Finding process steps from BPR - some process steps missing SAP tcodes

In Solution Manager 4.0, we are currently focusing on the documentation part and our teams have defined their respective hierarchies, scenarios, processes, and process steps.
When looking at our process steps, we are trying to download it from the BPR but it seems such an uphill battle to find the right process step in there and if you think you have it there are no transactions behind it.
My questions are:
1. Is there any way I can find a process in the BPR by transaction code so it will show processes by transaction code?
2. Any tips of finding the right process in the BPR?
3. If we are to manually add the process steps and the transactions by process step, what do we lose? In the structure tab of the business process, the source and original name will not be populated but looking at the transaction tab of the process step, after manually added, it looks fine. Will this at all influence getting the customization (configuration) items in SolMan?

Dear all,
The best way to find the process step in sol Man BPR is:
Let us consider one scenario:
You want to find business process step "Run MRP" from BPR. If you want to execute this process step, the relevant t.code is MD01. ( Let us assume You know this t.code already by memory).
Now enter this t.code in Sol Man, at business process step level. If you enter this t.code, automatically, the system will give you the "Description of the t.code (as a text)". This text is automatically fetched from BPR content. Copy this text & search in BPR.
Now , the system will properly highlight the t.code (MD01) from BPR. Now select the process from BPR.
Regards
Senthil

Similar Messages

Syncing from e71 - some contact details missing

Hi
I recently did my first sync (one way - to server) of my contacts from my E71. Mostly it worked well but for about 5 or 6 of my 70 or so contacts some details (usually phone numbers) did not come through. They were listed as 'telephone' in the phone contacts. I tried changing the label to 'mobile' but it made no difference, and also tried changing the formats to remove the +44 at the start, but again, made no difference - is there a reason why this happens some times?
many thanks
sd

*Update*
Did the restore and STILL no luck... in my address book i have kust names and photos of contacts but NO contact information... no email addresses, street addresses OR phone numbers... I can't figure out what has gone wrong or is mobileme-sync down at the moment?
Anyone have any ideas??? PLEASEEEE

"find" process User =nobody [?], using up to 90% of CPU = G5Quad [??? !]

This one is for the PPC G5 Quad pros:
Had been working for hours on my Mac Pro (different machine, I know) with my networked G5 Quad supposedly idling in the background.
The only open applications on the G5 Quad are Adobe Photoshop CS4 and Adobe Bridge CS4, the main reason for my keeping the G5 at this point, because of vital plug-ins that are not Intel-compatible and are absolutely irreplaceable and mandatory. (I do have Ps CS5 and CS6 on the Mac Pro. Both aforementioned applications had no open documents. I have not actually used then in about six weeks, so the chance of Bridge building or rebuilding caches id very low.
Alerted by a sudden, very substantial increase of fan and liquid pump activity in my essentially idle G5 Quad, I switched the shared monitors inputs to it and was not surprised by the temperatures, almost all showing no more than 49ºC/121º.
Launched the Activity Monitor, which was showing a Process named "find" owned by a User named "nobody" using up to 90º% of the CPU column.
Terminated said process, only to see it become active again a short time (few minutes) later.
While typing this post, with interruptions, (20 minutes or so) the "nobody" user disappeared, as did the "find" process. some 15 minutes later, the fan and pump activity ended, returning to the G5's normal vigorous hum.
It has been running normally for about 30 minutes now, with very quiet sound levels.
Obviously, I'm mystified because all of this is above my pay grade.
I have a bunch of questions:
1.— Why on Earth is/was there a user named "nobody" working my machine so hard? What or who can it be?
2.— What is a "find" process, especially on a supposedly idle machine?
2.— Any chance my computer has been hacked and overtaken by a "third party"?
3.— Should I be worried? I am.
4.— What steps would you recommend I take at this point?
Thanks in advance to all. I look forward to hearing from old Apple forum friends. 
2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; intrusive Spotblight, Dashboard and Time Machine permanently disabled; dual 22"CRT/22"LCD monitors; USB wireless 'N' available but connected to the Internet via wired Ethernet; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
Intel Xeon Mac_Pro1,1 [late 2006] 2.66 GHz Quad; 16 GB RAM; mutant/flashed, factory-overclocked 875/1225 "Apple PowerColor" ATI Radeon HD 5770 with 1 GB of GDDR5VRAM driving side-by-side dual 22" CRT/24"LCD monitors in Extended-Desktop mode; Mac OS X Lion 10.7.5 and Snow Leopard 10.6.8 boot drives; intrusive Spotlight and frivolous Dashboard permanently disabled; USB wireless 'n' available but connected to the Internet and networked via wired Ethernet.
These two computers share keyboard and mouse through a simple, manually activated USB switchbox.

Gee… I should have done my due diligence frst.
Niel had already answered the very same question here:
https://discussions.apple.com/message/21746515#21746515
My bad.
Thank you, Niel. Please say at least "Hi !" here so I can give you your well deserve points here as I cannot do it in the other thread.

How to find process chain using background job in sm37

How to find process chain using background job in sm37

Better is to select the job.
Select (Define) Step (s) or F6.
Select the line and Menu Goto>Variant.
The variant contains the name of the CHAIN and its VARIANT.
Success
We faced an old job and via job monitoring we were informed about a cancelled job every 'interval'.
We noticed that the related chain was deleted but still the job was scheduled each interval again and was cancelled because an event was missing
We could not find the scheduled job via SM37.
Via view V_OP, view over tbtco abd tbtcp, we find the related entry.
We delete these entries via function BP_JOB_DELETE....
Edited by: Jack Otten on Jul 9, 2010 2:50 PM

Can't find Expense Report process in Find Process in Workflow - Urgent

Hi,
I have a submitted expense report. I tried to search for the Expense Report number in the Find Process window in Workflow administrator responsibility.
But it did not give me any result. When I query ap_expense_report_headers_all using below query for the same Expense Report number, i got the data.
<strong>select * from ap_expense_report_headers_all where invoice_num = 'WEX308147'</strong>
Then i tried searching for the notifications recieved by the Approver of the Expense Report. Enter Approver Name in TO Field in Find Notifications window in Workflow Administrator resp. But no notifications are available in that approver list.
When i query in the APPS.wf_notifications table for notification from this process, i could find that the notification is in closed status.
Can some one help with the pointers, why the Expense Report is not displayed in Find Process window and Notification is not displayed in the Find Notifications window?
Regards
Ram

Try using the Status Monitor in the Workflow Administrator
use APEXP as the 'Type Internal Name'
change the 'Workflow Started' to 'Today'
The item Key for your workflow should be the expense report number, pick yours and drilldown in to the workflow to see where you it is waiting.

"Find" process is running every morning for five minutes

Hello,
I upgraded to Leopard about a month ago. Not sure if this has been going on the entire time, but for at least the last two weeks, I have noticed that the "find" process is running pretty much every morning when I wake my MacBook Pro from sleep. This is really annoying because it runs for about five minutes as I'm trying to load up apps and get started on work. It brings things to a crawl because of all the disk activity is creates.
As I understand it, the find process should only run very briefly as part of the daily maintenance script. The amount of time it takes for this process to run (again, about 5 minutes) makes me think it's the weekly maintenance script that's running. But then why would that happen daily?
Finally, why is this happening in the morning at all? I thought these scripts were made to run themselves at 3am or something like that. I used to just run them manually from Terminal because I knew my laptop was never awake at 3am. Did the timing get changed with Leopard?
If anyone can shed some light on this, I'd be grateful. It'd be nice to just be running the scripts manually again.

I'm going to guess that the find is simply part of locate's periodic update process - it takes an inventory of files on the disk so that you can find them easily using the locate command.
It might not be, though - there are many other reasons why find may be running.
The trick is to use ps in the terminal along with a couple of switches to reveal the true cause.
In this case ps -axjw is probably what you're looking for. The -j switch tells it to print the processes' PID information, including its parent. You should see something like:
# ps -axjw | grep find
user 22423 22420 22420 44c4618 1 R s003 0:07.27 find -s /
In this case you can see one find process running, PID 22423, launched by user user. In addition, it's parent process is 22420 (the third column), so now you re-run ps asking for that PID via the -p switch:
ps -jwp 22458
USER PID PPID PGID SESS JOBC STAT TT TIME COMMAND
user 22420 21324 21324 44c4618 1 S s003 0:00.03 /bin/sh /usr/libexec/locate.updatedb
So putting this together, the first ps finds the PID and the Parent PID of the find command. The second command finds out what that parent command is. You can repeat the second command to work all the way back up the process tree if you like.

Find Processes,Notification Rules whether these functions exists in 11.5.9?

We are not able to use these functions
Find Processes, Notification Rules, Submit Requests, Universal In-Box, Worklist Portlet, Worklist Region.
How we can know whether Oracle removed these functions in their menus.
When searched in metalink not able to find any clues
Thanks
Mohan.

hi,
I just pruchased new lumia 620 with windows 8 update, and by using it, I will suggest if you are the person who want to personalize the phone according to your wish, and want products and apps or wants to see your files or folders or also goog quality photo with different picture quality options and then if you want a good sound quality form speakers as well as from earplug then please don't go for nokia lumia.. there are various phone in market some even cost less with great features and freedom.
The question you raised in your post are 98% right..
and one more thing, if still you want to go for it, you must have a 3g connection cause this phone does not work without internet.
They are saying that in window 8 amber release, some fixes will be there.. but those fixes are only for social networking, more apps some extra option of network settings... but not useful...
Rest is your will.. I am getting frustrated with this phone..
thnks
Samarjeet singh

I'm a new PSE 12 user, would like to find a step by step guide to import photos

Marco here, I'm a new PSE 12 user, and would like to find a step by step guide to import my thousands of photos, which are on my hard drive. Want to get it right the 1st time. Thank you.
Been searching for hours on Adobe help, Linda videos etc. Thank you !
Marco

I have decided that my external HD wasn't organized enough and spent days making folders of special events and by years.
I will point out that none of this organizing in your operating system is necessary, it can be done in Lightroom as well, and you can organize in Lightroom with tools that you don't have in your operating system, tools that are more powerful than your operating system, and tools that were specifically designed for photos (which folders were not). These tools are keywords, captions and other metadata. My suggestion is that instead of moving photos and folders from one place to another to achieve organization, you instead use keywords, captions and other metadata to achieve organization.

Some fields are missing in Current Task - Designer Workflow Approval Task Process

Hi All,
I am using approval task process activity in designer workflow. When i go to the single task behaviour page, some fields are missing under Current Task Source.
Some missing fields are :
1. Assigned To
2.External participants
3. Form Urn
I am trying to get the above fields but not available. What could be the issue?
Puli Bala

Hi Puli,
I think your task list is corrupted, could you please try to associate your workflow to another task list in SharePoint Designer > Click Workflows on left navigation > Click to open your workflow > Under Settings section, select another task
list and test.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

Find Process order status

Hi,
i would like to know how can we find process order status .
Example OPEN -COR3 TCODE - Enter PO---
list of fields
PO -
MATERIAL -
STATUS -
BESIDE this status icon is there, if we click it it displays list of status.
i want this data where it was stored.
Thanks
Ramakrishnaiah

Hi Rama,
check this table AUFK
Order status - AUFK-ASTNR
Regards,
Sachin

How to find business process diagrams of SAP reference model

hello guys,
I am reading book 'SAP R/3 Business Blueprint: Understanding Enterprise Supply Chain Management' recently. In this book, the author shows many EPC process diagrams of SAP reference model,but how could I find the process diagrams in SAP system.
I google this 'SAP Reference model', and find transaction: SB09 Business Navigator-Process view. But I can not find this transaction in IDES4.7or ECC6 IDES.
Thanks.
Edited by: Justin on Jul 2, 2009 10:20 AM

Hi RK v ,
I really don't know what your actual requirement is , but if you want to know the objects as per the modification , then transport request will be much help to you .
Have a look into table E070 and E071 .
Regards ,
Yogendra Bhaskar

Finding Process Code for a message Type

Hi,
Is there any way to find process code for a specific message type.
Message Type WFRESOURCE_CHANGEAVAILABILITY

Hi Swathi,
I have already mention the process codes that can be used for this message type. For your convenience i am also attaching th description ,which process code can be used when.
ABI_AIDN_IN     Auto- ID Idoc process
ED00                Display Idoc using work item
ED00_XML        Display idoc using work item (xml)
ED08                Forward idoc
ZABI_DLV_IN    Delivery advice ( AIDDESADV with DELVRY04)
Regards
Vinod

"find" process"

What does the "find" process do? Spotlight isn't indexing nor are time machine or idisk doing anything at the time, but "find" is using 75% of CPU.
I had opened up Activity Monitor to look at something else and found the find process using up 75% of the process, then makwhatis came on and "find" settled down.

Just to add a bit, you happened to look at Activity Monitor when the weekly maintenance script was running. That one updates the locate database (which runs find to create the database), and then moves on to rebuild the "whatis" database. Depending on much stuff you have it may take awhile to run.
Francine
Francine
Schwieder

Finding Processes Owned by Role

Hi,
I have a workflow process that is owned by a role (set up using wf_engine.SetItemOwner). I have a user who is assigned the role in question. However, it is not possible for the user to retrieve the process using the Find Processes screen because they are only able to retrieve that processes for which they are the owner.
Surely the user should be able to retrieve the processes that are owned by a role to which he/she is assigned???
Thanks,
Gavin

Gavin,
Yeah, currently the find processes screen will display only those processes owned by the user or any processes which do not have any ownership specified.
Raja

Find Processes

Hello,
When I click on "Find Processes" the "Begin Date" field is not listed in any particular order. Is there any way I can get the "Begin Date" field to display in descending order as I usually only need to see the most recent process.
Thanks
Cath

Hi,
Processes are listed order by their item key value.
You need to alter WF_HTML procedures to order by date and not boy item key value. It is not difficult to do if you know a little bit of plsql procedures.
Regards,
Luiz

Finding process steps from BPR - some process steps missing SAP tcodes

Similar Messages

Maybe you are looking for