Finding power supply that works for 6251 mega pc

Hi! I just bought a 6251 on ebay. The person said the unit was like new (ha, ha)..I asked questions about the power supply & was assured it would work. Surprise, surprise...got it 2 days ago & the fan does not work (no spinning). I tried using a can of air to get it going, but no luck.
The model in it is a enhance 2920. I wrote to MSI...no help at all. Can't find the fsp250-60ms model either anywhere stateside. Is there any alternative?
Thanks,
M.

I end up in a loop going nowhere...one of my replies was the following:
Dear Customer,
Your email contains inquires that will be needing our technical support dept to answer or you are requesting a part/accessories for our product lines, which out tech support dept. handles. Please go to http://www.msicomputer.com/msiapps/ts_form.aspx to fill out the form in order to put your inquiry through our tech dept. Only the fields with "*" are needed to be filled. However, if you cannot fill out all the required fields, just simply put "n/a." There is also "Problem Description" field at the very end of the form, where you can type is specifically what your inquiry is. If you prefer to call them, you may do so @ 626 581 3001 and press the option for tech support. Our tech dept has high call volumes every day, and ½ staffed during lunch hours (12~2pm). If you get asked to leave a message and prefer not to leave a message press "0" at the voicemail greeting prompt and ask the operator to "connect you to a technician." Thank you.
I tried filling out the form & got nowhere. My original inquiry was the following:
To: MSI RMA
Subject: looking for power supply
I am looking to buy a replacement power supply for the MSI mega pc model no 6251. It is model no. FSP250-60ms.
Sincerely,
I also tried FSP group & got the following reply:
Thank you for your e-mail inquiry.
Regarding this model FSP250-60MS
This model is not a standard model of our product line.
This is a special proprietairy modeification on output contector PD & PE
The output voltage on PD & PE is +12Vstandby instead of +12V, +5V standby instead of +5V
We have no stock of this special item.
Please contact your computer supplier and ask for after sales service
Thanks
I cannot contact the supplier as I bought the computer on ebay.
so....am still trying to get ahold of a new power supply.
Thanks,
M.

Similar Messages

Finding a webcam that works for mac os x 10.3.9

i have one of those really old macs that are colorful.
but the system is mac os x 10.3.9 & i do not have a built in webcam
i cant find any that will work for such an early model.
help?

Well there's a few definitive lists on the Skype knowledgebase and forums:
http://forum.skype.com/index.php?showtopic=69289
There is a better list, but I don't have the link, it's been posted in the Apple Discussions more times than I can count.
I used a Logitech Quickcam Communicate STX Plus, but many have used others successfully.
Before you start spending money, there are two things to realise:
- Your old iMac probably only has USB v1, which severely limits the amount of video and audio (if you get one with a mic) of uncompressed data that can be streamed back to your iMac. For USB v1, devices drawing their power over the USB cable are limited to 4Mbit/s, or 500Kb/s. At say 20 frames per second you can see how poor the image is going to be. Remember the video isn't compressed (for internet transmission say) until it gets back to your computer. Which leads us to secondly,
- If your iMac is a G3, or a slow G4, the CPU may lack the grunt to encode 320x240 video at 20fps, never mind what you manage with USB.
I'm not trying to put you off, but it's not going to be fast full-screen perfect quality video like I get from my 2MP firewire camera and encoded on my Mac Pro.

I recently purchased a Mac mini with the Yosemite operating system, but I cannot find a driver that works for a canon MP 450 all in one printer.

I need a driver for a Canon MP 450 all in one printer to be used with a Mac mini with the Yosemite operating system.
Canon does not have a driver. Third party providers drivers do not work with "Yosemite."
Any suggestions?

Canon does seem to have a driver.... http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/pixma_mp_s eries/pixma_mp450#DriversAndSoftware

POWER SUPPLY info needed for GRAPHICS CARD UPGRADE!!!

I have a HP PAVILION p6631p and ide like to add a graphics card, but I was told I had to upgrade my power supply.
The card I purchased is the SAPPHIRE RADEON R7 260X 2GB and I was told I need a 500watt or higher power supply.
I was looking at the CORSAIR BRAND power supplies and tried emailing them to help me find the right power supply, but they said they needed to know what type of power supplies HP use in this model PC.
I didnt know what to do so im hoping someone can help me out with this information CORSAIR is asking for so they can help select me the right power supply for my PC.
I been searching for answers for weeks. Hopefully someone can help. Thanks.
This question was solved.
View Solution.

KJonline, welcome to the forum.
You were told correctly. You will have to upgrade the power supply unit (PSU) for the video card to work properly.
The PSU in the computer is a standard ATX. I suggest measuring the existing PSU and comparing the measurements to the one you choose.
I normally suggest at least 500W, but 600W is better for future upgrades. Here is a PSU that should work for you. It is 650W and is an Enthusiast series. This means that it has all of the power that you will need. It is 5.9" (W) x 3.4" (H) x 6.3" (L).
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

KT6 Delta Rebooting Issues - Solution that Worked for me

Hi
Solution that worked for me: Enabled SATA Controller which takes a while for it to detect SATA Drive and giving time for the system to warm up. I don't get that annoying message asking to restart Windows in safe mode, normal, & etc.
I've been having this rebooting problem lately. I tried everything from BIOS settings, checking drivers for problems, checking Windows XP, Power Supply, Checking Motherboard,and etc. I installed a fresh copy of Windows but still had that rebooting problem. When I got this MB 3 months ago, it was working perfectly and had no rebooting problmes. But its now fall in my place and the temp a bit cold.
I read about the temperature issue (20C). I disbaled the SATA controller because i don't have a SATA Drive.
Hope this will help others as well and for MSI to Fix the Problem.
Barton 2500+
Ati Radeon 9000 Pro
Maxtor DiamondPlus9 80 gig
Western Digital WBC 120 gig
LiteON 52x24x52
360W PS

No, i`m sure that trick it`s not working for me and for rest of us.
I did try all trick in the bios, and...

What kind of Power Supply to buy for my Power Mac G5?

Hello!
After trying several things, and poking around several forums on the net I have become convinced that my Power Mac G5 needs a new Power Supply. My big question is how do I know what kind of Power Supply to get for it?
My computer is one of the last of the Power Mac G5's with Motorola chips; it has the dual 2.7 GHz processor core. I know the install will be tricky, but I feel confident I can do it.
The Apple store doesn't sell these Power Supplies any more, and our other local Apple repair store said they'd have to "match up the serial numbers" in order to find a new Power Supply... but they also wanted to charge me $200. (I'm a poor high school science teacher and would rather do it myself.)
Any words of wisdom/explanations on how to find the right type of Power Supply for my computer would be greatly appreciated!!!

B_Free wrote:
Thank you both, Mac Man JW & Old Comm Guy!
My problem has been that the computer won't start at all. When I press the button on the front panel, I hear the click of a relay (like normal) but then nothing happens... no fans spinning up, no hard drive spinning up... silence.
When I open the side panel and press the button, I can see that the 2 cooling fans twitch just a little bit but they immediately stop. The only other thing I can see is that the red LED 7 light comes on, and according to everything I've read that light means 'contact an Apple representative.'
This started about 2 weeks ago. Hadn't had any trouble before then... if there were any warning signs I sure didn't see them.
If you think it might be something else I'm definitely willing to listen!
Did you check the liquid cooling system inside your G5 for leaks? That can make your G5 not start up as well. Look at this link: http://www.everymac.com/systems/apple/powermac_g5/faq/powermac-g5-liquid-cooling -info-leaks-issues.html

HELP! 2NX Not working, No lights, Power Supply IS worki

I know that my power supply is working (tested it elsewhere). I have the 2NX connected to power source and PC via USB. Still no lights. Tried installing software; no 2NX detected.
Is there some sort of reset I can do to the device? I'm desperate for it right now. Please help!!!
Thanks,
Lisa
XP SP2
Dell Inspiron 9300
Pentium M
.86 GHz
2 GB Ram

I know that my power supply is working (tested it elsewhere). I have the 2NX connected to power source and PC via USB. Still no lights. Tried installing software; no 2NX detected.
Is there some sort of reset I can do to the device? I'm desperate for it right now. Please help!!!
Thanks,
Lisa
XP SP2
Dell Inspiron 9300
Pentium M
.86 GHz
2 GB Ram

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

Whenever I update my iPhone software, it asks me to sign in to iCloud with an old email address. My other devices all have the correct address. How can I get the correct address for my iPhone? The only Apple ID that works for logging in is my new one.

To change the iCloud ID you have to go to Settings>iCloud, tap Delete Account, provide the password for the old ID when prompted to turn off Find My iPhone (if you're using iOS 7), then sign back in with the ID you wish to use. If you don't know the password for your old ID, or if it isn't accepted, go to https//appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Tap edit next to the primary email account, tap Edit, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iPhone on your device, even though it prompts you for the password for your old account ID. Then go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https//appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.

Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works. I can CREATE the list but, the songs that I have played don't accumulate in the list. I haven't changed the steps that worked for me previous to the upgrade. I have no idea

Since I upgraded to iTunes 11.01 the "Smart" playlists feature no longer works.
I can CREATE the list but, the songs that I have played don't accumulate in the list.
I haven't changed the steps that worked for me previous to the upgrade.
I have no idea how to fix this and can't find mention of anyone else having a similar problem.
Any suggestions?

Click on a station and drag to the left. The playlists sidebar will open up. Drop on the playlist you want to add to.
tt2

Random freezes-please, somebody, help me find a solution that works!

I feel a little stupid posting a new thread for what seems to be (at the moment) a rather common issue, but almost every related thread I've come across seems to pin the blame on different things, and I want to consolidate all that I know about what's going on in one place.
On January 5 I reinstalled Arch on the family computer in my house, and for the first few days it seemed to be working OK, but as I was getting everything installed and set up correctly, I started experiencing random freezes. Every package has been up to date since this was a brand new install, and the whole reason I was reinstalling was because the old setup was really messy and on a really old hard drive. The old setup didn't experience any of these issues, however, which rules out hardware issues (the current hard drive was in the system, it just wasn't used for /). The computer passes memtest86+ and mprime stress tests.
First, the problem(s): random lockups. These range from application lockups that still allow mouse movement, but not clicking, with the keyboard remaining accessible, to full X lockups which disable mouse and keyboard functionality. The former have only occurred a handful of times while the latter occur much more often. I don't have an ssh server set up on this computer to know whether it would respond to use that way, but my assumption is that, yes, it would. This seems to be a rather prevalent issue right now, but like I said, a lot of people identify different causes and workarounds/fixes only work for some people.
A few weeks ago I looked around and everything I was finding suggested it was a video driver issue. I was using xf86-video-ati, so I switched to xf86-video-vesa. Things worked fine for about a day (which, for the record, is not uncommon; the problem seems to come and go, as for about a week the computer worked fine and then today I had four lockups in a row) but then it started to hang again. It's not a video issue. It's not a hardware issue. It's either a Gnome/GDM issue or an Xorg issue, a combination of both, or something else that is conflicting with either of those three.
I found this thread about X hanging whenever one presses enter. My issue seems to match the user in this thread (with it's corresponding bug report), because sometimes it hangs when I press enter—but only sometimes. The majority of the crashes, by my estimation, have nothing to do with whether or not I press enter. Often I (or someone else in my house) will simply click something and everything will freeze.
Beyond this I cannot really describe much else. However, here is some additional info which might help diagnose the problem.
From Xorg.0.log.old:
Fatal server error:
Caught signal 3 (Quit). Server aborting
.xsession-errors doesn't seem to contain anything worth noting.
When booting X also launches on tty2 instead of tty7. In the first few days after the install I seem to remember it launching on tty7 initially, but it's possible that my mind is playing tricks on me and this is not the case. If it is I do not know what accounted for the change. /etc/inittab is identical to the file on my personal PC which runs GDM and openbox, but which is experiencing no problems whatsoever, and X opens on tty7 on it (and which is also completely up to date). At post #13 in this thread there is a suggested edit for /etc/gdm/custom.conf, but it does nothing for me; X still opens on tty2.
GDM is the last daemon listed in /etc/rc.conf. I've tried loading the daemons before it backgrounded (with @) and also regularly (without), and neither makes a difference. The freeze often occurs when logging in or switching users, but I must emphasize that for the most part the lockups are completely random.
I am really hoping to find a fix, and the sooner the better, because 6 people regularly use this computer and constant freezes are unacceptable to my mind. I also fear that the exact same error has been occurring on my friends' business computer which I recently updated some packages on, since I've been getting emails about the computer locking up. Of course with that one I could simply downgrade everything I just updated, even though it'd be tedious to do so.
Last edited by tonyisnt (2010-02-02 23:24:46)

mgangav wrote:
insanemal wrote:
change to lanuching gdm from your inittab using run-level 5
or remove agetty from tty2
both will resolve the issue.
Actually, how will running gdm from inittab help with this issue?
And I didn't understand what you meant by "remove agetty from tty2"
You know, I am pretty sure that the issue has to be with xorg. I was having this issue a lot a month ago, but then, a certain upgrade of xorg fixed the issue. I was fine for a few weeks. My computer never crashed. But, unfortunatly, a package in that same upgrade was broken and I ended up upgrading the system again a few weeks ago. xorg also upgraded at the same time. Now, my computer keeps crashing randomly and in random ways.
I think that the best thing to do is to keep up with the xorg updates, find one that works for your system and have pacman ignore all upgrades to xorg after that.
Actually, if anyone can tell me how to downgrade xorg to its state 3 weeks ago, it would be absolutely awesome.
Thanks
Because if you use runlevel 5 you dont have agetty on TTY2 so it won't try and kill xorg all the bloody time
The problem is caused because GDM is starting so fast the XORG server it loads up checks for free VT's and finds TTY2 is empty and starts on it. THEN your inittab fires up agetty on TTY2.. which promptly causes hell to arrive in a handbag.
You really need to be less critical of people offering you advice.. and possibly even check what they have posted in the past.. like the threads from months ago dealing with this issue. (search is great you know)

Thinkpad yoga - limited connection - intel 7260AC (with solution that worked for me)

limited connection issue
i'm new to the forum, sorry for bad english
i've a brand new rhinkpad yoga, with win 8.1 and intel ac 7260 wifi card
first of all the solution that worked for me is moving from WEP to WPA2 protection with the router
the problem was that i wasn't able to connect to internet using wifi
i got "limited connection" and i wasn't able to access internet at all
windows validated the connection and obtained an ip, but it wasn't then unable to access internet at all, i also wasn't able to access or ping the router.
i also got an error stating the lack of the default gateway, but this one seems to be resolved by windows check and repair procedures
my router had wep protection, and i used it with no issues with 2 android smartphones, an android tablet, a mac and a linux system, and in the past with windows 7 and vista systems.
i've searched for solution all the night and checked everything
- system and driver update (via usb thetering)
- various command to reset network configuration
- unchecking selected check box in energy saving tab inside wireless property panel
but the only one solution that worked was the move from WEP to WPA2
hope this helps
my first post, be patient...

From what I gathered, about the Y2P Limited Wifi issue, this problem is solved by configurating a router to meet the computer needs. Once done, to fully implement this fix, it is adviced that you carry this configured router and use it every where you go, like a power cord. When you go to Statbuck in the monrining, be sure they hook up your router and return it when you leave. Alternitively, this can be done at other venues like the airport, hotel, school, work, etc.
I really don't know why people keep wasteing their time. Lenovo has chimed in and said this is a router issue. That said, the aformentioned advice is a formulated fix. Shall we put an end to thiese topics and get the forum moving again past the wifi issues? Like said many times, this issue has been fixed using the above reccomendation.

HT1414 is there a ios downgrade that works for the 4s?

is there a downgrade that works for the iphone 4s from ios 6 to 5.1.1

I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums, but you can use Google to find information on how to install an older version of iOS on any iDevice.

After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?

After downloading the new lion os x 10.7.2 with cloud and lion recovery update my internet doesnt work. I have tried 2 different networks that work for other people but not me. help?

Logic's preference files may have become corrupted:
1. Quit Logic Pro
2. In the Finder, press and hold down the "option" key then select "Library" from the "Go" menu
3. Open the "Preferences" folder
4. Drag the following files to the Trash:
    - com.apple.logic.pro.cs
    - com.apple.logic.pro.LSSharedFileList.plist
    - com.apple.logic.pro.LSSharedFileList.plist.lockfile
    - com.apple.logic.pro.plist
    - com.apple.logic.pro.plist.lockfile
These files will be re-created when Logic is next opened.

Qosmio X500: power adapter stopped working for no reason

Hi,
Now i have my Qosmio X500 for a year and i like it, however i have small problems with it, and i would like to know if it can be problematic.
The first thing is that my power adapter stopped working for no reason,
So i bought a new one, but it always made some noise when the laptop was fully charged.
I know people with the same laptop and their adapter didn't make that sizzling noise, it looks like it was already defect from the begin.
Then i have one dead pixel in the middle of my screen, no problem for me.
Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...
Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
So all those problems i have annoy me, especially the last one (webcam and speakers problem), can this fit in the warranty of the laptop? I did extend the warranty for one year...
Thanks in advance.

> The first thing is that my power adapter stopped working for no reason,
> So i bought a new one, but it always made some noise when the laptop was fully charged.
I think this is AC adaptor fault maybe a broken cable or something like that I would recommend you to replace this get in contact with the dealer and ask for the new one.
> Then i have one dead pixel in the middle of my screen, no problem for me.
I found a info about such issues:
+Information on screen technology and pixel failure tolerance for LCD displays
+http://aps2.toshiba-tro.de/kb0/TSB9502LZ0000R02.htm
> Finally my screen is a bit loose from the laptop, when i close it, i can move it, it always seems like it's not on it's correct place, because when i close it normally it's not 100% horizontal...Also when i replace my screen, my speakers make crackling noises and my webcam stops working.
Maybe you should ask Toshiba notebook technicians for a check maybe some screws or the hinges are loose.
The speakers should be checked with connected headphones. If you will not notice the same crackling sound using headphones, then the issue might be related to speakers

Cannot find a solution that works to import messages from Windows Live.

The instructions given say to go to Tools/Options/Advanced/Maintenance/Stored Folders and there is no tools option in my Windows Live.

mgangav wrote:
insanemal wrote:
change to lanuching gdm from your inittab using run-level 5
or remove agetty from tty2
both will resolve the issue.
Actually, how will running gdm from inittab help with this issue?
And I didn't understand what you meant by "remove agetty from tty2"
You know, I am pretty sure that the issue has to be with xorg. I was having this issue a lot a month ago, but then, a certain upgrade of xorg fixed the issue. I was fine for a few weeks. My computer never crashed. But, unfortunatly, a package in that same upgrade was broken and I ended up upgrading the system again a few weeks ago. xorg also upgraded at the same time. Now, my computer keeps crashing randomly and in random ways.
I think that the best thing to do is to keep up with the xorg updates, find one that works for your system and have pacman ignore all upgrades to xorg after that.
Actually, if anyone can tell me how to downgrade xorg to its state 3 weeks ago, it would be absolutely awesome.
Thanks
Because if you use runlevel 5 you dont have agetty on TTY2 so it won't try and kill xorg all the bloody time
The problem is caused because GDM is starting so fast the XORG server it loads up checks for free VT's and finds TTY2 is empty and starts on it. THEN your inittab fires up agetty on TTY2.. which promptly causes hell to arrive in a handbag.
You really need to be less critical of people offering you advice.. and possibly even check what they have posted in the past.. like the threads from months ago dealing with this issue. (search is great you know)

Finding power supply that works for 6251 mega pc

Similar Messages

Maybe you are looking for