Finding IMG activity for BADI
Hi,
I know the name of a BADI that has to be used, but I am unable to find the IMG activity corresponding to that, to create an implementation.
Can you please suggest how I can find it ?
Thanks in advance,
Archana
Hello Archana,
One way is to go in IMG by module-wise and searching for it manually...
To create an implementation of the BADI we can go to Se19...give a name and give create ..and when the definitopn window pops up..give the name of the BADI for which the implemetation needs to be done....(Pls check in Se18 if the BADI exists...also there are some cases where an implementation of a BADI cannot be done since the BADI is for SAP use only or if the BADI doesnot support multiple instances)
Please can you revert the requirement for the check using IMG Activity..since we can create implementations through se19 (because we already have a BADI name)
Regards
Byju
Similar Messages
-
To find out user exit/ badi for the VT01n transaction triggered in Save
Hi Friends,
I have the following requirement and for this appropriate user exit/ badi should be needed which will trigger during saving of the shipment.
Cass shipment type (VTTK-ADD03) field needs to be required and should be automatically populated upon creation of the shipment document. The rules for populating the value (SO, ST, PO and RA) are as follows:
If any of the orders on the shipment are customer order types, then the CASS shipment type should be a SO,
If all of the orders are STO orders, then the Cass shipment type should be "ST",
If all of the orders are PO orders, then the Cass shipment type should be "PO" , and
If all of the orders are customer return orders, then the Cass shipment type should be "RA".
I have tried with the 3 badi available and 7 to 8 user exit, but it won't work.
Thanking a lot in advance for giving the solution.
With Regards,
Ajit.Hi,
This code will give you all the user-exits.
Code:
& Report ZPJA_PM002 (Ver4) &
& PJA Consultancy Services (www.pjas.com) &
& This report attmpts to find Enhancements, Program-Exits, BADIs &
& and Business Transaction Events in a particular program/tcode. &
& Other search options: &
& Program: RPR_ABAP_SOURCE_SCAN &
& FModule: &
& Text Elements: &
& P_DEVC Show user-exits from development class &
& P_LIMIT Limit submit program selection &
& P_FUNC Show function modules &
& P_SUBM Show submit programs &
& S01 Selection data (TCode takes precedence over program name) &
report zpja_pm002
no standard page heading
line-size 221.
data: tabix like sy-tabix,
w_linnum type i,
w_off type i,
w_index like sy-tabix,
w_include like trdir-name,
w_prog like trdir-name,
w_incl like trdir-name,
w_area like rs38l-area,
w_level,
w_fsel like sy-ucomm, " Determination of screen field
w_str(50) type c,
w_funcname like tfdir-funcname.
constants: c_fmod(40) type c value 'Function modules selected: ',
c_subm(40) type c value 'Submit programs selected: ',
c_col1(12) type c value 'Enhanmt Type',
c_col2(40) type c value 'Enhancement',
c_col3(30) type c value 'Program/Include',
c_col4(20) type c value 'Enhancement Name',
c_col5(40) type c value 'Enhancement Description',
c_col6(8) type c value 'Project',
c_col7(1) type c value 'S',
c_col8(12) type c value 'ChangeName',
c_col9(10) type c value 'ChangeDate'.
Work Areas: ABAP Workbench
data: begin of wa_d010inc.
data: master type d010inc-master.
data: end of wa_d010inc.
data: begin of wa_tfdir.
data: funcname type tfdir-funcname,
pname type tfdir-pname,
include type tfdir-include.
data: end of wa_tfdir.
data: begin of wa_tadir.
data: devclass type tadir-devclass.
data: end of wa_tadir.
data: begin of wa_tstc.
data: pgmna type tstc-pgmna.
data: end of wa_tstc.
data: begin of wa_tstcp.
data: param type tstcp-param.
data: end of wa_tstcp.
data: begin of wa_enlfdir.
data: area type enlfdir-area.
data: end of wa_enlfdir.
Work Areas: BADIs
data: begin of wa_sxs_attr.
data: exit_name type sxs_attr-exit_name.
data: end of wa_sxs_attr.
data: begin of wa_sxs_attrt.
data: text type sxs_attrt-text.
data: end of wa_sxs_attrt.
Work Areas: Enhancements
data: begin of wa_modsap.
data: member type modsap-member.
data: end of wa_modsap.
data: begin of wa_modsapa.
data: name type modsapa-name.
data: end of wa_modsapa.
data: begin of wa_modsapt.
data: modtext type modsapt-modtext.
data: end of wa_modsapt.
Work Areas: Business Transaction Events
data: begin of wa_tbe01t.
data: text1 type tbe01t-text1.
data: end of wa_tbe01t.
data: begin of wa_tps01t.
data: text1 type tps01t-text1.
data: end of wa_tps01t.
user-exits
types: begin of ty_mod,
member like modact-member,
name like modact-name,
status like modattr-status,
anam like modattr-anam,
adat like modattr-adat,
end of ty_mod.
data: w_mod type ty_mod.
types: begin of t_userexit,
type(12) type c,
pname like trdir-name,
txt(300),
level type c,
modname(30) type c,
modtext(60) type c,
modattr type ty_mod,
end of t_userexit.
data: i_userexit type standard table of t_userexit with header line.
Function module developmnet classes
types: begin of t_devclass,
clas like trdir-clas,
end of t_devclass.
data: i_devclass type standard table of t_devclass with header line.
types: begin of t_enlfdir,
area type enlfdir-area,
end of t_enlfdir.
data: i_enlfdir type standard table of t_enlfdir with header line.
Submit programs
types: begin of t_submit,
pname like trdir-name,
level,
done,
end of t_submit.
data: i_submit type standard table of t_submit with header line.
Source code
types: begin of t_sourcetab, "#EC * (SLIN lügt!)
line(200), "#EC * (SLIN lügt!)
end of t_sourcetab. "#EC * (SLIN lügt!)
data: sourcetab type standard table of t_sourcetab with header line.
data c_overflow(30000) type c.
Description of an ABAP/4 source analysis token
data: i_stoken type standard table of stokex with header line.
data wa_stoken like i_stoken.
Description of an ABAP/4 source analysis statement
data: i_sstmnt type standard table of sstmnt with header line."#EC NEEDED
keywords for searching ABAP code
types: begin of t_keywords,
word(30),
end of t_keywords.
data: keywords type standard table of t_keywords with header line.
function modules within program
types: begin of t_fmodule,
name like rs38l-name,
pname like trdir-name,
pname2 like trdir-name,
level,
bapi,
done,
end of t_fmodule.
data: i_fmodule type standard table of t_fmodule with header line.
& Selection Options &
selection-screen begin of block selscr1 with frame title text-s01.
parameter: p_pname like trdir-name memory id rid,
p_tcode like syst-tcode,
p_limit(4) type n default 100,
p_devc like rihea-dy_ofn default ' ',
p_func like rihea-dy_ofn default ' ',
p_subm like rihea-dy_ofn default ' '.
selection-screen end of block selscr1.
& START-OF-SELECTION &
start-of-selection.
if p_pname is initial and p_tcode is initial.
message e008(hrfpm). "Make entry on the selection screen
stop.
endif.
ensure P_LIMIT is not zero.
if p_limit = 0.
p_limit = 1.
endif.
perform data_select.
perform get_submit_data.
perform get_fm_data.
perform get_additional_data.
perform data_display.
& Form DATA_SELECT &
form data_select.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get programs/includes' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
determine search words
keywords-word = 'CALL'.
append keywords.
keywords-word = 'FORM'.
append keywords.
keywords-word = 'PERFORM'.
append keywords.
keywords-word = 'SUBMIT'.
append keywords.
keywords-word = 'INCLUDE'.
append keywords.
if not p_tcode is initial.
get program name from TCode
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
if not wa_tstc-pgmna is initial.
p_pname = wa_tstc-pgmna.
TCode does not include program name, but does have refereve TCode
else.
select single param from tstcp into wa_tstcp-param
where tcode eq p_tcode.
if sy-subrc = 0.
check wa_tstcp-param(1) = '/'.
check wa_tstcp-param+1(1) = '*'.
if wa_tstcp-param ca ' '.
endif.
w_off = sy-fdpos + 1.
subtract 2 from sy-fdpos.
if sy-fdpos gt 0.
p_tcode = wa_tstcp-param+2(sy-fdpos).
endif.
select single pgmna from tstc into wa_tstc-pgmna
where tcode eq p_tcode.
p_pname = wa_tstc-pgmna.
if sy-subrc <> 0.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
else.
message e110(/saptrx/asc) with 'No program found for: ' p_tcode."#EC NOTEXT
endif.
endif.
endif.
Call customer-function aus Program coding
read report p_pname into sourcetab.
if sy-subrc > 0.
message e017(enhancement) with p_pname raising no_program."#EC *
endif.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
overflow into c_overflow
with includes.
if sy-subrc > 0. "keine/syntakt. falsche Ablauflog./Fehler im Skanner
message e130(enhancement) raising syntax_error. "#EC *
endif.
check I_STOKEN for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '0'.
w_prog = ''.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endform. "DATA_SELECT
& Form GET_FM_DATA &
form get_fm_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get function module data' "#EC NOTEXT
exceptions
system_failure
communication_failure. "#EC *
Function module data
sort i_fmodule by name.
delete adjacent duplicates from i_fmodule comparing name.
loop at i_fmodule where done ne 'X'.
clear: i_stoken, i_sstmnt, sourcetab, wa_tfdir, w_include .
refresh: i_stoken, i_sstmnt, sourcetab.
store function groups
select single area from enlfdir into wa_enlfdir-area
where funcname = i_fmodule-name.
i_enlfdir-area = wa_enlfdir-area.
append i_enlfdir.
Store development classes
if not wa_enlfdir-area is initial.
select single devclass into wa_tadir-devclass
from tadir where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = wa_enlfdir-area.
check not wa_tadir-devclass is initial.
move wa_tadir-devclass to i_devclass-clas.
append i_devclass.
endif.
clear wa_tfdir.
select single funcname pname include from tfdir into wa_tfdir
where funcname = i_fmodule-name.
check sy-subrc = 0.
call function 'FUNCTION_INCLUDE_SPLIT'
exporting
program = wa_tfdir-pname
importing
group = w_area.
concatenate 'L' w_area 'U' wa_tfdir-include into w_include.
i_fmodule-pname = w_include.
i_fmodule-pname2 = wa_tfdir-pname.
modify i_fmodule.
read report i_fmodule-pname into sourcetab.
if sy-subrc = 0.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
message e130(enhancement) raising syntax_error.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_level = '1'.
w_prog = i_fmodule-pname2.
w_incl = i_fmodule-pname.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
endloop.
sort funtion groups
sort i_devclass.
delete adjacent duplicates from i_devclass.
sort i_enlfdir.
delete adjacent duplicates from i_enlfdir.
endform. "GET_FM_DATA
& Form GET_SUBMIT_DATA &
form get_submit_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get submit data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
w_level = '0'.
loop at i_submit where done ne 'X'.
check i_submit-pname ne p_pname. " ensure not the same as origianl program
clear: i_stoken, i_sstmnt, sourcetab.
refresh: i_stoken, i_sstmnt, sourcetab.
read report i_submit-pname into sourcetab.
if sy-subrc <> 0.
delete i_submit.
continue.
else.
scan abap-source sourcetab tokens into i_stoken
statements into i_sstmnt
keywords from keywords
with includes.
if sy-subrc > 0.
continue.
endif.
check i_stoken for entries
clear w_linnum.
describe table i_stoken lines w_linnum.
if w_linnum gt 0.
w_prog = i_submit-pname.
w_incl = ''.
perform data_search tables i_stoken using w_level w_prog w_incl.
endif.
endif.
restrict number of submit program selected for processing
describe table i_submit lines w_linnum.
if w_linnum ge p_limit.
w_level = '1'.
endif.
i_submit-done = 'X'.
modify i_submit.
endloop.
sort i_submit.
delete adjacent duplicates from i_submit comparing pname.
endform. "GET_SUBMIT_DATA
& Form DATA_SEARCH &
form data_search tables p_stoken structure stoken
using p_level p_prog p_incl.
loop at p_stoken.
clear i_userexit.
tabix = sy-tabix + 1.
i_userexit-level = p_level.
if i_userexit-level = '0'.
if p_incl is initial.
i_userexit-pname = p_pname.
else.
concatenate p_pname '/' p_incl into i_userexit-pname.
endif.
else.
if p_incl is initial.
i_userexit-pname = p_prog.
else.
concatenate p_prog '/' p_incl into i_userexit-pname.
endif.
endif.
Include
if p_stoken-str eq 'INCLUDE'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs 'STRUCTURE'.
check not wa_stoken-str cs 'SYMBOL'.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Enhancements
if p_stoken-str eq 'CUSTOMER-FUNCTION'.
clear w_funcname.
read table p_stoken index tabix.
translate p_stoken-str using ''' '.
condense p_stoken-str.
if p_prog is initial.
concatenate 'EXIT' p_pname p_stoken-str into w_funcname
separated by '_'.
else.
concatenate 'EXIT' p_prog p_stoken-str into w_funcname
separated by '_'.
endif.
select single member from modsap into wa_modsap-member
where member = w_funcname.
if sy-subrc = 0. " check for valid enhancement
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
append i_userexit.
else.
clear wa_d010inc.
select single master into wa_d010inc-master
from d010inc
where include = p_prog.
concatenate 'EXIT' wa_d010inc-master p_stoken-str into w_funcname
separated by '_'.
i_userexit-type = 'Enhancement'.
i_userexit-txt = w_funcname.
endif.
endif.
BADIs
if p_stoken-str cs 'cl_exithandler='.
w_index = sy-tabix + 4.
read table p_stoken index w_index into wa_stoken.
i_userexit-txt = wa_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-type = 'BADI'.
append i_userexit.
endif.
Business transaction events
if p_stoken-str cs 'OPEN_FI_PERFORM'.
i_userexit-type = 'BusTrEvent'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
i_userexit-modname = i_userexit-txt+16(8).
case i_userexit-txt+25(1).
when 'E'.
clear wa_tbe01t.
select single text1 into wa_tbe01t-text1 from tbe01t
where event = i_userexit-txt+16(8)
and spras = sy-langu.
if wa_tbe01t-text1 is initial.
i_userexit-modtext = ''. "#EC NOTEXT
else.
i_userexit-modtext = wa_tbe01t-text1.
endif.
i_userexit-modname+8 = '/P&S'. "#EC NOTEXT
when 'P'.
clear wa_tps01t.
select single text1 into wa_tps01t-text1 from tps01t
where procs = i_userexit-txt+16(8)
and spras = sy-langu.
i_userexit-modtext = wa_tps01t-text1.
i_userexit-modname+8 = '/Process'.
endcase.
append i_userexit.
endif.
Program exits
if p_stoken-str cs 'USEREXIT_'.
i_userexit-type = 'Program Exit'.
i_userexit-txt = p_stoken-str.
replace all occurrences of '''' in i_userexit-txt with space.
append i_userexit.
endif.
Submit programs
if p_stoken-str cs 'SUBMIT'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
check not p_stoken-str cs '_'. " ensure not SUBMIT_XXX
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
check not wa_stoken-str cs '_'. " ensure not SUBMIT_XXX
replace all occurrences of '''' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
i_submit-level = p_level.
append i_submit.
endif.
endif.
Perform routines (which reference external programs)
if p_stoken-str cs 'PERFORM'.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if not wa_stoken-ovfl is initial.
w_off = wa_stoken-off1 + 10.
w_str = c_overflow+w_off(30).
find ')' in w_str match offset w_off.
w_off = w_off + 1.
wa_stoken-str = w_str(w_off).
endif.
check wa_stoken-str cs '('.
w_off = 0.
while sy-subrc = 0.
if wa_stoken-str+w_off(1) eq '('.
replace section offset w_off length 1 of wa_stoken-str with ''.
replace all occurrences of ')' in wa_stoken-str with space.
read table i_submit with key pname = wa_stoken-str.
if sy-subrc <> 0.
i_submit-pname = wa_stoken-str.
append i_submit.
endif.
exit.
else.
replace section offset w_off length 1 of wa_stoken-str with ''.
shift wa_stoken-str left deleting leading space.
endif.
endwhile.
endif.
Function modules
if p_stoken-str cs 'FUNCTION'.
clear i_fmodule.
check p_level eq '0'. " do not perform for function modules (2nd pass)
w_index = sy-tabix + 1.
read table p_stoken index w_index into wa_stoken.
if wa_stoken-str cs 'WF_'.
if wa_stoken-str cs 'IDOC'.
break-point.
endif.
if wa_stoken-str cs 'BAPI'.
i_fmodule-bapi = 'X'.
endif.
replace first occurrence of '''' in wa_stoken-str with space.
replace first occurrence of '''' in wa_stoken-str with space.
if sy-subrc = 4. " didn't find 2nd quote (ie name truncated)
clear wa_tfdir.
concatenate wa_stoken-str '%' into wa_stoken-str.
select single funcname into wa_tfdir-funcname from tfdir
where funcname like wa_stoken-str.
if sy-subrc = 0.
i_fmodule-name = wa_tfdir-funcname.
else.
continue.
endif.
else.
i_fmodule-name = wa_stoken-str.
endif.
read table i_fmodule with key name = i_fmodule-name.
if sy-subrc <> 0.
i_fmodule-level = p_level.
append i_fmodule.
endif.
endif.
endloop.
endform. "DATA_SEARCH
& Form GET_ADDITIONAL_DATA &
form get_additional_data.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Get additional data' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
loop at i_userexit.
Enhancement data
if i_userexit-type cs 'Enh'.
clear: wa_modsapa.
select single name into wa_modsapa-name from modsap
where member = i_userexit-txt.
check sy-subrc = 0.
i_userexit-modname = wa_modsapa-name.
clear wa_modsapt.
select single modtext into wa_modsapt-modtext from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
i_userexit-modtext = wa_modsapt-modtext.
MOH - enhancement to get the project name
clear w_mod.
select single modactmember modactname modattr~status
modattranam modattradat
into w_mod
from modact
inner join modattr
on modattrname = modactname
where modact~member = wa_modsapa-name
and modact~typ = space.
i_userexit-modattr = w_mod.
MOH - eoe
endif.
BADI data
if i_userexit-type eq 'BADI'.
clear wa_sxs_attr.
select single exit_name into wa_sxs_attr-exit_name from sxs_attr
where exit_name = i_userexit-txt.
if sy-subrc = 0.
i_userexit-modname = i_userexit-txt.
else.
i_userexit-modname = 'Dynamic call'. "#EC NOTEXT
endif.
clear wa_sxs_attrt.
select single text into wa_sxs_attrt-text from sxs_attrt
where exit_name = wa_sxs_attr-exit_name
and sprsl = sy-langu.
i_userexit-modtext = wa_sxs_attrt-text.
endif.
modify i_userexit.
endloop.
get enhancements via program package
clear wa_tadir.
select single devclass into wa_tadir-devclass from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = p_pname.
if sy-subrc = 0.
clear: wa_modsapa, wa_modsapt.
select name from modsapa into wa_modsapa-name
where devclass = wa_tadir-devclass.
select single modtext from modsapt into wa_modsapt-modtext
where name = wa_modsapa-name
and sprsl = sy-langu.
read table i_userexit with key modname = wa_modsapa-name.
if sy-subrc <> 0.
i_userexit-modtext = wa_modsapt-modtext.
i_userexit-type = 'Enhancement'. "#EC NOTEXT
i_userexit-modname = wa_modsapa-name.
i_userexit-txt = 'Determined from program DevClass'."#EC NOTEXT
i_userexit-pname = 'Unknown'. "#EC NOTEXT
append i_userexit.
endif.
endselect.
endif.
Get IDOCs
loop at i_devclass.
endloop.
endform. "GET_ADDITIONAL_DATA
& Form DATA_DISPLAY &
form data_display.
data selection message to sap gui
call function 'SAPGUI_PROGRESS_INDICATOR'
destination 'SAPGUI'
keeping logical unit of work
exporting
text = 'Prepare screen for display' "#EC NOTEXT
exceptions
system_failure
communication_failure
. "#EC *
sort i_userexit by type txt modname.
delete adjacent duplicates from i_userexit comparing txt modname.
format headings
write: 'Enhancements from main program'. "#EC NOTEXT
write: /.
uline.
format color col_heading.
write: / sy-vline,
(12) c_col1, "Enhanmt Type
sy-vline,
(40) c_col2, "Enhancement
sy-vline,
(30) c_col3, "Program/Include
sy-vline,
(20) c_col4, "Enhancement name
sy-vline,
(60) c_col5, "Enhancement description
sy-vline,
(8) c_col6, "Project
sy-vline,
(1) c_col7, "S
sy-vline,
(12) c_col8, "ChangeName
sy-vline,
(10) c_col9, "ChangeDate
sy-vline.
format reset.
uline.
format lines
loop at i_userexit.
set line colour
case i_userexit-type.
when 'Enhancement'.
format color 3 intensified off.
when 'BADI'.
format color 4 intensified off.
when 'BusTrEvent'.
format color 5 intensified off.
when 'Program Exit'.
format color 6 intensified off.
when others.
format reset.
endcase.
write: / sy-vline,
i_userexit-type,
sy-vline,
i_userexit-txt(40),
sy-vline,
i_userexit-pname(30),
sy-vline,
i_userexit-modname(20),
sy-vline,
i_userexit-modtext(60),
sy-vline,
i_userexit-modattr-name,
sy-vline,
i_userexit-modattr-status,
sy-vline,
i_userexit-modattr-anam,
sy-vline,
i_userexit-modattr-adat no-zero,
sy-vline.
hide: i_userexit-type,
i_userexit-txt,
i_userexit-pname,
i_userexit-modname,
i_userexit-modtext.
endloop.
format reset.
uline.
user-exits from development class of function modules
if p_devc = 'X'.
write: /.
write: / 'User-exits from function module development class'."#EC NOTEXT
write: 157''.
uline (90).
write: 157''.
loop at i_devclass.
clear wa_modsapa.
select name from modsapa into wa_modsapa
where devclass = i_devclass-clas.
select single name modtext into corresponding fields of wa_modsapt
from modsapt
where name = wa_modsapa-name
and sprsl = sy-langu.
format color 3 intensified off.
write: / sy-vline,
(12) 'Enhancement',
sy-vline,
wa_modsapa-name,
sy-vline,
wa_modsapt-modtext,
sy-vline.
endselect.
endloop.
uline (90).
format reset.
endif.
describe table i_fmodule lines w_linnum.
write: / c_fmod , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_func = 'X'.
display fuction modules used in program
uline (38).
write: 157''.
loop at i_fmodule.
write: sy-vline,
i_fmodule-name,
sy-vline,
i_fmodule-bapi,
sy-vline.
write: 157''.
endloop.
uline (38).
write: 157''.
endif.
describe table i_submit lines w_linnum.
write: / c_subm , at 35 w_linnum. "#EC NOTEXT
write: 157''.
if p_subm = 'X'.
display submit programs used in program
uline (44).
write: 157''.
loop at i_submit.
write: sy-vline,
i_submit-pname,
sy-vline.
write: 157''.
endloop.
uline (44).
endif.
issue message with number of user-exits displayed
describe table i_userexit lines w_linnum.
message s697(56) with w_linnum.
endform. "DATA_DISPLAY
& User Selection Processing &
at line-selection.
get cursor field w_fsel.
case w_fsel.
when 'I_USEREXIT-MODNAME'.
case i_userexit-type.
when 'Enhancement'.
set parameter id 'MON' field i_userexit-modname.
call transaction 'SMOD' and skip first screen.
when 'BADI'.
check i_userexit-modname ne 'Dynamic call'.
set parameter id 'EXN' field i_userexit-modname.
call transaction 'SE18' and skip first screen.
when 'BusTrEvent'.
submit rfopfi00 with attr_typey_selm = 'A'
with event = i_userexit-modname(8)
via selection-screen
and return.
when others.
endcase.
when 'I_USEREXIT-PNAME'.
check i_userexit-modname ne 'Unknown'.
w_off = 0.
find '/' in i_userexit-pname match offset w_off.
if w_off = 0.
set parameter id 'RID' field i_userexit-pname.
call transaction 'SE38' and skip first screen.
else.
w_off = w_off + 1.
w_prog = i_userexit-pname+w_off.
set parameter id 'RID' field w_prog.
call transaction 'SE38' and skip first screen.
endif.
when others.
endcase.
Feel free to revert back.
--Ragu -
Unable to find any active legal regulations for determination proc. "TEST1"
Hi Guys
This is in regards to a Customs document for a Payment doc
We have just finished the configuration of the Finance integration which will stop blocked partners during the Payment run
Now when we create a Proposal in the Payment run in ECC, the same document gets transferred to GTS, now even though the SPL is active when we check the Log there is a message Unable to find any active legal regulations for determination proc
Upon further investigation of the customs document i found 2 things
1) In the Geography section Country of Departure is populated with US, but the Country of destination is blank, this might be a reason as the Legal regulation checks both the countries and then activate, any idea how i can get the same to populate?
2) If the above population does happen, from which partner type should it come from, as in my customs document only Vendor and Bank is there, in the PO customs document this is being populated properly
Any idea what is wrong here?
Thanks
CarlHi Dave
Thanks for answering again.
I have tried activating it at country level, country/country, country/group, Same result in case of all
As i know now since the Country of Destination is missing, it cannot activate the last two, but the same is also not working at country level.
So is there anyway to maybe have some partner function which can populate the Destination country.
Any other advice will be really helpful..
Thanks
Carl -
Where can I find the activation pin for the comes ...
I have recently bought a 5320 phone and wants to register for comes with music. However, I was not able to find the activation pin. It's stated in the website that it is printed on the leaflet but I simply can't find the 16 character pin. I have already looked at all the leaflets that are inside the package.
Can someone tell me where exactly can I find the activation pin? Thanks!Hi,
This is a very common problem, nearly all the retailers out there are using the fact that Nokia are offering this 'comes with music' service as a unique selling feature. The guy I spoke to in carphone warhouse said that my phone Was compatable with the comes with music scheme and that I would have no problems, once I had registered in downloading.
I had the same advice from O2 and from Orange.
So I went with Carphone warehouse and got the 5230, without confirming that I would receive the voucher from them. My fault I know.
When a rang them after realising I had been cleaverly duped I was told on the phone that carphone warehouse had never taken part in the scheme to give out the vouchers in their compatable handset sales.
Luckely I voice recorded the guy who missold to me as I read on here before makingmy purchase, and have now been offered all my money back and a voucher of £100 to spend in the music store as a form of apology.
I would suggest you contact Nokia themselves. The more reports they receive hopefully they will react. -
Zero suppression is set active for rows & columns - but find empty rows
hi,
In the query properties i set zero suppression active for all rows and columns, but in the workbook, when i execute the report i still find empty rows. i refreshed the query from the workbook, and have done everything, but still i find empty rows.
Can anyone help me in this regard?
thanks,
raniHi,
you found empty rows in WorkBook, what about the Query Output ?
please check the below:
Re: Suppressing result rows when KF values are zero?
Hope this helps you
Regards
ReddY A -
What is Attribute for assigned object in IMG activity?
Hi Experts,
I am adding a new IMG step by changing IMG structure and create a new activity under one existed node.
In the Change IMG activity page, there are 3 tabs-Document, Attribute and Maint. objects for assigned objects.
In Attribute tab, there are attribute ID and name, assigned application components. What are their function? How can I get their value?
Thanks!
Regards,
Yingi got the answ
-
How to find User Exits/ Enhancments/ BADI's for T-code CJ20N
Hi All,
In T-code CJ20N, assume there are two fields A & B. User will input value in A, based on A value I need to fill B field. So I need to find first suitable User Exit/ Enhancment/ BADI.
Kindly help me in this regard. Pls tell me how to find User Exit/ Enhancment/ BADI for a given t-code.
Regards
Jaker.Hi,
Check the following , this might help,
1. CNEX0037
2.CNEX0038
3.CNEX0039
Regards
Kiran Sure -
I needed to restore my phone to an earlier restore point because my notes were deleted after I restored I recieved this message
"We’re sorry, the device you connected may be damaged and cannot be activated for service. We recommend you visit your nearest Apple Store for more information. To find your nearest Apple Store, click here."
I need to get phone running asap abd do not want to go to Apple to talk with Genius.That message will occur when you put in a NON-AT&T sim
just get the sim out and try again -
500px give to me and redeem 24 code but i can't find the code for the activation of adobe cc
500px give to me and redeem 24 code but i can't find the code for the activation of adobe cc
Hi Ntinos,
Normally you just need to go to https://creative.adobe.com/redeem and sign in with your Adobe ID to activate the code. The address you gave to 500px for registration and payment has to match that of your Adobe ID.
Hope that helps,
- Dave -
How to find table structure for IM_ITEM in badi ME_PROCESS_REQ_CUST
Dear Experts,
How i can find table structure for IM_ITEM in badi ME_PROCESS_REQ_CUST.Hi Ganesh,
double click the method IF_EX_ME_PROCESS_REQ_CUST~PROCESS_ITEM
double click TYPE REF TO IF_PURCHASE_REQUISITION_ITEM
select get_data and click parameters
here you can find the structure mereq_item.
This is the process to find the structure....:-) -
How do I find the activation code for the device
how do I find the activation code for the device for use with netflix
there isnt an application code for netflix, you enter your email adress and passowrd and it activates netflix automatically. hope this helps
-
How do i find the activation code for Netflix
how do i find the activation code for Netflix
If you are trying to set up a new device, the device should display the activation code.
-
Where do i find the activation code for a trial download
where do I find the activation code for a trial download
There is no activation code or serial number for trial. You can download, install and use the application for 30 days after which you need to license it.
-
how do i find the activation code fot he apple tv? I am trying to connect to netflix.
Welcome to the Apple Community.
You need to create an account on your mac/PC and then use your ID and passcode to log in on the Apple TV. -
RE: Short dump after activation of BADI
Hi all,
We are getting short dumps in all the transactions after activating the BADI 'BADI_LAYER'
We are not able to execute any of the transactions.
The details of runtimeerror
Runtime Errors RAISE_EXCEPTION
Date and Time 30.07.2007 09:58:06
Short text
Exception condition "SINGLE_EXIT_MULTIPLY_ACTIVE" raised.
What happened?
The current ABAP/4 program encountered an unexpected
situation.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
A RAISE statement in the program "CL_EXITHANDLER================CP" raised the
exception
condition "SINGLE_EXIT_MULTIPLY_ACTIVE".
Since the exception was not intercepted by a superior
program, processing was terminated.
Short description of exception condition:
For detailed documentation of the exception condition, use
Transaction SE37 (Function Library). You can take the called
function module from the display of active calls.
How to correct the error
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"RAISE_EXCEPTION" " "
"CL_EXITHANDLER================CP" or "CL_EXITHANDLER================CM001"
"GET_INSTANCE"
or
"CL_EXITHANDLER================CP" "SINGLE_EXIT_MULTIPLY_ACTIVE"
or
"SAPMF05A " "SINGLE_EXIT_MULTIPLY_ACTIVE"
If you cannot solve the problem yourself and want to send an error
notification to SAP, include the following information:
1. The description of the current problem (short dump)
To save the description, choose "System->List->Save->Local File
(Unconverted)".
2. Corresponding system log
Display the system log by calling transaction SM21.
Restrict the time interval to 10 minutes before and five minutes
after the short dump. Then choose "System->List->Save->Local File
(Unconverted)".
3. If the problem occurs in a problem of your own or a modified SAP
program: The source code of the program
In the editor, choose "Utilities->More
Utilities->Upload/Download->Download".
4. Details about the conditions under which the error occurred or which
actions and input led to the error.
System environment
SAP-Release 700
Application server... "sapdevp"
Network address...... "192.168.0.205"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 80686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "SAPDEVP"
Database type..... "ORACLE"
Database name..... "TDV"
Database user ID.. "SAPSR4"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 23:08:16"
create on........ "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version. "OCI_10103_SHARE "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 700
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory consumption
Roll.... 8176
EM...... 6271344
Heap.... 0
Page.... 57344
MM Used. 1728072
MM Free. 360856
User and Transaction
Client.............. 400
User................ "FIUSER01"
Language key........ "E"
Transaction......... "FB50 "
Program............. "CL_EXITHANDLER================CP"
Screen.............. "SAPMF05A 1010"
Screen line......... 7
Information on where terminated
Termination occurred in the ABAP program "CL_EXITHANDLER================CP" -
in "GET_INSTANCE".
The main program was "SAPMF05A ".
In the source code you have the termination point in line 145
of the (Include) program "CL_EXITHANDLER================CM001".
Source Code Extract
Line
SourceCde
115
SELECT SINGLE is_impl FROM badiisimpled INTO is_impl
116
WHERE badi_name = mig_badi_name.
117
IF sy-subrc NE 0.
118
not yet filled
119
is_impl = cl_enh_badi_tool_utilities=>update_badiisimpled( mig_badi_name ).
120
ENDIF.
121
122
IF is_impl = 'X'.
123
ok at least one implementation found
124
act_imp_existing = 'X'.
125
ENDIF.
126
127
ENDIF.
128
ENDIF.
129
ELSE.
130
131
check how many implementations exist for an exit
132
CALL METHOD cl_badi_flt_data_trans_and_db=>act_imps_per_flt_val
133
EXPORTING
134
runtime_call = seex_true
135
exit_name = exit_name
136
EXCEPTIONS
137
singular_exit_multiply_active = 1
138
no_active_implementation = 2
139
only_default_implementation = 3
140
OTHERS = 4.
141
CASE sy-subrc.
142
WHEN 0.
143
act_imp_existing = seex_true.
144
WHEN 1.
>>>>>
RAISE single_exit_multiply_active.
146
WHEN 2.
147
act_imp_existing = seex_false.
148
WHEN 3.
149
act_imp_existing = seex_false.
150
def_impl = seex_true.
151
WHEN 4.
152
RAISE data_incons_in_exit_managem.
153
ENDCASE.
154
155
new parameter considered for performance purposes
156
IF act_imp_existing = seex_true OR
157
def_impl = seex_true OR
158
null_instance_accepted = seex_false.
159
160
ok, then do your job
161
CREATE OBJECT exit TYPE (abs_type_classname).
162
CATCH SYSTEM-EXCEPTIONS move_cast_error = 1.
163
instance ?= exit.
164
ENDCATCH.
Contents of system fields
Name
Val.
SY-SUBRC
1
SY-INDEX
0
SY-TABIX
0
SY-DBCNT
2
SY-FDPOS
1
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
FSKB
SY-UCOMM
SY-TITLE
Enter G/L Account Document: Company Code TJ01
SY-MSGTY
S
SY-MSGID
B!
SY-MSGNO
015
SY-MSGV1
00001140
SY-MSGV2
SY-MSGV3
SY-MSGV4
SY-MODNO
0
SY-DATUM
20070730
SY-UZEIT
095806
SY-XPROG
SY-XFORM
Active Calls/Events
No. Ty. Program Include Line
Name
5 METHOD CL_EXITHANDLER================CP CL_EXITHANDLER================CM001 145
CL_EXITHANDLER=>GET_INSTANCE
4 METHOD CL_EXIT_MASTER================CP CL_EXIT_MASTER================CM004 2
CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
3 METHOD CL_EX_FI_HEADER_SUB_1300======CP CL_EX_FI_HEADER_SUB_1300======CM003 53
CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
2 FORM SAPMF05A MF05AF00_D0100_PRE_APPL_SUB_2 50
D0100_PRE_APPL_SUB_PBO
1 MODULE (PBO) SAPMF05A MF05AO00_D0100_PRE_APPL_SUB 10
D0100_PRE_APPL_SUB
Chosen variables
Name
Val.
No. 5 Ty. METHOD
Name CL_EXITHANDLER=>GET_INSTANCE
EXIT_NAME
BADI_LAYER
44445445452222222222
2149FC19520000000000
00000000000000000000
00000000000000000000
NULL_INSTANCE_ACCEPTED
2
0
0
0
ACT_IMP_EXISTING
2
0
0
0
INSTANCE
F0000000
F0000000
%_SPACE
2
0
0
0
RSJOBINFO
00000000000000 ##
2222222222222222222222222222222233333333333333222222222222222222222222222222222200
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000
%_DUMMY$$
2222
0000
0000
0000
SEEX_TRUE
X
5
8
0
0
SYST-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
<%_TABLE_BADIISIMPLED>
SY-REPID
CL_EXITHANDLER================CP
4454545444444533333333333333334522222222
3CF589481E4C52DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
SY-XPROG
2222222222222222222222222222222222222222
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
No. 4 Ty. METHOD
Name CL_EXIT_MASTER=>CLASS_CONSTRUCTOR
%_SPACE
2
0
0
0
SYST-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SY-REPID
CL_EXIT_MASTER================CP
4454545544554533333333333333334522222222
3CF5894FD13452DDDDDDDDDDDDDDDD3000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
CL_EXIT_MASTER=>LAYER_EXIT
F0000000
F0000000
%_DUMMY$$
2222
0000
0000
0000
No. 3 Ty. METHOD
Name CL_EX_FI_HEADER_SUB_1300=>IF_EX_FI_HEADER_SUB_1300~PUT_DATA_TO_SCREEN_PBO
IM_BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
IM_X_NO_INPUT
2
0
0
0
FLT_VAL
IN
44
9E
00
00
<EXIT_OBJ>-IMP_CLASS
<FLT_CACHE_LINE>-OBJ
|
| F0000000 |
| F0000000 |
| %_DUMMY$$ |
| |
| 2222 |
| 0000 |
| 0000 |
| 0000 |
| ME->INSTANCE_BADI_TABLE |
| Table[initial] |
| <EXIT_OBJ> |
| ??? |
| ?????? |
| ?????? |
| <%_L001> |
| ??? |
| ?????? |
| ?????? |
| RSJOBINFO |
| 00000000000000 ## |
| 2222222222222222222222222222222233333333333333222222222222222222222222222222222200 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000000000000000000000000000000000000000000000 |
| SY-REPID |
| CL_EX_FI_HEADER_SUB_1300======CP |
| 4454554454444455554533333333334522222222 |
| 3CF58F69F851452F352F1300DDDDDD3000000000 |
| 0000000000000000000000000000000000000000 |
| 0000000000000000000000000000000000000000 |
| <%_L001>-METHOD_NAME |
| ??? |
| ?????? |
| ?????? |
| EXIT_OBJ_TAB |
| Table[initial] |
| SY-SUBRC |
| 1 |
| 0000 |
| 1000 |
| ME |
|
F0000000
C0003000
SXRT_TRUE
X
5
8
0
0
No. 2 Ty. FORM
Name D0100_PRE_APPL_SUB_PBO
*BSEG-STBUK
2222
0000
0000
0000
%_DUMMY$$
2222
0000
0000
0000
SY-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
SYST-REPID
SAPMF05A
5454433422222222222222222222222222222222
310D605100000000000000000000000000000000
0000000000000000000000000000000000000000
0000000000000000000000000000000000000000
KDBTAB-DMBTR
0.0.0.0.0.0.1.
0000000
000000C
%_SPACE
2
0
0
0
KDPTAB-BELNR
2222222222
0000000000
0000000000
0000000000
KDPTAB-GJAHR
0000
3333
0000
0000
0000
KDPTAB-BUZEI
000
333
000
000
000
KDBTAB-XRUND
2
0
0
0
SPACE
2
0
0
0
F05ACTRL
2
0
0
0
SYST
######################################ð#######################################~######### C####
00000000000000000000000000000000000000F0000000000000000000000000000000000000107000000050240000
000000200000000000002010100010000000000000000010400000000000000000000000000080E000200080030100
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000040000000
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000D000000C
BSED
0000000# ############## 0000000000000000
2222222222222222233333330200000000000000223333333333333333222222222222222222222222222222222222
00000000000000000000000000000C000000C000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000C0000000C000000C000000000000000000000000000000000000000000000000000000
SY-SUBRC
1
0000
1000
G_APPL_SUB_ACTIVE
X
5
8
0
0
CHAR_X
X
5
8
0
0
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
BKPF-BUKRS
TJ01
5433
4A01
0000
0000
BKPF
TJ01 2007SA00000000200707300400000000000000000000000000000000000000
2225433222222222233335433333333333333333333333333333333333333333333333333333333222222222222222
0004A01000000000020073100000000200707300400000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
G_APPL_SUB_DISABLE
2
0
0
0
T005-INTCA
IN
44
9E
00
00
No. 1 Ty. MODULE (PBO)
Name D0100_PRE_APPL_SUB
C_FIELD_DIALOG_ALL
BUTTON_DIALOG_ALL
4555445444444544422222222222222222222222222222222222222222222222222222222222222222222222222222
2544FEF491CF7F1CC00000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Internal notes
The termination was triggered in function "ab_jfune"
of the SAP kernel, in line 2561 of the module
"//bas/700_REL/src/krn/runt/abfunc.c#10".
The internal operation just processed is "FUNE".
Internal mode was started at 20070730095806.
Active Calls in SAP Kernel
Lines of C Stack in Kernel (Structure Differs on Each Platform)
SAP (R) - R/3(TM) Callstack, Version 1.0
Copyright (C) SAP AG. All rights reserved.
Callstack without Exception:
App : disp+work.EXE (pid=4436)
When : 7/30/2007 9:58:6.359
Threads : 2
Computer Name : SAPDEVP
User Name : SAPServiceTDV
Number of Processors: 4
Processor Type: x86 Family 6 Model 15 Stepping 6
Windows Version : 5.2 Current Build: 3790
State Dump for Thread Id 250c
eax=34d52300 ebx=000003f8 ecx=0001ccc0 edx=34d039e0 esi=000003f8 edi=00000000
eip=7c82ed54 esp=053fceb4 ebp=053fcf24 iopl=0 nv up ei ng nz ac po cy
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00200297
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:053fceb4=7c822124
7c82ed5c 8d642400 lea esp,[esp] ss:6627b4c7=00002100
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
053fcf24 77e6ba42 000003f8 0001d4c0 00000000 053fcf5c ntdll!KiFastSystemCallRet
053fcf38 0100b3aa 000003f8 0001d4c0 00000001 7c38b5c8 kernel32!WaitForSingleObject
053fcf5c 0055b4ac 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 disp+work!NTDebugProcess
053fcf60 0055b4e5 7c38b5c8 7c38b5c8 7c38b5c8 01d35ab0 disp+work!NTStack
053fcf7c 0055b519 7c38b5c8 00000000 008536a8 7c38b5c8 disp+work!CTrcStack2
053fcf88 008536a8 7c38b5c8 00000000 005f0059 00300030 disp+work!CTrcStack
053fcfac 008569fa 6d1d037c 0000001b 00000000 01cfc168 disp+work!rabax_CStackSave [abrabax.c (6871)
053fd084 006aaaf4 0134837c 0134835c 00000a01 235f1640 disp+work!ab_rabax
053fd0c0 0067bb56 00000003 34cf5708 00000000 053fd128 disp+work!ab_jfune
053fd128 007af183 00000000 34cf5708 053fd274 34cf8c26 disp+work!ab_extri
053fd13c 00837a37 00000000 34cf7dd6 00596fa0 34cf68b4 disp+work!ab_xevent
053fd148 00596fa0 34cf68b4 000003db 34cf7dd6 00000000 disp+work!ab_dstep
053fd274 00597fa1 34cf5708 34cf5708 053ffd04 00597b13 disp+work!dynpmcal
053fd284 00597b13 34cf5708 34cf5708 00000003 053ffd04 disp+work!dynppbo0
053fd2a0 0056dcf1 34cf5708 0006e768 00000000 0000000c disp+work!dynprctl
053ffd04 00471848 00000013 07de0048 00000001 00494960 disp+work!dynpen00
053ffd14 00494960 0000000c 00000000 00000003 00000002 disp+work!Thdynpen00
053ffee0 00494ee2 00000001 00000000 00000000 00430000 disp+work!TskhLoop
053fff00 00421150 00000000 00000000 7ffd8000 053fff60 disp+work!ThStart
053fff14 00401080 00000003 003f6850 00000001 00000000 disp+work!DpMain
053fff60 011a94a0 00000003 003f6850 003f78f8 01bd5000 disp+work!nlsui_main
053fffc0 77e523e5 00000000 00000000 7ffd8000 88602680 disp+work!wmainCRTStartup
053ffff0 00000000 011a935d 00000000 00905a4d 00000003 kernel32!IsProcessorFeaturePresent
State Dump for Thread Id 27bc
eax=00000001 ebx=00000103 ecx=fffffffe edx=003f01f8 esi=00000000 edi=00000000
eip=7c82ed54 esp=075dfec0 ebp=075dff04 iopl=0 nv up ei pl zr na po nc
cs=001b ss=0023 ds=0023 es=0023 fs=003b gs=0000 efl=00000246
function : KiFastSystemCallRet
7c82ed54 c3 ret
7c82ed55 8da42400000000 lea esp,[esp] ss:075dfec0=7c821514
7c82ed5c 8d642400 lea esp,[esp] ss:6845e4d3=50004500
FramePtr ReturnAd Param#1 Param#2 Param#3 Param#4 Function Name
075dff04 010f7ffc 000006c0 00000000 00000000 003f77d0 ntdll!KiFastSystemCallRet
075dff84 7c349565 00000000 00000000 00000000 0587ff08 disp+work!SigIMsgFunc
075dffb8 77e6608b 0587ff08 00000000 00000000 0587ff08 MSVCR71!endthreadex
075dffec 00000000 7c3494f6 0587ff08 00000000 00000000 kernel32!GetModuleFileNameA
List of ABAP programs affected
Index
Typ
Program
Group
Date
Time
Size
Lang.
0
Prg
SAPMF05A
0
22.05.2007
11:37:49
1563648
E
1
Prg
SAPMSSYD
0
10.01.2007
12:33:28
21504
E
2
Prg
SAPFSYSCALLS
0
09.09.2004
14:18:32
8192
E
3
Typ
TFDIR
0
13.02.2005
17:31:57
3072
4
Prg
SAPLAPAR_EBPP_SERVICES
4
03.01.2007
11:23:55
114688
E
5
Typ
T042ZEBPP
0
08.01.2002
14:42:24
2048
6
Typ
T020
0
24.02.1999
03:17:19
3072
7
Typ
RFOPT2
0
11.12.2003
15:00:17
5120
8
Prg
SAPFF001
0
22.05.2007
11:37:49
195584
E
9
Typ
SWOTOBJID
0
04.05.1995
15:20:52
2048
10
Prg
SAPLSWOR
10
10.01.2007
12:33:34
292864
E
11
Typ
TFBUF
0
30.11.1998
22:08:34
3072
12
Typ
ACC_KONTEXT
0
08.01.2003
17:30:26
3072
13
Typ
BKPF
0
13.03.2006
11:01:29
18432
14
Prg
SAPLFACSCORE
14
01.12.2006
22:00:12
13312
E
15
Typ
T001
0
25.08.2005
22:03:13
13312
16
Prg
SAPLACHD
16
03.01.2007
11:23:55
51200
E
17
Prg
SAPFSPOR
0
09.09.2004
14:18:32
15360
E
18
Prg
SAPLSCNT
18
18.02.2005
14:16:06
30720
E
19
Typ
DYCBOX
0
20.08.1998
11:16:53
3072
20
Prg
SAPLSVSM
20
18.02.2005
14:16:06
27648
E
21
Prg
SAPLSGUI
21
10.01.2007
12:33:33
82944
E
22
Prg
SAPLSTTM
22
05.07.2005
13:10:18
69632
E
23
Prg
SAPLSBDC
23
05.07.2005
13:10:18
44032
E
24
Prg
CL_DATAPROVIDER===============CP
24
28.02.2005
21:00:46
49152
E
25
Prg
%_CCNTL
24
18.02.2005
14:15:08
15360
E
26
Typ
OBJ_RECORD
0
14.02.1998
08:30:43
2048
27
Prg
SAPLSTUP
27
08.03.2005
19:04:31
73728
E
28
Prg
SAPLCNDP
28
01.12.2006
22:04:33
193536
E
29
Prg
SAPSHDTV
18
05.01.2005
16:26:16
33792
E
30
Typ
SHDSTU
0
14.12.1998
23:15:34
2048
31
Typ
SHDSTCIU
0
14.12.1998
23:15:34
2048
32
Prg
SAPFGUICNTL
0
18.02.2005
14:15:08
24576
E
33
Prg
SAPLOLEA
33
05.07.2005
13:10:18
96256
E
34
Prg
SAPLSFES
34
10.01.2007
13:26:20
256000
E
35
Prg
SAPLSPLUGIN
35
09.09.2004
14:18:36
8192
E
36
Typ
ARFCRDATA
0
13.02.2005
18:20:24
7168
37
Prg
SAPLGRFC
37
13.02.2005
18:20:25
16384
E
38
Typ
SWCBCONT
0
15.11.2000
17:55:11
3072
39
Typ
OLE_VERBS
0
04.04.1995
16:02:20
2048
40
Typ
OLE_PA
0
04.04.1995
16:02:19
2048
41
Typ
ACGL_HEAD
0
11.12.2003
14:59:21
8192
42
Typ
RF05A
0
11.04.2005
11:50:21
38912
43
Typ
TCURC
0
01.12.1999
12:14:40
2048
44
Prg
SAPLFAGL_ACTIVATION_SERVICES
44
30.04.2007
17:00:55
45056
E
45
Prg
SAPLSTR9
45
09.05.2006
10:39:47
39936
E
46
Prg
CONTEXT_X_TR_SYS_PARAMS
45
09.05.2006
10:39:47
40960
E
47
Typ
TCONT
0
09.09.2004
14:18:43
2048
48
Typ
CONTEXTB
0
09.09.2004
14:15:52
6144
49
Typ
FAGL_ACTIVEC
0
19.08.2004
16:55:10
5120
50
Typ
FAGL_CHECK_SETUP
0
11.12.2003
15:01:05
2048
51
Prg
SAPLSHD0
51
03.01.2007
06:52:22
232448
E
52
Prg
SAPLBFFM3
52
10.01.2007
13:15:21
169984
E
53
Typ
OFIWA
0
15.04.1998
00:11:05
2048
54
Typ
FTEXTS
0
20.08.2001
12:13:26
3072
55
Prg
SAPLITSR
55
10.01.2007
14:23:52
107520
E
56
Typ
FMRFC
0
13.08.1997
12:32:59
2048
57
Typ
TBE01
0
20.01.2003
16:41:38
2048
58
Typ
TBE31
0
03.09.1997
03:01:11
2048
59
Typ
TBE31
0
03.09.1997
03:01:11
2048
60
Typ
TBE11
0
03.09.1997
03:01:06
2048
61
Prg
CONTEXT_X_SP_INFO
55Hello Sowmya
The BAdI BADI_LAYER is not defined for <b>Multiple-Use</b> (see checkbox on tabstrip <i>Attributes</i>).
Apparently you have created <i>several </i>implementation of this BAdI and activated <i>several </i>(at least 2) of these implementations.
If you inactivate all except a single implementation the BAdI (and all transactions using this BAdI) should work again.
Regards
Uwe
Maybe you are looking for
-
Is Adobe force you to buy a update by stopping your old one? It doesn't work anymore.
I do have version 12... whole time no troubles and from one day on the other it does not work anymore. Do I MUST buy and new one to workout further???
-
Hi, I have been getting a number of core dumps from an eclipse RCP based client java application. Its running on the following solaris box: SunOS 5.10 Generic_118833-36 sun4u sparc SUNW,Sun-Fire-V240 with following java configuration: java version "1
-
Can't access HD, please help!!
I know this is more for peripherals (and I posted there too), but I am desperate, and working under a deadline! Hi everyone, I have a 120 GB Western Digital external Hard Drive. I've only had it about two years, and until now haven't had any problems
-
How to create a field group.
Hi all, Can anyone please explain how to create a field group for few fields? My requirement is i want to Create a specific fieldgroup for maintenance of the fields for the contacts TAB on the customer master KNVK-NAME1 KNVK-NAMEV KNVK-ABTNR KNVK-PAF
-
have libreto 100 with system crash using windows 7. can't find USB with recory data. recovery options using F12 not working get copy error. tried to order recovery media yet serial number not being accepted. looked on website for file to download als