Finding number of entries between value "x" & value "y"

I'm trying to count the entries in a range that are greater than 2.0 but less than 5.0. I'm not having any luck getting the syntax correct.
Would it be something like: =Count (B1:B95)-Countif(B1:B95),"<2.0"-Countif(B1:B95),">5.0 ?
Kristy

KK,
Let's assume that all you have in column B is the list, because that makes the expression less complicated. If you have other stuff in column B that you don't want included in the count, you can add the row range specification.
This expression will do the conditional count:
=COUNTIFS(B, ">2", B, "<5")
Regards,
Jerry

Similar Messages

Count the number of records between two key values (BTREE)

How can I count the number of keys between two values?
I'm using python driver, and BTREE access method.
====>
ideally what I want is to average a whole time-series data set (the intervals can change) to a given number of points. The keys are the time stamps and the values are the data that needs to be averaged. I need to count the number of records between two time stamps so that I can divide that number by the number of points i need, and average the data. What is the best way to do this? Or should I just keep the intervals for the time stamp constant and use RECNO access method?
Thank you
(first post btw.. and why aren't there many people in stackoverflow who answer Berkeley DB questions?)

BDB is an embedded db and it does not have any internal counters or statistics that you could grap to use for this. You will need to do it manually.
You can create a cursor, grap the records you want, each time you get the next record you bump a counter.
If you are using RECNO, you can use a cursor to get the record number of the record (DB_GET_RECNO), and if all you data is in
sequentail records with no missing records you can figure out the total count by take last rec # - initial rec # + 1 to get a total count.
If you switch over to the SQL API, you can issue a SQL query to give you a count. Select count(*) Where .......
Since you have to grab the data anyway, then best may be to count records as you go along.
thanks
mike

Cant' find number values on the color wheel

I've been given numbers for a specific background color but
can't find how to bring the values visable on the color wheel
in Keynote 4.04
I'm sure I'v e seen them before or not?
Thanks.
Kevin
Blue: c-100% m-72% Y-0% K-18%; R-0 G-73 B-144; PMS 293; Hex: #004990

Change from the colour wheel to RGB sliders and enter the RGB values you have been given.

How to find out Number of entries in a Huge Table?

Hi,
I would like to know Number of entries in table DFKKOP. when i try to get it through se16, it takes more than 10 minutes in dialogue process so a time out occurs. is there any way to find out number of entries in the table Apart from creating a program for that?
Please guide me to the solution.
Thanks,
Lijo Joseph
Message was edited by: Lijo Joseph Vazhappilly

REPORT YCHATEST                                .
Data : begin of itab occurs 0.
        include structure tab512.
data:end of itab.
data : v_count like sy-index,
       tabname like X030L-TABNAME value 'DFKKOP'.
CALL FUNCTION 'RFC_GET_TABLE_ENTRIES'
EXPORTING
    table_name              = tabname
IMPORTING
   NUMBER_OF_ENTRIES       = v_count
tables
   entries                 = itab.
write : v_count.
Message was edited by: Sekhar

Where could we find the CT and PT values for Particular Device ???

I 'm facing a scenario in a report i need to place a field device number and assosiated CT's and PT's .
where could we find the CT and PT values for Particular Device ??? basically im MM consultant   we don't ahave DM consultant please help with this issue???
means actually i got the table and field details for transformation ratio (or) CT/PT ratio
                      ETYP_UEBERVER. from the screen EG03 , t-code
                        but im not sure   this is the exact field that i require ....
can any one help ....   i will be very thankfull to your solution inadvance....

The transformation ratio are the attributes of a "Winding Group". Find winding group of a device and then you'll get the desired information.

Error: ORA-01722: invalid number performing List of Values query.

when i created a cascading select list, For the first time it worked properly then little later
it is giving this error.
Error: ORA-01722: invalid number performing List of Values query: "select distinct cl_name d, cl_no r from Kclient where gr_no = :P1_GRNO order by 1
could any one please solve the problem?
2. when i run the application. in all the items edit button is automatically seen
including in the login screen.
could any one identify what is the error and give me a solution.

Is this better?
select DISTINCT FIRST_NAME||' '||LAST_NAME display_value
      , ROW_ID return_value
from "PSA_RESOURCE_MANAGER"
where PSA_RESOURCE_MANAGER.ACTIVE_FLAG='Y'
   AND :P117_REPORTING_MANAGER = PSA_RESOURCE_MANAGER.REPORTING_MANAGER
   AND :P117_REPORTING_MANAGER <> -1 order by 1or
select DISTINCT FIRST_NAME||' '||LAST_NAME display_value
      , ROW_ID return_value
from "PSA_RESOURCE_MANAGER"
where PSA_RESOURCE_MANAGER.ACTIVE_FLAG='Y'
   AND :P117_REPORTING_MANAGER = PSA_RESOURCE_MANAGER.REPORTING_MANAGER
   AND :P117_REPORTING_MANAGER != '-1' order by 1Is ROW_ID a column in your table by the way? If not, you should use ROWID (without the underscore)

ORA-01722: invalid number performing List of Values query

I have a situation here where I want to pass string value(available in search field) to POP up key LOV on another page as default value.
I passed item value in default field in POPup key LOV item.I am able to see string value but It also gave me following error.
Error: ORA-01722: invalid number performing List of Values query: "select CUSTOMER_NAME, CUSTOMER_ID from (select customer_name, customer_id from hed_customers) wwvlovinlineviewname where CUSTOMER_ID = :WWV_LOV_RETURN_KEY_UTIL_1111".
Without Default value, it work like champ.
Please suggest how to get rid of this error
Thanks in advance

I hit the same problem.
The thing is that, in APEX, a 'null' value in a form is not really null but gets passed on as '%'.
When that gets compared to a number, 01722 will occur.
A workaround is to define a 'value if null' that is an implicit number, like '-1'.
And lets hope no one ever uses that as a real ID...
Cheers
Peter

How to find out the max/min value of one field corresponding to a second field in HANA through graphical way.

Hi,
I am trying to find out the latest delivery date(EINDT) for each purchasing document (EBELN) through graphical way.
The view contains other fields apart from the above mentioned two fields.
When only the two fields (EBELN, EINDT) are there, then in semantics, I can select 'Max' as aggregation to get the maximum value for each document.
If I do like this, then I need to join more than 3 views and also so many joins in calculation view. Taking so much time for data preview.
Hence , please help me in getting the solution while the view contains other fields also.
Thanks in advance.
Thanks,
Jyothirmayi

Hi Sreehari/Vinoth,
Thank you for your replies.
if only two fields are then I can get the max/min values of one field corresponding to other field.
But more than two fields are there with different values, then let me know how to find out the max/min value of a particular filed corresponding to the 2nd field with other fields also should be in the output.
I hope you understood my issue.Please revert in case of questions.
Thanks & Regards,
Jyothirmayi

Difference between value and binding ?

hello
I am afraid I am not clear on difference between value and binding of a component?
I will appreciate if you supply an explanation.
kind regards

Binding? Aren't you talking about JSF? That term doesn't occur in JSP world.

How to maintain space between value and base unit of measure in sapscript

Hi Guys,
I am working on an upgradtion project, i have problem like while upgrading from 4.6b to 5.0. i need to main a space between value and base unit of measure. can anyone letme know how to maintain in the form. I mean in sapscript.
Thanks,
Yogesh

There are a couple of ways to handle this, if you need a bigger space between, you can use tabs in the paragraph format. Or you can just write the space in between the fields like so.
ZA &MSEG-MENGE& &MSEG-MEINS&
Regards,
RIch Heilman

Non Cat Requisition gives error: "contract number - select a valid value"

Hi Guys
I wonder if you can help me please. After we've loaded these 3 patches:(7427952,6987692,6813613) when we create a NonCatalog Requisition and select a contract number with less than 4 characters, we get the following error: "contract number - select a valid value". But when we select a contract with more than 4 characters, it works fine. So in other words, it only takes contracts with 4 or more characters. Has anyone encountered this problem? Something has been changed by the patches, but we can't figure out what exactly. Any help would be appreciated.
Thanks

Hi,
Review the following note, it may be helpful.
Note: 756376.1 - Error: 'Select A Valid Value' When Adding a Section to a Contract Template
https://metalink2.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=756376.1
Regards,
Hussein

SQL for finding chunk or no keyboard values

Hi all ,
I have table where users are allowed to enter data from excel sheet but while viewing it in application due to non key board values are like ¶,     ã, £
the validation getting failed and values are not loaded kindly help me in finding those non key board values , as data has been already loaded i need to find the data with non key board values .
i have written the query for one values but i need to find it for all the other values which are not part of key board
select * from note where text like '%'|| chr(1) ||'%';

879380 wrote:
Hi all ,
I have table where users are allowed to enter data from excel sheet but while viewing it in application due to non key board values are like ¶,     ã, £
the validation getting failed and values are not loaded kindly help me in finding those non key board values , as data has been already loaded i need to find the data with non key board values .
SELECT REGEXP_REPLACE
          (column_name,
           '[qwertyuiopasdfghjklzxcvbnm QWERTYUIOPASDFGHJKLZXCVBNM ,./?;:''"{}1234567890=!@#$%^&*()_+\|`~-]+'
          ) non_keyborad_symbol_exists
FROM table_name ;
Cheers!

Reporting on between values

Hello,
I am trying to create a report that reports on all contacts that have a post code between 3000 - 3005 but the list goes on to include about another 100 values 3008 - 3015 ect.
I have tried to create a report using the between function and coping and pasting the formula to create the next between value but this is not working and it is take along time to create. I don't believe there is any between value SQL that can be run as you can only do two values in SQL.
Can anyone offer a solutions to display all contact that have a postal code of between 3000 - 3005; 3008-3010; 3105-3109 etc?

Alex,
Thats what i was going to do and then it comes up with this error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46036] Internal Assertion: Condition !pConjunct->IsAndCond(), file .\Src\SQORToCNF.cpp, line 46. (HY000)
SQL Issued: SELECT Contact."Contact Furigana First Name" saw_0, Contact."External ID" saw_1, Contact."Contact First Name" saw_2, Contact."Contact Last Name" saw_3, "- Contact Custom Attributes".TEXT_31 saw_4, Contact."Email Address" saw_5, "- Contact Address - Extended"."Address 1- Extended" saw_6, "- Contact Address - Extended"."Address 2 - Extended" saw_7, "- Contact Address - Extended"."Address 3 - Extended" saw_8, "- Contact Address - Extended"."City - Extended" saw_9, "- Contact Address - Extended"."Province - Extended" saw_10, "- Contact Address - Extended"."Zip Code - Extended" saw_11 FROM "Contact Lists" WHERE ("- Contact Address - Extended"."Province - Extended" = 'VIC') AND ("- Contact Custom Attributes".INDEXED_PICK_0 NOT IN ('Do not contact', 'Inactive')) AND ((Contact.Type <> 'Investor') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3000' AND '3005') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3007' AND '3009') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '8000' AND '8399') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '8502' AND '8505') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3022' AND '3036') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3039' AND '3050') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3052' AND '3073') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3077' AND '3078') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3080' AND '3083') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3086' AND '3100') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3335' AND '3341') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3425' AND '3443') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3750' AND '3751') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '3753' AND '3764') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '8401' AND '8403') OR ("- Contact Address - Extended"."Zip Code - Extended" BETWEEN '8417' AND '8424')) ORDER BY saw_0, saw_1, saw_2, saw_3, saw_4, saw_5, saw_6, saw_7, saw_8, saw_9, saw_10, saw_11

User Entry/Default value

Hi Experts,
In my query i am having a User Entry/default value for characteristic variable.When i run the report for a particular value the data is not shown but if i run the report with out an entry then the data is shown for that value.
User entry/Default variable is blocking the data?
Can somebody give me an idea where lies the problem?

Hi Venkat,
Details:
Processing type: User entry/Default value
Default value: -
(blank)
Type of variable:Characteristic Value
Variable represents: selection Option..
Where can i check if problem is with variable or not?

Searching for the number in the bigint value...

HI!
Could anybody help me with the searching for the number in the bigint value. ex:
9567423742840 i need to get only the 2nd and 3rd number (56) from this value...
^^
and the same thing with symbols in the strings..
is there any special function in jsp available for that?
thanks

try looking into the String class. There should be a substring or similar function that lets u get only a part of another string. You can convert the int into a string by doing something like new Integer(yourIntValue).toString() and then using that string for your substring function. There may be other ways to do it too, but this is the one I remember off the top of my head.
Hope it helps
package com.DJ_Java;

Finding number of entries between value "x" & value "y"

Similar Messages

Maybe you are looking for