Finding Process Chain using the Request Number

Hello,
I am new to BI and currently monitoring Process Chains.
I am scheduling a process chain which runs 3 times in a day.
When i see the infocube there are four requests in the infocube, that means one more request apart from my three.
The other reuqest is also being exeuted by user ALEREMOTE which means even it is being triggered by some other process chain.
Can i please know how to find out the other process chain using the request number or so.
Thanks in Advance.
Bharathi.

Hi,
Goto each request and navigate to Infopackge screen and there you ll be able to find the process chain maintenance button. Click on that button, there you ll come to know what are all the process chain have been used for the single or multiple IPs.
Check one by one Request Infopak.
Thanks
Sathish

Similar Messages

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

Is it possible to find an iPhone using the series number on the receipt. It was stolen before I even took it out of the box.

Is it possible to locate my new iPhone using the series numbers on the receipt? I never even took it out of the box before it was stolen.

The answer to your question is "no".
Here's what to do for a stolen iPhone:
http://support.apple.com/kb/HT5668

My iPad was stolen and I had not activiated "Fine my iPad". I have the serial number. Is theree a way to protect my data or find my ipad with the serial number?

My iPad was stole. I had not activated "Find My iPad". Can I find my ipad using the serial number or have it erased using the serial number?

There is no way for Apple to track an iOS a device by serial number. Your data is unprotected and you should take steps to make sure that nothing is compromised.
Report a lost or stolen Apple product - Apple Support
If your iPhone, iPad, or iPod touch is lost or stolen - Apple Support

I can't remember my security questions and have used the maximum number of tries, how do I find out what my answers are so I can log in and buy some music?

I can't remember my security questions and have used the maximum number of tries, how do I find out what my answers are so I can log in and buy some music?

From a Kappy post
The Best Alternatives for Security Questions and Rescue Mail
1. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
2. Call Apple Support in your country: Customer Service: Contact Apple support.
3. Rescue email address and how to reset Apple ID security questions.
An alternative to using the security questions is to use 2-step verification:
Two-step verification FAQ Get answers to frequently asked questions about two-step verification for Apple ID.

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

I want to buy a hard case for my macbook pro, but I don't know what year it is. When I use the serial number to try and find out, all it says is, "~VIN,MacBook Pro (15-inch Glossy)". When I type that into amazon for a case it gives me nothing!

Hi T,
Either of these will give you the info you seek:
http://www.appleserialnumberinfo.com/Desktop/index.php
http://www.chipmunk.nl/klantenservice/applemodel.html

My iPod has been lost for about a month now and I wanted to know if I can find it using the serial number because I don't have iCloud set up on my ipod

My iPod has been lost for about a month now and I wanted to know if I can find it using the serial number because I don't have iCloud set up on my ipod

No.
You cannot.
Sorry

Is there any way to find a lost iPod Touch 4G without using Find My iPhone or MobileMe? By using the serial number or the iTunes account synced in it?

Is there any way to find a lost iPod Touch 4G without using Find My iPhone or MobileMe? By using the serial number or the iTunes account synced in it?

"Is there any way to find a lost iPod Touch 4G without using Find My iPhone or MobileMe? "
Other than looking for it or luck, no.
"By using the serial number or the iTunes account synced in it?"
No.

My old phone doesn't turn and I want to get the serial number for it to see if it's eligible for the battery replacement with Apple. Can I use the IMEI number to find the serial number?

My old phone doesn't turn and I want to get the serial number for it to see if it's eligible for the battery replacement with Apple. Can I use the IMEI number to find the serial number?

Call applecare. They can look up the IMEI number in their system to see if the device is eligible.
AppleCare US phone number: (800)-694-7466
Contact Apple for support and service
http://support.apple.com/kb/HE57

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do?

I have transferred Aperture 3 from an old Imac to a new. Now I´m requested to put in the serial number for v2, which I upgraded from several years ago. I can`t find it, but have the serial number for the upgrade. What to do? Can I find the original serial number in my old Imac?

You'll have to contact Apple. See Pro Application Replacement Serial Numbers

Function module used to restart the process chain in the middle?

Hi all,
can anyone pls let me know the function module to restart the process chain in the middle of the process chain?
I need to run the process chain from the middle which can be done through a function module can anyone pls let me know!!
Thanks
pooja

what exactly your requirement is?
You can't trigger the process in the middle either it should be trigger by start variant or it's predessor.
If your chain failed in the middle - you can fix the prob and can do 'Repeat' option or you can also use FM 'RSPC_PROCESS_FINISH . (this FM will work only if the chain fails)

HT1391 Find my iPod has been turned off is there anyway to use the serial number to find it ???

My iPod 5th gen. Has recently been stolen and I got an email saying that find my iPod was turned off and all I have left is the serial number and I was wondering if there was anyway to track it down and claim it using the serial number.

No way at all.

To set delay in process chain using a program

Hi all,
We have a requirement in which the loads from nearly 15 sources (DSO) gets loaded into the Cube thro 15 process chains. The source gets loaded from the PI interface. So it might happen that simultaneously 10 loads will be started and reach the cube.
In the cube we have delete overlapping request, so its gives a deadlock when the chains try to delete the prev. request at the same time.
What we have planned is if we can write a program that will set a delay depending on the lock entries present for that particular cube. But still we are not sure how far this will help.
If anyone has faced a similar issue or can anyone suggest on this would be much appreciated.
Thanks
Merlin

I believe in each of your 15 local chains you have the load to Cube process.Why dont you take the load to the Cube out of the local chains and in the meta chain you could sequence the loads from the 15 ODSs so that you can have a parallel processing upto the ODSs ( assuming the rest of the local chain is used to fetch from R3 ) and then sequential to Cube.
I dont think writing a program will help much here.

Trigger Process Chain through the Web

Hi,
I am trying to allow the users to control when they trigger a process chain through the web.
The users have a number of integrated planning sheets, which they access and input, once they are happy with the inputs, then they want to trigger the process chain to carry out additional loads.
I am using function module RSPC_CHAIN_ACTIVATE_REMOTE to trigger the process chain, when I test this with the chain set to direct scheduling it works fine.
I have set a planning function to call RSPC_CHAIN_ACTIVATE_REMOTE, with the process chain in question. Now when I run it with the chain set to direct scheduling it repeatedly calls the process chain over and over again, like it is in an endless loop.
When I try setting the chain to Meta Chain or API nothing happens.
Does anyone have any ideas why I can't get this to work through the web?
Thanks
D

CALL FUNCTION 'RSPC_API_CHAIN_START'
    EXPORTING
      i_chain       = 'YOUR PROCESS CHAIN NAME'
    EXCEPTIONS
      error_message = 1.
   IF sy-subrc <> 0.
      CALL FUNCTION 'BALW_BAPIRETURN_GET1'
       EXPORTING
        type             = sy-msgty
        cl               = sy-msgid
        number           = sy-msgno
        par1             = sy-msgv1
        par2             = sy-msgv2
        par3             = sy-msgv3
        par4             = sy-msgv4
       IMPORTING
        bapireturn       = p_return.
      RAISE STREAM_FAIL.
   ELSE.
     RAISE STREAM_SUCCES.
     RETURN.
   ENDIF.

-1 Could not find admin credentials in the request.

Hi ALL
I have configured SES export content on UCM and created several sources
But unfortunately while accessing the the Config url , I am seeing following error message
" -1 Could not find admin credentials in the request. "
Config url looks like this
http://<<contnet server yrl>>/<<folder>>/idcplg?IdcService=SES_CRAWLER_DOWNLOAD_CONTROL&source=<<source_name>>
Can someone pls suggest something here
TIA

One option you have is to use the opatch lsinventory command - this will list all of the patches applied to the ORACLE_HOME. If you are wanting to determine the database release number, query V$INSTANCE
http://docs.oracle.com/cd/E11882_01/server.112/e25513/dynviews_2002.htm#REFRN30105
OPATCH FAQ [ID 242993.1]
HTH
Srini

Finding Process Chain using the Request Number

Similar Messages

Maybe you are looking for