Finding iCal data (for unclear reasons lost) in Time Machine

When I opened iCal today all the information in my calendars was gone (except for birthdays from the addresse book). I have time machine backups but can't understand where to find this information. Could anyone advise?
(I do not understand why the data went missing in the first place)

To restore I installed Mavericks on the new, blank drive using the install app from the app store and then during that installation I chose Time Machine when it got up to the data migration part.
My time machine backups are on an external Seagate drive which I have never had problems with.
Nothing is excluded that shouldnt be, only music and photos because I back them up elsewhere.

Similar Messages

  • Unable to find security data for sender

    Hello, does anybody know what this message means. The problem appear when I send an Idoc to XI. Other interfaces (Master data) are working properly. My question is, do I need to make some extra settings for the transactional data interfaces (SHPMNT)?
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Technical Routing
      -->
    - <SAP:ErrorHeader xmlns:SAP="http://sap.com/exchange/MessageFormat">
      <SAP:Context />
      <SAP:Code p1="sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages" p2="VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries" p3="" p4="">PHYROU.UNDEFINED_SECURITY</SAP:Code>
      <SAP:Text language="EN">Technical routing: Unable to find security data for sender sapdev222,SHPMNT.SHPMNT05/urn:sap-com:document:sap:idoc:messages for receiver VENDORMASTER_WOLTERKLUWER_ERP_BE,IDZ0001_DeliveryReplicate_IB/http://wolterskluwer.com/xi/midas_deliveries</SAP:Text>
      </SAP:ErrorHeader>
    regards
    Ernesto Duran

    HI,
    i am also getting the same error in my scenario. Could u plz inform me what is the solution?
    Rgds,
    Ram Sri

  • Debuging mapping - error : Could not find test data for target operators ?

    Hello, Please help me.
    I use Oracle Warehouse Builder 10gR2.
    I created a cube with two dimensions.
    I debugged the mappings of these two dimensions then viewed their data after deployment.
    I tried to debug the mapping of the cube, and got the error: Could not find test data for all source and target operators.
    For source objects exist test data but for the target operator (cube_out) logically we do not need test data !!!! .
    But the error is here: Could not find test data for target operators. Why ??
    How to configure or explain to owb that the target operator do not have test data ????
    I need your help.
    thank you in advance.

    Sorry, I can not understand your approach ?
    I explain you in detail : I work in ROLAP.
    I have two dimensions : DIM_1 and DIM_2 linked with the cube (Fact_table).
    I have three mappings : MAP_DIM1, MAP_DIM2, MAP_CUBE.
    For the MAP_CUBE, I have source operator : VIEW_IN and Target operator : CUBE_OUT.
    I could see the data dimensions : DIM_1 and DIM_2 after debugging and Deployment in the OLAP schema.
    I tried debugged the mapping: MAP_CUBE so I got the error: Could not find test data for all source and target operators.*
    thank you for help.

  • I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

    I bought an external hard drive for backups to use with Time Machine, but however when I try to connect it with the other windows laptop it doesn't work ? intact it doesn't work on any other device except my MAC ?

    Do not worry about it.
    Time Machine needs that your external drive is formatted in HFS+, or better known as "Mac OS Extended (Journaled)". This filesystem is used by Apple on Macs and Windows cannot read or write drives formatted with this filesystem, being this the reason why all your devices do not read the external drive except your Mac.
    You can only use your external drive to make Time Machine drives. If you store anything different, you may damage the Time Machine structure, so it is better not to use it as a drive to store other data. Instead, get another external drive to do it or create a second partition on the external drive formatted in FAT32 by using Disk Utility > http://pondini.org/OSX/DU3.html FAT32 can be read by Windows PCs

  • I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

    I just bought and backed up my computer and time machine with a "Seagate BackUp Plus for Mac". Now my time machine is empty. Panicked. can anyone help?

    Lets start over...
    Please restart the network.. shut down everything..
    Restart in order.. modem.. router.. if different to TC.. or TC.. client devices.. wait 2min between each startup.
    If the TC does not show up on the computer, in finder.. then we need more info.. what OS are you running?
    Does the TC show up in Airport utility? Are you running wireless or ethernet?
    If you still have issues.. plug the TC directly into the computer by ethernet.
    Do a full factory reset of the TC.. and see if it now shows up.
    Please tell us exactly what model TC it is and how old.. the A1xxx model number from the base will help if you don't know.
    You take a screen shot of the TC opened in finder.
    eg..
    My TC is named Tardis4.. click on it.. and then open the data folder.. on this one called Tardisdata.
    Then take a screen shot of it so we can see what the problem is.. screenshot.. with area selection.. control + shift + 4 .. the picture goes into the desktop.. and then you click the picture icon in the posting web page controls and select the picture.

  • Hello  I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.  i plugged in the

    Hello
    I bought my wife a new MacBook Pro, in setting it up for her, I took her Time Machine external drive to migrate onto the new machine but her old MBP not only was on 10.6, it was my old machine which I was still Administrator for.
    i plugged in the external drive to start the migration process after entering her name and username from the old machine which gave me the options on transferring the old data over.
    I also unchecked the Administrative end that had my info hoping that ONLY her data, files, etc., would be the ones sent over to her new machine which I wanted her to be the ONLY Administrator for. All went like clockwork until the restart.
    Normally the screen should show the username and only need the password but both entries were blank, as in ‘Other’ sign in option available only. I entered her name and password, nothing….used her username and password, nothing. Used my old Administrator name and password, NOTHING!
    I tried defaulting to factory settings from the Restore feature but it directs me to notify Apple. I tried in Terminal to change the password, nothing. I tried to boot from MY external drive and it doesn’t recognize it. I tried to even use my external drive which actually has the Mavericks upgrade, nothing!
    Basically I can only get the startup screen which isn’t accepting the username/password or the Restore feature which doesn’t offer any options helpful!
    Please, how do I start from scratch and start over here? Or simply change the Administrator name and password so I can proceed with everything thats already on there? I wish I could even boot from another drive but no luck on anything!

    First, on the old machine, make your wife's account an admin one. Log into it and delete yours. Then, update the TM backup. Finally, use Internet recovery mode, ⌘⌥R, erase the HD, and restore the OS. One first boot, follow the steps outlined in Pondini's Setup New Mac guide.

  • I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine".  I need the back up data that I could access on my old mac book pro (that is now broken). Tnx so much

    I have a new mac book pro/LION and can't access my back up data when I click on "enter time machine".  I need the back up data that I could access on my old mac book pro (that is now broken). I can only access time machine  back up data that I've obtained since starting the new mac book pro.  Tnx so much

    Try doing a click-and-hold on the Time Machine icon in the Dock, then select "Browse Other Time Machine Disks".
    By the way, you've been misled by poor field labeling on this forum into typing a large part of your message into the field intended for the subject.  In the future just type a short summary of your post into that field and type the whole message into the field below that.

  • I use Time Machine with an external hard disc which has worked perfectly for some years.  Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system.  Any ideas?

    I use Time Machine with an external hard disc which has worked perfectly for some years.  Recently Time Machine has aborted backups if the screen saver starts when back-up is in progress. I use a Maxtor OneTouch4 back-up system.  Any ideas?
    Has Apple recently up-dated my OS (Lion) such that every time the screen saver starts it disables Time Machine.  I have to switch-off the computer and re-start in order to undertake  a back-up.  I have now switched of all screen savers.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode.)

  • How can i do for force disk encryption with time Machine by MCX

    Hi Hello
    I have a Lion server and my clients Mac Os X, and when the users use time machine for backup data, i want force encrypt disk
    How i can do for force that by mcx ?
    thanks for your help

    No. A Time Machine backup drive should have at least twice the capacity of the drive it backs up. You would need at least a 4 TB backup drive for Time Machine.
    Might I suggest as an alternative that you not use Time Machine but a third-party backup utility that simply overwrites older files with new ones such that the backup drive can be the same capacity as the drive backed up.
    Suggested Backup Software
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Others may be found at MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.

  • Lost in Time Machine

    Document completely lost in Time Machine.
    Any other way to recover? Trash does not have document

    A few more details would be helpful. When was the document created and deleted in relation to when your backups happen in Time Machine? Did you move the document so it might be in a different location in Time Machine?
    There are programs and services that can recover lost files, but the more you use the machine after having deleted a file, the less likely you are to be able to recover it. I've never used them, but products like FileSalvage from SubRosa and DataRescue from Prosoft Engineering might be able to get the file back.

  • Hi, I am trying to connect a WD Mybook for Mac to my airport/time machine device.  On the AirPort Utility it listed under Disks at 0 Mb.  I enabled file sharing.  But nothing happens.  If I plug it directly into my MacBook it works fine.  How do I fix it?

    I am trying to connect a WD Mybook for Mac to my airport/time machine device.  On the AirPort Utility it listed under Disks at 0 Mb.  I enabled file sharing.  And also followed all the steps - "secured disk access: with a disk passord", "Airport disk guest access: read and write", "Share disks over WAN". But nothing happens.  If I plug it directly into my MacBook it works fine.  How do I fix it?  Also, its connected via a powered usb hub.

    I assume that you are using  Mac operating system 10.4.11, as your profile indicates.
    The instructions that you referenced are for use with AirPort Utility....not AirPort Admin Utility.
    Suggest that you download and install AirPort Utility 5.4.2 for Mac , which will run on 10.4.11.
    Also noticed that the instructions do not tell you that the hard drive should be formatted in Mac OS Extended (Journaled) to work with the AirPort Extreme, but they should.

  • How can I find photos in iPhoto 4.0.3 from Time Machine?

    How can I find photos in iPhoto 4.0.3 from Time Machine? I'm using an eMac with OS X 10.5.8.

    Hi Gary,
    I never use TM myself...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • My mac book air connects to my network and gets internet access but time machine cannot find my airport base station to set up time machine

    My mac book air connects to my network and gets internet access but airport utility  cannot find my airport base station to set up time machine

    airport utility  cannot find my airport base station to set up time machine
    Normally, AirPort Utility is not used or needed to set up Time Machine backups......unless a default setting on the Time Capsule to Enable File Sharing has been changed.
    On the other hand, if you open AirPort Utility, a picture of the Time Capsule should be displayed. Are you saying here that the Time Capsule does not appear when you open AirPort Utility?

  • How to find compensation data for the year

    Dear All,
    Scenario:
    A company wants to know the comepnsation data for financial year 2009-2010.
    Problem: I couldnot find a single report which can provide the compensation of an employee for the year.
    We are trying to build a report however needs input if anyone has done that:
    Table which stores this data is PS_COMPENSATION.
    Problem is : it stores data in effective date.
    How to then convert it into a year -April 2010 to March 2011
    For example: cases
    a. existing employee: whose effective comp data will be less than April 2010
    - Plus, there are pay rate changes between April 2010 to march 2011. (Pay rate change can happen on any date of the month)
    - How can I add them to find the Compensation as per comp page from 1st April to 31st march 2011

    I'm afraid what you're looking for is not likely to be a trivial task. If you have all of the modules required for the "Report Total Compensation" product, then you should take a look at the associated PeopleBook. I think you will have to be on HRMS 9.0 at a minimum, and using Payroll for North America and Benefits Administration.
    To create a custom solution, you may have to consider a variety of other factors such job status--leave, terminated, terminated with pay, etc.--hourly vs. salaried, part time vs. full time, multi-job, variable compensation. It will depend entirely on the specific features that are being used at your site.
    If you provide a very detailed example of the output you are looking for with sample data, someone might be willing to offer a solution.
    Regards,
    Bob

  • Can we block the business partner master data for embargo reason?

    Hi,Experts:
       Do you know if we can add the embargo block on business partner master data in GTS just like SPL checking?
    Thanks

    Embargo checking in SAP GTS can be enforced using any combination of the following:
    country-to-country, country group to country, or all countries to country.
    The check is based on the combination of the country of departure and the country of destination (or groups of countries).
    If the system detects an embargo situation, the document is blocked for further processing.
    IF you want to block Business partner for embargo reason,
    you may have to do some code enhancement(abap coding based) for the same.

Maybe you are looking for