Finding it difficult to get drivers for the DVD ROM

I'm finding it really hard to get the drivers for my DVD ROM to work. I have the Beyond 3D utilities disk for 5.1 CH... and my DVD player still won't play any of my DVDs. I've tried to find them online, still no dice. Please help, someone.

Moan Guide
what os as most windows need no drivers

Similar Messages

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

HT3986 I got a macbook pro Retina and I installed a windows 7. The problem is I can't find drivers for the Macbook pro retina hardware which work for windows 7

I got a macbook pro retina and I installed windows 7. How can I get the windows 7 drivers for the Macbook Pro Retina?

Read the Boot Camp Instructions, you have to download the drivers using Boot Camp Assistant
If you missed that I suggest that you read the instructions again.

HT1349 My Macbook Pro was stolen and I need the serial number. How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks :)

How would I find this? I need it for the police report so if I could get answers soon that would be great, thanks

Lanlani wrote:
... It there any other solution ?
Consider using this site: http://www.stolenlostfound.org/
This is Apple's official word on the subject:
Reporting a lost or stolen Apple product
If you have lost or found an Apple product, please contact your local law enforcement agency to report it. Although Apple does not have a process to track or flag lost or stolen product, you can use My Support Profile to find a list of serial numbers for items purchased or registered with your Apple ID.

How can i get windows drivers for the 2013 MacBook Pro Retina?

Hi there,
today I have installed on my late 2013 MBP retina via the Boot Camp Windows 8.1. The installation was smoothly but some drivers are not present including the wifi driver.
Through online research, I found out that in the current version of Boot Camp no drivers for the 2013 model are listed. Do you have one probably have an idea how to get it to run anyway?

For feedback from experienced users, post in the Final Cut Pro X forum here.
They should be able to offer suggestions for training.
Apple - Final Cut Pro X - Resources

Where can I find Vista 64-Bit drivers for the Satellite A100-049?

I currently run Vista Home Premium SP1 32-Bit and do so because there appears to only be 32-Bit drivers on Tosiba's website:
[http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action=search&selCategory=2&selFamily=2&selSeries= 153&selProduct=700&selOS=2]
Where can I find Vista 64-Bit drivers for the Toshiba Satellite A100-049?
Thanks

Thanks for the reply.
That's rubbish. Vista 64-bit runs fine with 2Gb and my laptop supports up to 4Gb.
We'll never move on to 64-Bit if companies don't provide drivers.
I'll look at those sites. I've had trouble installing nVidia drivers from nVidia website.
I have to use the one provided by Toshiba.
Hopefully I won't find this when trying 64-Bit. My plan is to go 64-Bit with Windows 7 so no rush just yet.
As I understand it Vista drivers will work with Windows 7.
Thankfully when I reinstalled Vista 32-Bit not long ago using an OEM from Technet I only need 2-3 drivers from Toshiba website, most of it they give to download you don't need at all.
Thanks again.
p.s - They do offer 64-Bit drivers for my network card though.

Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

Hi, I recently updated my iPhone 4 with the new OS 5. However, mid way now the laptop is not able to find the drivers for the iPhone. Please help

Please search the forums. This has been covered here extensively.

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

Drivers for the Westell 6100 modem for my DSL?

Does anyone know where I can get the proper driver for my 6100 Westell modem? I have a yellow question mark in my device manager and i keep getting a no driver found for ethernet connection message.

If you are using ethernet, no drivers for the modem are needed.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Downloaded drivers for the MS6570 do not WORK - HELP!

Hello,
I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php
and from:
http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
I appreciate any info.

I appreciate everyone's reply....
Here is what I have done.
I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
Thanks for any help again.

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

Drivers for the sunfire v20z network card.

does any one know were i could find the drivers for the sunfire v20z network card. and does anyone know the chipset of the card?

That's a software question.
This is a hardware forum.
You didn't specify, but I'll presume you are not talking about any add-on card.
The necessary software packages for the onboard
broadcom BCM5703 gigabit (bge) circuitry are native to Solaris x86 (4/04 and newer).
Therefore they'll be on your OS installation CD's.
Just install the OS and rock-n-roll.

I am looking for pre-NI-DAQ drivers for the NI 455x DSA cards.

I have inherited an older piece of production equipment, and I need to find the older drivers for the NI455x DSA card. Is there an archive directory that contains the install information for the NIDSA fp's, dll's, etc.

The NI 445x DSA cards are supported by the NI-DAQ 6.9.1 driver currently available on the web at www.ni.com and follow the downloads link. You will also want to use the NI-DSA driver to program the NI-445x board which is also available at the download site.
Some older drivers are available at the download site by choosing all Drivers instead of current.

I have several episodes of a TV show that say "download error, tap to retry" and when I do it just repeats that error message. Can I get it to work? If not can I get reimbursed for the episodes I'm missing? I'm using an iPad one which has worked fine B4

I have several episodes of a TV show where it says download error, tap to retry and when I do it repeats the error message. Can I get it to work or get reimbursed for the ones I'm missing? I'm using an iPad 1 which has worked fine for all the others.

Hi AlpineJean,
I'm sorry to hear you are having issues downloading some episodes to your iPad.
I would first suggest you sign out of your iTunes account on your iPad, restart the device and sign back in.
Settings > iTunes & App Stores > Tap on your Apple ID account > Tap Sign Out
Click on the link below for additional troubleshooting steps with more details and screenshots.
I've quoted some helpful highlights for you:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
To view or download previously purchased:
TV Shows on iOS
Open the iTunes Store on your device.
Make sure you are signed in with the same Apple ID you used for the original purchase.
Tap More from the bottom navigation bar.
Tap TV Shows.
Locate the TV show episode or series you would like to download.
Once you've located the TV shows you are looking for, tap the download button.
The TV show will begin downloading.
Previous purchases may be unavailable if they have been refunded or are no longer on the iTunes Store. Downloading previously purchased movies and TV shows requires iTunes 10.6 or later.
If this does not resolve your issue, please follow these instructions for support from the iTunes Store:
How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
Find the email receipt for your purchase.
Click Report a Problem under the app that is having the issue.
When prompted, enter the Apple ID and password you used to purchase the item, then click Report a Problem.
Click Report a Problem next to the item you are having an issue with.
From the Choose Problem dropdown menu, choose the appropriate issue.
Follow the onscreen instructions and—if prompted—type a description of the problem into the text field.
Click Submit to have your issue reviewed.
Have a great day!
- Judy

I have a message: "Could not get session for the OEM Repository."

Dear Sir,
I browsed reports that has been published in OEM. But I received an error:
"Could not get session for the OEM Repository. Check to ensure that the OEM Repository is up."
What can I do?
Thank a lot

You will need to go into your Files and locate the song. By default, iTunes saves songs in the iTunes Media Folder which can be found in the following locations:
Mac OS X: /Users/username/Music
Windows XP: \Documents and Settings\username\My Documents\My Music\
Windows Vista: \Users\username\Music\iTunes
Windows 7 and Windows 8: \Users\username\My Music\iTunes
If you locate your song file, when you try to play it in iTunes, you will be given an option to locate. Navigate to the file in the pop up window and iTunes will re-path the file location.
Most people encounter this issue when moving to a new computer or if you have your music saved on an external drive or folder that you have since moved or removed. The imperative part is finding the song so you can re-map it.

Finding it difficult to get drivers for the DVD ROM

Similar Messages

Maybe you are looking for