Finding last page in SAP Script when there are multiple layouts involved?

Hi,
I want to find out the last page in the SAP script. I have used &NEXTPAGE& = '0', this is finding the last page of a one layout however I do have three layouts in my script. I have also used the &SAPSCRIPT-JOBPAGES(3ZC)& and I have taken one counter and comapred as follows-
If &SAPSCRIPT-COUNTER_1(+)& = &SAPSCRIPT-JOBPAGES(3ZC)&
LAST PAGE.
endif.
This is also not working. Please advise if there is anyway to find out the last page from print program.
Thanks,
Jyoti

Hi,
U can do like this, Set a flag in ur driver program when u reach to print the last layout then pass this flag value to Script. In script check when this FLAG = 'X' & &NEXTPAGE& = 0 then u print the required in ur last page.
Eg:
define a FLAG in ur driver program and make the value as 'X' when it reach the last layout.
in script, write the condition like:
/: IF &FLAG& = 'X' AND &NEXTPAGE& = 0
write text.
/: ENDIF.
Hope it helps!!
Rgds,
Pavan

Similar Messages

Printing LAST page in SAP script on the back side.

Hi ,
I have a problem with the printing of the LAST page on the reverse side of the form, when done with a vendor.
At a time we print many vendors together.
So, when done with printing of a vendor it needs to print his address on last page, reverse side(address)
Next will be followed by another vendor details.
I cannot give 'D' for the first page because it would fail if the form flows more than 2 pages.
is there any way of triggering the LAST page in SAP Script when it done with printing of one vendor.
any help would be highly appreciated.
regards.

Hi ,
In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
Presently script contains THREE pages ( FIRST, NEXT, TERMS).
FIRST with attributes :
next page as NEXT , Print mode T.
NEXT with attributes :
next page as NEXT and print mode T
TERMS with attributes :
next page as ' '.
I Created 'TERMS AND CONDITION' window.For TERMS page i selected 'TERMS AND CONDITION' window only.
So page window of 'TERMS' is 'TERMS AND CONDITION' and i included standard text in 'TERMS AND CONDITION' window.
If PO contains 9 pages( that means MAIN WINDOW data flows up to 9th page with footer also ).
So i have to print standard text(Terms and conditions) back side of 9th page only not on all pages.
So total PO contians 9 pages with 10 prints.
Please help to solve the issue
Thanks and Regards
Venkata swamy

How To trigger last page in sap script of customer account statement

Hello all,
I am working on customer account statement.
It has it's own standard script(F140_CUS_STAT_02). But my client's requirement was completly diffrent,so i copied that to z script and made some changes like delete some window and some another window.
Now on first page , i have following windows,
1) Header
2) address
3) main
4) Account
5) Footer.
Next Page having following windows,
1) Header
2) Main
3) account
4) footer
Now i want to print account window on lsat page, so i put the condition nextpage = 0.
and it is working fine , but as account window is physically present after Main window , so that much blak sapge is getting creted after main window on every page.
To remove that blank space i am thinking of creting one more page and everytime i want display account window on that page.
I have creted the last page also. but in my output it not detecting that last page.
For First page - next page is next.
For Next page - next page is next.
for Last page- next page is last.
Also i have added following code at last in main window.
/: NEXT-PAGE LAST.
But i think i am placing this code at incorrect position in main window.
I am not able to find out the correct podition to put the above code,but main window of that script conataing so namy text element, and that text element are getting handled from driver program based on some conditions.
I have added my code in main window but not changed the original code.
Plz let me know where to write /: NEXT-PAGE LAST. in main window.
Or provide me some another solution to trigger thet last page in sap script.
Regards,
Anuja Dhondge

Hi ,
actually in account window i have used tha box command to print account statement.
Previously i was printing this account statement in main window itself but without using bottom and end bottom command.
So , as i made some changes or add some code in main window then lines of this account statement were getting dismental.
So my question is using bottom and end-bottom command this will happen or not????

Urgent - Not able to Print back page for Last Page in SAP Script.

Hello All,
I need to Print back page in SAP Script, I am able to do it by setting print mode as D, but now the problem is, it does not print back page for last page.
For eg. if there are 3 pages it prints back page for first two. If there is only one page then it does not print back page.
Please Help.
Thanks.

hi,
Yes, we can print logo as water mark in scripts
Just do as like this....
Upload your logo via SE78.
- Select 'Import' button from application toolbar of SE78, and perform upload.
and write this code in scripts
BITMAP 'COMPANY_LOGO' OBJECT GRAPHICS ID BMAP TYPE BCOL
regards
Sankar

How to print last page in sap script in ladscape format?

Hi all,
can any 1 tell me How to print last page in sap script in ladscape format?
Thanks In advance.
Pravin

Hi Pravin Sherkar,
we can do this in SAP Scripts.
we need to create two pages, one of landscape and another of potrait.
now after filling the data at last we need to call the page which is of format landscape using START_FORM function module.
You can use condition &PAGE& = &FORMPAGES&.
Please check this link
Printing Portrait/Landscape in sapscript
Re: Landscape and potrait in same layout?
http://www.sap-img.com/ts013.htm
Best regards,
raam

Need to print some text only in last page in SAP script

Moved to correct forum by Moderator. General wasn't right either.
Hi All.
I need to print "Remarks" only in last page of sap script.
Can anyone please help me on this.
Thanks
Senthil kumar V.
Edited by: Matt on Nov 21, 2008 7:38 AM

Hi,
you have 4 possibilities.2 at non main window, 2 at main window.
at non main window.
1. /: IF &PAGE(C)& = &SAPSCRIPT-FORMPAGES(C)&
remarks
remarks
remarks
   /: ENDIF
2, /: if &NEXTPAGE& ='0'.
remarks
remarks
remarks
   /: ENDIF
at main window
3. Add the remarks at the last item of the main which is printed
4. add a new item to your main (/E)
    put your remarks in it.
   Change your program in such a way this item will print as last one.
   like
    /E REMARKS
remarks
remarks
remarks
   and in sapscript program add logic at the end.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'REMARKS'
EXCEPTIONS
element = 1
window = 2.
I am sure this will do. Make a choice.
Gr., Frank

I don't want to print the last page of a smartform when there is no content

I don't want to print the last page of a smartform when there is no content. Kindly help

If the last page is printed, there are two possibilities
-1- The MAIN WINDOW is only in this page
-2- The page is explicitly printed from another page (new-page)
-3- There is date but its only space or skip line.
So in your form
-1- Redefine the logic of your form
-2- Check that, there are some data to be printed before calling the NEW-PAGE
-3- Do skip or write space lines before printing an actual line and not after
Regards

Last page in SAP Script

Hi All,
I have a requirement of printing terms and conditions of PO on a new page of SAP Script.
I created a new page as LAST and called it through NEW-PAGE command from MAIN window.
On my LAST page I created 1 window, which calls Standard Text.
Issue I am facing is in spite of having data of more than 1 pages , print preview is displaying only 1 page of Terms and Condtions.
Can you please let me know what am I missing?

Hi Shradda,
you also can just add an additional processing.
You know, something like
/: PERFORM 'YOUR_ROUTINE' IN PROGRAM 'YOUR_PROG'
/: ENDFORM
See here: https://help.sap.com/saphelp_crm700_ehp02/helpdata/en/4e/34f87463de02c2e10000000a15822b/content.htm?frameset=/de/4e/3663…
But in my opinion it is the best to make a copy of the original because I'm pretty sure, there will be more additional requierements in the end and just to enhance or to use this technique is very hard to understand after the second implemented spot
Can you share your stuff how you tried it?
I mean, calling two sites in a row should definitv work fine.
/: NEW-PAGE 'LAST1'
/: NEW-PAGE 'LAST2'
I tried it on my own and it works perfectly fine...
Did you gave your last-page a followpage while testing the first suggestion? That is of course a must-have.
~Florian

Adding Text to the last page in SAP Script RVORDER01

Hi Experts,
I have copied RVORDER01 and changed the log for it and added my ZRVORDER01 in NACE.
Now they want Some text to be added to the last page of the script how to do this without changing Standard Print Program ? Please guide me.
Regards,
Dheepak

Hi,
If you copied the the Standard Script to a ZScript then why is the problem adding a Text to the Last page......You should be able to do this easily .....i believe...Sorry if i misunderstood......

Print text on back side of last page in sap script

Hi All,
In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
Presently script contains two pages ( FIRST, NEXT).
FIRST with attributes :
next page as NEXT , Print mode T.
NEXT with attributes :
next page as NEXT and print mode T
Please help us in solving issue.
Thanks and Regards
Venkata Swamy

Hi ,
In Script PO i have to print 'Terms and Conditions' text only on the back side of last page of the PO.
Presently script contains THREE pages ( FIRST, NEXT, TERMS).
FIRST with attributes :
next page as NEXT , Print mode T.
NEXT with attributes :
next page as NEXT and print mode T
TERMS with attributes :
next page as ' '.
I Created 'TERMS AND CONDITION' window.For TERMS page i selected 'TERMS AND CONDITION' window only.
So page window of 'TERMS' is 'TERMS AND CONDITION' and i included standard text in 'TERMS AND CONDITION' window.
If PO contains 9 pages( that means MAIN WINDOW data flows up to 9th page with footer also ).
So i have to print standard text(Terms and conditions) back side of 9th page only not on all pages.
So total PO contians 9 pages with 10 prints.
Please help to solve the issue
Thanks and Regards
Venkata swamy

Displaying last page in SAP Script.

HI All
I have created 3 pages.
Data will be displayed in the first page and 3 page ie the last page will display a small Note.
I have a requirement in which Both First and last page should be displayed.
IF data is too long then after first the next page should get displayed and then the last page.
I tried using start_from and End_form . but the issues was not solved.
Please help.

Hi,
Please try to control the printing of First and last page based on the Internal Table contents.
Check if the internal table is empty after printing the first page and then put a if-condition in the script editor to control triggering of second page.
Then you can print the last page with instructions.
Regards,
Lakshmi

Unable to find Key Events when there are multiple Commands

Hi,
I've developed a simple J2ME Appln containing 3 commands
for ex- Exit,Help and Info(all with same priority).
As there are 3 commands, Exit command is present at the left and the other two namely Help and Info have been listed under Menu and this Menu command is presented at the right.
My MIDlet class has extened MIDlet and implemented CommandListener. Using CommandAction(), I'm able to generate action for Command press and i've also created a nested class which extends Canvas so, using keyPressed and keyReleased, I'm able to find the Key Press Events.
Now, my appln needs to find just the key press events. After i press the Menu command, the two commands namely Help and Info are listed. In tht screen, I need to find out whether any other key events are being generated but my keyPressed and keyReleased are not being called.
Please provide me solution ASAP.

I'm going to make a few assumptions:
1. The menu you're describing is the automatically generated one caused by having more than two commands.
2. The subclass of Canvas is the currently active Displayable (otherwise you won't get any key events at all).
If this is the case (and someone correct me if I'm wrong), key events are being handled by the phone's subsystem to drive the menu, which means there's no way to get them. The way I've approached this kind of problem is to create my own menu painting and handling code and incorporated it into the Canvas. Then, make one Command called 'Menu' and have it invoke your custom menu code.
I realise this isn't an ideal solution, but it's something.

Blazeds brakes when there is multiple directorys involved.

Hello guys I was wondering if anyone can help me with this issue with blazeds and tomcat
5.5 i realized this is not a flex question but the only reason I'm using blaze is for the purpose
of allowing flex to see my java classes.
if i have a directory structure of webapps/learn/WEB-INF/
my messagebroker seems to be available.
however if i do something like
webapps/learn/learn2/learn3/WEB-INF/
everything brakes. all my jars are still in the WEB-INF/lib folder and i have a web.xml there as well but yet im not able to get the broker up and running. why is that?
has anyone else ever experienced this problem?
any tips would be appreciated.
Thanks
Miguel

Hi,
U can do like this, Set a flag in ur driver program when u reach to print the last layout then pass this flag value to Script. In script check when this FLAG = 'X' & &NEXTPAGE& = 0 then u print the required in ur last page.
Eg:
define a FLAG in ur driver program and make the value as 'X' when it reach the last layout.
in script, write the condition like:
/: IF &FLAG& = 'X' AND &NEXTPAGE& = 0
write text.
/: ENDIF.
Hope it helps!!
Rgds,
Pavan

What does the Merge Data Stream processor do when there are multiple input streams to it from the same reader?

Hi,
I have a process with a reader of master data that outputs 5 records that feeds simultaneously into 3 different lookup and return processors.
Each lookup and return processor brings some data back from a detail table. There can be multiple details so I follow each lookup processor with a split records from array processor. Hence I end up with 3 'streams' of data. Stream 1 has 8 records, stream 2 has 5 records and stream 3 has 6 records.
I join all these streams to a Merge Data Streams processor.
I end up with 9 records so although the help for the Merge Data Streams processor says 'Merge Data Streams does not perform any transformation, matching, or merging of records' there is clearly some merging going on.
What is the behaviour of the merge data streams processor in this scenario?
I have added attributes and flags into each of the streams. How many records should I see and what values should the added attributes/flags have (some records show attributes/flags from all 3 streams whereas others show just those attributes/flags from one stream).
I have developed a test case simply to understand what the processor is doing but it's not obvious and furthermore it's probably unwise to develop EDQ processes where the processor behaviour is not documented and guaranteed to remain consistent. What I am trying to achieve is to bring all of a person's (the master data) various details (assignments, employers, etc.) together so we can check the data (some rules require data from multiple details).
Thanks, Nik

Cheers Mike - and for the explanation of the terms.
I think I understand now how it's supposed to work.
What I'm finding however is that when I set a flag to Y at the beginning of a path (that includes a lookup and return and then split records from array processor) that flag is showing no (i.e. an empty) value in SOME of the records shown in the subsequent MDS processor (it's fine the very last split processor before we get to the MDS but then again there are fewer records in that split processor than the MDS).
In my case there are obviously more records in the MDS processor than there were in the original reader (because the lookup and returns are configured to have unlimited maximum matches). As mentioned, the different paths return different numbers of records before being combined in the MDS. Say a reader has 5 records and path 1 returns 8 records in total including a path-specific flag (flag1, set to Y) but path 2 (that again adds its own path-specific flag (flag2, set to Y) returns just 5 records (since nothing was added from the lookups) are you saying that flag2 would show as 'Y' for all 8 records shown in the MDS?
Hopefully you would be able to see what I mean if you try to create a process like the one I've described (or I can upload a package).
Re. the purpose of the separate paths approach it is simply to allow the visualisation ('showing the working' as Neil puts it) of the different checks being carried out by the process.
This is considered one of the benefits of the tool over writing SQL queries (with outer joins, query criteria, etc.).
Also, as mentioned I was following an example that Neil put together for us to ensure that we are doing things in a 'proper' and supported way.
If we put all the lookups, etc. for all the checks into one datastream then it no longer becomes so understandable and the value of joining processors in a process over simply writing SQL becomes questionable; arguably the EDQ process in fact becomes less easy to understand than simply writing SQL.
Also, to go down this route I will need to revise the (what was previously substantially working until I revised it) processes that I have already developed.
Thanks, Nik

When there are multiple users can the email files that are on the left of the screen be hidden from other users?

There are several people who might want to use Thunderbird on a work computer but I don't like how everyone's email files are open to public view. It looks like anyone can see emails without having to login to another person's account.

Use different Windows user accounts for each person, and set-up Thunderbird for each person's email account underneath the respective Windows account.
It is very easy to switch between Windows user accounts, and multiple people can be logged in simultaneously.

Finding last page in SAP Script when there are multiple layouts involved?

Similar Messages

Maybe you are looking for