Finding InfoObject for DS Fields

hello friends
I have tried to map the DS fields to InfoObjects in RSOSFIELDMAP table, but i am unable to find the InfoObject mapping for the following fields
MB_GRUND, BMSCH, USE04, USR04, VGW03. these fields are present in the standard DS for PP.        
How do i find the relevant info objects for the above fields?
Do let me know ur comments
Regards
Rohit

Hi,
i Checked above fields... not aviable in this datasorce...
Display the data source and find the Extract Structure name (starts with MCMC04P_0MAT). Go to SE11 and append the structure and add the fields that you want to add there. Check and activate and the new fields will be available now
or..
otherwise..
Go to enhancement... in Lo enhancement
give me ur id... i will send document..
Hope this help... assign points...
Regards,
raj
Message was edited by:
        gangaraju mullapudi

Similar Messages

  • Finding InfoObjects for DS Fields

    hello friends
    I have tried to map the DS fields to InfoObjects in RSOSFIELDMAP table, but i am unable to find the InfoObject mapping for the following fields
    MB_GRUND, BMSCH, USE04, USR04, VGW03. these fields are present in the standard DS for PP.
    How do i find the relevant info objects for the above fields?
    Do let me know ur comments
    Regards
    Rohit

    Hi,
    You can also search in <b>RSOSFIELDMAPSH</b>.
    I got InfoObjects for two fields from this table.
    USR04     0ME_USR5
    USE04     0ME_USR5UNT
    Regards,
    Suman

  • Using a single master data infoobject for multiple fields

    Hello experts. Today I ran un with the following problem: I am modelling an Infocube and will be receiving a flat file with several fields, of which 3 of them give information about sales representatives.
    For each transaction there are 1-3 sales representatives involved, and this is reflected in the file I am going to be loading. If only one representative is involved, it means that he was in charge of a complete negotiation, and his code will be found in all three fields, if two representatives are involved, it means that one was in charge of one part of the negotiation, while the other was in charge of the rest, and according to what they were in charge, their code will appear in one or two of the fields. If three representatives are involved, each one's code will appear on the field corresponding to the part of the negotiation they were in charge of handling.
    I already have the sales representative's codes as master data, but I was wondering how I can have those three fields map into the same InfoObject, if that is possible at all. Maybe in the transformation I map them to the same object? Also, what happens when you create the Data Source? As far as I know, each field in the Data Source must be unique, which makes it impossible to use my ZSALESREP InfoObject for the three fields, at least at Data Source level. What can I do in this case?

    Hi  Pedro Olvera,
    You need 3 infoobjects in datasouce to load 3 different fields.
    If you want load to a single infoobject, you can map accordingly in transformation, bult last field overwrites previous one.
    Its better to maintain 3 fields in cube. Create 2 more sales Reps(ZSALESREP1 & ZSALESREP2) with Reference to ZSALESREP then you no need to maintain master data for ZSALESREP1 & ZSALESREP2.
    Use these 3 fields for modeling.
    Hope it Helps
    Srini
    [Dont forget to close the call by assigning poings.... - Food for Points: Make a Difference through Community Contribution!|https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/007928c5-c4ef-2a10-d9a3-8109ae621a82]

  • Infoobject for ASTKZ field

    Hi experts,
    I have added the fiels ASTKZ (Identifier for statistical order) on IS 0COORDER_ATTR.
    I Have to assing it a InfoObject but i cannot find an standard one. Is there any one standard I can use without problems or is it better to create a Z one?
    Thanks!!

    Hi
    Check the table RSOSFIELDMAP with field name ASTKZ. if you find any standard info object, you can use that.
    If you unable to find any thing, you can go with creating Z object as per your requirement.
    Regards,
    Venkatesh

  • Finding sum for time field in alv

    hi gurus.,
              i need to find total hours.. i am using field of data type 'TIMS' ... i converted the value to decimal in ALV and founfd total hours .. i need the total hours in Time format .. how can i achieve this in alv .. its very urgent ...
    thanks&regards.,
    S.Sivakumar

    Hi Shivakumar,
    I suggest you not to convert TIMS to Decimal
    because it won't give you correct result..
    Eg...
    Time1 = '11:56:32'
    Time2 = '11:50:10'        
    now add these two times...
    u will get the sum of these as 23:06:42
    but in real life... you want the result as 23:46:42
    So the better way for getting accurate result is to convert this
    HH:MM:SS to Seconds
    and then sum these seconds
    then again convert it to HH:MM:SS
    1 hr = 3600 sec
    1 min = 60 sec
    Hope it will solve your problem...
    Reward points if useful...
    Thanks & Regards
    ilesh 24x7

  • InfoObject  for Timestamp field??

    Hi Guru's,
                   I'm creating a view for a generic datasource which will feed a DSO. The table I'm extracting data from has a timestamp field. I need help to find out which I/O should I use to map this field in BI. Thanks a lot.

    Hi Akash,
    We resolved this problem by creating a generic datasource and populating it via a simple function module.
    Regards,
    Payal.

  • How to find table for structure field ???

    Hi..
    i need your expert help on this.
    i am working on printing of terms of payment description. here there are explanation fields. it is coming from structure R052. and field name is TXT 02. here as per my understanding structure is coming from multiple tables so how i can find that from which table this field is coming??
    thanks
    h shah

    Dear,
    Well I cant say this is the solution for your issue, but have a look.
    http://it.toolbox.com/wiki/index.php/Find_data_in_your_SAP_system_and_know_which_tables_do_what
    DD02L - table properties
    DD02T - table texts
    DD03L - field properties
    DD03T - field texts
    How to find data related to a structure? With GREAT difficulty, but here are some ways (which will NOT work sometimes) to find specific fields if you know the structure's fieldname.
    1) First, goto SE11, and enter your structure name. Goto the field that holds your data, and double-click on the element name. Once inside the element, do a where-used list for that element, searching tables only. Then go into each table, and see if you can find the one holding your data. There may sometimes be a huge number of tables displayed, but a lot of them will be empty.
    2) Get the name of the program behind your transaction, goto SE80, and enter the program name. 99% of the time it will be part of a module-pool and bring up the pool. Goto the dictionary structures, and search each table there for the one holding your data.
    3) Open a new session with transaction ST05, select SQL Trace, click on the Trace On button, and go back to your transaction (while leaving the session with ST05 open). Submit your transaction, and go back to the ST05 session. Click on the Trace Off button, then select the List Trace button. Continue with standard selections, and a BASIC TRACE LIST will appear. search thru the tables displayed under ObjectName.
    and have a look at below.
    You do know any transaction in which (related) data is used: 1) start the transaction 2) position the cursor on the field you want to have info about 3) press F1, then F9 4) now you see the technical information of the data element, such as table name and field name. 5) if the table mentioned is what you're looking for, you're done. It is also possible that the data element is in a structure and not in a table. Now you can either analyze the structure via trx SE11, or you can double click on the 'data element' field. In the next screen, use the 'Where used' button to find the tables in which this data element is used.
    Additional tip: if you have found the table name, you can use trx SE36 to see the relationships of this table to other tables. You can use these relationships when defining queries, designing custom ABAP programs, etc. If you're lucky, one or more standard SAP logical database exist which contain the table you found in the previous steps. Proceed as follows: 1) start trx SE36 2) use the search help for the logical database name 3) enter the name of the table in the search help 4) press enter and, if you're lucky, you'll see a list of logical databases. Select one, press enter, select the radio button 'Structure' and press the view button. Now you'll see how this table is related to other tables.
    And finally, I prefer, the simpliest way to contact the ABAP consultant for help.
    Regards,
    Syed Hussain.

  • Replacement for obsolete field groups in ECC 6

    Hi ,
    I am working in a upgrade project from ecc4.7 to ecc6
    So i am finding difficulties for
    replacing FIELD groups.
    FIELD-GROUPS : HEADER, DETAIL.
    INSERT :    w_EBAN_TMP-EKORG
                w_EBAN_TMP-EKGRP
                w_EBAN_TMP-BANFN                 "Requisition Number
    INTO HEADER.
    INSERT      w_EBAN_TMP-EBELN                 "Purchase Order Number
                w_EBAN_TMP-EKORG                 "Purchase Org.
                w_EBAN_TMP-EKGRP                 "Purchase Group
                w_EBAN_TMP-BEDAT                 "Purchase Order Creation Date
                w_EBAN_TMP-BADAT                 "Requisition Creation Date
                w_EBAN_TMP-ESTKZ                 "(Manually or  MRP)
                w_EBAN_TMP-MATNR                 "Part number
                w_EBAN_TMP-BANFN                 "Requisition Number
                w_EBAN_TMP-BADAT                 "PO Creation Date
                w_EBAN_TMP-NAME1                 "Vendor Name
                TOT                            "used to get the avg
                TOTAL05                        " <= 05 days
                TOTAL10                        " <= 10 days
                TOTAL15                        " <= 15 days
                TOTAL20                        " <= 20 days
                TOTAL25                        " <= 25 days
                TOTAL30                        " <= 30 days
                TOTAL31                        " >= 31 days
                VALUE05
                VALUE10
                VALUE15
                VALUE20
                VALUE25
                VALUE30
                VALUE31
                VIAMAN                        "Created Manually
                VIAMRP                        "Created via MRP
                w_EBAN_TMP-URGENT               "Urgent mark         "AB25385
      INTO DETAIL.
    WHILE ,IN EXTENDED SYNTAX CHECKING A MESSAGE IS GIVING THAT .
    "  " FIELD-GROUPS ARE NO LONGER USED.
    The current ABAP command is obsolete
    Field groups cannot be created in the OO context.
    Internal Message Code: FIELD-GROUPS 000
    (The message cannot be hidden using pseudo-comment "#EC .., bzw. durch SET
    EXTENDED CHECK OFF/ON)  ""

    Extract from [Type Definitions and Data Declarations|http://help.sap.com/abapdocu_70/en/ABENABAP_OBJECTS_DIFF_TYPES_DATA.htm]
    No Definition of Field Groups in Methods
        The statement FIELD-GROUPS is not allowed in methods.
    Error message in methods if the following syntax is used:
    METHOD ...
      FIELD-GROUPS fg.
    ENDMETHOD.
    Reason:
    An [extract dataset|http://help.sap.com/abapdocu_70/en/ABENEXTRACT_DATASET_GLOSRY.htm] currently exists only as a global object of the [main program|http://help.sap.com/abapdocu_70/en/ABENFRAME_PROGRAM_GLOSRY.htm]. Therefore the field groups can only be defined globally in the main program. However, the definition of the field group structure, which is enerated at runtime by the statement INSERT ... INTO fg, can also be executed in methods.
    (SCI is "picky")
    Regards,
    Raymond

  • Difficulty finding BW infoobjects for corresponding R/3 fields

    Hello Guys
    I have enhanced an extractor 2LIS_13_VDKON, in LBWE ( LO Cockpit ). I added some new ( standard ) fields to the extract structure in the "Maintanence" tab. I also made sure that the fields were not "hidden" in the "data source" tab. Then I activated the extractor, checked in RSA6 for the new changes, and replicated this extractor in BW.
    Now, I need to find corresponding standard infoobjects ( delivered or active ) for these R/3 fields to map them. How do I find these infoobjects in BW?
    I have tried the following: Used tables RSOSFIELDMAP, ROOSFIELD etc. No help.
    I need to find infoobjects to a total of 45 R/3 new ( but standard ) fields.
    Please advise.
    Thanks in advance.

    Hi Sudheer
    I have a total of 150 fields that I have to map the infoobjects with. Dont u think its a tiresome job to find an infoobject for each of them manually, one by one.
    Dont u think there must be an easy method to do this ?
    Please advise.
    All these fields are a part of the standard extractor right, so there must be standard IO's in the business content ( mostly under delivered status ), we just need a method to trace them.
    Thanks.

  • Need to find out appropriate InfoObject of ERP fields

    Hi Gurus,
    I am unable to find out few InfoObjects of ERP fields. Following is a list:
    OBJNR        (Object number)
    PRJSTS       (Individual status of an object (short form))
    ASTNR        (Applicant number)
    PBUKR        (Company code for WBS element)
    ZUORD       (Network assignment)
    IMPRF          (Investment measure profile)
    ISIZE           (Investment Type)
    OTYPE        (Joint Venture Object Type)
    JIBCL          (JIB/JIBE Class)
    TIMESTMP   (Time created (Greenwich Meantime))
    WKGBTR    (Total Value in Transaction Currency)
    MVFLG       (Quantity Complete/Incomplete)
    TCODE        (Transaction Code)
    VORNA      (First Name)
    NACHN       (Last Name)
    Thanks,
    Sajjad

    Hi SAPBIAN,
    Thanks for providing me very helpful hint. Before I was trying SE16 using the provided table but no entries were showing but going through SE11 and the menu thing worked!
    However I have few questions:
    1- If I am unable to find table entries of any field, do I need to create Z InfoObject?
    2- If I see multiple A in OBJVERS column than which one to pick?
    3- If I see only D in OBJVERS, does it mean I need to install that InfoObject?
    Please advise.
    Thanks,
    Sajjad

  • How to find conversion exit MATN1 for the field MATNR

    Hi Friends !
    I want to run the infopackage with selection on material. But when put some value in the infopackage selection screen, it says "cannot find conversion exit MATN1 for the field MATNR".
    Ques is how to find where this conversion exit is written? Will it be written in ECC side or BI side?
    Source System Datasource : 0MAT_SALES_ATTR
    InfoObject in BI : 0MAT_SALES
    With Regards
    Rekha

    HI ,
    It will be available in the BI system itself as FM , you can find them in TCODE : SE37 --> provide the converstion exit name
    with star on both sides like MATN1 and press F4 key , every convertion exit will have two FM s , one for INPUT and
    one for OUT put , you can try the Test Run ofFM to check how it works
    For MATN1
    CONVERSION_EXIT_MATN1_INPUT
    CONVERSION_EXIT_MATN1_OUTPUT
    Regards,
    Sathya

  • Infoobject for an R3 field

    Hello all.
    Is there any way (table, transaction...) to find an infoobject in BW for a R3 field??
    I want to know if there is an infoobject for fields: KTOSL, VORSN, BUSTW and AWTYP from BSEG table..
    Thanks and best regards,
    Alfonso.

    Hi dear and welcome on board !
    Usually, if you don't find anything by searching in help on line, you have to look if there is something similar by comparing domain, lenght...but, in this case, it's better to create your own infoobjects !
    Anyway, try to search if these fields are used by some datasource (in R/3, ROOSFIELD table) and then verify if in BW (RSOSFIELDMAP table) you have related infosource with infoobject mapping !
    Hope it helps!
    Bye,
    Roberto
    ...and please don't forget to reward the answers...it's THE way to say thanks here !

  • Data not loading for new Fields InfoObjects from DSO to InfoCube

    Hi Gurus -
                   I have a DataSource that is providing data to existing DSO then to Infocube. My client asked me to added couple fields to DataSource and get the data to DSO and then DSO to InfoCube.
    Here is the Old scenarion:   DataSource -> DSO -> InfoCube.
    Here is the New Scenation:
         DataSource ( Added new fields) -> DSO (added new InfoObjects for Corresponding DataSource FIelds) -> InfoCube( Added new InfoObjects to mapped from DSO)
    I added the new fields to DataSource, added the corresponding InfoObjects to DSO and InfoCube.
    I successfully loaded data from DataSource to DSO. Data is populating for the new Fields/InfoObjects in DSO.
    But when I load data from DSO to InfoCube, I don't see any data for New Fields InfoObjects in the InfoCube.
    Data from DSO to InfoCube is loading fine for the Old InfoObjects Fields but not for the New InfoObjects I added in InfoCube.
    -Sonali

    Hi,
    Why dont u debug the load through DTP debugging and check what happens to the source field and target field once it passes through the transformation. You can easily trace back where the fields are becoming blank.
    The loads which you have mentioned earlier did it have values in Added Records/Transferred Records column for the cube.
    Regards,
    Mani

  • How to find out Last Changed Fields for a line item of a PO

    Dear All,
    Pls let me know is there any FM or procedure to find the last changed fields for each line item of a PO. I should be able to get the details on the basis of Last changed Date. Can u pls guide me in this?

    Hello,
    Check the table CDHDR,CDPOS for PO items,
    Check this code:
    REPORT ZV_GET_LATEST_SO .
    DATA: BEGIN OF ITAB OCCURS 0,
            OBJECTCLAS TYPE CDHDR-OBJECTCLAS,
            OBJECTID TYPE CDHDR-OBJECTID,
            CHANGENR TYPE CDHDR-CHANGENR,
            USERNAME TYPE CDHDR-USERNAME,
            UDATE TYPE CDHDR-UDATE,
            UTIME TYPE CDHDR-UTIME,
            TCODE TYPE CDHDR-TCODE,
            TABNAME TYPE CDPOS-TABNAME,
            TABKEY TYPE CDPOS-TABKEY,
            FNAME TYPE CDPOS-FNAME,
            CHNGIND TYPE CDPOS-CHNGIND,
          END OF ITAB.
    TABLES: CDHDR,CDPOS.
    DATA: LT_CDHDR LIKE CDHDR OCCURS 0 WITH HEADER LINE,
    LT_CDPOS LIKE CDPOS OCCURS 0 WITH HEADER LINE.
    *REFRESH AUSG.
    CLEAR CDHDR.
    CLEAR CDPOS.
    CDHDR-OBJECTCLAS = 'EINKBELEG'.
    CDHDR-OBJECTID   = '0000001784'.  " Purchase order number
    **SELECT A~OBJECTCLASS A~OBJECTID A~CHANGENR A~USERNAME A~UDATE A~UNAME
    **B~TCODE
    **B~TABNAME B~TABKEY B~FNAME B~CHNGIND INTO TABLE ITAB FROM CDHDR AS A
    **INNER JOIN CDPOS AS B ON A~OBJECTCLASS = B~OBJECTCLASS
    **                         A~OBJECTID    = B~OBJECTID
    **                         A~CHANGENR    = B~CHANGENR
    **                    WHERE OBJECTCLAS = 'VERKBELEG'
    **                      AND OBJECTID = '0000001784'.
    *SELECT * FROM CDPOS INTO TABLE LT_CDPOS WHERE OBJECTCLAS = 'VERKBELEG'
    *                                    AND OBJECTID = '0000001784'.
    *IF NOT LT_CDPOS[] IS INITIAL.
    *  SELECT *
    *  INTO   TABLE LT_CDHDR
    *  FROM   CDHDR
    *  FOR    ALL ENTRIES IN LT_CDPOS
    *  WHERE  OBJECTCLAS = LT_CDPOS-OBJECTCLAS
    *  AND    OBJECTID = LT_CDPOS-OBJECTID
    *  AND    CHANGENR = LT_CDPOS-CHANGENR.
    *ENDIF.
    **  SORT ITAB BY OBJECTCLAS ODJECTID DESCENDING.
    *LOOP AT ITAB.
    *  WRITE: ITAB-UDATE."ITAB-UNAME.
    *ENDLOOP.
    *--- Interne Tabellen -------------------------------------------------
    DATA: BEGIN OF ICDSHW OCCURS 50.       "Ausgabeaufbereitung
            INCLUDE STRUCTURE CDSHW.       "Zwischendatei
    DATA: END OF ICDSHW.
    CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
         EXPORTING
              DATE_OF_CHANGE    = CDHDR-UDATE
              OBJECTCLASS       = CDHDR-OBJECTCLAS
              OBJECTID          = CDHDR-OBJECTID
              TIME_OF_CHANGE    = CDHDR-UTIME
              USERNAME          = CDHDR-USERNAME
         TABLES
              I_CDHDR           = LT_CDHDR
         EXCEPTIONS
              NO_POSITION_FOUND = 1
              OTHERS            = 2.
    LOOP AT LT_CDHDR.
      CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
        EXPORTING
    *   ARCHIVE_HANDLE                = 0
          CHANGENUMBER                  = LT_CDHDR-CHANGENR
    *   TABLEKEY                      = '00000000 '
    *   TABLENAME                     = ' '
    * IMPORTING
    *   HEADER                        =
       TABLES
         EDITPOS                       = ICDSHW
    *   EDITPOS_WITH_HEADER           =
    * EXCEPTIONS
    *   NO_POSITION_FOUND             = 1
    *   WRONG_ACCESS_TO_ARCHIVE       = 2
    *   OTHERS                        = 3
      IF SY-SUBRC <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
      LOOP AT ICDSHW.
        IF ICDSHW-TABKEY+3(10) = '0000001784'
           AND ICDSHW-TABKEY+13(6) = '000001'.
        ENDIF.
      ENDLOOP.
    ENDLOOP.
    Vasanth

  • How to find table name for the fields from Standard Extractor in CRM system

    How to find table name of fields from the standard extractor in CRM system ?
    e.g. We use LBWE TCode in R/3 system to find table name for the field from Extractor VCSCL(e.g.).
    Likewise is there any way to find table name for the fields from Standard extractor like 0CRM_LEAD_I.

    Hi ,
    Please find the link below for understanding BW CRM analysis.
    http://help.sap.com/bp_biv135/html/bw.htm
    activate the CRM DSs by scenario:
    1) Activate the application component hierarchy (tcode RSA9). Changes made to the application component hierarchy in the CRM system can be transferred to the BW using the "Edit Application Component Hierarchy" (SBIW - Postprocessing of DataSources).
    SAP Note 434886 must be implemented in CRM 3.0 before the application component hierarchy is activated.
    2) Activate the Business Content DataSources (tcode RSA5).
    Select/enter the application component and choose Execute (F8).
    To compare the shipped and active versions, choose the 'Select Delta' pushbutton. If there is no active version of the DataSource, it is selected automatically.
    To activate the shipped version, choose the 'Transfer DataSources' pushbutton.
    3) Management of the versions of the BW-Adapter metadata (tcode BWA5). All DataSources are displayed that are managed by the BW Adapter.
    As in transaction RSA5 (Service API Metadata Activation), the 'Select Delta' function can be used to select the inactive DataSources or compare shipped and active versions.
    You can also go directly to the screen for maintaining DataSources that are managed by the BW Adapter.
    The 'Compare Version' function makes a detailed comparison of the shipped and active versions.
    All BW-Adapter metadata is considered when versions are compared:
    Header information (Table SMOXHEAD)
    Mapping information (Table SMOXRELP)
    Global selection conditions (Table SMOXGSEL)
    Attribute key fields (Table SMOXAFLD)
    Hope this helps.
    Regards,
    csm reddy

Maybe you are looking for