Finding out objects good candidates for reorganization ( datafile shrink)

Hi Gurus,
I need to find out what can objects are good candidates for reorganization to allow shrinking some datafiles. one of the challenges i have is to try and figure out how i can release some space from the tablespace in one of our environment .Please let me know if you have any scripts for this.

Either on a tablespace by tablespace basis or as a general statement which of the following statements are more true than the other statements.
1) More data is being INSERTED into the DB than being DELETED. In other words total disk space consumption is increasing?
2) About the same amount of data in being INSERTED as being DELETED. In other words the amount of disk space consumed is at equilibrium.
3) More data is being DELETED than being INSERTED. In other words less data is being held in the DB as time progresses.
Which statement best reflects your database environment?

Similar Messages

  • Can someone help me to find out a study guide for VCA DCV certification

    Hi,
    Could you someone help me to find out the study guide for VCA DCV..
    With Regards,
    karthik.N

    Download the exam blueprint, and have the objectives in mind as you work through the Fundamentals training: (VCA-DCV) VCA-Data Center Virtualization

  • How do I find out the base dir for the current workspace ? Change?

    Assume I took over a colleagues JDeveloper installation.
    How can I find out the base dir for his JDevelopers workspace?
    Can I change this workspace base dir afterwards/later (without
    problems for the included sources and projects) ?
    Where can I change it ?
    I did not found an option in the settings?

    If you hover your mouse over the workspace you'll see the directory where the jws file is stored.
    For each project in the workspace you can go to the project properties and look up information in the content node of the preference - there you can also change the location preferences for where code is created.

  • How to find out name of table for a structure.

    hello all,
                I want to find out name of table for a structure ADDR1_DATA. can anybody pls tell me how to find out it?
    Thanks,
    Ashu

    Hi Ashu,
    You write the structure name in se11
    after selecting the database table radio button
    click on the where used list button in the application tool bar.
    You will find the table name if it is used else where.
    Check out the website at:
    http://sap-idoc2edi-consulting.com/
    Read the blog at:
    http://blogs.ittoolbox.com/sap/ehadzipetros
    Regards,
    Jagadish

  • How to find out all the OKCODEs for a particular screen?

    I am working on t-code CL20N and trying to record with t-code SHDB, in the second screen when I press enter it is coming out, but when I run CL20N without SHDB it is going through all the screens perfectly, SHDB is not working for CL20N.
    Is there any other way to find out all the OKCODEs for a particular screen/s?

    Hi,
    First look for any push button or menu item which can take you to the second screen instead of hitting enter directly in tcode CL20N . If any such button exist in the TCode, u can use the same button in SHDB also for moving to the  second screen.
    Thanks,
    Rajinikanth G

  • How to find out the Area Menu for a Report/ Table/Function Module

    Hi,
    Is there any procedure to find out the <b>"AREA MEANU"</b> for a Report/Table/Function Module...
    Or is there any Transaction code / Report is available to find out all the report for a particular "AREA MENU".
    Thank you for your quick response...
    Regards,
    Thiru
    <b></b>

    Hi,
    Check these below threads:
    user log in & log out time SAO
    How to find user log-out time ?
    Regards,
    Nitin

  • How to find out the printer name for the Idoc

    Hi guys
    I want to find out the printer name for the Idoc,,some default printer is attached for one idoc,then how can we see the printer name for this idoc.
    Regards
    Madhoo

    Hi,
    For ALE/IDOC the  medium will be either ALE or EDI but not printer.So it might be wrongly attached.As such there won't be any printer attached to idoc.
    Regards,
    Nagaraj

  • How can I find out my data usage for the past 3 months?

    Greetings all, I have been a long time Verizon customer, and as such I, along with my husband, was grandfathered into the unlimited data plan. When I last spoke to a representative, they informed me that the only way we were going to be able to keep our unlimited data was by paying the full retail price ($600+) to get a new phone. So we were considering upgrading and changing to one of the newer data plans so we could still get the discounted price on the new phone, but I would like to make sure I choose one with enough data, without paying for a bunch of data that I don't use, however MyVerizon only shows me the amount I have used since the start of the billing cycle. Is there a way to find out the data usage for both my husband and myself for the last 3 months so I can choose the right option?
    Thanks in advance for your help!

        Hello sweetpea1221! How exciting that you're considering upgrading with us. mrhelper is helpful, indeed. You can view your data usage for each line under the View Bill option via your My Verizon account. You can also view your 3 month average  data usage with our Account Analysis feature. Here's a link that will be helpful in doing so http://bit.ly/vnLjqO. I'm confident that we have a great plan to match your data needs. Please let us know if you have further questions.
    TanishaS1_VZW
    Follow us on Twitter @VZWSupport

  • HT202659 I am being told I owe for something in apps how do I find out what it is for ?

    I Am being told I owe for something in apps how do I find out what it is for ?

    Greetings Colorado girl 4,
    Welcome to the Apple Support Communities!
    I understand that you would like to view your purchase history to see what charges are on your iTunes Store account. To view your purchase history, please follow the instructions located in the attached article. 
    See your purchase history in the iTunes Store - Apple Support
    Cheers,
    Joe

  • HT201272 I have 3 charges on my credit card same day same time.  How do I find out what they are for?

    I have three charges on my credit card from apple, same day and same amount.  How do I find out what these are for?

    You should receive an email receipt for any purchase (though it may not appear immediately, mine sometimes appear the following day).
    You've checked the purchase history on your account (Store > View My Account, Store > View My Apple ID on iTunes 11, menu option on your computer's iTunes), and have you made any in-app purchases ? If not and you haven't added or changed your credit card details (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) then you could contact iTunes Support and ask if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • How to find out last update date for business partner's marketing attribute

    How to find out last update date for business partner's marketing attribute??
    Im freshie for SAP Application and im assigned to find out last update date for marketing attribute changed
    which table is involved??
    Yours kindness will be appreciated
    thanks

    You can take a look at table AUSP as well as CRMD_AUSP_HIST.
    The "changed by" and "changed at" are logged on attribute level, not on attribute value level. When you change one specific value, the system does a "re-insert" of all existing values of this attribute.
    Take a look at the SAP notes 938426 and 966670  these may assit you in resolving the issue.
    Regards,
    William Laverde

  • How to find out Max threads count for Custom Work Manager??

    Hi All,
    How to find out Max threads count for Custom Work Manager??
    I have created 1 WM & targeted it to a cluster of 2 MS. Later I created Max thread Constraint = 300 & assigned that to my WM.
    I need to check how many threads maximum were created by my WM after lets say 1 completed day.
    The idea behind that is to understand if .. 300 is enough or need to increase the same way as we do it for JDBC datasource like.. Active connections Max count.. etc.
    Any Idea?
    regards,
    Tanmay

    Hi Ashish,
    Thanks for your response.
    The monitoring page that you are suggesting does not indicate the max thread count reached for a particular WM.
    For example, If I have Sample WM with 300 Max Thread Constraint, is there a way for me to check how many threads have been used out of 300??
    Any pointers in this regard are appreciated.
    Thanks,
    Tanmay

  • Is there any way to find out the dependency information for column of view?

    Does Oracle provide some view / table / pl/sql pkgs to find out the dependency information for column of view ?
    For example, there are two table mytable1 (col1 varchar2(10), col2 date) & mytable2 (col1 varchar2(10), qty int), and there is one view myView as
    select mytable1.col1, col2, qty from mytable1 inner join mytable2 on mytable1.col1 = mytable2.col
    Can I get some information such as myView.col1 is come from mytable1.col, myView.col2 is come from mytable1.col2, myView.qty is come from mytable2.qty
    ?

    I can get the information about the columns list in table/view from ALL_TAB_COLUMNS table, but I wish to know the column in the view is come from which original table's column.
    Is there any way to find it out from Oracle meta data / through any PL/SQL packages ?

  • Can we find out the date/time when the datafile last extended?

    Hello all,
    Can we find out the date/time when the datafile last extended?
    Is it possible to find out from the alert.log file?
    Correct me if I am worng?
    Thanks in advance
    Himanshu

    In continuation with the earlier post, can you tell me what sort of entry should be search if the above information is available in the alert.log file?
    Thanks
    Himanshu

  • How to find out import & export path for object migration between D Q & P?

    Hi guys!
    Is there a way, how to find out export and import path for object transport on XI?
    Thanx!
    Olian

    Hi,
    Have a look at these links.
    When we do an export of the IR or the ID Oblects, a typical path at which it gets exported in the XI Server is as follow:
    For IR Objects:
    “C:\usr\sap\PI1\SYS\global\xi\repository_server\export “
    For ID Objects:
    "C:\usr\sap\PI1\SYS\global\xi\directory_server\export"
    Now in case you need to import the ".tpz" that you have.... You need to place it in the path mentioned below and u will be able to do import it from IR or ID...
    For IR Objects:
    “C:\usr\sap\PI1\SYS\global\xi\repository_server\import “
    For ID Objects:
    "C:\usr\sap\PI1\SYS\global\xi\directory_server\import"
    File Level transport in sap xi
    Every SLD related transport details are explained here
    Regarding transport of SLD objects
    https://service.sap.com/~sapdownload/011000358700001684302005E/HowToSLDandXI.pdf
    Regarding transport of XI objects
    http://help.sap.com/saphelp_nw04/helpdata/en/93/a3a74046033913e10000000a155106/content.htm
    Regards,
    Akshay Jamgaonkar.
    Reward points if find useful.
    Message was edited by:
            Akshay Jamgaonkar
    Message was edited by:
            Akshay Jamgaonkar

Maybe you are looking for

  • Firefox 15.1 stops responding for no apparent reason!

    As the title says, Firefox 15.1 stops responding for no apparent reason! I just did a re-format of my system disk and I re-installed Vista 64-bit on it. I have obviously re-installed everything from Windows updates to chipset, graphics and sound driv

  • Is RTMT can monitor when the first Route Group of a Route List is not used ?

    Hi everyone, I want to find how monitor this event in RTMT without success. I hope someone will have an idea to suggest ! My problem : I have one Route List (RL_Remote) wich is used to route calls between two sites. This Route List has two Route Grou

  • Aperture 3 Backing Up Referenced Masters

    I am trying to develop my workflow better. I shoot images into the field and download them to my laptop. I then transfer them back to my iMac when I get home. I use Aperture 3 for my pictures. In Aperture, I have all of my files referenced to a exter

  • Customized orion-application.xml

    Configuration: Jdeveloper 9i Release 2 Production Version I have a customized orion-application.xml file under <project-directory>/src/META-INF directory. I would like to package this along with my application. How do I include it in my Deployment Pr

  • Photo slideshows exported to 1080p using Quicktime

    I'm looking to export a High Definition quicktime file of my photos. I'm testing now so when blu-ray or HD-DVD discs become available, I can start archiving my thousands of digital photos. While the overal look of what I've done isn't terrible, it's