.2     SubProject
Naming Convention: ZM_<ffff>_<n>.
Notes:
     Suffix Project name with a running sequence no.
Example : ZM_VENDOR_1
2.2.12.3     Object
Naming Convention: ZM_<ffff>_<n><n>.
Notes:
     Suffix Subproject name with a running sequence no.
Example : ZM_VENDOR_11
2.2.13     Classes
Naming Convention: ZCL_[IM/DF/BSPCO/BSPHN/BADI]_<ffff>.
1.     IM: Implementation Class;
DF: Definition Class
BSPCO: BSP Controller class
BSPHN: BSP Handler class
BADI : BADI implementation
2.     Replace <ffff> with meaningful text: In case of Implementation classes, it should preferably be the same as that of the Definition Class
3.     Example:
IMPLEMENTATION Class: ZCL_IM_REBATE_SETTL
DEFINITION: ZCL_DF_REBATE_SETTL
2.2.14     BOR Object Types
Object     Convention     Example
Supertype     Z<ffff>     ZLVAPPL
SubType     Z<SuperType><nn>     ZZLVAPPL01
Program     <Subtype>     ZZLVAPPL01
1.     Replace <nn> with a running 2 digit serial Number
2.     Replace <ffff> with meaningful text
2.2.15     Screen / Transaction Variants
Naming Convention: <tcode>_<ffff>
Where:
1.     Replace <tcode> with the t-code that will be assigned to this Variant
2.     Replace ffff with a meaningful text
E.g.:
For an SE16 variant for table KONA that will be used by T-Code Z_CH_SD_001:
Z_CH_SD_001_KONA
2.2.16     Area Menu
Naming Convention: Z<mm>_<Main Menu>_<Sub Menu><ffff>
Where:
1.     Replace <mm> with the Module code
2.     Followed by the hierarchical position of the immediate parent of this Area Menu
3.     Followed by a Meaningful text for this Menu
E.g.:
ZSD
ZSD_TAB
ZSD_TAB_VIEW
ZSD_TAB_UPDT
Notes:
1.     Clusters of Transactions should be introduced as Sub-Menus rather than as Folders
2.     As a gradual process, the current Clusters that exist as Folders should also be replaced with Sub-Menus
2.3     Naming of Sub-Objects
2.3.1     Program Sub-Objects
Naming of all the internal components of a program will be consistent across the project.
Naming Convention: <Prefix>ffff.
Notes:
1.     Replace <Prefix> with the component prefix values given in the table below.
Program Component     Prefixed by
Program Constants     C_
Global Variables     W_
Types Definition     T_
Global Structures     WA_
Global Internal Tables     I_
Select-Options     SO_
Parameters     PO_
Table Type     TT_
Field Symbols     FS_
Ranges     R_
Local Constants     LC_
Local Variables     L_
Local Static Variables     LS_
Local Internal Tables     LI_
Local Work Area     LWA_
Local Range     LR_
Field Groups     FG_
Container      CO_
Macro     MA_
Important: The Same sequence as above must be followed in the Data declaration part of all the ABAP/4 programs.
2.3.2     SAP Script /Smartform sub-objects
Naming of all the internal components of a SAPScript/SmartForm shall follow the same convention as for Programs (2.2.2), with the addition of the Field Label on the FRS. E.g. if the FRS has labeled a field for Sales Order Number as Field 27 on the Layout, the variable name should be W_27_VBELN.
3.     General Programming Guidelines
3.1     Modification Logs
At the top of every ABAP Object Modified by a Developer, there should be a Modification Log Every Line Created/Changed by the developer should be Identifiable by the TR Number.
ABAP Patterns: Following Patterns should be used for Uniform ModLogs:
Nature of Change     Pattern to Use
New Development     ZZNEWPROG
In-Line Logs     ZZLINE
Modification Logs at the Top of Object     ZZMODLOG
3.2     Program Organization
All the programs will be organized as described below.
3.2.1     Executable Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
3.2.2     Dialog Programs
TOP Include: For global data declarations
Form Include: For definition of all the FORMs.
PBO Include: Include for PBO Modules
PAI Include: Include for PAI Modules
3.3     Package
All the related objects within a sub-module of SAP will be developed under a single Package.
3.3.1     Adding Components to existing objects
When adding new workbench components to existing Objects, the same Package will be used as has been used for the existing Components
3.3.2     Creation of New Objects
When creating new Objects or new Sub-lanscapes, Packages used should have the Naming convention as in Section 2 Above
3.4     Program Messages
All the messages within a sub-module of SAP will be grouped under a single Message Class.
3.4.1     Adding Messages to existing landscapes
When adding new messages for existing Objects, the same Message Class will be used as has been used for the existing Objects
3.4.2     Creation of New Objects
When creating new Objects or new Sub-landscapes, Message classes used should have the Naming convention as in Section 2 Above
3.5     Dictionary Objects
Whenever you create a Z table in system always include MANDT field as the first field, except when the table contains client independent data. Also create the table with attribute Data Class as USER.
4.     Structure of ABAP Programs
4.1     Type
     When an ABAP program is run, its processing blocks are called. ABAP programs are controlled from outside the program itself by the processors in the current work process. For the purposes of program flow, we can summarize the screen processor and ABAP processor into the ABAP runtime environment. The runtime environment controls screens and ABAP processing blocks. It contains a range of special control patterns that call screens and processing blocks in certain orders. These sections are also called processors. When a ABAP program is run, the control passes between various processors.
     In the R/3 System, there are various types of ABAP program. The program type determines the basic technical attributes of the program, and must be set when created. The main difference between the different program types is the way in which the runtime environment calls its processing blocks.
     When an application program is run, it must at least call the first processing block from outside the program, that is, from the runtime environment. This processing block can then either call further processing blocks or return control to the runtime environment. When an ABAP program is started, the runtime environment starts a processor (dependent on the program type), which calls the first ABAP processing block.
     The following program types are relevant to application programming:
Type 1
     Type 1 programs have the important characteristic that they do not have to be controlled using user-defined screens. Instead, they are controlled by the runtime environment, which calls a series of processing blocks (and selection screens and lists where necessary) in a fixed sequence. User actions on screens can then trigger further processing blocks.
Type M
     The most important technical attribute of a type M program is that it can only be controlled using screen flow logic and run via a transaction code which is linked to the program and one of its screens (initial screen).
     ABAP programs with type M contain the dialog modules belonging to the various screens. They are therefore known as module pools.
Type F
     Type F programs are containers for function modules, and cannot be started using a transaction code or by entering their name directly.
     Type F programs are known as function groups. Function modules may only be programmed in function groups. The Function Builder is a tool in the ABAP Workbench that is used to create function groups and function modules. Apart from function modules, function groups can contain global data declarations and subroutines. These are visible to all function modules in the group. They can also contain event blocks for screens in function modules.
Type K
     Type K programs are containers for global classes in ABAP Objects. Type K programs are known as class definitions. The Class Builder is a tool in the ABAP Workbench that can be used to create class definitions.
Type J
     Type J programs are containers for global interface in ABAP Objects. Type J programs are known as interface definitions and are created in the Class Builder.
Type I
     Type I programs - called includes - are a means of dividing up program code into smaller, more manageable units. The coding of an include program can be inserted at any point in another ABAP program using the INCLUDE statement. There is no technical relationship between include programs and processing blocks. Includes are more suitable for logical programming units, such as data declarations, or sets of similar processing blocks. The ABAP Workbench has a mechanism for automatically dividing up module pools and function groups into include programs.
4.2     Status
P = SAP standard production program
K = Customer production program
S = System program
T = Test program
Application
     Categorize the program according to the purpose it fulfills.
4.3     Authority Check
Authority checks will be carried out as given in the respective FRSs.
4.4     Program Structure
ABAP programs are responsible for data processing within the individual dialog steps (ie. events) of an application program. This means that the program cannot be constructed as a single sequential unit, but must be divided into sections that can be assigned to the individual dialog steps. To meet this requirement, ABAP programs should have a modular structure. Each module is called a processing block. A processing block consists of a set of ABAP statements. When a program is run, effectively a series of processing blocks is called. Therefore, they should not be nested but modularized.
     Each ABAP program consists of the following two parts:
4.4.1     Declaration data for global data, classes and selection screens
     The first part of an ABAP program is the declaration part for global data, classes, and selection screens. This consists of:
     All declaration statements for global data. Global data is visible in all internal processing   blocks and should be defined using declarative statements that appear before the first processing block, in dialog modules, or in event blocks. Local data should not be declared in dialog modules or event blocks.
     All selection screen definitions.
     All local class definitions (CLASS DEFINITION statement). Local classes are part of ABAP Objects, the object-oriented extension of ABAP.
     Declaration statements which occur in procedures (methods, subroutines, function modules) form the declaration part for local data in those processing blocks. This data is only visible within the procedure in which it is declared.
4.4.2     Container for Processing Blocks
     The second part of an ABAP program contains all of the processing blocks for the program. The following types of processing blocks are allowed:
1.     Dialog modules (no local data area)
2.     Event blocks (no local data area)
3.     Procedures (methods, subroutines and function modules with their own local data area).
     Whereas dialog modules and procedures are enclosed in the ABAP keywords which define them, event blocks are introduced with event keywords and concluded implicitly by the beginning of the next processing block.
     All ABAP statements (except declarative statements in the declaration part of the program) are part of a processing block. Non-declarative ABAP statements, which occur between the declaration of global data and a processing block are automatically assigned to the START-OF-SELECTION processing block.
4.4.3     Calling Processing Blocks
     Processing blocks can be called from either the ABAP program or using ABAP commands which are themselves part of a processing block. Dialog modules and event blocks are called from outside the ABAP program. Procedures are called using ABAP statements in ABAP programs.
     Calling event blocks is different from calling other processing blocks for the following reasons:
     An event block call is triggered by an event. User actions on selection screens and lists, and the runtime environment trigger events that can be processed in ABAP programs. Define event blocks for the events that the program needs to react to (whereas a subroutine call, for example, must have a corresponding subroutine). This ensures that while an ABAP program may react to a particular event, it is not forced to do so.
4.5     Screen Flow Logic (Dialog Programs)
4.5.1     Place the AT EXIT COMMAND at the beginning of the flow logic.
Example:
PROCESS AFTER INPUT
   MODULE EXIT_1170 AT EXIT-COMMAND.
   MODULE PAINT_1170.
4.5.2     Use FIELD and CHAIN statements to keep fields in error open for correction.
Example:
   PROCESS AFTER INPUT.
   MODULE EXIT_1170 AT EXIT-COMMAND.
   CHAIN.
      FIELD BTCH1170-JOBNAME.
      FIELD BTCH1170-USERNAME.
      FIELD BTCH1170-FROM_DATE.
      FIELD BTCH1170-FROM_TIME.
      MODULE PAINT_1170.
   ENDCHAIN.
4.6     Main Program
4.6.1     Events
The Program MUST NOT be coded without the use of Proper Coding blocks
     Initializations
     Top-of-page during line-selection
     At Selection-Screen
     At Line-Selection
     At User-Command
     At Pfn
     Start-Of-Selection
     Top-Of-Page
     Get
     End-Of-Page
     End-Of-Selection
NOTE: The coding for each event should be logically split into forms (subroutines). That is to say, each event will comprise mostly of PERFORM statements.
5.     General Coding Standards
5.1     One command per line
Each ABAP/4 command consists of a sentence ending with a period. Multiple commands can be on one line; however, as a standard start each new command on a new line. This will allow for easier deleting, commenting, and debugging.
5.2     Indented Source Code
The ABAP/4 editor has a "Pretty Printer" command to indent by 2 positions specific lines of code and add subroutine comments. Event keywords are typically not indented.
5.3     Extended Syntax Check
Extended Program Check (EPC) to be done on each object to make sure the code is Syntactically correct. There should be no Error/warning messages in the code.
5.4     Reusability and Modularity
If a block of code is executed more than once, it should be placed in a subroutine at the bottom of the code. This makes the code more readable, requires less indentation, and is easier to debug since the debugger can jump through an entire subroutine via a PF key. Also, when possible parameters should be passed to and from subroutines to make the purpose easier to understand and reduce the need for global variables. Always document the purpose of each parameter.
5.5     Text Handling
Text elements must be used to display any text messages.
5.6     Usage of System Variables
The system variables should be used wherever possible. The SY-SUBRC is to be checked after any function call, selection operation, etc.
5.7     Chaining Statements
     Consecutive sentences with an identical beginning shall be combined into a chained statement.
Example:
Instead of the statements
MOVE SY-MANDT TO D00001-MANDT.
MOVE SY-LANGU TO D00001-SPRAS.
A chained statement shall be used
MOVE:
             SY-MANDT TO D00001-MANDT,
             SY-LANGU TO D00001-SPRAS,
             SY-UNAME TO D00001-BNAME.
5.8     Common Routines
     Standard sub-routines should be implemented as FUNCTION's rather than a FORM (ie. SUBROUTINE). A FUNCTION is easier to maintain and can be easily tested without a calling program. Standard SAP function modules are also available and the function library should be used to check if function modules already exist for a function that needs to be performed i.e.POPUP_TO_CONFIRM_LOSS_OF_DATA etc.
     Includes can also be created for re-usable or common code e.g. common data declaration statements.
5.9     Dialog Messages
Dialogue messages are stored in table T100. Programmers shall check to see if an appropriate message exists before adding a new message. Programs shall use the message-id which corresponds to the SAP module that the program most relates to.
5.10     Function Keys
PF-keys should be programmed to execute functions where required. SAP Standard function keys should be used where appropriate. The most commonly used buttons should be displayed as pushbuttons in the application toolbar.
5.11     Enqueuing and Dequeuing Data Objects
     All database objects being processed by a program, for purposes other than for display, shall be enqueued before such processing is executed. If the enqueue is unsuccessful, then a message shall be returned stating why the enqueue was unsuccessful.
     Enqueue and Dequeue objects should be created via the data dictionary.
5.12     Error Handling (SY-SUBRC)
     Return codes shall always be checked immediately after an event which returns a code.
Eg. Function calls, Select statements, Updates etc.
     The value of SY-SUBRC is 0 when successful and generally produces a value of 4 when unsuccessful (there are a few exceptions).
Therefore, rather check SY-SUBRC with:
           IF SY-SUBRC <> 0
than with
         IF SY-SUBRC = 4 (which is redundant and makes the system do a double check)
     Error messages displayed to the user must be clear and descriptive.
     Remember to group related / dependant steps together and to Rollback all changes for steps in that group should any one of them fail, thus maintaining the integrity of the system.
     Check whether an Error Log, (file), must be produced by your program and if so check on the format of the file.
     If any Error Logging is done to a custom table in the database then make sure this table is maintained and monitored correctly. (Dev. Note)
     Transaction SE91 provides the facility to create and utilize messages in their appropriate message class. Elaborate on the message if necessary, using the long text documentation for that message number.
5.13     General Conventions and Hints
     There should be NO hard coding of values in programs easy maintainability
     For amounts, use the CURRENCY command in write statements to automatically convert fields into their correct decimal format. The currency specified in the write statement is treated as a key for the table TCURX. If no entry exists for the currency specified, the system assumes two decimal places.
     For quantities, use the UNIT command in write statements to automatically convert fields into their correct decimal format. The contents of the unit specified are used on table T006. If no entry exists for the unit specified, the formatting has no effect.
     Use the LIKE statement as often as possible to declare DATA variables instead of an explicit TYPE declarations.
     Try to use the INCLUDE statement with standard SAP structures and tables for your structures and internal tables where possible. If you use the include statement to include other program components in your code then document what those components are, what they do and how to use them.
     Try to make use of standard SAP Function Modules wherever possible rather than building your own. Use the pull down functionality in transaction SE37 to find suitable standard function modules.
     Make use of the SAP PATTERN tool to automatically insert the standard code for:
     CALL FUNCTION
     MESSAGE ID
     SELECT*FROM
     PERFORM
     AUTHORITY-CHECK
     WRITE
     CASE
     CALL DIALOG
     The standard date format to use is DD/MM/YYYY. (Dev. Note)
The standard time format to use is HH:MM:SS.
5.14     Parameters in Sub-Routines
Naming convention for Parameters in subroutine is P_
6.     Performance Standards
6.1     General Tips on Performance Tuning
6.1.1     Avoid Redundant code
Avoid leaving "dead" code in the program. Comment out variables that are not referenced and code that is not executed. To analyze the program, use the Program Analysis function in SE38 -> Utilities -> Program Analysis.
6.1.2     Subroutine Usage
For good modularization, the decision of whether or not to execute a subroutine should be made before the subroutine is called.
Example:
IF f1 NE 0.
PERFORM sub1.
ENDIF.
FORM sub1.
ENDFORM.
6.1.3     Case vs. Nested IF
When testing fields "equal to" something, one can use either the nested IF or the CASE statement. The CASE is better for two reasons. It is easier to read and after about five nested IFs the performance of the CASE is more efficient.
6.1.4     Using the MOVE Statement
When records a and b have the exact same structure, it is more efficient to MOVE a TO b than to MOVE-CORRESPONDING a TO b.
6.1.5     SELECT Queries
The performance of any ABAP program mainly depends on the ABAP Queries used in it. More optimum the queries , better the performance. Take care of the points mentioned nin the following sections while writing any ABAP queries.
6.1.5.1     Using all the keys in SELECT statement
When using the SELECT statement, study the key and always provide as much of the left-most part of the key as possible. The SELECT * command is to be avoided everywhere.
6.1.5.2     Fetching Single Record
If the entire key can be qualified, code a SELECT SINGLE not just a SELECT. If all the keys are not available, we should use SELECT UPTO 1 ROWS if we are interested only in the first record.
6.1.5.3     Avoid SELECT-ENDSELECT
Selecting data into an internal table using an array fetch versus a SELECT-ENDELECT loop will give at least a 2x performance improvement. After the data has been put into the internal data, then row-level processing can be done.
Example:
select ... from table <..>
           into <itab>
           where ...
loop at <itab>
<do the row-level processing here>
endloop.
6.1.5.4     Using Indexs
Use indexes wherever possible. Tune the Query so that optimum Indexing will happen.
6.1.5.5     Provide all the keys
Give as many keys as possible in the WHERE clause to optimize the database fetching. Use the Index fields in the first position to optimize performance.
6.1.5.6     Avoid INTO CORRESPONDING
Avoid using INTO CORESPONDING FIELDS of Table. Instead, explicitly mention the fields. Else, The Table Fields should be in the same sequence as the selection
6.1.5.7     SELECT statement inside LOOP
Do not write SELECT statements inside the loop. Instead, use the FOR ALL ENTRIES Command
Before using FOR ALL ENTRIES command, check that the
1.     Corresponding Internal table is not empty. If the Internal table is empty, the statement will select ALL the entries in the Database
2.     The Internal table is sorted by the Filed used in the Where Clause: This makes selection faster
6.1.5.8     Nested SELECT statement
Avoid Using nested SELECT statements. Instead, make use of different internal tables to fetch the data, and Use Nested LOOPS to read them.
6.1.5.9     Select Distinct
Whenever its possible avoid SELECT DISTINCT, instead select data into internal table, sort and use DELETE ADJACENT DUPLICATES
6.1.5.10     Use of OR in Where Clause
Do not use OR when selecting data from DB table using an index because The optimizer generally stops if the WHERE condition contains an OR expression.
e.g.
Instead of
     SELECT * FROM spfli WHERE carrid = LH
                               AND (cityfrom = FRANKFURT OR
             city from = NEWYORK)
Use
     SELECT * FROM spfli WHERE (carrid = LH AND cityfrom = FRANKFURT)
                                  OR (carrid = LH AND cityfrom = NEWYORK).
6.1.5.11     Order By
ORDER BY will Bypass buffer. So, performance will decrease. If you want to sort data, it is efficient to SORT them in INTERNAL TABLE rather than using ORDER BY. Only use an ORDER BY in your SELECT if the order matches the index, which should be used.
6.1.6     Using the READ statement
When reading a single record in an internal table, the READ TABLE WITH KEY is not a direct READ. The table needs to be sorted by the Key fields and the command READ TABLE WITH KEY BINARY SEARCH is to be used.
6.1.7     Hashed table
If the number of entries in the Internal Table is high then use Hashed Table with Keys to access the table.
6.1.8     Transporting
With READ or MODIFY Statements use TRANSPORTING
6.1.9     Using LDB
In order to improve performance in case of an LDB, individual tables can be excluded from selection. Under the section Table Selection in the Documentation of LDB the fields with proper description has been given those fields can be set in the application report at the time of INITIALIZATION or at the START OF SELECTION. This can enhance the performance.
6.1.10     Append Lines of
Whenever it is possible use APPEND LINES OF to append the internal Tables instead of using loop and then APPEND Statement.
6.1.11     Use WHILE
Use WHILE instead of a DO+EXIT-construction, as WHILE is easier to understand and faster to execute
6.1.12     DELETE <itab> WHERE
Use DELETE <itab> WHEREfor deleting records from an internal table.
e.g.
Instead of
LOOP AT <itab> WHERE <field> = 0001
     DELETE <itab>.
ENDLOOP.
Use
DELETE <itab> WHERE <field> = 0001.
6.1.13     Using WHERE clause in LOOP.ENDLOOP
Use:
Sort ITAB by NAME.
Loop at itab where name EQ SY-UNAME
Endloop.
Instead Of:
Read itab with key name = SY-UNAME.
L_tabix = sy-tabix.
Loop at itab from l_tabix.
If name eq bijoy
Endif.
Endloop.

New ABAP Program to check Direct UPDATE in Database Table

Hi all,
As per customer requirement , I have to develop ONE Program which find out that in which ABAP Program , Programmer has used Open Sql command like UPDATE , DELETE , INSERT , MODIFY to direct update in Database Table.
Have a look on all Z-ABAPs, find out if there are statements with "update", "delete", "insert" or "modify" in the coding, then find out if updates to sap-Tables are done
How can I achived that ?
Please , If anybody is having idea , than please let me know..
Thanks You ,

Hi
Kindly refer to the below link. This has step by step how you can achieve the checks.
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/12659a90-0201-0010-c18b-9d014f9bed0d]
But if you want to check if any program they have used 'UPDATE' then you can do like below.
Go to SE38
Utilities---> Find in Source Code-
Find --- UPDATE
In program - Z* or ZX* if you want to search only in Exits
Regards,
Vijay V .

Best way to deal with hard coded variables in a package

There is a plsql package that reads a line from a file, parses the data, does a ton of sql operation with it (select update, inserts, calculations) and then writes the output to an output file.
The file names and the firectories are retieved from a database table.
Example:
select location,file_name into loc_in,file_in from temp_tbl;
p_File_handle := utl_file.fopen (loc_in, file_in, 'W');
My co worker is suggesting that getting the variable values from the table is not a good practice. He suggests that the values should be hard-coded in the program. Now you might ask what would happen if the file name or directory changes. His suggestion is to have a build file and do a token substitution of those hard coded values in the program and then load in to the DB. In short the process will involve the following steps:
-Get the package from the repostory.
-Change the file name and directory in the token file.
-Run the build process that will replace the values in the package .
-Load the new file (with the updated values) in to the DB.
Example:
This way the program will be initially coded like this:
p_File_handle := utl_file.fopen ('${loc_in}', '${file_in}', 'W');
After the build file runs, it will replace the values as
p_File_handle := utl_file.fopen ('C:/test', 'testfile.dat', 'W');
Once the file has changed with the new updated values, compile that into the database.
Ideas/comments?

Re: Best way to deal with hard coded variables in a package: why have you reposted using a new profile?
Neither post provides enough clear information on what the actual requirement is. We need more data in order to comment on your idea, your co-worker's, or to suggest alternatives.
My co worker is suggesting that getting the variable
values from the table is not a good practice.His reasons for this are...?
"variable values": Why do they vary? How often do they change?
The file names and the directories are retrieved from
a database table.How do the values get into the table? What is the volume of the data?
Oracle version? Operating system?

How to check frequency of ABAP program usage

Dear Experts,
How to find out the frequency of ABAP programs executed by users? the reason is because we want to do a housekeeping on all the ABAP reports that we have developed over the years, we want to deactivate those reports that are no longer executed by the user within 1 year. Anyone can give suggestion?
I already tried using SM36, but this is only for those programs scheduled in background or immediate, how about those programs running on foreground?

Hello,
You can use the trxn SM20N. But bear in mind some prior config needs to be in place for the logging to be active (trxn SM19).
For further details on SM20 read this: [Security Audit Log|http://help.sap.com/SAPhelp_nw70/helpdata/en/2c/c59d37d373243de10000009b38f8cf/frameset.htm]
@Sap Fan: STAD can be used in case the audit log is not available (e.g., due to missing config) but afaik there is a limitation on the date range you can provide.
BR,
Suhas
Edited by: Suhas Saha on Sep 7, 2010 9:39 AM

How to read a word in a abap program for syntax check

program for finding keywords:
into a given program name in selection screen.
e.g Parameters Keyword in YXABC propgram.
How to find a word in a abap program for syntax check

Hi!
Read table TNAPR for the program names.
Then use the READ REPORT statement for it and load the program into an internal table.
Then loop at the table.
Regards
Tamá

How to write a program to read any texts in any ABAP program?

Hi Experts,
How can I write a program to read specific coding section or any texts in any ABAP program?
For example, I want to wirte a program to count how many 'LOOP' and 'ENDLOOP' are in any other program.
Thanks!
Best regards,
Hao

Hi,
Follow the given below URL for the program to read another Program into an internal Table.
http://abap4.tripod.com/Upload_and_Download_ABAP_Source_Code.html
Once the Code is there in the Internal Table , you can do the necessary string search.

Finding Hard coded Text in ABAP program

Similar Messages

Maybe you are looking for