Finding IP of clients connected to a particular server
Hi,
How can we trace the IP of a client connected to the server and based on that deny access to a particular IP address?
Did you really read the link? The query that is given there needs to be in a login trigger so the IP address is visible for each session in v$session.
Yes, of course, if you just run that query at a SQL*Plus prompt, it will show you your IP address - that is the point.
Once you can see the IP address in v$session, you can deny access to a specific IP in the login trigger.
Similar Messages
-
Can a Snow Leopard client connect to a Lion Server?
I have an XSAN setup with two Mac Mini servers.
I have a few Xserve lying around and I want to make use of them.
One Duo Core which is not working at the moment. I think I can install Lion on that one? Right?
Then I have two G5 - none intel, which I'm thinking I'll reinstall Snow Leopard on and use them as clients.
Can they connect to a Lion Server? I have a few XSAN licenses left which I think I need for OS's older than Lion?
I short, can a Snow Leopard client connect to a Lion Server?One Duo Core which is not working at the moment. I think I can install Lion on that one? Right?
You can't install Lion on a Core Duo-based system It requries Core2 Duo as a baseline. The Core Duo is a 32-bit chip whereas the Core2 Duo is 64-bit.
Then I have two G5 - none intel, which I'm thinking I'll reinstall Snow Leopard on and use them as clients.
Nope, again. Snow Leopard requires an Intel-based system. The highest you can go with the PowerPC machines is Leopard (10.5.x)
Can they connect to a Lion Server? I have a few XSAN licenses left which I think I need for OS's older than Lion?
This may be irrelevant given the above, but define 'connect' please. There are a myriad of ways of 'connecting' a client to a server. In many cases they don't have to be the same OS, platform, processor or anything else (how many web servers do you think are running Mac OS X to match your client? -
OS X client connecting to Windows 2003 Server SMB
My OS X 10.6.7 clients are connecting to Windows 2003 Server SMB share. They open files and edit them. Strange thing is that in Windows 2003 Server Open Files the files opened are listed like this:
filename.tiff:AFP_Resource
and the user is unable to save the file to the same location.
Anyone else experienced the same problem?My OS X 10.6.7 clients are connecting to Windows 2003 Server SMB share. They open files and edit them. Strange thing is that in Windows 2003 Server Open Files the files opened are listed like this:
filename.tiff:AFP_Resource
and the user is unable to save the file to the same location.
Anyone else experienced the same problem? -
SCCM updates not deploying to member clients connected to the distribution server
Hi Support
Please if somebody can help me with the current issue iam having interms of SCCM definition updates from distribution server not being deployed to all devices(machines)that are connected to that distribution server. As a result of this all machines
are now out of date.
It was working perfectly all through this time until last month, i noticed that most of the machines were not recieving their daily definition updates which would show on the machine side under the Software center console. By seeing this i had to troubleshoot
from the machine side as well as the server side to locatet the issue but my attempts were not successful the issue.
However, after going through the event logs i noticed the below status of WSUS had errors so thought might be one of the factors affecting the distribution point(server) to all the 200 plus machines which are connected via the site code(002) of the distribution
server. Please confirm on this.
Please i really need your technical assistance so i can reslove the issue from my end.
Should you need more information, please let me know.
Thankscan you provide the scanagent.log and
WUAHandler.log on the client machines as well as wsyncmgr.log on the SCCM site server?
Blog: http://theinfraguys.com
Follow me at Facebook
The Infra Guys Facebook Page
Please remember to click Mark as Answer on the answer if it helps you in anyway -
The Finder automaticly try to connect to a remote server then freeze
In fact the title tell it all!
After a restart or after a long periode of sleep mode, my computer always try to connect to a remote server that i was using many year a go when I open a finder window to browse my file. The login and password window appear and if i try to cancel the finder crash. If i make a force quit and i open a window (by clicking on the finder icon on the dock by exemple) the login and password window appear again and the finder freeze. To be able to make my computer work fine I have to desactivate airport and then force-quit the finder, open a finder window and re-activate airport.
I went to the keychain utility panel to try to remove a reference to this old remote server by my computer try to connect automaticly any way. Could any body can help this probleme make me go crazy!I did what you said, it make me think that a was using Synchronize Pro to sync a folder on the remote server with a folder on my computer, so i was sure the this why the computer try to log into this server so i trash a the preference file of synchronize pro and i restart my computer, I was already celebrate then bang! The computer freeze again just after the startup!!!!!!!
So there is the list of thing on the consol, I'm not good whit those kind of thing so i put all the informations. The computer crash at 20:49:??
Feb 21 20:48:35 localhost SystemStarter: Bienvenue sur Macintosh.
Feb 21 20:48:35 localhost kernel: UniNEnet: Ethernet address 00:03:93:91:48:da
Feb 21 20:48:35 localhost kernel: AirPortDriver: Ethernet address 00:30:65:03:6b:85
Feb 21 20:48:35 localhost kernel: IOFireWireIP: FireWire address 00:03:93:ff:fe:91:48:da
Feb 21 20:48:35 localhost lookupd[129]: lookupd (version 324.13) starting - Wed Feb 21 20:48:35 2007
Feb 21 20:48:40 localhost ConsoleMessage: Selecting SymDC Extension
Feb 21 20:48:40 localhost ConsoleMessage: Starting SecurityServer
Feb 21 20:48:40 localhost ConsoleMessage: Starting Apple Multicast DNS Responder
Feb 21 20:48:40 localhost ConsoleMessage: Starting kernel event agent
Feb 21 20:48:40 localhost ConsoleMessage: Starting Virtual PC OS Services
Feb 21 20:48:40 localhost ConsoleMessage: Starting timed execution services
Feb 21 20:48:40 localhost ConsoleMessage: Initializing network
Feb 21 20:48:43 localhost diskarbitrationd[91]: disk0s5 hfs 73F314A9-9918-3ED8-83E7-27E8805BA20C Macintosh HD /
Feb 21 20:48:43 localhost SystemStarter: Selecting SymDC Extension
Feb 21 20:48:43 localhost SystemStarter: Starting SecurityServer
Feb 21 20:48:43 localhost SystemStarter: D?marrage du r?pondeur DNS multi-diffusion Apple
Feb 21 20:48:43 localhost SystemStarter: D?marrage de l?agent d??v?nement du kernel
Feb 21 20:48:43 localhost SystemStarter: Starting Virtual PC OS Services
Feb 21 20:48:44 localhost mDNSResponder[174]: mDNSResponder-58.8.1 (Jan 31 2005 21:11:41) starting
Feb 21 20:48:44 localhost mDNSResponder[174]: SetupAddr invalid sa_family 0
Feb 21 20:48:47 localhost kernel: ATY,Stone_A: vram [bc000000:01000000]
Feb 21 20:48:47 localhost kernel: ATY,Stone_B: vram [b8000000:01000000]
Feb 21 20:48:47 localhost SystemStarter: The "HasShadow" window property is obsolete. Use CGSSetWindowShadowAndRimParameters(cid, wid, 0.0,0.0, 0,0, CGSNoShadowStyle) to turn off the window shadow instead. Set a break-point on CGSLogMessage to find out where this property is set.
Feb 21 20:48:47 localhost ConsoleMessage: Checking disks
Feb 21 20:48:47 localhost syslogd: /dev/console: Input/output error
Feb 21 20:48:47 localhost init: kernel security level changed from 0 to 1
Feb 21 20:48:47 localhost ConsoleMessage: Starting Norton Volume Assist services
Feb 21 20:48:47 localhost ConsoleMessage: Starting File Deletion Tracking services
Feb 21 20:48:48 localhost DirectoryService[204]: Launched version 1.8.4 (v258.2)
Feb 21 20:48:48 localhost loginwindow[191]: Sent launch request message to DirectoryService mach_init port
aped[181]: Attach denied: super-user process, for SecurityAgent[207]
Feb 21 20:48:52 localhost mach_init[2]: Server 0 in bootstrap d03 uid 0: "/usr/libexec/fix_prebinding": exited with non-zero status 1 [pid 216]
Feb 21 20:48:55 localhost SystemStarter: Attente de initialisation du r?seau
Feb 21 20:48:58 localhost ConsoleMessage: Loading Shared IP extension
Feb 21 20:48:58 localhost SystemStarter: Chargement de l?extension de l?adresse IP partag?e
Feb 21 20:48:58 localhost SystemStarter: Start up Flexlm License Server for AW Apps (233) did not complete successfully.
Feb 21 20:48:58 localhost NUMCompatibilityCheck[248]: OS version 0790 accepted as okay.
Feb 21 20:48:59 localhost ConsoleMessage: Starting Apple File Service
Feb 21 20:48:59 localhost ConsoleMessage: Starting printing services
Feb 21 20:48:59 localhost ConsoleMessage: Starting KeyAccess
Feb 21 20:48:59 localhost SystemStarter: D?marrage du service de fichiers Apple
Feb 21 20:48:59 localhost SystemStarter: D?marrage des services d?impression
Feb 21 20:48:59 localhost SystemStarter: Starting KeyAccess
Feb 21 20:48:59 localhost KeyAccess: started
Feb 21 20:49:04 localhost SystemStarter: Attente de Extensions du r?seau
Feb 21 20:49:05 localhost ConsoleMessage: Loading IP Firewall extension
Feb 21 20:49:05 localhost SystemStarter: Chargement de l?extension du coupe-feu IP
aped[181]: Attach denied: super-user process, for KeyAccess[293]
Feb 21 20:49:07 localhost kernel: IP packet filtering initialized, divert enabled, rule-based forwarding enabled, default to accept, logging disabled
Feb 21 20:49:07 localhost kernel: IPv6 packet filtering initialized, default to accept, logging disabled
Feb 21 20:49:07 localhost kernel: IP firewall loaded
Feb 21 20:49:07 localhost SystemStarter: Attente de Extensions du r?seau
Feb 21 20:49:08 localhost ConsoleMessage: Starting internet services
Feb 21 20:49:08 localhost SystemStarter: D?marrage des services internet
Feb 21 20:49:09 localhost xinetd[309]: xinetd Version 2.3.11 started with libwrap options compiled in.
Feb 21 20:49:09 localhost xinetd[309]: Started working: 2 available services
Feb 21 20:49:13 localhost SystemStarter: Attente de Printing Services
Feb 21 20:49:16 localhost SystemStarter: Attente de Printing Services
Feb 21 20:49:17 localhost SystemStarter: The following StartupItems failed to properly start:
Feb 21 20:49:17 localhost SystemStarter: /Library/StartupItems/AW_flexlmStartupItem
Feb 21 20:49:17 localhost SystemStarter: - execution of Startup script failed
Feb 21 20:49:17 localhost SystemStarter:
Feb 21 20:49:17 localhost SystemStarter: D?marrage termin?.
Feb 21 20:49:59 localhost crontab[321]: (root) LIST (Marc) -
How to recursively find shortcuts whose target point to a particular server IP
I have a rather large directory containing multiple subfolders containing subfolders. Is there a script that will search through the entire directory structure, and give me a list of shortcuts whose target point to a particular server's IP address?
This script uses PowerShell.
# List all .lnk files and their image paths
#Replace variables IPAddress and Path with values for your environment.
$IPAddress = "IP address to filter on"
Function Get-Shortcuts
$Path = "Directory_to_Search"
$Items = Get-ChildItem $Path -Recurse -Include *.lnk, *.url
ForEach ($Item in $Items) {
$Shell = New-Object -ComObject WScript.Shell
$Properties = @{
ShortcutName = $Item.Name
Target = $Shell.CreateShortcut($Item).targetpath
New-Object PSObject -Property $Properties
[Runtime.InteropServices.Marshal]::ReleaseComObject($Shell) | Out-Null
Get-Shortcuts | Where {$_.Target -like "*$IPAddress*"}
###Adapted from http://www.computerperformance.co.uk/powershell/powershell_create_shortcut.htm -
Oracle 10g client connect to oracle 11g server
Hi All,
In my system, i have installed oracle 11g server(11.1.0.6.0). while i try to connect to this server by 10g client in my friends system,which is in the same network,it is showing
ORA-12545: Connect failed because target host or object does not exist,
then i tried with other system (using oracle10g client), its showing
ORA-12154: TNS:could not resolve the connect identifier specified
then i tried with one another system (using oracle 9i client) -- its is connected.
what may be the problem. not connecting using oracle 10g client. and also different error.user12479258 wrote:
Hi,
The client version is 10.2.0.1
this version may not be connect to oracle 11g?
If so then which are the client version will connect to oracle11g server(11.1.0.6.0).A 10.2 client will connect to an 11.x database, but the sqlnet.ora and tnsnames.ora files must be configured correctly. The errors you reported are not uncommon and have been diagnosed repeatedly on this forum. Let's not confuse the issue by comparing / copying files from various machines, as that has already created a moving target of error messages.
On the client that is exhibiting the problem ...
Do you have a single ORACLE_HOME? A single TNSNAMES.ORA?
On that machine, at a command prompt, do a tnsping on the service in question. Also try to connect with sqlplus. Copy the entire session -- commands and results -- and paste it all back here.
On the server machine, log on as the owner of the oracle software, and at a command prompt enter the command "lsnrctl status". Again, Copy the entire session -- commands and results -- and paste it all back here. -
Why won't a Windows 7 client connect to my web server?
I've got 5 Mac clients that can connect to my Snow Leopard server. They use file sharing, iCal, and web services.
We're trying to put a Windows 7 client on the network to use just file sharing and web services. Unfortunately, I can't get the Windows client to connect to the server at all.
We're using an Airport Extreme as a local network router. All devices are successfully connecting to this device.
When I try to access web services on the server using the Windows 7 client, I get an error message that the server is inaccessible.
Anyone know what might be different about how the Windows device is accessing the server vs how the Mac devices are?How are you trying to connect to it? Just typing in its web address in a browser?
Is your DNS configured correctly? -
Can Tiger 10.4 clients connect to Mountain Lion server
We are in the process of an upgrade and are doing the servers first.
Clients are mostly running OS X 10.4.11, we have already upgraded one server ( 10.7.5 Lion) and the 10.4 clients can connect no problem.
The next 2 servers we bought now have 10.8.1 Mountain Lion and the 10.4 clients can't even see them on the network.
Does anyone know how to fix this?
Thanks, JimFound the answer with an Enterprise Support call from Apple, Austin, TX.
Yes, they will work with the Mtn. Lion Servers. -
Can 10.4.x clients connect to Mountain Lion Server
Has anyone used 10.4.x clients with 10.8 Server? Any issues? Does spotlight searching the shares work for the 10.4 Macs?
Thanks!Found the answer with an Enterprise Support call from Apple, Austin, TX.
Yes, they will work with the Mtn. Lion Servers. -
How to get clients connected in WMS on windows server 2008 with c# coding
Sorry to bother anyone about this question.
Can anyone knows how to retrieve amount of client connection to Windows Media Server in real time same as WMS does on server console by c# programming ?
I got logfiles of WMS in system32 directory for details but it must be off-line of all connections which will able to get those informations for doing anything,but in this case I want real time client connection
at online when a client connects to WMS that I will get amout of that client also.
I have tried to search Windows Media Service SDK to develop this on my Windows 7 OS,but I did not find that really.
Can anyone knows this,please ?
Regards,
BigBermHi SYaGCi,
Denis is right this is actually documented in the Supported Platforms Documentation:
"Windows 7 and Windows Server 2008 R2 are new platform support additions in Service Pack 3 which are only available for support on the SP3 full release install of SAP BusinessObjects Enterprise. The SP3 patch only release of SAP BusinessObjects Enterprise does not provide support for these two new platforms."
Kind regards,
John -
Can 11g client connect to 10g server?
I am very new to Oracle, so hope this isn't too basic of a question. I thought I saw something through my searches where the clients were backward compatible to older versions of the server. Will this work, 11g client connecting to a 10g server?
I have a custom windows app that uses the Oracle client to pull data from an Oracle server at another location and pushed the data into a MS-SQLExpress database for a local cache to be used during th day. I do not have the source for this custom app or the time to re-create this custom app. We just installed a new Windows 2008 R2 (64bit) server and I just need to get the client back on the new server so the custom app will work again. The old server was running 8.1.7 client, but going to 64bit OS I want to use a more current client to avoid issues with 32bit/64bit compatibility problems.
I am downloading the 11g 64bit client now, but want to make sure I'm not wasting my time and need to get a different client. Please advise.
Thanks!In general, yes, you can use a later version of the client to connect to an earlier version of the database and vice versa. But that only generally works for a few major releases. Unfortunately "10g" and "11g" are somewhat ambiguous-- both could be referring to one of two major releases.
Metalink 207303.1 is the client/server interoperability matrix. If by 11g you mean 11.2 and by 10g you mean 10.1, the 11.2 client will not work with a 10.1 database. If the client is 11.2 and the database is 10.2, it should be at least 10.2.0.2. If the client is 11.1, the database should be 10.1.0.5 or 10.2.0.2 or higher.
Justin -
Adobe Media Server pro 5 Scalabiltiy Requirements with respect to the number of clients connected
what are the hardware requirements mapped to the number of clients connected to a vritual server running on a Windows 2008 R2 Server? At what point should the scaling be done, what are the best practices? The encoding rate used is 360 Kbps.
Hi Simon
The HTTP (HDS and HLS) streaming and recording limit in Adobe Media Server 5 Starter is 10 min. You'll need to buy a serial key if you want to record/stream for longer. Also there are no limit on number of clients for HTTP.
Hope this helps.
Thanks,
Apurva -
10.4.11 Client connection issue to 10.6 server
I am moving from a 10.4 server to a 10.6 server. All the clients are 10.4.
General configuration is as follows:
- Home directories are on the server, shared via AFP.
- Setup a "Guest" computer configuration on the 10.6 server in workgroup manager
- DNS is successful for forward and reverse resolution
- Performed a bind of the client without authentication
- Kerberos is NOT enabled
- Able to authenticate successfully, but get the following message after authentication:
"You are unable to log in to user account "XXXXX" at this time.
Logging in to the account failed because an error occurred. THe home folder for the user account is located on an AFP or SMB server. Contact your system administrator for help."
I am able to successfully access the share using a local account on the client and authenticate against the user on the server.
No errors are showing in the AFP logs. No errors in the Open Directory logs that correspond to this.
Anything that can help for getting the clients connected to the new server (Mac Mini, connected to the network via ethernet)i have the same error with a 10.4 client
"Logging in to the account failed because an error occurred. THe home folder for the user account is located on an AFP or SMB server. Contact your system administrator for help."
anyone has a detailed how to to bind a 10.4 client to a 10.6 server ? 10.7, 10.6.and 10.5 clients working fine but the 10.4 client not :-(
this is for nfs:
asha:/pub /Network/Servers nfs resvport,net 0 0
daishar:/pub /Network/Servers nfs resvport,net 0 0
daishar:/home/rtomayko /Network/Servers nfs resvport,net 0 0
must i only change the "nfs" to "afp" ?
hope anyone can help me thx -
Trying to connect to a ftp server
I am able to connect to Cerberus (5.0.0.5) using the web browser or using a CoreFTP client, but I can't connect programatically using org.apache.commons.net.ftp.FTPClient.
Below is my code (this is actually using the java ftpclient through Coldfusion) :
ftpsClient = CreateObject("java","org.apache.commons.net.ftp.FTPClient").init();
ftpsClient.connect(JavaCast("string","xxx.xxx.xxx.xxx"),21);
connected = ftpsClient.isConnected();
login = ftpsClient.login(JavaCast("string","username"),JavaCast("string","password"));
This is what I see in the ftp server log file:
2011/12/13 13:47:54 [0] Client connected to Cerberus FTP Server 5.0.0.5 on 'machine'
2011/12/13 13:48:41 [1] Incoming connection request on FTP interface 0 at xxx.xxx.xxx.xxx
2011/12/13 13:48:41 [1] FTP connection request accepted from xxx.xxx.xxx.xxx
2011/12/13 13:48:45 [1] USER svc.script
2011/12/13 13:48:45 [1] 331 User svc.script, password please
At this point the Coldfusion/Java client returns "Truncated server reply". I also tried not using the login, and instead sending the user command and pass command separately like this:
userCmd = ftpsClient.sendCommand(JavaCast("string","USER" ),JavaCast("string","username" ));
But as soon as I send the "USER" command I see the above in the log file and the same reply, "Truncated server reply".
When I use the cfftp tag like this:
<cfsetting requesttimeout="1000">
<cfftp action="open" connection="ftptest" secure="false"
server="xxx.xxx.xxx.xxx" port="21"
username="username" password-"password" timeout="1000" stoponerror="true">
I receive a "java.net.ConnectException: Connection timed out: connect"
Does anyone have any ideas? Thanks much.This has been resolved.
There is a bug in the apache commons ftpclient that misinterprets /r in the welcome message. The ftp server people made a change that fixes this.
With cfftp, when I changed the server attribute on the cfftp open to the server name instead of the ip address, it started working. To me this is a bug in ColdFusion, you should be able to use the ip address.
The other thing I noticed is when you use getfile, you have to set the the failifexists attribute to "false". If you don't, it fails every time and the file has a "0" size, whether the file actually does exist. To me, another bug.
Maybe you are looking for
-
Printing concerning an older HP LaserJet 5000.
We're a design studio with 4 Mac's and have this HP printer for a longtime and love it. A real work horse and low maintenance. Two of our cpu's are running Mavericks, 2 are running 10.7.5 and the older one is still running 10.5.8. This older 10.5.8 c
-
How to display a table data on Screen having a Table control
Hi , I am new to ABAP.I would like to display a table data (Eg: ZDemo) on a screen at run time.I have defined a Table control in screen. Now I want to populate data from ZDemo to table control.How can I do that?Please help moving forward in this rega
-
Oracle Apps Custom Form, How to Filter data in the LOV
Detail Data Block I am Calling One LOV, Based on Master Block Item I want to filter data in the LOV. in the select statement SELECT * FROM MTL_SYSTEM_ITEMS WHERE ORGANIZATION_ID = :BLOCK_NAME.FIELD_NAME specified but it is showing no data found error
-
QM: How to Move material from quality stock to unrestricted stock
Hi, How to post material stock from quality to unrestricted without using 321. Regards,
-
Crosstab trouble: surpressing subcolumns somehow !?
Post Author: proliva CA Forum: Charts and Graphs Hi all! I need to put together a report with a table that looks like this: Presentations held in 2007 2006 2007 Total 1st Quarter 2nd Quarter 3rd Quarter Total Department_1 52 7 7 4 18 Department_2 26