Finding Internet ip Address
my project depends on ip address...if a system is using proxy ip address for internet connection..My lan ip is different and internet ip address is differen...By java code i found lan ip ...Is it possible to find the internet proxy ip address using java code...in http://www.haxial.com/whatismyipaddress they have achieved.pLEASE IF ANYBODY IS HAVING THE CODE for finding internet proxy ip address..pLEASE SEND ME
hi nivaz_sharma,
You need the public ip address of you pc connected to internet through a proxy. first of all why do you need your public ipaddress. Are you communicating with another application over the internet. If it is so then you can ask that application itself using whatever protocol you are using aboute your own ip address as it will to knowing your public ipaddress only. In case your protocol does not supports such query (if you are using a standard protocol such as http smtp pop3) then you can implement your own server that provides this functonlity and place that server outside your network on the internet. If you want i can give you the source code for such server.
Hope that would help,
VJ
Similar Messages
-
WRT54GL Wireless Router says "No Internet Access" or "Cannot find IP Server Address"
I tried setting up a home network with my above Linksys router and can't connect to the internet now. I have the ethernet cable from my DSL Modem hooked into the ethernet port on the back of the Router. In port one, I have a cable which attaches directly to my laptop as I was advised to use a cable for initial setup of my home wireless network. I was able to get into the router to set all the passphrases and wireless security settings, etc. My ISP is PPPoe and I have entered both the UserId and Password that my ISP provided. However, upon clicking on the wireless icon, my system states I am connected but the status screen shows "No internet access". I have no problem connecting to the Internet when the cable runs from my DSL modem into my computer, so it's something to do with the router blocking it now.
My ISP does not support my Linksys router, of course, and they tell me I need to contact the manufacturer telling me the router needs to be set up as a 'bridge" ??? There is no mention of anything like this in the manual and I do not know if there is a setting on the router that is somehow blocking my being able to get an internet connection. This is all still with cables attached. Again, I seem to be able to 'connect' to the wireless network but I now cannot get to the Internet thru the router...
Can anyone tell me what I am doing wrong? Thanks!Thanks, I did try the step by step instructions and changing the internet type to DHCP but still unable to connect to the internet. Setting back to PPPoE type, the error message now continues to say it "cannot find the IP address of the PPPoE server." I have reset the router back to factory defaults and reset the security and setup settings to no avail. My ISP (Juno), after providing the connection type, login name and password, stated I need to contact the manufacturer of the router and ask that it needs to be set up as a "Bridge". ??? Does this sound familiar to anyone?
My modem is a DSL 2Wire. On it's homepage, there is a field called ATM Encapsulation that is set to "Bridged LLC" but I am not touching the settings of my modem for fear of messing up my internet connection altogether. It has to be some setting on the router, is all I can think of. On the Status page of my Linksys router where I try to connect to the internet, once PPPoE is selected, the blank IP address and Subnet Mask settings are zeroes and you cannot enter anything into those fields. (I was going to try entering the address of my modem just to test if that might work...)
This is very frustrating. Even tried the 30-30-30 solution I read elsewhere worked for someone. Nothing. Same error message. Once I hook the ethernet cable from my modem into my router, I no longer can access the internet because it keeps saying it cannot find the PPPoE IP address. -
Help! i cannot find internet
i pulled up the moniter and it sed "you are connected to the acsess point, but cannot find internet"
i need fast. please and thank youCould be a couple of things. Depending on your modem type, you may have an address conflict - I had to change the IP address on the router. Again, depending on your modem and connection type, you may need to bridge your modem. If you haven't contacted your ISP's support people, I would make that my next step. They know best the ins and outs of the modem that their service uses -or at least they should. Good luck!
-
My riouter worked great for about 2 months. Now can not find internet. Setup runs all way to finding internet. have connected cable from modem to router. Setup can not find internet. I can plug cable from modem to pc and internet connects find. Any ideas? Is the router toast?
Access the setup page of the router by launching an
Browser and type on the address bar, 192.168.1.1 and press enter. When
it prompts for the username and password, leave the username field
empty and provide password as "admin" (Without quotes)
click on ok.
On the main setup page the ""Internet Connection Type"" should be
on ""Obtain IP Automatically - DHCP “. Click on the Save Settings
button.
Now click on the sub tab ""MAC address clone"".
- Click on enable
Click Clone & click save settings
Check WAN Ip on Status page of router ....
If getting Valid Ip .... try going online
If not ... power cycle for 4-5 minutes & then again check the WAN Ip address ..... -
Internet ip address is internal modem address
hi!
first of all i apologize if i've overlooked a simular post and ask a previously discussed question again, but i couldn't find a clear answer.
i tried to setup dyndns on my wrt320n (fw: v1.0.03 build 010 Jul 24, 2009). after i created an acoount at dyndns and configured it on the router, i recognized that the internet ip address is the internal ip of my modem. so my dyndns address gets resolved to the internal ip of my modem. how can the router get the real external ip so dyndns is working correctly?
thx, kopi
Solved!
Go to Solution.the modem my isp gave me is a fritz!box fon wlan 7140 sl
status:Firmware Version: v1.0.03 build 010Jul 24, 2009
Firmware Verification: b719582d5f3e57c1f7932a15d20ff509
Current Time: Mon, 01 Mar 2010 22:38:02
Internet MAC Address: 00:25:9C:47:EA:AF
Host Name:
Domain Name:
Internet Connection
Connection Type: Automatic Configuration - DHCP
Internet IP Address: 192.168.0.21
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.0.1
DNS1: 192.168.0.1
DNS2:
DNS3:
MTU: 1500
DHCP Lease Time: 10 Days
ipconfig response connected via wrt
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 00-....
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a445:c9c3:a583:8a74%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, 01. March 2010 22:41:05
Lease Expires . . . . . . . . . . : Tuesday, 02. March 2010 22:41:05
Default Gateway . . . . . . . . . : 192.168.1.1
DHCP Server . . . . . . . . . . . : 192.168.1.1
DHCPv6 IAID . . . . . . . . . . . : 234890776
DHCPv6 Client DUID. . . . . . . . : 00-....
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled
ipconfig response connected directly to modem
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8040 PCI-E Fast Ethernet Controller
Physical Address. . . . . . . . . : 00-....
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a445:c9c3:a583:8a74%11(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.1.101(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Monday, 01. March 2010 22:40:47
Lease Expires . . . . . . . . . . : Tuesday, 02. March 2010 22:40:47
Default Gateway . . . . . . . . . : 192.168.0.1
DHCP Server . . . . . . . . . . . : 192.168.0.1
DHCPv6 IAID . . . . . . . . . . . : 234888457
DHCPv6 Client DUID. . . . . . . . : 00-....
DNS Servers . . . . . . . . . . . : 192.168.0.1
NetBIOS over Tcpip. . . . . . . . : Enabled -
Where do I find the MAC address on an ipad 2
I just purchased an apple ipad 2, since i have not been on an apple computer for some time i need help setting up my wifi. to start with i need the MAC address so I can put it in my router and get to the internet. can somone please help
scottTry this:
http://apple-ipad-tablet-help.blogspot.com/2010/03/how-to-find-ipad-mac-address. html
-Ben -
Is there any way to find number of addresses in to and cc list before fetch
Hi,
I am fetchig mails using IMAP.
I want to fetch from,to cc addresses for each mail.
But i foung a mail in my account having 35690 email addresses in to list.
So fetching all these addresses is not worth full for me.
So is there any way to find how many addresses are there in to and cc list before actually fetching them?
Thanks in advance.
-Prashanth.No.
-
WHERE DO I FIND THE IP ADDRESS AND CAN 2 PEOPLE HAVE THE SAME ADDRESS?
MY EMAIL WAS HACKED INTO IN APRIL, I CHANGED PASSWORD, I PUT IN EXTRA SECURITY ON FACEBOOK WHO THEN SENT EMAIL EVERY TIME I SIGNED IN STATING MY SECURITY CODE, TIME, IP ADDRESS AND CITY AND STATE (CEDAR RAPIDS IA AND I AM FROM FAIRHOPE AL). I WAS HACKED INTO AGAIN IN MAY, CHANGED MY PASSWORD AGAIN AND DEACTIVATED MY FACE BOOK ACCT. SO FAR NO MORE HACKING INTO MY EMAIL. I VERIFIED MY IP ADDRESS AND WANT TO KNOW HOW SOMEONE ELSE FROM A DIFFERENT PART OF THE COUNTRY CAN HAVE THE SAME IP ADDRESS.
You can find the IP address at: Settings > General > Network tap your network (blue circle with > in it) and voila, your IP address Subnet Mask, Router, DNS, etc. will be listed.
-
Where can I find an email address for Verizon customer service?
I would like to send an email to Verizon outlining my opinion of their website and how it might be improved, but I can't find an email address. When I asked the representative, she directed me to the "Contact Us" tab. There I found a postal address!
There is no email address only a postal address. You can try to call CS, but they have no idea what the website does or is, or how to push opinions or concerns up the line. If you go a regional executive route, you might get a call, but they are not familiar with website operations or even know who to send your issue to. Perhaps one of your improvement ideas is something we can assist you with, in case it was something missed or we know another way to accomplish what it is you're trying to do.
-
How do i find the email address for my HP Deskjet 3051A
I need to find the email address for my printer to finish up my eprint capabilties for my IPad Air.
I have a HP Desktop 3051A wireless printer.Hi mjs208, thanks for posting your question
Here are the exact steps you'll need for that email - please follow this document: Getting Started with ePrint
If you also need more information on Airprinting, here is the link for that as well: How to Use Apple's AirPrint Over a Wireless Network
Cheers
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. *** -
How do I find the IP address of a network Printer
I have a dell 1320C color netwrk printer connected to a routher with a Cat 5e cable. I want to find out what the IP address is on the network. How can my Mac Book Pro auto detect the printer like my Dell laptop used to do? If it can't auto detect the printer, then how do I find the IP address?
http://support.dell.com/support/edocs/systems/prn1320c/en/ug/1320c_en/index.htm# ugtop
"You can also print the printer settings page by the following. Press and hold the Continue button on the printer until the Ready/Data indicator blinks."
But it appears your printer only works with Microsoft Windows http://support.dell.com/support/edocs/systems/prn1320c/en/ug/1320c_en/section19. htm#1056812 -
How do i find the IP address of my printer?
I have an HP 7130 all-in-one printer connected to a windows computer that is connected to a wireless router and modem. im using my macbook, which is also wireless to the same modem, and i am trying to set up a printer which requires the IP address of the printer it cannot find on its own. How do i find the IP address of the printer?
Thanks!Hi Gavin,
Actually it was a typo fault on my behalf. Unfortunately the 7130 will not have an IP address as it doesn't have an Ethernet connection - just USB.
So, you are either going to have to connect the printer to the Windows computer and print from the Mac via the share or get some other hardware to share the printer. There are a number of wireless print servers on the market which allow you to connect your printer to its USB socket and then print wirelessly from your Windows and Mac computers. Or you could look at replacing the router with an Airport Extreme, which has a USB port for a printer.
If you want use what you have then connect the printer to the Windows computer and share it. Then on your Mac, open the Printer Setup Utility and click Add. Click More Printers and then Windows Printing > Network Neighborhood. You should see the Workgroup name set in the Windows computer appear. If it doesn't then wait several minutes and try again (sometimes it can take a while before Windows computers appear in this list). Once the workgroup name appears double click it and select the computer from the new menu. At this stage you may be prompted for a user name and password for the Windows computer. Input this information and then the printer share should appear. Select it and then browse for your printer model. Now there is a good chance that your model is not listed under the HP menu so you will have to use one of the provided drivers in the list and see which one works best for your printer. Once you have selected an appropriate model click Add. Now you should be able to print via wireless..
Regards,
Paul -
Is there a way to find the email address of the user's from SCCM database.
Hi All,
I am using SCCM 2012 R2 and trying to find a query/report that can help in finding the email address of the user the machine is assigned to (Primary device). And if that is a machine which is being shared between different user, I need to gather the same
information or the user who last logged on that machine.
Can you please help?
Thanks
ManishMy opinion: I think you'll need to define what, to you, means "primary user". a primary user relationship can be defined manually by you one by one in the console, automatically by usage, imported via script, or the end user (if they know
how and you've allowed this in settings) can indicate a machine is a primary machine for themselves.
How is primary user relationship set, in your environment? Depending upon how that relationship is determined in your environment, then you can track for that particular machine how or why the relationship you expect to be there, isn't the relationship
the database acknowledges.
Standardize. Simplify. Automate. -
I have an orchestration published as a web service. It was working fine on our test environment, we deployed to production, and now getting this error. The website wouldn't go in the BizTalk MSI, so we copied the files. We reset the Authentication
to match the test system (we are using Basic Auth).
When we try to browse the webservice in the browser, it prompt for userid/password, we enter it, then it gives the following error.
I'm not even sure what it means by "base address", if URL was https://prod.mydomain.com/myapp/myservice.svc, would https://prod.mydomain.com be the based address? In the test environment, the URL is https://test.mydomain.com/myapp/myservice.svc.
In both environments, we have a customer calling this webservice.
Also, I don't know what it means "scheme http". We are using https:... on the URL.
I'm thinking this is either security related, something to do with the app pool being different, or maybe something to do with bindings.
Thanks,
Neal Walter
http://MyLifeIsMyMessage.net
Web.config:
<services>
<!-- Note: the service name must match the configuration name for the service implementation. -->
<service name="Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkServiceInstance" behaviorConfiguration="ServiceBehaviorConfiguration">
<endpoint name="HttpMexEndpoint" address="mex" binding="mexHttpBinding" bindingConfiguration="" contract="IMetadataExchange" />
<!--<endpoint name="HttpsMexEndpoint" address="mex" binding="mexHttpsBinding" bindingConfiguration="" contract="IMetadataExchange" />-->
</service>
</services>
</system.serviceModel>
<system.webServer>
<security>
<authorization>
<remove users="*" roles="" verbs="" />
<add accessType="Allow" users="myCustomer" />
</authorization>
</security>
</system.webServer>
Server Error in '/eSecuritelIn' Application.
Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered
base address schemes are [https].
Description:
An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the
code. Exception Details: System.InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https].
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using
the exception stack trace below.
Stack Trace:
[InvalidOperationException: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes
are [https].]
System.ServiceModel.ServiceHostBase.MakeAbsoluteUri(Uri relativeOrAbsoluteUri, Binding binding, UriSchemeKeyedCollection baseAddresses) +16582113
System.ServiceModel.Description.ConfigLoader.LoadServiceDescription(ServiceHostBase host, ServiceDescription description, ServiceElement serviceElement, Action`1
addBaseAddress) +1082
System.ServiceModel.ServiceHostBase.ApplyConfiguration() +156
System.ServiceModel.ServiceHostBase.InitializeDescription(UriSchemeKeyedCollection baseAddresses) +215
System.ServiceModel.ServiceHost..ctor(Object singletonInstance, Uri[] baseAddresses) +400
Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHost`3..ctor(IsolatedReceiverType isolatedReceiver, BizTalkServiceInstance serviceInstance, Uri[] baseAddresses)
+36
Microsoft.BizTalk.Adapter.Wcf.Runtime.WebServiceHostFactory`3.CreateServiceHost(String constructorString, Uri[] baseAddresses) +533
System.ServiceModel.HostingManager.CreateService(String normalizedVirtualPath) +1413
System.ServiceModel.HostingManager.ActivateService(String normalizedVirtualPath) +50
System.ServiceModel.HostingManager.EnsureServiceAvailable(String normalizedVirtualPath) +1172
[ServiceActivationException: The service '/eSecuritelIn/eSecuritelIn_OrchPublished_RepairEquipmentService.svc' cannot be activated due to an exception during compilation.
The exception message is: Could not find a base address that matches scheme http for the endpoint with binding MetadataExchangeHttpBinding. Registered base address schemes are [https]..]
System.Runtime.AsyncResult.End(IAsyncResult result) +901424
System.ServiceModel.Activation.HostedHttpRequestAsyncResult.End(IAsyncResult result) +178702
System.Web.AsyncEventExecutionStep.OnAsyncEventCompletion(IAsyncResult ar) +107
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET
Version:4.0.30319.272When you want to migrate Web Applications from one environment to other there are multiple ways to achieve it.
1) Migrate in MSI- Export MSI and select the option for your Web Application, however I don't recommend this option
2) Is to browse the folder for Web Application(Right click on web app and browse). Copy this folder(normally within inetpub folder) and take it to the inetpub folder of other environment. Later from the IISManager create application.
Are you not using the same Binding file?
Check you web.config file and see if the endpoint is configured for mexHTTpBinding.
Old: binding="mexHttpBinding"
New: binding="mexHttpsBinding"
web.config snippet:
<services>
<service behaviorConfiguration="ServiceBehavior" name="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService">
<endpoint behaviorConfiguration="AspNetAjaxBehavior" binding="webHttpBinding" bindingConfiguration="webBinding"
contract="LIMS.UI.Web.WCFServices.Accessioning.QuickDataEntryService" />
<endpoint address="mex" binding="mexHttpsBinding" contract="IMetadataExchange" />
</service>
Also look into the below article- How to fix: "Could not find a base
address that matches scheme http for the endpoint with binding WebHttpBinding" Errors
Moving to https = Could not find a base address that matches scheme
Thanks,
Prashant
Please mark this post accordingly if it answers your query or is helpful. -
How to find out the address of a servlet without a Request
Hi all,
in a servlet, I need to find out its address before the first client request (the best would be in the init method).
So I have no access to a HttpServletRequest object that normally offers this information.
Is this possible?
Thanks,
RayBenIf you need to know the host name, then something says me that your code is already not portable :)
No, it is not possible. Not without nasty stuff or lookups. Why do you need to know about it then? It sounds like if you want to set some host-specific settings. You can better use the init-param in web.xml or configuration files for this than hardwiring it in Java source code.
Maybe you are looking for
-
Timeline won't back up (not enough space)
Timeline won't back up because it says there is not enough space on my external drive. This never happened before. I have 10.6.8. I just restored my new hard drive from Timeline. It was an easy restoration. The first time I backed up on Timeline,
-
My ipod is recognized by windows but not itunes
Ok, I had trouble with my 4gb black nano when I had to install it, i used TrevorQ's tip and it worked. Now I need to update some songs on my ipod and it wont recognize it now 6.05.20 Itunes 2006-03-23 Ipod Updater I cant end the "IpodService.exe" pro
-
KB article tells me you cannot install an OS on a computer that has a newer version of the OS... is there a way around this? i want to go from 5.7 to 5.6. thank you
-
Final Cut Pro X Blu Ray chapters
I have created several Blu Rays using the chapter markers in FCPX and if I create a DVD from the share menu it works fine in either a DVD or Blu Ray player. However if I create a BD from the same original 1080P project and use share/create Blu ray th
-
Partitioning attempts seems to have tripled the data on my hard drive
Greetings, I am on a 2008 24" imac running Snow Leopard 10.6.8. I have been attempting to partition my hard drive so that I can install linux. My various partitioning attempts have resulted in a hardrive that contain more than 3 times the data than