Finding Old Version of PC Suite
After trying the last two updates, I have had nothing but issues that are similar to problems alreay mentioned and have not been sorted.
So my question is, where can I find an older version to try so I can get it working again.
Thx
Paul
Text Message Editor seems to store some data to folder C:\Documents and Settings\username\Application Data\PC Suite\. There might be few folders here with name like 453756347647. You can try this:
1. disconnect your phone
2. delete or move those 57894353478 folders to somewhere else
3. reboot your computer
4. Connect your phone again and start Text Message Editor.
Does it work now?
Similar Messages
-
Finding old versions of PC Suite
Hi all,
I recently got a Nokia 6100 phone and was looking for an older PC Suite version. After a thorough search on both this site and three search engines, I'm asking.
I have Windows 98 SE. PC Suite 5.8 says it "cannot install, old OS version" or words to that effect. My computer meets ALL the listed requirements, but Nokia failed to build its software properly.
where I can find an older version? I want a version of PC Suite that WILL install in Windows 98 SE.
Also, has anyone tried using an older version of PC Suite with newer phones (even if yours isnt' a 6100)? Is the software ubiquitous, or is Nokia deliberately making phone and PC software incompatible (ie. conspiring with microshaft), forcing users into software they don't want? I've heard the horror stories about PC ConcreteSuite being unremovable and other problems.
Before anyone responds to this, take note:
1) "It installs on my computer" is a stupid response. Don't say it. The discussion here is PC Suite's failure to install on *my* machine, not any "success" on yours. After looking around this "forum" for ten minutes, I lost count of how many times I saw it.
2) "Buy a new operating system" is equally stupid...unless you're sending me the money to buy a new OS and computer, of course. If you are not sending me money, don't say it.
3) As stated above, my computer DOES meet all of Nokia's listed requirements for PC Suite 5.8. I say it again because I've lost count of people who don't pay attention, even when they're told the same thing twice.
Any help would be appreciated.
EDIT: Removed email addressMessage Edited by serenity on 27-Feb-2007
04:23 PMText Message Editor seems to store some data to folder C:\Documents and Settings\username\Application Data\PC Suite\. There might be few folders here with name like 453756347647. You can try this:
1. disconnect your phone
2. delete or move those 57894353478 folders to somewhere else
3. reboot your computer
4. Connect your phone again and start Text Message Editor.
Does it work now? -
I have an old version Adobe Creative Suite 3 Design Premium. I uninstalled it from my old computer and was trying to install it on my new computer. It copied all the files but I cant open them and it doesn't ask me for my registration info, which I have. What shall I do to get Adobe up and running?
when you were install your cs3 you should have been prompted for you serial number. were you?
if not, you probably didn't properly install cs3. copying/migrating/moving etc is problematic.
if yes, did you see any error messages during installation?
if yes, attach a screenshot of the error message.
if not, check you install logs, Troubleshoot with install logs | CS5, CS5.5, CS6, CC -
Where can I find old version for ipad
cuz my ipad is not update,
i want to use old version.
where can i find it?Apple does not distribute older versions of apps. They are not available from the App store and you cannot install apps from other sources unless you are a developer. If previously had an older version in a backup you can restore an older version from your backup.
-
As a web developer, where can I find old versions (3.0.x) of Firefox?
I need to find older versions of Firefox for testing purposes. In particular, version 3.0.5.
All release versions of Firefox are available from [ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/]
-
Old versions of Pc Suite ? help
Hi im Jay and my Q: is what version of Pc Suite would work with eaither
Fedora 9 and or Window's Xp pro [SP1](build 2600.xpsp2/030422-1633ervice Pack 1)
" Not willing to update to Sp2,Sp3 "
any one know of any versions that worked with sp1 ?
or is it a lost cuase ?
Message Edited by mef13 on 17-Sep-2008 04:56 AM
Owner of a Nokia 5310 Music Xpress
Thays should put a Warning on this phone Will break in a month .It's a lost cause, PC suite has needed SP2 on XP for ages now. At least the last 6 versions required it.
Just update to SP2 or SP3 it's always been a painless problem free update on the many PC's i've done it on. Both are way better than SP1!
There isn't a version for fedora 9 or any other linux distro.
Message Edited by psychomania on 17-Sep-2008 09:38 AM -
Do I need to uninstall old versions of creative suite
i have all my previous versions of creative suite still in my system. should i uninstall them every time i upgrade?
No need. They can happily co-exist on your hard drive since they all install into their own separate folders.
It's entirely up to you if you want to uninstall them. -
6.0 is horrible where can you find old versions to download
If you are planning on downloading this DON'T! wait for a new version this is full of bugs and i can't even use my itunes right now because it is so buggy. i have unloaded quicktime, loaded the standalone and they didn't work. i have unloaded itunes and quicktime and reladed both several times and still didn't work. i don't know what to do.
does anyone know where i can find the download for old itunes for windows versions?Hey Parker, don't give up ...
Here is a post that I added two weeks ago. It includes a solution that worked for me. I hope that it works for you! Good luck.
Hey troubled Podheads,
I was one of the legion with problems in downloading iTunes6 and QT7 for Windows until I tried something (I must say that I am not a pc wizard and I don't know the technical reasons for why the following worked, it just did! So if there are any pc geeks out there, be sure to chime in). Anyway, this is what I did. First uninstall QuickTime if you do have it on your pc. If not, just go to the next step:
Go to START, then RUN. Type in regedit and then click OK. Your REGISTRY EDITOR should open. You should see HKEYLOCALMACHINE in the scroll down menu on the left, with a small box to its left. Make sure that the inside of the box has a negative sign - this will open up the next set of subfolders. Next, make sure that the subfolder, SOFTWARE, has a negative sign in the small box to its left. Next, make sure that there is a negative sign in the box next to the subfolder entitled, Apple Computer, Inc. You'll see at least three subfolders: iPod, iTunes and QuickTime. Click once on the QuickTime folder until it is highlighted and then delete it. You will be asked if you want to delete QuickTime and its subfolders. Click ok and then close out the Registry Editor.
Next, download the stand alone QuickTime 7 at this link (you may have to cut and paste this link to open this website):
http://www.apple.com/quicktime/download/standalone.html
When you download the stand alone QT7, you may get a couple of error messages (I did), but if you repeatedly click ok (like I did), the QT7 player should load with no problems.
Again, I am no pc geek, but this worked for me and I have gained access to iTunes6 (with video capacity) and my complete library is intact. Nothing like trial and error!! Good luck -- I hope this works for all of you frustrated Podheads out there! -
Where can I find 'old' version of ATI catalyst 8.11
I think I'm not the only person who can't use the current version of catalyst with arch64 (2.6.28 kernel).
It starts first time but on repeat starting it gives black screen and I can only reboot by log in with ssh.
The previous vesion of catalyst worked.
I tried to install 8.11 from the ATI page without success. The beta version 9.1 installs but server doesn't start (error, no screen found).
To my knowlege, the vesa driver can't be used with dual head setting, so an old catalyst version is my last hope. I couln't find a arch server which still hols the old package. Can anyone help me here ?.
Many thanks
frHi I was not able to rebuild PKGBUILD for 8.11 (i'm just a user). However here my intrem (hopefully ) silution:
First I start fluxbox via startx.
After exit X I have to
rm .Xauthority
sudo cp /etc/ati/amdpcsdb.default /etc/ati/amdpcsdb
With those steps I can restart X
I don't know what the steps do and I do not know if this can be automated (running whenever X is closed down).
Maybe someone can help here and knows why this method works ?
O'm on arch x86_64, kernel 2.6.28 with a HIS radeon 4650 card -
Downgrade to iTunes 7 - where can I find old version?
Upon upgrading to iTunes8, I can no longer stream music to my AirPort Express or access the store or podcasts. The support center was no help. They suggested that I downgrade to iTunes7, except that I can't seem to find it anywhere.
Does anyone know where I can download iTunes 7?You'll get a variety of earlier versions of iTunes here: Old iTunes for Mac
-
Would like to find old versions of notes saved in the notes app. Does any one know how to do this?
I am trying to find some information that was in one of the notes that I have stored on iCloud. My notes are ever growing and I would like to retrieve some of the earlier information that I wrote. Can anyone help?
Retrieve old notes from your backup
-
Trying to find old version of pocketmac
Hi
I use a mac that runs 10.3.9. I have been happily using pocketmac for ages but today it kept carashing so i decided to uninstall it and reinstall.
Only to discover that blackberry are now only offering pocketmac version 4 which is not compatiblewith OS X 10.3.9.
How can I get hold of the older version of pocketmac?
THanksSee Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
-
Libgcrypt - how to find old version?
Hello.
I`m trying to install libgcrypt.so.11. But all packagesI found had libgcrypt.so, libgcrypt.so.20 or libgcrypt.so.0.11.
How can I install libgcrypt.so.11?Surprisingly, it was on my system :? Try installing it from the AUR
ewaller$@$odin ~ 1014 %locate libgcrypt.so
/usr/lib/libgcrypt.so
/usr/lib/libgcrypt.so.11
/usr/lib/libgcrypt.so.11.8.2
/usr/lib/libgcrypt.so.20
/usr/lib/libgcrypt.so.20.0.2
/usr/lib32/libgcrypt.so
/usr/lib32/libgcrypt.so.20
/usr/lib32/libgcrypt.so.20.0.2
ewaller$@$odin ~ 1015 %pacman -Qo /usr/lib/libgcrypt.so.11
/usr/lib/libgcrypt.so.11 is owned by libgcrypt15 1.5.3-1
ewaller$@$odin ~ 1016 %packer -Ss libgcrypt15
aur/libgcrypt15 1.5.4-3 (370)
General purpose cryptographic library based on the code from GnuPG
aur/lib32-libgcrypt15 1.5.3-2 (11)
General purpose cryptographic library based on the code from GnuPG (32-bit)
ewaller$@$odin ~ 1017 % -
Running old version of OS X Tiger. I was prompted to update Firefox to 3.6. When I did there was also a Prompt to Update to 4.0 thought what the heck get the latest version. Installed it and it wouldn't run. I want to go back but can't find old version. I need Firefox! Safai can't do it all! Please Help
You can get Firefox 3.6.16 from http://www.mozilla.com/en-US/firefox/all-older.html
-
Which version of PC suite should I use to copy all...
I have an old Nokia 6610 which is on its last legs. There are about 130 text messages stored on the phone itself, in various subfolders within "My folders", one message in the Archive folder, and about 8 messages in the Inbox (the Inbox messages are stored on the SIM card - Vodafone Pay As You Go). I also have 14 pictures stored in a "Pics" folder in the Gallery. All my Phone book entries are stored on the SIM card. The text message memory is virtually full, and I often have to delete existing messages before new ones will arrive.
My computer is a Power Mac G4 running Mac OS X 10.4.11. For those that are interested, it's this model here:
http://www.everymac.com/systems/apple/powermac_g4/stats/powermac_g4_1.25_dp_mdd.html
On the Mac I have Microsoft Virtual PC 7.0.2 which runs a copy of Windows 2000 (5.0.0.2195 Service Pack 4) under emulation.
I have a fake/third party DKU-2 cable which came with a CD which contains the installer "Nokia_Conn_Cable_Driver_150_2_eng.exe" and the installer for PC suite 6.6.
Many months ago I ran the "Nokia_Conn_Cable_Driver_150_2_eng.exe" installer (within the Windows 2000 Virtual Machine) and also installed the latest Windows 2000 compatible version of PC Suite that I could find at the time - 6.86 (the installer file is called Nokia_PC_Suite_rel_6_86_9_3_eng_web.exe).
The software installed successfully, and it seemed to detect the phone via the DKU-2 cable, but I wasn't able to access any of the information on the phone. This isn't really surprising, given that the phone wasn't really directly connected to Windows - it was going via a Mac USB 1.1 port, masquerading as a port on the "PC".
What I am wondering is what software do I need to use so that I can copy all the text messages from the phone (& the 14 pictures too if possible) to my computer, preferably with the sender names & folder structure intact, so that when I buy a new Nokia phone, I can copy them all to it? I've not decided on which new Nokia to buy yet. It might be the N95 8GB, the N96, or perhaps just a basic model. It will be a current model though, not a second hand one.
My first choice would be to use software that was Mac native, but I'm not sure if there is any that would do the job. My second choice would be for software that could run on the Windows 2000 Virtual Machine. If neither of these options are possible, I could borrow my Dad's 6 month old PC laptop, which runs Windows Vista Home Premium, and use that.
If anyone has any experience/thoughts on this, I'd greatly appreciate their (detailed!) input & advice. Although I've very experienced IT-wise, I have zero experience of mobile phone software.
Many thanks.
Solved!
Go to Solution.Just to follow up from my previous post - I did indeed decide to keep the 6220 classic as my new phone.
Yesterday I installed the Nokia_Conn_Cable_Driver_150_2_eng.exe driver from the CD
that came with my third party/fake DKU-2 cable onto my Dad's Windows Vista Home Premium laptop. Knowing through 15 years bitter experience working with PCs that once a newer version of a piece of software has been installed on a PC, it can often be impossible to subsequently install an older version, even once the newer one has been successfully "removed", I decided to install the 4 versions of PC Suite at my disposal in version order, with the oldest first, and if a version didn't work, to uninstall it, and then install the next oldest one, and so on.
I started with the version that's on the CD that came with my 6610 - version 5 point something. The installation went fine, and after re-starting, I followed the instructions to connect the phone to the computer with the cable. Unfortunately a Vista error message appeared saying there was a problem with the "unrecognised" USB device. PC Suite meanwhile just got stuck in a loop trying to connect to the phone. (The phone was switched on & unlocked!). After trying unplugging & replugging the phone etc, I uninstalled PC Suite, and then tried the same thing with the next oldest version of PC Suite that I have. This is version 6.6. The exact same problem occurred. I then uninstalled that and tried a version I had downloaded many months ago - version 6.86.9.3. The same thing happened, except this time after a while PC Suite gave up trying to connect and displayed a box offering links to places like this website that might help me solve the problem. I then uninstalled that, and then installed the current version of PC Suite - 7.0.8.2. The same thing happened as with 6.86.9.3.
There are, to my mind, 2 possible explanations for all this. Either the data socket on the phone is damaged in some way, which is possible, given that the phone got wet back in February and had to be repaired, and the first repair shop i took it to managed to dislodge the charging socket (which is right next to the data socket) during their botched attempts to fix the phone (another shop fixed this), OR, as I hope is the case, the cable is the wrong one, despite it fitting perfectly.
I've noticed that in several places (the phone's manual, readme files that come with the various versions of PC Suite, etc) that the DKU-5 cable is mentioned far more often than the DKU-2, which suggests that maybe I need a DKU-5. Also, if you go to the PC Suite download page and select the 6610, the cable that's mentioned is the CA-42. Another alternative is that the DKU-2 I have just doesn't work, given that it's not a proper Nokia cable.
Does anyone have any idea which cable I actually need to use to get the PC to talk to the 6610?
Also, in case you were wondering, the reason I tried 4 different versions of PC Suite rather than just the current version is that I've read on these forums that certain newer versions of PC Suite don't have certain features that certain older versions do, depending on the phone in question. This has caused much frustration for people, judging by the comments I've read. Given that what I want to do is to copy all the text messages from the phone (& the 14 pictures too if possible) to my computer, preferably with the sender names & folder structure intact, it may be a case that an older version of PC Suite will allow me to do that, but a newer version might not. This is especially true given how old the 6610 is. Of course it may be the case that an old version of PC Suite that allows me to copy the texts & pictures to the PC won't work with my new 6220 classic. If that's the case, I hope that I can install the current version of PC Suite over the top of the old version, and then copy everything onto the new phone.
If anyone has any firm ideas about what cable (& version of PC Suite) I should be using, I'd be most grateful.
Thanks for your attention.
Maybe you are looking for
-
How do i connect to wifi with ipad?
I just recieved my ipad 2. i cannot connect to wifi...help?
-
My serial number is not accepted when installing PSE11 on my new MacBook.
Chat support has verified that the number is ok, but issue remains
-
ORA-12514, TNS:listener does not currently know of service requested in connect descriptor
One more discussion with the same topic I know, I've tried to figure this issue out but still no chance, I'm using oracle-xe-11.2 bash-4.1$ cat listener.ora # listener.ora Network Configuration File: SID_LIST_LISTENER = (SID_LIST =
-
How do I upgrade to mac os 10.9.0
i need to upgrade to os 10.9.0 from 10.6.8 and cannot find a link to do so. Can someone assist me?
-
My log in password is not working and I don't have the disk to restart
I have problem with log in password. I don't know why is not working. I don't have any CD with my Mac to reinstal.