Finding movie files

The finder says I have 25 gigs of movie files. When I serch for .mov or .avi, I get just a mb's of files. How do I find the rest?

The mpg files should also be in iPhoto, and iMovie should be able to find them there.
If you open iMovie, it may ask you to allow it to generate thumbnails for iPhoto events. If so, say yes and give it some time.
There should be an Event in the Event Library called iPhoto Events, where you should be able to find all the videos from your still camera.

Similar Messages

How to find movie file from external hard drive in imovie?

i shot 29 gig of video on the road. i imported it into my macbook to the desktop. then i drag and dropped it into an external hard drive. now i have since dragged and dropped the file to my imac at home to work with it in imovie, but imovie cannot find any mpeg or any such movie file. i then tried to put it back to the canon hg10. after i plugged in the canon, i dragged the movie folder to the canon and it imported 29 gig. but the canon does not show any new movie files in the video mode. when i open import options in imovie, no new movies appear. any ideas?

For iMovie to see your file, it must be either on the internal drive, or it can also be on an external drive that is formatted as Mac OSX Extended (Journaled). (Not FAT32).
For the internal drive, your clips must be stored in a folder inside the Movies/iMovie Events/ folder.
For the external drive, your clips must be stored in a folder within the iMovie Events folder at the top level of the drive. Move your files there and then start iMovie, and it should see them.
Message was edited by: AppleMan1958

IMovie Can't Find Movie File Location

I had to reinstall the OS and all software on my MacBook Pro and after I imported the Movie files back into iPhoto, iMovie can no longer find the movie files for the projects. When I open an iMovie project, there is a yellow triangle with an exclamation point in it. How can I tweak the iMovie project file to point to the movies in the new location?

It is not the easiest thing to do, but it is possible.
Please make a backup copy of the project file before attempting brain surgery.
An imovie project file (with extension .rcproject) is a package. Right click on your Project file in the Movies/iMovie Projects folder. Select Show Package Contents.
There should be a text file in there called Project.
It will be in hexadecimal, so you need a hex-capable text editor to read it.
I would suggest BBEdit (best but $$$) or PListEditPro (free from Apple).
In this file, you may be able to see the paths and filenames for the clips used in the project.
This is where iMovie expects to find the clips.
The least risky thing to do is to move them to where iMovie thinks they should be, with the right names. However, this may impact iPhoto if you are changing the iPhoto library without telling iPHoto.
So, alternatively, you could edit the file with the new paths and or file names.

Finding .mov files in spotlight

I load my .mov files from my canon camera to iPhoto. I have a hard time searching for these videos when I go back and try to find them. I don't always remember the date to go look in iphoto for when the video was taken. If I want to pull up all .MOV files how do I do that? I tried spotlight and it doesn't display my .MOV files for some reason. Any help would be much appreciated! Thank you!

You may want to try creating a smart folder with all your computers .MOV files in it that way you will always have them in one place.
To create a smart folder:
Mountain Lion: http://support.apple.com/kb/PH11021
Lion: http://support.apple.com/kb/PH4158

Logic is unable to find movie file

I have tried "everything", but Logic won't load my score. I imported a movie file from FCP and since it was a reference movie, the render files are gone (I've edited the film in FCP since). Now in Logic, it is trying to find those render files...they're gone. So how do I get around this. How do I tell Logic to forget that video file so I can import the new one? This is a ridiculous issue! Thanks for your help.

Pixelkid wrote:
I have tried "everything", but Logic won't load my score. I imported a movie file from FCP and since it was a reference movie, the render files are gone (I've edited the film in FCP since). Now in Logic, it is trying to find those render files...they're gone. So how do I get around this. How do I tell Logic to forget that video file so I can import the new one? This is a ridiculous issue! Thanks for your help.
Sorry to break the news to ya, but it's not an issue or even a ridiculous one. You deleted the files, so it's down to pilot error. Now, here are a few things you can do to remedy the situation...
*Suggestion 1* -- create a dummy movie. Length, content, doesn't matter. Give that movie exactly the same name as the original and put it in exactly the same location as where the original movie lived. Then try and load your session. Logic's not going to know the difference between the original file and that one, so it should load.
*Suggestion 2* -- launch Logic and hold down the CNTRL key while it launches. You'll get a message asking if you want to run CoreAudio. Say "no". Then try and load your file.
Or... if you have Logic up and running already, turn off CoreAudio in your prefs. Then try and load the file. Once it's loaded up, delete the movie from within Logic.
*Suggestion 3* -- find a copy of the original files in your backups. Restore them to their original location, including the proxy (reference) movie file.

Is it possible to find movie files in your quicktime cache

when I had a pc years ago, I was able to find vieo files in my cache, is that possible, say for instance I view a quicktime file online, will that file be in my quicktime cache?..and if so, how do I acces it....without having to go back to the site?

QuickTime Player has a "recently viewed" list (if the link was opened by the Player and not the browser plug-in).
New to QuickTime 7 is a browser caching option that lets each user set the "size" of this cache. Sys Prefs/QuickTime/Browser and set the size.
You can then "Favorite" those same cached files and view them "offline".

Is it a bug -- can't find movie file data "expo-3" ???

I am having a problem with the new iLife 06 suite though I believe this relates back to Tiger. After installation, I launched Garageband and received the below message. The same thing happens while opening a QT-file with FCE. Both applications are telling me that
"the movie-file data "expo-3" cannot be found, without this file the app cannot play properly"
I really don't know where this came from, but it appeared after the installation. Repaired permissions and restarted but still maintaining this problem. Any idea?
H

I am assuming that this may be fixed in the next upgrade, right?!

Where can I find movie files in iDVD?

Hello,
So, I have lost a quicktime movie file that I made in iMovie and cannot locate the file anywhere on my HD. However, when I open the iDVD Project (iDVD 7.1.2) I made to make a DVD the movie plays fine inside of the project. Does this mean the movie file still exists on my Hard Drive somewhere? Is there any way to access the file? I have looked in the Movies Library in iDVD and it is not there! Thoughts?
Thanks,
John

It will be located inside the iDVD project package under
However, they will not have any of the audio associated with the video. And the extension will have to be changed to .mov but again with no sound.
For future projects is you save the project as an archived project file
all of the media files, photo, video, etc., that are used in the project will be copied into the project file in the Assets folder:
OT

Can't find movie files that are eating up my memory

I have a MacBook Pro (Retina, 13 inch, Late 2012) and last week I kept getting notifications that my memory was almost full so I checked out "Storage" under "About this Mac" and it showed that about 120 GB were being taken up by movies. I removed all the videos from my Mac and removed all my files from iPhoto, adjusted search criteria in Finder for movies, and emptied the trash and restarted my computer several times. Now it shows that I have 113 GB of movies and I can't find out where these alleged files are. Any suggestions on how to deal with this? Do I need to reformat my computer?

Seven ways to free up drive space
Where did my Disk Space go?
Slimming your hard drive
OmniDiskSweeper is a free utility that checks HD space.
FreeSpacecost $1 or is a free utility that checks HD space.
SpaceControlis a free utility that checks HD space.
FreeSpacecost $.99 - FreeSpace shows you how much space is available on all local, connected, and network drives with a single click.

Find & Move files based on csv headers

Hi Everyone,
Basically, I am trying to find locations for those files listed in a csv file. Content of the csv file is shown below:
Name,
filename1.xlsx,
filename2.xlsx,
filename3.xlsx,
And this is my code but I couldn't get it to work!!
$csv=import-csv c:\input.csv
Get-ChildItem -Recurse | Select-Object name, PSPath | where {$_.name -match $cvs.name} | Export-csv c:\output.csv
This code will find files if I replace $cvs.name with a string, I am not very at scripting and hoping anyone who is experienced in PowerShell could provide some advices! Any opinion is appreciated!! Thank you!!

Try this:
$csv = (Import-Csv "c:\input.csv").name
Get-ChildItem -Path ".\*" -Recurse -Force -File -Include $csv |
Select-Object Name, FullName |
Export-csv "c:\output.csv" -NoTypeInformation
Changed items from posted code:
Quoted file path in Import-Csv and Export-Csv statements - best practice
Selected .name property at the $csv assignment line
Use additional paramters in the Get-ChilItem cmdlet to filter on the file names in the $csv variable
Picked FullName instead of PSPath in the Select statement
Variable name was misspelled in the Where statement, but the entire statement has been removed
Removed Type Information from Export-Csv statement
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Can't find movie files

I have two questions that I need help with:
1) I've read some posts that say my iTunes movies should be in: Username > Music > iTunes > iTunes Media > Movies. But when I follow that thread, there isn't a folder named "iTunes Media". Would it be someplace else?
2) I created a folder called "Movies" in: Username > Movies. I store all my m4v movies there that I watch on iTunes. If I were to save this folder to an external HD and delete the folder on my Macbook, would the movies still show up in iTunes?

Seven ways to free up drive space
Where did my Disk Space go?
Slimming your hard drive
OmniDiskSweeper is a free utility that checks HD space.
FreeSpacecost $1 or is a free utility that checks HD space.
SpaceControlis a free utility that checks HD space.
FreeSpacecost $.99 - FreeSpace shows you how much space is available on all local, connected, and network drives with a single click.

Move Files By FileName

I have a load of files that are desposited on my user desktop via ftp. Each of these files begins with the same six letters. It is a pain to select all of the files manually and then pull them into a folder. I have looked extensively and have tried unsuccessfully to create an applescript that will accomplish the following action:
Take the files with fileNames containing "XXXXX" (or beginning with "XXXXX") at "mac HD:user:me" and move them to the folder "XXXXX" at "mac HD:user:me."
These files all end with the same extension, so I could also delimit the files to be moved by using their extension, if that is a better solution.
Lastly, it would be great if I could also set the above action to occur automatically at some interval.
I can't imagine that prescribing the above sort of action is difficult via applescript, but I must admit that a solution eludes me. If someone happens to have a script that accomplishes this sort of action that they might share, please let me know.
Thanks

Twtwtw is right: there should never be a colon in any file name!
I've put four JPEG files on my desktop, sequentially named “XXXX# - 20130410s132159265.jpg”, “XXXX# - 20130410s132159266.jpg”, “XXXX# - 20130410s132159267.jpg” and “XXXX# - 20130410s132159268.jpg” (but without any colon in their names). Then I created a folder named “XXXX” in my home folder. Then I run the following script:
set theDestinationFolder to POSIX file "/users/pierre/XXXX" as alias
tell application "Finder"
move (files of desktop whose name begins with "XXXX") to theDestinationFolder
end tell
The four files were properly moved to the destination folder, while the following result was displayed in the AppleScript Editor Result panel:
{document file "XXXX# - 20130410s132159265.jpg" of folder "XXXX" of folder "pierre" of folder "Users" of startup disk of application "Finder", document file "XXXX# - 20130410s132159266.jpg" of folder "XXXX" of folder "pierre" of folder "Users" of startup disk of application "Finder", document file "XXXX# - 20130410s132159267.jpg" of folder "XXXX" of folder "pierre" of folder "Users" of startup disk of application "Finder", document file "XXXX# - 20130410s132159268.jpg" of folder "XXXX" of folder "pierre" of folder "Users" of startup disk of application "Finder"}

Move all my music to another folder but Itunes can't find the files!

I have all my music on my desktop in small folders for each artist.
But now i don't have room anymore, because i have to much music.
So i want to move it all in to a folder called "Music". But when i do that
Itunes can't find the files, and i have to search for each file, to find the new location instead of the desktop. How do i move my music more easily? So i don't have to synchronize it all in again, with the right album covers and that..
Please, need some help here!

You need to open your preferences file in iTunes and click on advance then select the location of where you put the folder. http://support.apple.com/kb/HT4527

How do I find the codec used for a .mov file?

I have a .mov file from 2001 that I can't play. How do I find the correct codec to use for this. Is there somewhere in the file itself some kind of reference to the codec used? I've installed pretty much everything I could find in terms of codecs. I don't care whether on mac or windows. Just need the right codec.
Thorbjørn Vynne

Still no luck
If anybody out there wanna give it a try please download this clip
http://mhp.tv2nord-digital.dk/fileadmin/resources/thor/dv-00.27.04.11-V180.mov
If you can play it please please let me know with which codec.... I have a whole bunch of files with this codec I need to use
Best regards
Thorbjørn

SSIS File System Task Move File Could not find part of the path error

Hi All,
I am getting error in production when try to move files from one folder to another folder. But on Dev environment working fine.
An error occurred with the following error message: "Could not find a part of the path 'C:\Archive\ABC.txt'
My package configuration details.
1) For Each loop Container
Prop’s:
Enumerator: For Each File Enumerator
Folder: C:\
Files: *.txt
Retrieve File name --> Fully qualified
In Tab Variable mapping: User::name --0
2) File System task
Props:
Destination Connection: c:\archive\
Overwrite destination: True
Operation: Move file
Is Source Path Variable: True
Source Variable: User::name
Please share your suggestions on this.
Regards,
Vaishu

Hi Vaishu ,
Try below links :
http://www.allaboutmssql.com/2012/09/sql-server-integration-services-rename.html
http://social.technet.microsoft.com/wiki/contents/articles/18776.ssis-move-a-folder-from-one-drive-to-another-drive-using-the-file-system-task.aspx
sathya - www.allaboutmssql.com ** Mark as answered if my post solved your problem and Vote as helpful if my post was useful **.

Finding movie files

Similar Messages

Maybe you are looking for