Finding out SAP notes inside support stacks

Hi Experts,
Please let me know how to find out SAP notes that are there in a particular support stack.
Thanks and Regards,
Kunal Gahlot

Hi Sunny,
               I got the sap notes that are in some particular support packages.
               Just for your information , side effect report does not tell you the sap notes that are there in support packages
               it will tell you the effect of applying support packages to the system.
              to find the support packages just click on title on the support package page , it will show you the sap notes.
Thanks and Regards,
Kunal Gahlot

Similar Messages

How do I find out if an instrument supports GPIB

I want to make a VI for HP 8712B RF Network Analyzer, but somehow the Instrument is not detected by the GPIB board. I used MAX (Measurement and Automation Explorer) to see if any instruments have been detected. It showed me an error stating that no instruments have been found. I checked the cable connections and made sure that the instrument was turned on. I just installed the GPIB board and it seems to have installed alrite. My guess is the instrument does not support GPIB. Moreover, the instrument has an menu option for HP-IB addresse instead of GPIB addresse (as seen on instruments I have worked on earlier like HP 34401A Multimeter.). Is there any way to find out if the instrument supports GPIB from LabVIEW or any othe
r software included in the package.

HPIB is just HP's name for GPIB. They are fully compatible. What GPIB board do you have? Does it show up in MAX under the Interfaces list? What are the settings on the Network Analyzer? HPIB address number? Is it set to write only? Can you talk to other instruments okay?
I would check that you can talk to other instruments that you know work on the GPIB and then decide to investigate the board or the instrument to find the problem.
Rob

How to find out SAP J2EE Patch Level for 04s

Hi all
I want to find out SAP J2EE Patch Level for 2004s installation i tried to get information from SYSTEM INFORMATION link on WAS homepage but it gave only version :7.00 details and PATCH LEVEL was not mentioned .
I also tried to find out by looking into VERSION.TXT file for server & dispatcher in ....USR\SAP\J2E.....engine installation but again no details about PatchLevel was mentioned can anyone provide some information regarding what is the PatchLevel for WAS 7.0 , J2SE used is 1.4.2_09
Thanks in Advance !!
Asif

Thanks Kenny ,
But as you can see from version.txt file for Server0 it does not mention PatchLevel it is
blank
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
i also checked version.txt for dispatcher it is as below
Specifies the version of the system
Cluster-Version: 7.00 PatchLevel
Build-On:Thursday, March 23, 2006 18:47 GMT
Perforce-Server:
Project-Dir:JKernel/645_VAL_REL
JKernel Change-List:102557
Build machine:SAPInternal
Build java version:1.3.1_12-b03 Sun Microsystems Inc.
SP-Number: 07
Source-Dir: D:\make\engine\645_VAL_REL\builds\JKernel\645_VAL_REL\archive\dbg
I tried this on different 2004s server but the Patch Level is not mentioned whereas for 2004
servers it is mentioned
so can u give some inference based on above descriptions about What should be SAP J2EE Patch
Level for the 2004s servers
Regards !!
Asif

Report to find the SAP NOTES applied

Is there a way to generate a report in solution manager which gives us a list of SAP NOTES applied in our R/3 or BW servers.
Thanks,
Kiran

Hi
What Rajeev was tryin to say is... you implement E2E root cause analysis in solution manager system.
sub component under root cause analysis is "Change analysis" this will give details about notes implemented in satellite system.
There is also feature called change reporting, even this can be used for getting details about notes applied.
for more details chk
service.sap.com/diagnostics.
Regards,
Shyam.

How to find out who imported last support packs

Hello
I wander who imported last support packs on the system ILS (SAPKB70014 and SAPKA70014). How to find that out. The transport directory is common for many systems

One possibility is to check the SLOG*. They can be found in TRANSDIR/log. There will be an SLOGYYWW.SID, where YY is the year (example 09) and WW is the week number (example week 10 of the year). Check the date and time, when the package was imported and then look it up in the SLOG. You will get lines like these:
START imp all SID 20090204132535 USER myhost 20090204132535
And USER is the one you are looking for...
Best regards, Michael

How do i find out what files are supported?

is there anywhere i can get a list of the AV files supported by the classic?
i tried to add an .ogg file but it didn't take.
also, is there anyway to set i-tunes to notify me when a file type is not supported? it's frustrating to try and transfer a file and then hope i can find it somewhere if i'm not sure about the format being supported.
lastly, does anyone know where to find some good ogg to mp3 freeware for a pc? i tried snapfiles but no good.

http://docs.info.apple.com/article.html?artnum=61476
http://www.apple.com/ipodclassic/specs.html

To Find out which lanuages are supported by a particular given font. ?

Please help its urgent !!
i want to dynamically generate a list of languages supported by a given font.
Waiting for reply.
Thanks & Regards
Manish Basotia

its very urgent !! can any one help me out
Thanks & Regards
Manish B

How to find out what Boot Camp Support Software to use for my macbook

these are my specs:
Model Name:
MacBook
Model Identifier:
MacBook7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.4 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
2 GB
Bus Speed:
1.07 GHz

Welcome to the Apple Support Communities
You have a Mid 2010 MacBook. See > http://support.apple.com/kb/HT5634
As you are using OS X Lion, you can only use Boot Camp 4 drivers, so you can only install a 32 or 64-bit Windows 7 version (you can't run Windows XP, Vista or 8 with Boot Camp). The best way to get the Boot Camp drivers is to open Boot Camp Assistant and download the Windows support software from here. If not, you can also download these drivers from this Apple site > http://support.apple.com/kb/DL1634

SAP Notes Issue

Hello Experts,
Actually I had an issue while opeing SAP Standard Query, this issue is due to some missing BI Content information then I requested Basis team to apply SAP Note, they came back to me saying that SAP Note is already applied, then immediately I tried to confirm whethere that SAP Note was implemented or not in the TCode:SNOTE in the Note Assistant Browser (I followed the procedure from "SAP BW Consistency Check Guideline" document) but I couldn't find my SAP Note when I searched there. Can anybody help me out is there any alternate way to find out SAP Notes which are existing in my BW System.
Thanks,
Roger

Hi Roger,
Generally two way we can find whether sap note implemented or not
1. Goto Txn SNOTE -> there you find whther you note implemented or not, if it is implemented you can see the Tick symbol
2. Manually you can check in the system, whether the corresponding changes already done asper the SAP Note or not. If that required changes have not been done then that note is not implemented.
Hope helps.
Regards,
Kiran

How to find SAP notes in the standard report

How to find the SAP notes in the Std program? what is the use of SAP notes ?
Edited by: SAK krish on May 21, 2011 12:48 PM
Moderator message: please search for available information/documentation.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on May 21, 2011 12:56 PM

Hi Sylvain,
As you told that in the standard webcomponent is HRRCF_C_SEARCH_UI.
There is a view named VW_REG_SRCH...
In this view, there is a ViewContainerUIElement named VC_SRCH_CRITERIA.
You are not able to find the layout inside this ViewContainerUIElement.
For your information the ViewContainerUIElement is used to embed a view , so within this you will not able to view the layout.
When You look in the Tab WINDOWS,you see that for VC_SRCH_CRITERIA, there is
an embed view(or view use) named VW_SRCH_CRITERIA_USAGE_3.
So to find the View - VC_SRCH_CRITERIA, you have to go to the view section within this View - VC_SRCH_CRITERIA is exists there in the component and there you can also see the layout there in the view editor
Regards
Manoj Kumar

How to find out the supported Fonts?

How can I find out, which Fonts are supported in my environment?
Thanks

with getAllFonts() or getAvailableFontFamilyNames() in java.awt.GraphicsEnvironment. The needed GraphicsEnvironment object can be obtained from GraphicsEnvironment.getLocalGraphicsEnvironment().

SAP Notes for installing ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1

Hello members
The last time I install SAP on IBM i was about 3 years ago with ECC 6 on NW 7.00 on IBM i V5R4. Now, I have to install ERP 6.0 EHP4 on NW 7.01 on IBM i 7.1 for my new customer (only the ABAP ERP components - not CRM, SCM, SRM or Java stack). I try to first gather all important SAP notes that would be useful for me in doing the installation. By far, I identify note 1234455 (NetWeaver 7.0 EHP1/Business Suite 7 - IBM i) and 1432783 (Known Issued with IBM i 7.1). Is there any other notes I should be aware of for a successful installation?
I also need to identify the list of installation DVD that I need for this installation but, so far, I can identify DVD 51038620 (Install Master) and 51036902 (Install Export). I know I need more DVD than these two but I could not find any SAP notes that list all the DVD number I need.
Any suggestion would be very much appreciated?
Thanks.

Hello Satid,
nice to hear from you )
As you already pointed out, it is always useful, to read and apply the notes ...
What is special here ?
- Installation runs similar to your ecc6 stuff from 3 years ago - we typically replace the kernel of the kernel CD with a new patch level on the CD already.
- the big point is, that the system does NOT have EHP4 installed when you are done with SAPinst ;-(
you do have NW 7.01 and ERP6.00 => you have to start SAPEHPI immediately after that for all the components, that you require on EHP4. This is 95% of an complete upgrade => the installation is 2 . 3 times the effort of what wou would expect ...
If you do have questions, don't hesitate and contact us.
Regards
Volker Gueldenpfennig, consolut international ag
http://www.consolut.com http://www.4soi.de http://www.easymarketplace.de

SAP Note regarding manually updating SQL tables

Hi all,
I know that under no circumstances should customers update their SQL tables using any method expect DTW or via SAP.
Is there an SAP Note on this subject. I cannot find one anywhere?
Thanks
Greig

Check this SAP Note: 896891 Support Scope for SAP Business One - DB Integrity
[https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E&note_numm=896891]

Relevant SAP Notes

Hello colleagues,
I'm quite often facing a problem, that it is very hard to find relevant SAP notes in regards of installing and smooth running of CCLM and UPL.
I usually approach in a such way:
1. Go to service.sap.com/notes
2. put as a search criteria CCLM or UPL (or both) and wait for results.
The thing, that I want is to find only proper SAP Notes for my system, meaning I don't need irrelevant notes, which I don't have to install.
Then I tried to extend search criteria by:
Application Area: SV-SMG-CCM
Restrictions by Software Component:
Software Component
Release from
Release to
From Support Package
ST
710
710
SAPKITL709
But I don't get expected results!
I don't see MANY notes, which I find for my system without filter.
Can you please recommend anything?
Thank you!

Alexander,
Have you tried SAP Automated Note Search Tool: I'm loving it! ?
pk

How to find out Standard Functionalities in ECC 6.0

Hi Friends,
Can any one of you, please tell me as how to find out SAP Standard Functionalities of a particular Module in SAP-HCM (Eg: SAP-HR - PA module in ECC 6.0).
Thank you in advance and in anticipation of your reply.

Hi Murali
The core HR funcationality is delivered with SAP_HR software component - this will provide Personnel Administration transactions, screens, actions, infotypes and subtypes both general (PA-XX, PY-XX) and the majority of country specific infotypes and payroll solutions. This functionality can be viewed in the Easy Access menu for Human Resources
and you can see the configuration options in SPRO IMG
The whole ERP HR solution however also includes additional software components such as EA_HR which is
an enterprise extension - its content and related applications are detailed in the following link
http://help.sap.com/saphelp_erp60/helpdata/EN/44/4541e0bc511193e10000000a155369/frameset.htm
There are also business functions and sometimes additional software components such as ERECRUIT 600
or Business Packages that are to been used with EA_HR such as BPERP5ESS for Employee Self Services
Hope this helps
Stuart

Finding out SAP notes inside support stacks

Similar Messages

Maybe you are looking for