Finding original Fireworks .pngs from Dreamweaver?

I'm taking over another person's work and they built the
designs in Fireworks. I have an HR page that has photos that get
updated all the time (lots of turnover I guess) and I'm not really
a Fireworks guys (use Photoshop) and I've kinda figured out that
there is a ".mno" (I think that's what it is) file that stores the
metadata to show where the .gif or .jpg was made from the Fireworks
.png file.
I guess my question is, in matters of workflow, how do I
efficiently set up a .PNG file (from scratch) that saves its slices
in either .jpg or .gif, with the "here is the path to the original
.png" flag so when I come back to editing the .html in DW, I can
see a flag that says "find the original .png on Hard Drive 2"?
I just did a search on OSX Spotlight for the image file and
it came up with the same named file as .mno or something like that.
When I opened that as a text doc, it gave a path, which fortunately
helped me find the original .png this time, so I didn't need to
rebuild the image from scratch. I did this through the "back door"
of using OSX's search function.
There are times I'm so busy, I need to find stuff fast. How
do I find original .pngs from .jpg/.gif images made in Fireworks,
easily?
How do I set up a good workflow from FW to DW?
Thanks in advance,
nick

> How do I set up a good workflow from FW to DW?
Export the graphics from FW and place them on the page in DW.
Don't worry
about any more than that. Trying to use FW to write your HTML
gets everyone
into deep trouble.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"adobeexchangenick" <[email protected]>
wrote in message
news:[email protected]...
> I'm taking over another person's work and they built the
designs in
> Fireworks.
> I have an HR page that has photos that get updated all
the time (lots of
> turnover I guess) and I'm not really a Fireworks guys
(use Photoshop) and
> I've
> kinda figured out that there is a ".mno" (I think that's
what it is) file
> that
> stores the metadata to show where the .gif or .jpg was
made from the
> Fireworks
> .png file.
>
> I guess my question is, in matters of workflow, how do I
efficiently set
> up a
> .PNG file (from scratch) that saves its slices in either
.jpg or .gif,
> with the
> "here is the path to the original .png" flag so when I
come back to
> editing the
> .html in DW, I can see a flag that says "find the
original .png on Hard
> Drive
> 2"?
>
> I just did a search on OSX Spotlight for the image file
and it came up
> with
> the same named file as .mno or something like that. When
I opened that as
> a
> text doc, it gave a path, which fortunately helped me
find the original
> .png
> this time, so I didn't need to rebuild the image from
scratch. I did this
> through the "back door" of using OSX's search function.
>
> There are times I'm so busy, I need to find stuff fast.
How do I find
> original
> .pngs from .jpg/.gif images made in Fireworks, easily?
>
> How do I set up a good workflow from FW to DW?
>
> Thanks in advance,
> nick
>

Similar Messages

Convert fireworks *.PNG to Dreamweaver xhtml file???

I have a fireworks *.png image which I would like to export
into Dreamweaver MX. The fireworks artwork was provided by the
designer to use in a Dreamweaver based website. This *.png file
containes menues, images with their respective placeholders, text
blocks and other individual items that can and should remain
editable. I want to export the *.png into Dreamweaver and edit it
in Dreamweaver by changing fonts to text, moving around images and
frames, etc. Is this possible? So far, all I am getting is a flat
uneditable *.jpg or Html file with unselectable text and images. I
am obviously a beginner and would appreciate any direction. Thanks
in advance.

open the .png in Fireworks.
file-->Export Preview and follow the steps to export
"images and html"
that will give you an html file and images you then open in
dreamweaver.
> I have a fireworks *.png image which I would like to
export into Dreamweaver
> MX. The fireworks artwork was provided by the designer
to use in a
> Dreamweaver

Can not set source file for Fireworks png in Dreamweaver

I recently purchased Adobe Design Premium CS5 to replace my CS3, but I have a big
problem. When I export a png in Fireworks to Dreamweaver it does not set the source
file correctly. It places the Fireworks object on the page, but when I select the table
that holds the Fireworks object, the path for the source on the Properties panel is
wrong - it says menu2.png. The correct document relative path is dress_images/menu2/menu2.png.
When I drag the Point to File icon over the menu2.png on the Files panel, it correctly displays
the full path, but when I let go of it, it sets the path back to menu2.png. I can not even type it
in the source box and get it to stay.
Here is the problem. When I click on the Edit button, it says it can't find the png. It is using
the full path from the C: drive instead of the document relative path. If I browse to the png file
and open it in Dreamweaver then click the Done button, it saves the png file but does not change
any of the content on the HTML page.
Fireworks and Dreamweaver CS3 worked perfectly here. Help!
I just tried to do this on another computer. This time when I pasted the Fireworks HTML onto the
page in Dreamweaver it set the path correctly (it was a root relative path instead of a document
relative path). I tried to edit in Fireworks using the Edit button, and it opened Fireworks without
any problem. I made some changes then clicked the Done button. Now the Done button is suppose
to be like magic. It is suppose to save the changes to the png file, make the changes on the HTML
page in Dreamweaver, and change any of the supporting files (images) that have been edited. It
always worked this way in CS3, and anything less than this would be a huge step backwards. In this
case, it saved the changes to the png, but did not make any other changes. The web page in
Dreamweaver is still the same. How do I get the Done button to work its magic using CS5.
Another problem - when I paste the code onto the page, the page looks totally messed up. If I save it
and reopen it then it looks fine. However, this never occurred with CS3. Aren't updates to software
suppose to be improvements?
Thanks.
Nathan

Yes, the web site is correctly defined in Dreamweaver. I teach web design for both high school and
adult school, and I have done this procedure 100's of times with CS3. There is something different with
CS5. I took your suggestion and imported the Fireworks HTML using Insert -> Image -> Fireworks HTML,
but it still does not work. I can edit it in Fireworks, hit the Done button, and the png file is saved but
the HTML page remains the same.
Also, the export does not get the path right, and it will not let me set the path right. The only way the path
is right is if the page that I am pasting the Fireworks HTML is in the same folder as the png. It always
sets the png's path as menu.png. Therefore, if the page is in a different folder, the document relative path
won't find it. This was never a problem with CS3. In fact, you could paste the code using Control-V and it
would work 100% of the time. That is how we always did it. When exporting from Fireworks, I would set
Export to "copy to clipboard" then move to Dreamweaver, click where I wanted the code pasted and do Control-V and presto it would
always work. You could come back a month later, select the table, click the Edit button, make changes
in Fireworks, click the Done button and the changes would be reflected on the HTML page in Dreamweaver without
doing anything more. I have tried it with "copy to clipboard" and I have tried it with "export HTML file". Neither
works. There is definitely something different between CS3 and CS5, and right now I am missing CS3.
Thanks for your help. I will keep fighting this until I get it, but any additional input would be appreciated.
Nathan

Editing fireworks files from dreamweaver

I am using CS3 on an iMac with an Intel core 2 duo processor
and 2GB of RAM. I created a fireworks file which I then imported
into Dreamweaver. The problem starts when I select the table and
click edit to take me back to fireworks. I get the following
warning dialogue in Fireworks: "Please reinstall your software. A
problem was detected with your application. Please reinstall this
software to correct the problem." I have reinstalled Fireworks but
this dialogue is still coming up. Can anyone help me?

First off, it's usually a poor decision to use FW HTML,
unless you know
enough HTML to be able to anticipate and correct the problems
you will
encounter with that FW-generated markup. Of course, if you
know enough HTML
to do that, you would just do it all in DW, which is the
right thing to do
anyhow.
What version of DW and FW are you using?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"fragrantbot" <[email protected]> wrote in
message
news:g1ol1t$dgj$[email protected]..
>I am using CS3 on an iMac with an Intel core 2 duo
processor and 2GB of
>RAM. I
> created a fireworks file which I then imported into
Dreamweaver. The
> problem
> starts when I select the table and click edit to take me
back to
> fireworks. I
> get the following warning dialogue in Fireworks: "Please
reinstall your
> software. A problem was detected with your application.
Please reinstall
> this
> software to correct the problem." I have reinstalled
Fireworks but this
> dialogue is still coming up. Can anyone help me?
>

Saving Fireworks PNG as PSD

I have a Fireworks png file that i am trying to save out as a
psd. I can do so, but when I open in Photoshop, the layer groups I
created in my Fireworks png file are not preserved. The layers stay
put, but photoshop ignores the layer folder (or groups) and puts
them all in one big bucket. Is there a way to preserve the layer
groups during my saving to psd process?
Also, I have text in my png file that uses -4 letterspacing.
When I save as PSD, and open in Photoshop, the letterspacing
changes to -40. Anyway to get around this? I need to text to remain
editable is photoshop also.

Reaganjudd wrote:
> I have a Fireworks png file that i am trying to save out
as a psd. I can do
> so, but when I open in Photoshop, the layer groups I
created in my Fireworks
> png file are not preserved. The layers stay put, but
photoshop ignores the
> layer folder (or groups) and puts them all in one big
bucket. Is there a way
> to preserve the layer groups during my saving to psd
process?
>
> Also, I have text in my png file that uses -4
letterspacing. When I save as
> PSD, and open in Photoshop, the letterspacing changes to
-40. Anyway to get
> around this? I need to text to remain editable is
photoshop also.
>
I've written three different tutorials for CMX that deal with
converting
complex PNG files to PSD files. Fireworks has both LAYERS and
OBJECTS,
while Photoshop is really just layer-based. With the current
version of
FW there is no way that I know of to preserve this hierarchy
when you go
from PNG to PSD, but you can recreate the same set up
manually once the
file has been saved as a PSD and opened in Photoshop.
Here's how I tackled it:
1 Start by making sure that all objects are ungrouped (to
avoid any
object flattening in the Save as PSD process) and
individually named,
because FW will use these names for the layers it creates
when the PSD
file is made.
2 Save the file as a psd file.
3 Launch Photoshop and open the newly created PSD file. Keep
the
original PNG file open in Fireworks
Create and Fill Your Layer Groups
4 Refer to the original Fireworks PNG file and create a
series of empty
Layer groups that will mimic the Layer/object hierarchy of
the PNG file.
5 Name each group as seen in the PNG file. The easiest way to
create
empty Layer Groups without nesting them within each other is
to press
the Create New Group icon at the bottom of the Layers
Palette. This icon
looks like a file folder. To save time, you can double-click
on the
layer names in Fireworks, copy the name and then double-click
on the
Layer group name in Photoshop and paste the text.
6 Once the groups are named expand the layers in the PNG so
you can see
the objects within each layer. Find the matching layers in
the Photoshop
file, select them and begin dragging them into the
appropriate groups.
If you leave any objects/layers invisible in Fireworks when
you save as
a PSD, they are still exported and will still remain hidden
when you
open the file in Photoshop.
For more detail (and pictures) you can check out this article
on CMX.
It's based on converting one of our JumpStarts to a PSD file,
but the
workflow is applicable to any FW PNG file.
http://www.communitymx.com/abstract.cfm?cid=C49D7
Probably not the answer you wanted, but I hope these steps
help.
Jim Babbage - .:Community MX:. & .:Adobe Community
Expert:.
Extending Knowledge, Daily
http://www.communityMX.com/
CommunityMX - Free Resources:
http://www.communitymx.com/free.cfm
.:Adobe Community Expert for Fireworks:.
news://forums.macromedia.com/macromedia.fireworks
news://forums.macromedia.com/macromedia.dreamweaver

Opening Fireworks .png file from Dreamweaver

Anybody have problems with the connectivity between Fireworks
and Dreamweaver? I have a Retail version of Macromedia Studio 8.
I've been designing a new site and noticed that my fireworks .png
file is not updating from my changes in Dreamweaver (probably
because I cannot open from the edit button in Dreamweaver.) When I
try to open the .png file from the Edit button at the bottom of the
Properties Panel in Dreamweaver it gives me an Error Message :
Unable to Launch. Please be sure that the application exists and
that there is enough memory.
Obviously the only benefit of Macromedia suite is the
connectivity. Well, since I don't have it it is sucking. Was it a
misinstallation on my part? Anybody know what's happening here or
how to fix?
Thanks,
JP

Copy the file off the server, then open it?
And what version of Photoshop are you using? On what OS version?
Most likely this is a bug in the OS or server software that just shows up because of the asynchronous file IO used by Photoshop (to improve performance).

Launch and edit problem from Dreamweaver to Fireworks

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266405159_588474
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi
Not sure if this is a Fireworks or Dreamweaver problem but
here goes.
I¹ve created a graphic in Fireworks CS3 on the Mac and
Exported the HTML and
related images. I open the HTML file in Dreamweaver CS3, all
fine so far.
Then I highlight the table and click the Edit in
Fireworks¹ button and it
throws up a warning dialogue saying Cannot launch and
edit. The Fireworks
table could not be found in the HTML. Please export from
Fireworks and
re-import the HTML into Dreamweaver.¹
What?!!
I¹ve only just exported it from Fireworks! It¹s
even got the Fireworks table
code in the Code section, so what¹s going here?
Has anyone else had this?
Gaz
--B_3266405159_588474
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
Hi<BR=
>
Not sure if this is a Fireworks or Dreamweaver problem but
here goes. 
I’ve created a graphic in Fireworks CS3 on the Mac
and Exported the H=
TML and related images. I open the HTML file in Dreamweaver
CS3, all fine so=
far. Then I highlight the table and click the
‘Edit in Fireworks&#821=
7; button and it throws up a warning dialogue saying
‘Cannot launch an=
d edit. The Fireworks table could not be found in the HTML.
Please export fr=
om Fireworks and re-import the HTML into
Dreamweaver.’ 
What?!! 
I’ve only just exported it from Fireworks!
It’s even got the Fi=
reworks table code in the Code section, so what’s
going here? 
 
Has anyone else had this? 
 
Gaz
</BODY>
</HTML>
--B_3266405159_588474--

> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266407908_747577
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
When you export the sliced graphics from Fireworks it places
them into a
table. In my instance the code says...

So it recognises Fireworks was the the graphics app and jumps
back to it
when you want to edit the image. Fireworks then displays (or
should) a
Done¹ button over the window. You do your alts and
press Done to update the
HTML and graphics back in Dreamweaver automatically.
That¹s the only table I was referring to Murray.
On 4/7/07 3:02 pm, in article
[email protected], "Murray
*ACE*" <[email protected]> wrote:
> Why would you be wanting to edit the table in a graphics
editor, instead of
> an HTML editor?
--B_3266407908_747577
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Re: Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
When =
you export the sliced graphics from Fireworks it places them
into a table. I=
n my instance the code says... 
 
 
 
So it recognises Fireworks was the the graphics app and jumps
back to it wh=
en you want to edit the image. Fireworks then displays (or
should) a ‘=
Done’ button over the window. You do your alts and
press Done to updat=
e the HTML and graphics back in Dreamweaver
automatically. 
That’s the only table I was referring to
Murray. 
 
On 4/7/07 3:02 pm, in article
[email protected], "Murr=
ay *ACE*"
<[email protected]> wrote: 
 
> Why would you be
wanting to edit the table in a =
graphics editor, instead of 
> an HTML editor? 

</BODY>
</HTML>
--B_3266407908_747577--

Opening Fireworks from Dreamweaver CS5

I am trying to open Fireworks CS5 from within Dreamweaver CS5.
When I do I get an error message that says that "Fireworks is unable to be launched or an error has occured"
I am running Windows 7 Pro 64 bit system.
Any help would be greatly appreciated.
When I originally tried to open Fireworks (either directly or from Dreamweaver) I got the following message:
"Your user privileges do not allow Fireworks to update your registry. Launch and Edit with Dreamweaver will not work properly unitl Fireworks is launched while using Administrative privileges."
I got the following advice - Try right-clicking on the Fireworks.exe icon, then select 'Properties', select 'Compatibility' and then under the section 'Privilege Level', put a tick in the box 'Run this program as administrator'.
I have done what was suggested but now every time I open Fireworks I get the same Windows User Account Control message as follows:
"Do you want to allow the following program to make changes to this computer" - Program name Fireworks. When I say yes the program opens OK.
Any help would be greatly appreciated.
By the way everything works OK on my laptop running a Windows XP Pro 32 bit system.

Further to previous posting the error message I get when I try to launch Fireworks from Dreamweaver is:
"C:\Program Files\(x86)\Adobe\Adobe Fireworks CS5\Fireworks.exe
Please be sure that this aplication exists and that there is enough memory to run it."
Photoshop launches OK from Dreamweaver. Fireworks is the default image application.

I upgraded from Dreamweaver CS4 to CS6. but now "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?

I upgraded from Dreamweaver CS4 to CS6. but now when I want to upload I get "an TFP error occured - cannot make connection to host". I spent hours with the host technician and we cant find the error. I reinstalled DW4 and it connects to host perfectly. Anyone else seen this problem?
Mac OS 10.8.5
None of these issues are causing the error in DW CS6. We have double checked all of them and we have everything exactly right. Also I have exactly the same SiteSetup in DW CS4 and that works perfectly well. Could there must be factor in 6 that didn't exist in 4? Something that isnt in the SiteSetup but in some hidden dialog box ?
I can also upload to my host using Fetch, a third party FTP. And as I said DW CS4 works fine. So the problem is not with my host, its with DW CS6 in particular.

Thank you Jon, that fixed it perfectly. You have saved me from going crazy. The only difference I see now is in "Server Name" it changed what I had entered (my ftp address) to "Remote Server"; which seems odd -- but it works! Although I know there maybe also some other dialog box I have never seen
Of course I saw that menu item "Import" and but I thought thats obviously not for me: "Why would I want to import an entire website?". I did not however see "Export the selected site" for thats only a tiny icon in the footer. However I would have thought the same: "Why would I want to export my entire website?".
An observation: I've seen this problem in a lot of Adobe software, the menu-names of items are obscure, non descriptive. What would be better would be for the menu names or popups to say "Export Site Setup settings" and "Import Site Setup settings"

I lost my music stored in my computer. I originally bought these from I Tunes. Now I cannot play because it cannot find music file. How do I download from I Tunes again?

I lost my music stored in my computer. I originally bought these from I Tunes. Now I cannot play because it cannot find music file. How do I download from I Tunes again?

Hey MHallon,
Thanks for the question. I understand that you need to redownload previously purchased content from the iTunes Store. The following resource should assist you in doing so:
iTunes 11 for Windows: Download previous purchases from the iTunes Store
http://support.apple.com/kb/PH12491
Thanks,
Matt M.

Fireworks edit in Dreamweaver pouting and refusing to update.

Again, I'm new to Fireworks...let me know if I'm totally off
base here. Before I start, I'm using Fireworks CS3 and Dreamweaver
CS3 as part of Adobe Creative Suite 3 Web Premium. I use an iMac
running OS 10.5.2, Leopard.
I've just finished designing a new Fireworks navigation bar
for my company's website. The HTML exports and integrates into the
existing pages just fine (so far.) I'm in the process of testing
each page with the new Fireworks HTML to see if anything goes nuts
before I take it live.
Here's where I might be delusional. I insert the HTML into a
page, then use the "edit in Fireworks" option in DW to change the
default state of one button using the "show in 'down' state on
load" option (depending on which page is currently up.) I've
noticed that although I can use the "edit in Fireworks" option to
do other things (minor spacing issues for example) with marginal
success...FW is not reflecting the "down state" changes in DW at
all. I swear I've done this before and it's worked, though!
When I'm in the midst of making these changes and "preview"
in FW, everything works as it should. However, as soon as I hit
"done", no updates are reflected in the DW page...nor are they
saved in the original FW HTML when I go back and check.
If I'm completely wrong, what would be the best way to
reflect a "down state on load" button for each page of the website?
Do I need to make the changes, re-save the files, and re-export
them?
If it helps, the test index page is:
http://www.thdelectronics.com/index_testbar.html
It shows "home" in the down state. But when I load the HTML
on the products pages and try to change the down state button to
"products"...it doesn't work.
Thanks,
~G~

Hello
I just worked through this exact same issue today so I'm glad
to help. The easy answer is that when you are exporting the html to
Dreamweaver you need to check 'Multiple Nav Bar HTML Pages' in the
'Document Specific' tab (under the options button in my Fireworks
MX).
As far as I can tell, you end up with a nav bar for each of
your links and then have to import those each to your pages which
doesn't help when using templates. I'm hoping I can find a
different answer to that one.
Here is a link to the whitepaper...
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15435&sliceId=1

Fireworks CS3 and Dreamweaver 8

I own Dreamweaver 8 but not Fireworks 8, and I don't
particularly want to upgrade Dreamweaver to build decent websites
using Fireworks CS3. So has anyone imported Fireworks PNGs,
particularly of the sliced variety, into Dreamweaver 8? Any
problems?

princesspurple wrote:
> I own Dreamweaver 8 but not Fireworks 8, and I don't
particularly want to
> upgrade Dreamweaver to build decent websites using
Fireworks. So has anyone
> imported Fireworks PNGs, particularly of the sliced
variety, into Dreamweaver
> 8? Any problems?
YOu need to export the files from Fireworks to your
Dreamweaver site,
then if you want to use the Fireworks HTML, use the
Dreamweaver Insert >
Image Objects > Fireworks HTml feature.
Linda Rathgeber [PVII] *Adobe Community Expert-Fireworks*
http://www.projectseven.com
Fireworks Newsgroup:
news://forums.projectseven.com/fireworks/
CSS Newsgroup: news://forums.projectseven.com/css/
http://www.adobe.com/communities/experts/

Problems upgrading from Dreamweaver 4 to CS3

The website I manage is www.episcopal-dallas.org. Today, I
upgraded from Dreamweaver 4 to CS3. In Design view, I can edit
about half of the pages, but those of the other half (including the
index/home page) have gray backgrounds (with a few exceptions that
have white), and, although I can make changes in the code, I cannot
edit them in Design view. The cursor forms the universal "nicht"
sign — circle with a diagonal slash through it. I can't find
any commonality between the ones that I can edit and the ones I
can't.
Also, on some of the pages, the navigation panel that is
supposed to be on the left side has ended up above the text of the
main body of the page. Manuals I have say nothing about upgrading
existing websites.

> Apparently, DW4 didn't make
> the pages conform to the templates
Of course it does.
> unless you detach them from each other.
You should never have to do this.
I hope your understanding of this doesn't cause further
problems for you.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jeanie-wtlbh" <[email protected]> wrote in
message
news:g1q4h7$38v$[email protected]..
> Turns out the problem is with the templates. When I
detach the webpages
> from
> the templates, I am able to edit them. I am managing a
site that was
> designed a
> couple of years before me (hence Dreamweaver 4).
Apparently, DW4 didn't
> make
> the pages conform to the templates, which CS3 does,
unless you detach them
> from
> each other. The templates for my website haven't been
upgraded for years.
> So,
> most dion't match up. I'm so relieved to have finally
have figured this
> out. I
> have had to learn most of Dreamweaver "by the seat of my
pants."
>

How to edit the find-and-replace dialog in Dreamweaver 8

For over 13 years I have been a happy user of Macromedia Dreamweaver 8. And I still see no reason to use any other program for editting PHP.
However, 1 thing has been bugging me for years. In the find-and-replace dialog there is a select "Find in". The options are in a dropdown.
I want this select to be a multiselector (not in functionality, but just so I don't need to click to get the dropdown, but just one click to select).
I read in the help at 'Customizing the appearance of dialog boxes' at point 4
On your disk, find the appropriate HTM file in the Configuration/Objects, Configuration/ Commands, or Configuration/Behaviors folder.
I've been searching but can not find the code for that dialog, althou it should be easy. Also did a search for that 'save' image, because once I find that, I can find this form, but its not in the macromedia folder.
how to edit the find-and-replace dialog in Dreamweaver 8?

It's looks less like an image and more like a form drop list to me.
Yes its a dropdown list. But to find the code for that select I tried to find the htm file that code is on by searching for the save-image which is also on that page (next to the yellow folder). I did a search on all folders in c:/programfiles/macromedia and that image is not in there. If I could find the image name, I could search the code for that and should find that htm (or javascript) which is outputting it, then the select must be near to that.
I also searched the code for the various texts on the page and got many hits, but not from the dialog page. I can't search dll files, so maybe thats where that code is in.

I tunes can't find original song files of all my songs. How do I fix this?

I tunes can't find original song files of all my songs. How do I fix this?

Itunes stores ripped cds in the 'itunes' folder called 'itunes music' which under normal installation should reside into your 'My music' folder. Your music folders on the DVD then have to be copied into the 'Itunes music' folder for itunes to find it.
The tracks with the exclamation marks have registered with the incorrect location into the library. You can do two things:
Either search in the folder where you copied them from the DVD at the earlier step described above which means that you will have to do this for every single track, or the fastest way, delete all the incorrect entries and re-import by drag and drop into library the folders with the music you want to show in the library.

Finding original Fireworks .pngs from Dreamweaver?

Similar Messages

Maybe you are looking for