Finding Inactive Transformation

Hi Guys.
Is there any programe to find out all the inactive transformations in BI 7.0 system.
Thanks in advance
peter b

Hi,
Goto SE11 there check the following table RSUPDINFO.
Here Using Object status field u can identify the active update rules.
Hope it will solve ur problem.......
Best Regards,
SG

Similar Messages

Active vs. Inactive Transformations

HI,
Just wondering the reason for inactive transformations (white ribbon)? Why would you have inactive transformations? Do inactive transformations get executed, or only active transformations? Also, I'm seeing an inactive transformation based on a data source that no longer exists. Why would someone keep this as part of the data structure in RSA1?
Thanks,
Kevin

Hello,
Just wondering the reason for inactive transformations (white ribbon)? Why would you have inactive transformations? Do inactive transformations get executed, or only active transformations? Also, I'm seeing an inactive transformation based on a data source that no longer exists. Why would someone keep this as part of the data structure in RSA1?
1. Inactive Transformations:
     There are many reasons, to have inactive transformations -
     If the target infoProvider (either DSO, InfoCube or master data attr , text) has been changed, meaning if you add any new field to any data target and activate the target. This will result in inactivation of transformation and also DTP will be inactive.
2. I'm seeing an inactive transformation based on a data source that no longer exists?
     This should not happen, when you delete the source (in your case the DataSource) then the transformation is automatically removed.. since there is no connection between the two (source and target). However, I shall advice you to verify the DataSource and check if it is still in use. If not, then you can delete the transformation and also DTP associated with the same.
Hope this helps.

Reg: Inactive transformations

Hi All,
Some times while transporting objects into Productions, transformations getting inactive.
In that case to activate transformations, we will retransport inactive transformations or we will open the Client ( very rare cases) and makes the inactive transformation to active in the system.
For this shall we write a progarm to make inactive transformation to active version in production.
Can you please provide ideas how to start this.
Thx,
Raj

Hi reddy,
i think might be the order of objects are not moving in sequence. while moving objects please make sure the order and this can be avoided.
transport sequence:
Info objects, data targets/info providers, data sources , transformations,infopackages etc
mahesh

Inactive transformations

Hi
We have few inactive transformations in prod due to some other reasons.Is there any way where we can activate them through a program or function module in production itself without client open.
Thanks
Pratap.

hi,
i think there is no tool to activate transformations.
Better activate them in Dev and transport into Production.
Hope this helps....
Reg
Pra

Change of Infoarea causes inactive transformations & DTPs!?

Hi all,
what I'm trying to do is simple to move one DSO object from one InfoArea to another one. The result is that I do get inactive transformations and DTPs from and to this DSO object in the following system!
Is this a system bug? Did anybody also encounter this problem? (I guess I once had this issue with another customer and we opened up an OSS message at SAP but it's some time ago and I'm not anymore aware of what the result has been...SAP OSS doesnt provide any notes so far...)
I'm happy to receive your comments,
Best regards,
bivision

what I'm trying to do is simple to move one DSO object from one InfoArea to another one. The result is that I do get inactive transformations and DTPs from and to this DSO object in the following system!
What do u mean by in the following system ? After moving DSO to another infoarea, if u transport that DSO alone, then the related transformations and DTPs become inactive. Its quite common.
U should collect related transformations and DTP along with DSO/Cube.
Moving ODS from 1 AC to another AC ?
Edited by: Mr. V on Feb 4, 2010 4:48 PM

Inactive Transformations and DataSources in Production System.

Hi Experts
We are working on BI 7.0 engine within Solution Manager.
We had some issues with DataSources initially while transporting BI Objects from Devp to Prod. We logged it into OSS and followed their procedure to redo the transports.
In the process, the issue was resolved but 2 New Transformations are created one for each Data Model (since I have only 2 InfoCubes) automatically and is the working model now.
Actual Transformations from Devp became Inactive in Prod and also there are 2 Inactive DataSources which are also from Devp. 2 New DataSources are again from Devp.
When I tried to Delete these unwanted Objects from Prod (I asked the Basis to Open Prod for me though this is not the best practice), it is asking for a Request ID. Also, since the Project has Gone Live already, I am scared if I might disturb the Production System.
Kindly, advise what best could and needs to be done.
Thanks,
Chandu

Initially, we implemented BI-HR module with standard content, which 3.x content (transfer / update rules)... in parallel we also did transformations & DTPs (BI 7.0 model).
Since, client wasn't sure with conversation of transfer rules (has lots of routines) to transformations & DTPs . So we transported both the models to prod sys... We created daily load process chains with transformations & DTPs... The actual plan was, if PC loads fails, then to go for manual loads of 3.x model...Fortunately 7.0 models was successful...
Then one month later, we deleted those transfer / update rules and 3.x datasources from prod sys, on the weekend (process chains runs only week days) without any issues...
We captured those deletion requests and deleted them from SE09 by unlocking them in SE03.

Finding Inactive users in 30 minutes.

I use this technique to find iplanet 5.x inactive users.
NOTE: In each mailbox root there is a file store.idx which get update everytime a new message recieved.
find /your/path/to/store/partition/primary/=user -mtime +45 -name store.idx -type f > inactive
this will put all inatcive mailboxes paths which are inactive from last 45 days in a new file "inactive"
the result will similer to
/your/path/to/store/partition/primary/=user/57/21/=aliejaz1/store.idx
then i use these commands to remove useless lines which refer to Sent, Draft and Trash folders.
grep -v Sent inactive > SentRemoved
grep -v Draft SentRemoved > DraftRemoved
grep -v Trash DraftRemoved > TrashRemoved
grep -v + TrashRemoved > CustomFoldersRemoved
Then I also manualy remove all those lines which refer to remaining Custom Folders.
Then by using Find and Replace I replace /your/path/to/store/partition/primary/=user/ with space.
Now it becomes like 57/21/=aliejaz1/store.idx
then I also replace store.idx with space and result become like 57/21/=aliejaz1
Now I replace = with comma i-e , and results become 57/21/,aliejaz1
then I use Excel and open final file as csv.
It will paste 57/21/ in first column and aliejaz1 in second column.
Delete the whole first column.
Now the excel file only contains inactive userids.
That way I found my inactive users.
Good Luck.
Note that if a user still recieving email or spam then it cannot be find this way but there is a chance that his mailbox 100% filled along time ago due to inactivity
I found 90% inactive users by using this mechanism.
For remaining else users check your logs.

Hi,
I would highly recommend against other customers using this approach for a few reasons:
1. A 'find' across the entire store can impact the inode-cache and overall disk performance substantially. A better approach would be to parse the "last msg date" out of the output of "./mboxutil -l" or even "./mboxutil -lp user/%/INBOX" if you just cared about the INBOX. This will cater for users who haven't had a new email for 45 days in their INBOX.
2. Doesn't cater for the case where a user is forwarding their email; the mailbox/account is 'active' just that the contents may not have changed.
3. Doesn't cater for accounts that haven't received new email in 45 days but the user is still reading the old emails - reading an email only updates the store.usr file, the store.idx is only changed if the email is deleted/expunged.
4. Doesn't cater for accounts that are used as 'public shared folders' where emails may only be delivered to very occasionally and not deleted.
In MS6.3 there is another mechanism to monitor when a customer last accessed their account; the ./imsconnutil command e.g.
# ./imsconnutil -a -u shjorth
UID IMAP last access HTTP last access POP last access
===================================================================================================
shjorth 07/Nov/2007:11:42:57 ----NOT-RECORDED---- ----NOT-RECORDED----Given that iMS5.2 is now in limited support you should be upgrading to MS6.3 anyway.
Regards,
Shane.

Inactive Transformations and DSO

Dear All,
   After recent system patching ,i see lot of Transformations and DSO's gone inactive ,this is weird.
Could anyone tell is there any standard program to activate inactive DSO's.
Thanks in Advance
con

Hi Diogo,
    Thanks for your immediate response and for the right solution.
   I can activate it now,thanks again.
   Keep in touch .
Regards
Con

How to find inactive users

Dear All
We want to create a report so that we can find out who are no more employees of our organization.
The purpose is to remove thier usernames from the shared folders.
Is there any way to find out inactive users so that we can go ahead and create an ibot to monitor it on timely basis?
Your help is much appreciated.
Regds
Mano

DS Command is going to be your friend. Here are some exmaples
http://social.technet.microsoft.com/wiki/contents/articles/3537.active-directory-active-directory-domain-services-ad-ds-commands-and-scripts.aspx
User DSQUERY USER instead or COMPUTER
http://portal.sivarajan.com/2010/03/delete-stale-or-inactive-computer.html
Santhosh Sivarajan | Houston, TX
Windows 2012 Book - Migrating from 2008 to Windows Server 2012
http://www.sivarajan.com/
This post is provided ASIS with no warran

To find inactive vendors

Hello Pals,
I want to find vendors who are inactive from past 5 years,Hau to find is there any standard report or we have to develop a z-report.If at all yes please give me some logic.

Hi,
You should develop Z report instead. The logic is quite simple - get the reporting date (or any other date which is chosen by end users at the initial run of this report) as the reference date and feed it to Table EKKO and select each and every vendor ID to find if there is any related record in the last 5 years as from this reference date for that vendor. If not, then report that particular vendor. If yes, then continue searching with another vendor ID till complete.
Cheers,
HT

How to find inactive objects in transport?

I have a transport with alot of objects. I do not want to go into each one to check active status. How can I see the status of the objects in a list linked to that transport or simply check which ones are inactive?

hi JJ,
Goto SE01, give in your request number -> display -> Request/Check -> Complete Check.
I believe this will list you all inactive objects.
<REMOVED BY MODERATOR>
Thanks,
VV
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 3:38 PM

Inactive transformations and DTPs after running BDLS

Hi Experts
I ran the BDLS job, Restored , Activated and Replicated the S.S.
Some of my transformations and DTPs got inactivated . Does any body have any clue of why this happened.
My observations was when i restored it gave an error message " Error 2 in RFC_VERIFY_DESTINATION " although the S.S check says OK and i am able to do loads and during replication process of S.S it was saying " Function module /SDF/AL_MAP_TRANSID_LOGH does not exist." I am not sure if the above errors/observations have any link to some of Transformations and DTPs getting inactivated while the rest of DTPs are active.
Please advice
Thanks
PK

Prabu,
have you solved this issue?
I am also faceing same issue after BDLS - source system change to BIQ, All DTP's are still assined to OLD-Logical system.
Please let us know how you solved it.
Appreciate your response
Shashi
Update:
Note# 1142908 fixed my issue..
Shashi
Edited by: Shashi on Sep 10, 2008 7:22 PM

Transformation Transports inactive

Hi All,
I am transporting some Transformations using Transport Connection and selecting only necessary objects. The first import fails with RC 8 and the following:
Unknown error from the Transport Organizer
Error while activating transformation
Error when activating Transformation 0FI5WAZTHGV66TREPIY6ABUQIKF8028S
When I re-import the request, it completes with a RC 0, but the Transformations are left with 'Active version does not exist' ie inactive.
We've applied SP8.
Any help greatly appreciated.

Hi ,
We also faced the same problem. Delete the Inactive transformation in the target system and move the new request(only transformation )again.
Regards
Josu

Is there any other transform (except FFT) to find out harmonics in the waveform?

Dear all,
I am doing a project on finding other transform (except FFT) to find out harmonics in the waveform. I hope someone can tell me the methods. I have found a lot of time on internet and got no result. Thanks.
Victor

Hello Victor,
If perhaps you are working with rotating machines where the frequency of an "n times per revolution" event is dependent upon the speed of the machine, you may want to look at Order Analysis.
Events that occur a given number of times per revolution occur at the same position each revolution regardless of the rotational speed. However, the frequency at which they occur is directly related to the rotational speed. Order Analysis removes this speed dependency by transforming the phenomena from the time-based domain into a position-based domain.
In the position-based domain, the recurring events are displayed as a the "number of times the event occurs per revolution" instead of the "number of times the event occurs per second" (i.e. frequency). At least this is my interpretation of it based on my experience.
Best Regards,
Chris

How to find out inactive objects in sap

Hi experts,
How to find inactive programs in sap
as well as function modules ,
say simply how to find inactive objects?
is there any table in sap which wil holds inactive objects or any program or any transaction?
thanks advance
sailu

hi,
check this thread,
Re: table to check status(active or inactive) of objects?
In the above thread discussion various tables and the field having the status is mentioned.
So u can check those tables.
кu03B1ятu03B9к

Finding Inactive Transformation

Similar Messages

Maybe you are looking for